nold/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate synced 2024-12-22 11:21:23 +00:00
Code Issues Projects Releases Packages Wiki Activity
1406 commits 2 branches 75 tags 7 MiB
Commit graph

1406 commits

This branch
This branch
All branches
Author SHA1 Message Date
CTCaer
b123571c56 bdk: sdmmc: only allow power raise if SDR50 and up 
As per spec.
 2023-03-31 08:26:19 +03:00
CTCaer
b7164a629f bdk: sdmmc: allow max power limit to be set 
Even if it defaults to 1.44W.
Some cards' firmware maybe be bugged.

The 3.3V regulator on all SKUs allow more than 800mA current anyway.
 2023-03-31 08:24:52 +03:00
CTCaer
25be98b7e3 bdk: sdmmc: add UHS DDR50 support 
But disable it by default in the auto selection.
 2023-03-31 08:23:10 +03:00
CTCaer
76a5facbc3 bdk: clock: rename clock_t to clk_rst_t 
To avoid redefines when standard math header is used.
 2023-03-31 08:18:45 +03:00
CTCaer
502fc1ed50 bdk: sdmmc: rename ddr100 to the actual HS100 name 2023-03-31 08:15:40 +03:00
CTCaer
5e134ed54b bdk: sdmmc: refactor defines 2023-03-31 08:00:14 +03:00
CTCaer
4cfe5f241e bdk: sdmmc: remove eMMC OC 
Additionally, the flag BDK_SDMMC_OC_AND_EXTRA_PRINT is now just BDK_SDMMC_EXTRA_PRINT
 2023-03-31 07:55:17 +03:00
CTCaer
9a222e0e49 bdk: sdmmc: rename divisor param to card clock 2023-03-31 07:53:46 +03:00
CTCaer
298893f404 bdk: sdmmc: remove powersave arg from sdmmc init 2023-03-31 07:51:43 +03:00
CTCaer
1ce5bb10f8 bdk: sdmmc: refactor debug prints 2023-03-31 07:49:26 +03:00
CTCaer
107fbd1d24 bdk: gpio: add debounce set function 
The debounce time is not per pin but per bank. So software should manage proper time for sibling pins
 2023-03-31 07:43:16 +03:00
CTCaer
1edb6583ac bdk: gpio: reorder gpio config 
Since there are some bootloaders that mess with the states of some power gpios, reorder gpio configuration for input/output in order to prevent power pin glitches.
 2023-03-31 07:41:50 +03:00
CTCaer
5bdf323e5c Bump hekate to v6.0.2 and Nyx to v1.5.2 2023-02-23 01:25:19 +02:00
CTCaer
d286ee4e9d bdk: sd: only clear inserted when requested 
Also rename var to further explain its usage
 2023-02-23 01:25:05 +02:00
CTCaer
17cdd5af0d bdk: hwdeinit: restore order of bpmp clock set 
Restore order of bpmp clock scale down in deinit, in order to decrease pressure on clock deinits.
 2023-02-22 14:48:43 +02:00
CTCaer
26fa363ca4 nyx: reset SD speed to SDR104 if init fails 2023-02-22 13:46:50 +02:00
CTCaer
2e8bfc1f56 hos: add 16.0.0 support 2023-02-22 13:45:46 +02:00
CTCaer
07dafe8185 nyx: fix pkg1 dump/split 
Broken since v5.3.1.
 2023-02-22 13:24:49 +02:00
CTCaer
7f92f65c26 fatfs/nyx: set minimum year to 2023 2023-02-22 13:23:40 +02:00
CTCaer
55e01ca735 bdk: sd: improve init error handling 
- Management of sd init done is now on sd init retry function
 Also manages inserted, since it can set the sd init done to false if failed
- Init will now always check if SD is also initialized, since it doesn't manage it anymore. Because of that, mounting is no longer forced, but checked first.
- Unmount/End will now always set the sd as unmounted, since no data residue is expected after the fact

The above will improve handling of faulty SD cards or faulty SD readers.
 2023-02-22 13:19:12 +02:00
CTCaer
a44a4881d4 hekate/nyx: stylistic and copyright updates 2023-02-22 13:04:42 +02:00
CTCaer
c279fa2521 bdk: max77621: ckkadv is basically an enum 2023-02-22 13:00:36 +02:00
CTCaer
0f6f5f06c7 nyx: improve FS error handling on init 
In case of FS corruption or SD issues, do the following:
- Try 2 times to init SD.
- Try 2 times to load resources
- Fatal if fail with an error message.
 2023-02-12 00:17:24 +02:00
CTCaer
8600174d66 nyx: info: improve sd power limits info 2023-02-12 00:00:26 +02:00
CTCaer
a6d7fa7fe1 nyx: disable reboot to OFW button if autorcm 2023-02-11 23:59:30 +02:00
CTCaer
c9405680f2 nyx: update bpmp clock manage 
- Test max clock on T210B01 also
- Add 3rd mode with lower clock. Manually applied only.
- Test max clock for 10s instead of 5s
 2023-02-11 23:56:16 +02:00
CTCaer
64dac28073 hekate: allow accessing launch options without ini 2023-02-11 23:52:43 +02:00
CTCaer
5193416658 hekate/nyx: stylistic corrections 2023-02-11 23:51:43 +02:00
CTCaer
9a98c1afb9 bdk: stylistic corrections 
And update copyrights
 2023-02-11 23:46:38 +02:00
CTCaer
361aaf8629 l4t: disable AHB aperture and pllc war 
We don't need AHB aperture after that point and new deinit fixes the pllc init issue on L4T boot.
 2023-02-11 23:25:22 +02:00
CTCaer
080e3e2aa7 hos: disable AHB aperture before secmon launch 
Seems that old secmon were missing that and it may cause bad behavior on boot.

Only affects stock old secmon versions.
 2023-02-11 23:22:53 +02:00
CTCaer
72abe60a3b bdk: hw init: remove support for broken hwinits 
It's 2023 already.
 2023-02-11 23:19:56 +02:00
CTCaer
ee682fdf24 bdk: l4t: minerva: don't rely on UB 2023-02-11 23:17:27 +02:00
CTCaer
42859a2373 bdk: usb: ums: print errors when sdmmc init fails 2023-02-11 23:16:37 +02:00
CTCaer
22bdd0e0ff bdk: sdmmc: remove unused power limits 
Also name some magic numbers
 2023-02-11 23:15:28 +02:00
CTCaer
114abba815 bdk: hw init: do not touch audio clocks on t210b01 2023-02-11 23:13:41 +02:00
CTCaer
ec8c04db8a bdk: bpmp: add 563MHz clock for worst binnings 2023-02-11 23:12:14 +02:00
CTCaer
4d7eb6a647 bdk: clock: improve pllc deinit 2023-02-11 23:11:24 +02:00
CTCaer
fd3cf1b7f8 bdk: reg-5v: remove X3 pin 
X3 is vbus enable on mariko.
 2023-02-11 23:10:43 +02:00
CTCaer
47f0734ba0 bdk: display: add more oled color mode info 2023-02-11 23:09:38 +02:00
CTCaer
5bb9a244ea bdk: utilize new gpio functions 2023-02-11 23:08:32 +02:00
CTCaer
05b5e4f297 bdk: gpio: add simple gpio direction functions 2023-02-11 22:55:22 +02:00
CTCaer
4e15e034b8 bdk: sdram: remove (lp)ddr2/3 support 2023-02-11 22:44:31 +02:00
CTCaer
ee3fc499cd bdk: bm92t36: add sanity checks 
If bm92t i2c comms are broken, it can hang hekate. So sanitize buffer and max profile print supported.
 2023-02-11 22:40:47 +02:00
CTCaer
f9e99212fc Bump hekate to v6.0.1 and Nyx to v1.5.1 2022-12-22 12:39:51 +02:00
CTCaer
1666daf447 l4t: fix several issues 
- Fixed an issue where cached data would not be flushed after setting the fw carveout. Now they are flushed before setting it.
- Fixed and off-by-one bug and setting incorrect number of mtc entries.
 2022-12-22 12:37:56 +02:00
CTCaer
cfbfe403c6 bdk: di: wait 8ms before setting window for vic 2022-12-22 12:32:05 +02:00
CTCaer
47784faab2 Bump hekate to v6.0.0 and Nyx to v1.5.0 2022-12-20 17:01:42 +02:00
CTCaer
a2a302b9d5 l4t: Add L4T loader for T210 and T210B01 2022-12-20 17:00:33 +02:00
CTCaer
50dd458cfd bdk: ums: use emmc_end instead of sdmmc_storage_end 2022-12-20 16:55:16 +02:00