CTCaer
cabaa6cfb8
Utilize BIT macro everywhere
2020-11-26 01:41:45 +02:00
CTCaer
e45ffab5d8
Remove stray hekate cfg set. It's handled by default.
2020-11-15 14:00:35 +02:00
CTCaer
55568b037f
nyx: Properly calculate Ranks and Channels in hw info
2020-11-15 13:50:19 +02:00
CTCaer
b5df428e43
nyx: Create bootloader folder on screenshots if missing
2020-11-15 13:47:47 +02:00
CTCaer
67a03bbd85
eks: Use LOT0 for identification
2020-11-15 13:43:22 +02:00
CTCaer
32955380c7
nyx: Fix icons for backup/restore swap
2020-11-15 13:40:53 +02:00
CTCaer
485edb4883
emc: Rename Device to Rank
2020-11-15 13:23:37 +02:00
CTCaer
8f222fd0bd
main: Fix update.bin creation on first boot
2020-10-27 21:27:51 +02:00
CTCaer
1f5b371608
Refactor some names
...
Additionally:
- Do not retry to init sd if all modes failed in Nyx.
- Do not try to read/write if sdmmc controller and card are not initialized.
2020-10-23 06:32:24 +03:00
CTCaer
ce156ab4e7
hos: Automate some eks and bis checks
2020-10-20 11:53:28 +03:00
CTCaer
94235dd005
bm92t30: Add proper info
...
The driver will now show more charger supported profiles and will also show selected profile.
2020-10-20 10:42:57 +03:00
CTCaer
27b1f0e843
Various small fixes
2020-10-20 10:32:32 +03:00
CTCaer
dae7be8ec4
nyx: Allow disabling of Joycon
...
Setting `jcdisable=1` in nyx.ini disables the usage of Joycon completely.
This also disables the BT pairing data dumping tool.
2020-10-20 10:21:48 +03:00
CTCaer
2f5b52223c
config: Add bootloader protection
...
`bootprotect=1` enables protection of the `bootloader` folder inside HOS.
This disallows any reading/writing of the folder and its contents inside HOS, preventing any corruption of it.
This of course has the side-effect of homebrew that depend on it (e.g. hekate Toolbox) to not work fully.
2020-10-20 10:16:12 +03:00
CTCaer
e3e5dab0fc
nyx: Add USB Charger info
2020-09-15 20:14:56 +03:00
CTCaer
e7900b11b4
nyx: Allow L4T last part to be unaligned
2020-09-02 13:11:03 +03:00
CTCaer
461d14c39a
di: Correct panel id for AUO A062TAN02
2020-08-28 05:26:18 +03:00
CTCaer
3d05b58856
nyx: Add eMMC NAND cells life estimation
2020-08-15 12:33:11 +03:00
CTCaer
78c4e6510d
hos: Add backup bootloader support
2020-08-15 12:30:18 +03:00
CTCaer
cd76d5ac09
nyx: Fix hang on using B button after Launch window
2020-08-15 12:22:01 +03:00
CTCaer
9c2a064817
nyx: Allow SD removal without reloading Nyx
2020-08-15 12:21:25 +03:00
CTCaer
db2da89f69
nyx: Remove delay on JC calibration
...
This does not help with drifting as the logged values are always changing drastically.
2020-08-15 12:19:43 +03:00
CTCaer
4fc420616d
nyx: Control UART debug completely via makefile
...
Also enables LvGL log.
2020-08-13 10:21:00 +03:00
CTCaer
5140992a7b
nyx: Add proper info about SD write protect
2020-07-19 20:56:08 +03:00
CTCaer
b8ca88ee0a
exo: Change fatal names and add stack overflow
2020-07-18 12:53:05 +03:00
CTCaer
adfa7c0780
fuse: Use fuse count function for burnt fuses
2020-07-18 01:15:28 +03:00
CTCaer
11df6030f9
Various fixes
2020-07-18 00:54:35 +03:00
CTCaer
32e58d2bb3
hw init: Cosmetic refactoring
2020-07-17 18:08:27 +03:00
CTCaer
638a3909c5
Refactor various variables and names
2020-07-17 18:00:32 +03:00
CTCaer
3c2d86ef7b
sdmmc: Add protected area info (Content Protection)
2020-07-17 17:01:40 +03:00
CTCaer
f559017aeb
di: Update display panels and info
2020-07-17 16:57:45 +03:00
CTCaer
3ddd1c26ad
pkg1: Fix PK11 component split in pkg1/2 dump tool
2020-07-14 23:29:48 +03:00
CTCaer
ab5b59e10d
Refactor fatal/hard error names
2020-07-14 22:41:48 +03:00
CTCaer
1f67251331
nyx: Use strcat whenever possible
2020-07-14 22:26:40 +03:00
CTCaer
4eecdfa553
nyx: Add decrypted CAL0 dumping
2020-07-14 21:16:52 +03:00
CTCaer
80dd0f1580
joycon: Skip first 4 packets for calibration
2020-07-14 21:13:37 +03:00
CTCaer
4e0c70a402
nyx: Do not timeout joycon with screenshot
...
Additionally, screenshots are allowed only every 2s instead per second.
2020-07-14 21:12:09 +03:00
CTCaer
ddc89c9f49
hos: Reduce size of pkg1 id array
2020-06-22 12:04:49 +03:00
CTCaer
3214fc2f93
nyx: Fix validation check for emuMMC restore
...
When checking a partition for enough size for emuMMC restore, always check against the extra 16MB.
2020-06-18 01:23:06 +03:00
CTCaer
3b0925b912
touch: Check if init failed and stop parsing if yes
2020-06-17 00:41:37 +03:00
CTCaer
564f36fc8b
hos: Fix mkey validation on BIS derivation
2020-06-15 17:31:29 +03:00
CTCaer
6159284be6
nyx: Check for huge files in part manager backup
2020-06-15 15:05:47 +03:00
CTCaer
9afc6f0a4e
joycon: Add bigger deadzone for virtual mouse
2020-06-15 15:04:46 +03:00
CTCaer
f689bb253e
nyx: Add simple CAL0 info
2020-06-15 15:03:14 +03:00
CTCaer
0738c96867
nyx: Fix pkg1/2 dumping with new changes
2020-06-15 15:01:18 +03:00
CTCaer
edba8ca986
hos: Add BIS keys derivation
2020-06-15 14:59:45 +03:00
CTCaer
2aa9055fae
Various fixes
2020-06-15 14:58:50 +03:00
CTCaer
029d66bd95
Fix build for lvgl UART log
2020-06-14 17:33:57 +03:00
CTCaer
c73b4ad6ba
nyx: Include Hoag as Mariko in fuses info
2020-06-14 16:51:06 +03:00
CTCaer
6e256d29c7
Utilize hekate's BDK for hekate main and Nyx
2020-06-14 16:45:45 +03:00
CTCaer
185526d134
Introducing Bootloader Development Kit (BDK)
...
BDK will allow developers to use the full collection of drivers,
with limited editing, if any, for making payloads for Nintendo Switch.
Using a single source for everything will also help decoupling
Switch specific code and easily port it to other Tegra X1/X1+ platforms.
And maybe even to lower targets.
Everything is now centrilized into bdk folder.
Every module or project can utilize it by simply including it.
This is just the start and it will continue to improve.
2020-06-14 15:25:21 +03:00
CTCaer
9b1c61fbcf
storage: Add cal0 struct
2020-06-14 14:11:15 +03:00
CTCaer
ae7ef7d79a
fuse: Add get odm keygen type
2020-06-14 14:10:29 +03:00
CTCaer
273f11cd59
sdram: Extend sdram id
2020-06-14 14:07:21 +03:00
CTCaer
f5092bc981
heap: Add heap object copy
2020-06-14 14:02:13 +03:00
CTCaer
d607a8830b
hos: Support new sept/exo keyslots
2020-06-14 13:53:21 +03:00
CTCaer
92d013dd65
eks: Upgrade to new version and support BIS keys
2020-06-14 13:42:48 +03:00
CTCaer
242bbdada5
storage: Better BIS support
...
It now supports more than one crypto block and keys are expected to slot 0 and up to slot 5.
2020-06-14 13:36:36 +03:00
CTCaer
d95449c22d
usb: Fix some issues with usb descriptors
2020-06-14 13:33:13 +03:00
CTCaer
4d8dbe068d
sept: Remove support for obsolete no _00/01 suffix
2020-06-14 13:25:08 +03:00
CTCaer
157e415636
uart: Decreases timeouts to reduce latency
2020-06-14 13:21:59 +03:00
CTCaer
48f84c5cf4
gpio: Remove dependency to irq driver
2020-06-14 13:20:56 +03:00
CTCaer
1d3d1c8454
clock: Prevent PLLC4 from glitching
2020-06-14 13:19:53 +03:00
CTCaer
bb2b339b54
ianos: Remove sd (un)mount usage
2020-06-14 13:17:26 +03:00
CTCaer
5790c585f5
nyx: Reduce idle power draw by 280mW
2020-06-14 13:14:32 +03:00
CTCaer
a2655912d4
nyx: Auto center cursor based on its size
2020-06-14 13:13:27 +03:00
CTCaer
e2c905e9b2
joycon: More robust spi dumping for bd addr/ltk
2020-06-14 13:13:04 +03:00
CTCaer
9619417b07
nyx: Allow arc bits tool to work on all compat folders
2020-06-14 13:09:10 +03:00
CTCaer
b0bcdeafac
nyx: Find best cluster size automatically
2020-06-14 13:07:42 +03:00
CTCaer
7b76015fd1
nyx: Fix an issue with hos partition initial size
2020-06-14 13:07:21 +03:00
CTCaer
465955c8f5
nyx: Use sd actual size for partition making
2020-06-14 13:06:43 +03:00
CTCaer
90a759b98e
Use reconfig workaround for power off and reboots
2020-06-14 13:05:51 +03:00
CTCaer
0096b91146
Add corrupted bmp protection
2020-06-14 13:04:13 +03:00
CTCaer
125f000894
nyx: Use date/time for screenshot names
...
Now that RTC clock can be offset in software it's good to have actual dates on screenshots.
2020-06-14 13:02:54 +03:00
CTCaer
f9a0e6ce4f
nyx: Show clock edit on boot if 0 offset
2020-06-14 13:00:55 +03:00
CTCaer
0d5a1416d0
nyx: Show SD card total blocks in info
2020-06-14 12:59:41 +03:00
CTCaer
43f3132069
nyx: Do not show SFD partitions as valid for emuMMC
2020-06-14 12:53:35 +03:00
CTCaer
3d00a1be21
nyx: Support multiple backup based emuMMC
2020-06-14 12:52:54 +03:00
CTCaer
87ce09f4b1
Some fixes
2020-06-14 12:50:54 +03:00
CTCaer
31f90a0a47
se: Fix CBC encryption
2020-06-14 03:10:30 +03:00
CTCaer
af30904624
se: Simplify oneshot execute calls
2020-06-14 03:10:04 +03:00
CTCaer
f2f995af17
se: Allow sha256 continuation without saving the msg
2020-06-14 03:08:27 +03:00
CTCaer
3dcd2ad15f
hos: Header for pkg2 is now more proper
2020-06-14 02:23:02 +03:00
CTCaer
eb2c8a032f
power: Enable charger unconditionally
2020-06-14 02:04:50 +03:00
CTCaer
416db840ec
power: Refactor max17050 driver
2020-06-14 02:03:43 +03:00
CTCaer
b0c4cef077
power: Fix max77621 DVS voltage reg names
2020-06-14 02:02:26 +03:00
CTCaer
58d12e5754
power: Refactor bq24193 driver
2020-06-14 02:01:26 +03:00
CTCaer
bcda64a5df
tsec: Decouple hos header dependency
2020-06-14 01:32:54 +03:00
CTCaer
ba77de3dc5
exo: Refactor exo_cfg context to exo_ctx
2020-06-14 01:29:41 +03:00
CTCaer
53325617bb
hos: Small refactoring
2020-06-14 01:27:08 +03:00
CTCaer
8e836d958f
Rename cluster to ccplex
2020-06-14 01:09:17 +03:00
CTCaer
21548545fc
Equalize hekate main and Nyx sd based functions
2020-06-13 18:32:40 +03:00
CTCaer
7dd3178d48
Equalize hekate main and Nyx common functions
2020-06-13 18:16:29 +03:00
Dave Murphy
cc54df87d7
fixes for compiling with gcc 10
...
gcc 10 no longer lets you get away with not externing global variables in header files. This adds the necessary extern and adds defines in appropriate c files
2020-05-08 23:32:44 +01:00
CTCaer
9698cbc9d7
nyx: Fix archive bits fixer and extention folders
2020-05-05 21:24:28 +03:00
CTCaer
d8b6aa3831
nyx: Correct the error message for format
2020-05-05 19:28:34 +03:00
CTCaer
3e5ef39686
nyx: Fix emummc slider when there's not enough space
2020-05-05 19:28:15 +03:00
CTCaer
bc7c65447d
nyx: Add start clearing for ext4 partitions
2020-05-05 19:27:45 +03:00
CTCaer
a91378b9c1
nyx: Allow always writeable emmc via config
...
The key is `umsemmcrw` and resides in nyx.ini
2020-05-05 19:26:10 +03:00
CTCaer
5b91c54936
fatfs: Backport some fixes
2020-05-05 19:21:07 +03:00
CTCaer
322280757f
nyx: Fix time offset parsing
2020-05-05 19:20:04 +03:00
CTCaer
b1636fbb96
nyx: Add unsaved config changes pop up
2020-05-05 19:19:12 +03:00
CTCaer
cc18a7b146
nyx: Allow changing Date/Time via tickers
2020-05-05 19:17:29 +03:00
CTCaer
5fe84a78ac
rtc: Remove custom encoding
2020-05-05 19:16:16 +03:00
CTCaer
822e0dcd98
Various small fixes
2020-05-05 19:11:39 +03:00
CTCaer
a6be3714a3
ums: Update Nyx status bar during UMS
2020-05-05 19:02:01 +03:00
CTCaer
f56d1bad04
nyx: Allow hue icons from section names
2020-05-05 19:01:08 +03:00
CTCaer
8edc9971f9
nyx: Refactor launch icon colorization
...
The Switch and Payload icons will be colorized by default, because they are system icons.
Users can still replace them with icons named `icon_switch_custom.bmp` and `icon_payload_custom.bmp` that do not get colorized.
2020-05-03 01:57:15 +03:00
Nichole Mattera
afb820202d
Small fix to make sure icon_path is long enough.
2020-05-02 16:34:06 -04:00
Nichole Mattera
0ce973966f
Add support for launch icons changing color with theme.
2020-05-02 16:16:38 -04:00
CTCaer
11ca71cbc7
joycon: Wait for disconnect cmd reply
2020-05-01 17:29:05 +03:00
CTCaer
3794c61ab2
Mitigate a L4T Joy-Cond driver issue
2020-05-01 17:28:24 +03:00
CTCaer
dde3ca2d73
sdmmc: Properly disable parent clock
2020-05-01 03:41:00 +03:00
CTCaer
4d1b59c05b
Update Readme
2020-04-30 16:33:14 +03:00
CTCaer
a0c3323b7c
nyx: Allow emuMMC backup now that is working
2020-04-30 16:29:03 +03:00
CTCaer
c9e53d4b1d
nyx: Decrease idle power drain
2020-04-30 16:27:40 +03:00
CTCaer
4b62b1f69f
nyx: Introducing Partition Manager for SD Card
...
Allow you to select up to 2 emuMMC + Linux + Android.
Any combo is allowed, even if you just want to repartition it back to one FAT partition.
The procedure is automatic on selecting sizes and offsets.
The tool is also able to backup your SD Card into Ramdisk and then get restored, if the total used size is less than 1GB.
If you have more files than that, you will be asked to copy your files to your PC via UMS.
It also allows you to flash L4T Linux images and Android Twrp images.
The Flash Android can be also used to reboot into Twrp if a file to flash is not found.
2020-04-30 16:12:55 +03:00
CTCaer
91c2c891fd
nyx: Fix verification bar/percent not updating
2020-04-30 15:13:12 +03:00
CTCaer
1ba0a7d264
nyx: Allow restoring eMMC backup of different size
...
You will get a warn. If you choose to skip without reading it, then you are toasted.
2020-04-30 15:12:34 +03:00
CTCaer
5f6bf332d3
nyx: Add emuMMC partition backup
...
For now it will automatically dump the first found and the size will be based on its GPT.
2020-04-30 15:11:18 +03:00
CTCaer
448cc49cff
hwinit: Add proper deinit for new components
2020-04-30 15:09:25 +03:00
CTCaer
81f0c0a0dc
touch: Add FB SRAM read function
2020-04-30 15:06:31 +03:00
CTCaer
95c1046765
nyx: Add eMMC and SD read benchmarks
2020-04-30 15:05:41 +03:00
CTCaer
2a8c27115c
fatfs: Use RTC clock for date/time
2020-04-30 15:04:52 +03:00
CTCaer
b6933013be
storage: Add primitive BIS support
2020-04-30 15:04:20 +03:00
CTCaer
a2bb576c03
fatfs: Add Ramdisk support
2020-04-30 15:03:25 +03:00
CTCaer
c8d6da5a23
storage: Add Ramdisk driver
2020-04-30 14:58:53 +03:00
CTCaer
f09263d3be
nyx: Add Update r2p option
2020-04-30 14:56:44 +03:00
CTCaer
fdfd383c34
nyx: Add Joy-Con Bluetooth pair info dump
2020-04-30 14:55:51 +03:00
CTCaer
39a32fc83d
nyx: Add Nyx Options (Theme, Homescreen, Time)
2020-04-30 14:55:15 +03:00
CTCaer
c072041039
nyx: Add time offset
...
The epoch is based on HOS format.
An automatic time set will be implemented in a later version.
2020-04-30 14:51:48 +03:00
CTCaer
6d75f96ed5
nyx: Add Home Screen selection
...
You can now choose between Main menu and Launch/More Cfg as home screens.
2020-04-30 14:49:28 +03:00
CTCaer
ab304c9178
nyx: Small fixes in init
2020-04-30 14:45:59 +03:00
CTCaer
abcb1dec46
boot cfg: Allow Launching UMS from boot.
...
By using `BOOT_CFG_AUTOBOOT_EN` in `boot_cfg` and `EXTRA_CFG_NYX_UMS` in `extra_cfg` you can launch UMS from boot.
The `ums` variable must be populated with one of the following:
```
NYX_UMS_SD_CARD 0
NYX_UMS_EMMC_BOOT0 1
NYX_UMS_EMMC_BOOT1 2
NYX_UMS_EMMC_GPP 3
NYX_UMS_EMUMMC_BOOT0 4
NYX_UMS_EMUMMC_BOOT1 5
NYX_UMS_EMUMMC_GPP 6
```
2020-04-30 14:44:27 +03:00
CTCaer
ac4bf9cf2c
nyx: Add tab separator for Tools tabs
2020-04-30 14:32:52 +03:00
CTCaer
72a51f9506
nyx: Add Touch Panel Calibration tool
2020-04-30 14:31:32 +03:00
CTCaer
d50a77f861
nyx: Fix Archive bits tool v3
2020-04-30 14:30:37 +03:00
CTCaer
0ecd6b16b0
nyx: USB Gamepad emulation (Joy-Con)
...
This allows you to use your joycon as a free gamepad for your PC. Often paired with tools like x360ce.
2020-04-30 14:28:16 +03:00
CTCaer
4dcbaa8c2b
Update Clocks and Fuses for USB
2020-04-30 14:25:58 +03:00
CTCaer
2261dbce83
nyx: USB Mass Storage support (SD/eMMC/emuMMC)
2020-04-30 14:25:43 +03:00
CTCaer
53ff1102df
usbd: Add device descriptors
2020-04-30 14:15:50 +03:00
CTCaer
b01b49aff4
usbd: Add USB Gadget HID driver
2020-04-30 14:15:26 +03:00
CTCaer
c9a7659d93
usbd: Add USB Gadget UMS driver
2020-04-30 14:14:58 +03:00
CTCaer
4f75cd62e5
usb: Add USB Device driver
2020-04-30 14:14:16 +03:00
CTCaer
2a74715c3c
Update some copyrights
2020-04-30 14:10:08 +03:00
CTCaer
1210c3e689
nyx: Add log window screenshots for debugging
2020-04-30 14:09:11 +03:00
CTCaer
a3f430c224
nyx: Add capture effect on screenshots
2020-04-30 14:08:25 +03:00
CTCaer
2f7be43ccb
nyx: Allow screenshots only every 2s
2020-04-30 14:08:06 +03:00
CTCaer
f5432c734c
nyx: Utilize Log Window
...
- or + on Joy-Con displays the log screen.
If there are errors somewhere, they are normally also logged in there.
2020-04-30 14:07:26 +03:00
CTCaer
5ca35aa4fc
memory map: Repartition RAM based on new needs
2020-04-30 14:03:57 +03:00
CTCaer
2dd474ad26
gfx: Switch Nyx gfx prints to landscape
2020-04-30 14:01:10 +03:00
CTCaer
97e45346ea
display v2: Utilize Window D as log window
2020-04-30 13:58:41 +03:00
CTCaer
6c1ce41900
display v2: Add Cursor Window
2020-04-30 13:57:43 +03:00
CTCaer
4a57901746
display v2: Always check if already initialized
2020-04-30 13:55:26 +03:00
CTCaer
c32636b8cb
nyx: Fuses info is now HW and Fuses info
...
Additionally add chip revision info
2020-04-30 13:54:11 +03:00
CTCaer
190ffdaa5a
nyx: Add DRAM modules info
2020-04-30 13:51:46 +03:00
CTCaer
bdd2b40c96
nyx: Add Touch panel info
2020-04-30 13:51:25 +03:00
CTCaer
53f54cf23b
nyx: Add display panel info
2020-04-30 13:50:58 +03:00
CTCaer
474d531788
display v2: Add multiple panel support
2020-04-30 13:49:03 +03:00
CTCaer
3db55df0a6
display v2: Refactor everything
2020-04-30 13:45:28 +03:00
CTCaer
1483a61f11
nyx: Add joycon fallback support as a virtual mouse
...
Cursor Movement: Left Stick
Click: A / ZL / ZR
Back: B
2020-04-30 13:16:30 +03:00
CTCaer
7b715f7be9
input: Add Joy-Con UART driver
2020-04-30 13:02:14 +03:00
CTCaer
56034f9aac
nyx: Ensure that close button var always gets nulled
2020-04-30 04:32:55 +03:00
CTCaer
7e96a4dd3a
nyx: Keep last close button to a var
2020-04-30 04:25:51 +03:00
CTCaer
523c81f797
nyx: Add theme colors for highlight text
2020-04-30 04:04:24 +03:00
CTCaer
f540c8250b
nyx: Disallow eMMC ops with low battery
2020-04-30 03:59:16 +03:00
CTCaer
e89b7f12dd
nyx: Update hekate theme
2020-04-30 03:57:10 +03:00
CTCaer
11f1f65ed1
rtc: Fix hour parsing
2020-04-30 03:53:29 +03:00
CTCaer
071dfa9792
lvgl: Enable keyboard and add HEX mode
2020-04-30 03:53:04 +03:00
CTCaer
3cecb03dac
nyx: Fix a long standing heap corruption issue
2020-04-30 03:51:13 +03:00
CTCaer
a7c64f8ba2
lvgl: Better heap alignment
2020-04-30 03:49:40 +03:00
CTCaer
6749dad1a4
lvgl: Fix HSV to RGB calculation
2020-04-30 03:49:10 +03:00
CTCaer
aadb88eeea
regulators: Enable 5V to missing GPIO AO IO rails
2020-04-30 03:46:21 +03:00
CTCaer
2c4d6552e9
Fixes to battery charger and fuel gauge ICs
2020-04-30 03:45:19 +03:00
CTCaer
c2e8d51115
hos: Add EKS
2020-04-30 03:43:29 +03:00
CTCaer
1d69809022
sdram: Allow killing ram clock source if desired
2020-04-30 03:39:18 +03:00
CTCaer
093f14923c
sdram: Document cfg and use vendor patches
2020-04-30 03:37:40 +03:00
CTCaer
63768ccc99
uart: Add rounded clocking for 1 mbaud
2020-04-30 03:34:05 +03:00
CTCaer
54faa38920
utils: Add normal CRC32
2020-04-30 03:30:51 +03:00
CTCaer
ae1bb909b6
se: Add prng128 generator and get aes keys
2020-04-30 03:29:05 +03:00
CTCaer
ecb616e411
sdram: Add MR read request
2020-04-30 03:27:39 +03:00
CTCaer
8c762c52e2
Various fixes and whitespace removal
2020-04-30 03:25:22 +03:00
CTCaer
e14a7d1d4d
nyx: Clear partition start when creating emuMMC
2020-04-30 02:05:24 +03:00
CTCaer
08c81fe1f8
Move verification config to nyx config
2020-04-30 02:00:33 +03:00
CTCaer
63be93be64
nyx: Use a static color for verifying bar indicator
2020-04-30 01:35:18 +03:00
CTCaer
de4891e133
nyx: Correct label styles set
2020-04-30 01:33:14 +03:00
CTCaer
8fd398f213
nyx: Fix heap corruption while parsing emmc gpt
2020-04-30 01:31:01 +03:00
CTCaer
ec53aa86dd
emmc: Use gpt struct and only add valid entries
...
Additionally keep track of partition index
2020-04-30 01:29:58 +03:00
CTCaer
51985ed2ca
sdmmc v2: Bus/IO clock refactoring and fixes
...
Use the exact same clocks with HOS and utilize low jitter clock parents.
Add back our compatibility mode and the missing timeout clock parent.
Hekate main will continue to use PLLP clock parent for all.
2020-04-30 01:26:55 +03:00
CTCaer
67ae7b9dcb
nyx: Add SD Card error report in Console Info
2020-04-30 01:09:48 +03:00
CTCaer
96654d9620
nyx: Throw a warning if SD Card in 1 bit mode
2020-04-30 01:05:22 +03:00
CTCaer
ce97b97c8d
sdmmc v2: Add full SD card fallback initialization
...
hekate main always runs in compatibility mode (SDR82).
This ensures speed on boot process.
Nyx will first try SDR104.
If the sd card is a sandisk U1 and fails, it will try the compatibility mode.
After that it fallbacks to lower bus speeds.
Both support 1bit mode for broken sd card readers.
Having the new error checking in the sdmmc driver, allows for all that to work.
It can now fail instead of continuing, like how HOS reacts.
2020-04-30 00:00:00 +03:00
CTCaer
034f680a8e
sd fs: Move sd init/mount/helpers to their own object
2020-04-29 23:20:18 +03:00
CTCaer
7d17e34dee
sdmmc v2: Add eMMC overclocking
2020-04-29 22:11:23 +03:00
CTCaer
d0a16a49b6
sdmmc v2: Add error checking for all cases
2020-04-29 22:09:36 +03:00
CTCaer
5442547a59
sdmmc v2: Name eMMC physical partitions
2020-04-29 22:06:33 +03:00
CTCaer
10e7e06048
sdmmc v2: Move address alignment check in driver
2020-04-29 21:46:25 +03:00
CTCaer
eac6426125
sdmmc v2: Driver fixes
2020-04-29 21:43:07 +03:00
CTCaer
88b01994bd
sdmmc v2: HW driver fixes
2020-04-29 21:39:03 +03:00
CTCaer
66780bb4c2
sdmmc v2: Refactor and fix registers
2020-04-29 21:23:28 +03:00