CTCaer
2f7e841b50
bdk: sdmmc: move sdr12 setup for better readability
2023-03-31 08:29:20 +03:00
CTCaer
29e32f09fb
bdk: sdmmc: properly identify sdmmc1 clk config
...
Remove schmitt trigger config from clock pin on sdmmc1 for identifying previous pinmuxing state.
2023-03-31 08:27:48 +03:00
CTCaer
25be98b7e3
bdk: sdmmc: add UHS DDR50 support
...
But disable it by default in the auto selection.
2023-03-31 08:23:10 +03:00
CTCaer
502fc1ed50
bdk: sdmmc: rename ddr100 to the actual HS100 name
2023-03-31 08:15:40 +03:00
CTCaer
5e134ed54b
bdk: sdmmc: refactor defines
2023-03-31 08:00:14 +03:00
CTCaer
4cfe5f241e
bdk: sdmmc: remove eMMC OC
...
Additionally, the flag BDK_SDMMC_OC_AND_EXTRA_PRINT is now just BDK_SDMMC_EXTRA_PRINT
2023-03-31 07:55:17 +03:00
CTCaer
9a222e0e49
bdk: sdmmc: rename divisor param to card clock
2023-03-31 07:53:46 +03:00
CTCaer
298893f404
bdk: sdmmc: remove powersave arg from sdmmc init
2023-03-31 07:51:43 +03:00
CTCaer
1ce5bb10f8
bdk: sdmmc: refactor debug prints
2023-03-31 07:49:26 +03:00
CTCaer
9a98c1afb9
bdk: stylistic corrections
...
And update copyrights
2023-02-11 23:46:38 +02:00
CTCaer
5bb9a244ea
bdk: utilize new gpio functions
2023-02-11 23:08:32 +02:00
CTCaer
4d823d5909
bdk: slight refactor
2022-12-19 05:22:55 +02:00
CTCaer
6257d20db9
bdk: emmc: add emmc_set_partition
...
Additionally, add SDMMC index info to errors.
2022-12-19 04:53:50 +02:00
CTCaer
197ce4c76f
bdk: sdmmc: timing changes
...
- Correct HS102 naming to DDR100
- Fix clock for DDR50 (even if it's unused)
2022-10-11 04:05:12 +03:00
CTCaer
70523e404f
bdk: whitespace refactor
2022-07-11 22:10:11 +03:00
CTCaer
b0c0a86108
bdk: migrate timers/sleeps to timer driver
2022-06-27 10:22:19 +03:00
CTCaer
76d1b4e221
bdk: sdmmc: refactor defines
...
And fix a bug with tuning trim values
2022-05-08 05:21:29 +03:00
CTCaer
7c74391754
bdk: bpmp: do not use full maintenance
...
Instead use proper clean/invalidation of dcache.
2022-02-15 00:14:14 +02:00
CTCaer
8327de8e2e
bdk: replace NYX flag with proper flags
...
- BDK_MINERVA_CFG_FROM_RAM: enables support for getting minerva configuration from nyx storage
- BDK_HW_EXTRA_DEINIT: enables extra deinit in hw_reinit_workaround
- BDK_SDMMC_OC_AND_EXTRA_PRINT: enables eMMC OC support (533 MB/s) and extra error printing
2022-01-20 13:19:48 +02:00
CTCaer
10e1f67dc5
bdk: utils: add strcpy with head/tail whitespace removal
2022-01-20 12:36:25 +02:00
CTCaer
d368b93fdd
sdmmc: move error prints checks inside ifdefs
2021-09-17 23:12:54 +03:00
CTCaer
38f456a2ee
sdmmc: Refactor again
...
- Refactor various variables and defines
- Removed Card/BGA and OEM ID info as they are static and useless
- Commented out bkops functions completely as not used
- Remove extra buf usage when there's already storage for storing that data
- Optimize various functions to save space
- Clean up useless or duplicate code
2021-02-06 03:41:35 +02:00
CTCaer
f6a3b2c9ac
sdmmc: Ensure writes gone through after disabling io power
2021-01-14 17:53:22 +02:00
CTCaer
745ac609d2
max7762x: Update everything to use the improved pmic management
2021-01-04 02:41:15 +02:00
CTCaer
ba984d02eb
sdmmc: Mitigate some Phison SDs which think they are SDSC
2020-12-11 17:43:01 +02:00
CTCaer
5b8fb9fb6b
Various refactoring and addition of comments
2020-12-11 17:25:59 +02:00
CTCaer
c13eabcde8
sdmmc: Add T210B01 support
...
The driver was working before this, but adding the changes provides a proper and better sdmmc controller inner state.
2020-12-02 02:07:15 +02:00
CTCaer
cabaa6cfb8
Utilize BIT macro everywhere
2020-11-26 01:41:45 +02:00
CTCaer
89a4eadab0
sdmmc: Refactor some names
2020-11-26 01:08:42 +02:00
CTCaer
1f5b371608
Refactor some names
...
Additionally:
- Do not retry to init sd if all modes failed in Nyx.
- Do not try to read/write if sdmmc controller and card are not initialized.
2020-10-23 06:32:24 +03:00
CTCaer
7b03a24196
sdmmc: Add extra error printing
2020-08-15 13:16:37 +03:00
CTCaer
82da1aaf2a
sdmmc: Correct name of bus speed 14
2020-07-17 17:38:01 +03:00
CTCaer
6e256d29c7
Utilize hekate's BDK for hekate main and Nyx
2020-06-14 16:45:45 +03:00
CTCaer
185526d134
Introducing Bootloader Development Kit (BDK)
...
BDK will allow developers to use the full collection of drivers,
with limited editing, if any, for making payloads for Nintendo Switch.
Using a single source for everything will also help decoupling
Switch specific code and easily port it to other Tegra X1/X1+ platforms.
And maybe even to lower targets.
Everything is now centrilized into bdk folder.
Every module or project can utilize it by simply including it.
This is just the start and it will continue to improve.
2020-06-14 15:25:21 +03:00