hekate/bdk/soc/hw_init.c

426 lines
15 KiB
C
Raw Normal View History

2018-11-27 09:45:43 +00:00
/*
* Copyright (c) 2018 naehrwert
* Copyright (c) 2018-2020 CTCaer
2018-11-27 09:45:43 +00:00
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <string.h>
#include <soc/hw_init.h>
#include <gfx/di.h>
#include <input/joycon.h>
#include <input/touch.h>
#include <sec/se.h>
#include <sec/se_t210.h>
#include <soc/bpmp.h>
#include <soc/clock.h>
#include <soc/fuse.h>
#include <soc/gpio.h>
#include <soc/i2c.h>
#include <soc/pinmux.h>
#include <soc/pmc.h>
#include <soc/uart.h>
#include <soc/t210.h>
#include <mem/mc.h>
#include <mem/minerva.h>
#include <mem/sdram.h>
#include <power/bq24193.h>
#include <power/max77620.h>
#include <power/max7762x.h>
#include <power/regulator_5v.h>
#include <storage/nx_sd.h>
#include <storage/sdmmc.h>
#include <thermal/fan.h>
#include <utils/util.h>
2018-11-27 09:45:43 +00:00
extern boot_cfg_t b_cfg;
2020-01-19 13:22:59 +00:00
extern volatile nyx_storage_t *nyx_str;
2018-11-27 09:45:43 +00:00
2019-09-09 13:56:37 +00:00
/*
* CLK_OSC - 38.4 MHz crystal.
* CLK_M - 19.2 MHz (osc/2).
* CLK_S - 32.768 KHz (from PMIC).
* SCLK - 204MHz init (-> 408MHz -> OC).
* HCLK - 204MHz init (-> 408MHz -> OC).
* PCLK - 68MHz init (-> 136MHz -> OC/4).
*/
2018-11-27 09:45:43 +00:00
void _config_oscillators()
{
2019-09-09 13:56:37 +00:00
CLOCK(CLK_RST_CONTROLLER_SPARE_REG0) = (CLOCK(CLK_RST_CONTROLLER_SPARE_REG0) & 0xFFFFFFF3) | 4; // Set CLK_M_DIVISOR to 2.
SYSCTR0(SYSCTR0_CNTFID0) = 19200000; // Set counter frequency.
TMR(TIMERUS_USEC_CFG) = 0x45F; // For 19.2MHz clk_m.
CLOCK(CLK_RST_CONTROLLER_OSC_CTRL) = 0x50000071; // Set OSC to 38.4MHz and drive strength.
2019-09-09 13:56:37 +00:00
PMC(APBDEV_PMC_OSC_EDPD_OVER) = (PMC(APBDEV_PMC_OSC_EDPD_OVER) & 0xFFFFFF81) | 0xE; // Set LP0 OSC drive strength.
2019-09-09 13:56:37 +00:00
PMC(APBDEV_PMC_OSC_EDPD_OVER) = (PMC(APBDEV_PMC_OSC_EDPD_OVER) & 0xFFBFFFFF) | PMC_OSC_EDPD_OVER_OSC_CTRL_OVER;
PMC(APBDEV_PMC_CNTRL2) = (PMC(APBDEV_PMC_CNTRL2) & 0xFFFFEFFF) | PMC_CNTRL2_HOLD_CKE_LOW_EN;
PMC(APBDEV_PMC_SCRATCH188) = (PMC(APBDEV_PMC_SCRATCH188) & 0xFCFFFFFF) | (4 << 23); // LP0 EMC2TMC_CFG_XM2COMP_PU_VREF_SEL_RANGE.
CLOCK(CLK_RST_CONTROLLER_CLK_SYSTEM_RATE) = 0x10; // Set HCLK div to 2 and PCLK div to 1.
2019-09-09 13:56:37 +00:00
CLOCK(CLK_RST_CONTROLLER_PLLMB_BASE) &= 0xBFFFFFFF; // PLLMB disable.
2018-11-27 09:45:43 +00:00
PMC(APBDEV_PMC_TSC_MULT) = (PMC(APBDEV_PMC_TSC_MULT) & 0xFFFF0000) | 0x249F; //0x249F = 19200000 * (16 / 32.768 kHz)
2019-09-09 13:56:37 +00:00
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_SYS) = 0; // Set SCLK div to 1.
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) = 0x20004444; // Set clk source to Run and PLLP_OUT2 (204MHz).
2019-09-09 13:56:37 +00:00
CLOCK(CLK_RST_CONTROLLER_SUPER_SCLK_DIVIDER) = 0x80000000; // Enable SUPER_SDIV to 1.
CLOCK(CLK_RST_CONTROLLER_CLK_SYSTEM_RATE) = 2; // Set HCLK div to 1 and PCLK div to 3.
2018-11-27 09:45:43 +00:00
}
void _config_gpios()
{
PINMUX_AUX(PINMUX_AUX_UART2_TX) = 0;
PINMUX_AUX(PINMUX_AUX_UART3_TX) = 0;
// Set Joy-Con IsAttached direction.
PINMUX_AUX(PINMUX_AUX_GPIO_PE6) = PINMUX_INPUT_ENABLE | PINMUX_TRISTATE;
PINMUX_AUX(PINMUX_AUX_GPIO_PH6) = PINMUX_INPUT_ENABLE | PINMUX_TRISTATE;
2018-11-27 09:45:43 +00:00
// Set pin mode for Joy-Con IsAttached and UARTB/C TX pins.
2018-12-07 20:00:19 +00:00
#if !defined (DEBUG_UART_PORT) || DEBUG_UART_PORT != UART_B
2018-11-27 09:45:43 +00:00
gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_GPIO);
2018-12-07 20:00:19 +00:00
#endif
#if !defined (DEBUG_UART_PORT) || DEBUG_UART_PORT != UART_C
2018-11-27 09:45:43 +00:00
gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_GPIO);
2018-12-07 20:00:19 +00:00
#endif
// Set Joy-Con IsAttached mode.
2018-11-27 09:45:43 +00:00
gpio_config(GPIO_PORT_E, GPIO_PIN_6, GPIO_MODE_GPIO);
gpio_config(GPIO_PORT_H, GPIO_PIN_6, GPIO_MODE_GPIO);
// Enable input logic for Joy-Con IsAttached and UARTB/C TX pins.
2018-11-27 09:45:43 +00:00
gpio_output_enable(GPIO_PORT_G, GPIO_PIN_0, GPIO_OUTPUT_DISABLE);
gpio_output_enable(GPIO_PORT_D, GPIO_PIN_1, GPIO_OUTPUT_DISABLE);
gpio_output_enable(GPIO_PORT_E, GPIO_PIN_6, GPIO_OUTPUT_DISABLE);
gpio_output_enable(GPIO_PORT_H, GPIO_PIN_6, GPIO_OUTPUT_DISABLE);
pinmux_config_i2c(I2C_1);
pinmux_config_i2c(I2C_5);
pinmux_config_uart(UART_A);
// Configure volume up/down as inputs.
gpio_config(GPIO_PORT_X, GPIO_PIN_6, GPIO_MODE_GPIO);
gpio_config(GPIO_PORT_X, GPIO_PIN_7, GPIO_MODE_GPIO);
gpio_output_enable(GPIO_PORT_X, GPIO_PIN_6, GPIO_OUTPUT_DISABLE);
gpio_output_enable(GPIO_PORT_X, GPIO_PIN_7, GPIO_OUTPUT_DISABLE);
2019-09-09 13:56:37 +00:00
// Configure HOME as inputs.
// PINMUX_AUX(PINMUX_AUX_BUTTON_HOME) = PINMUX_INPUT_ENABLE | PINMUX_TRISTATE;
2019-09-09 13:56:37 +00:00
// gpio_config(GPIO_PORT_Y, GPIO_PIN_1, GPIO_MODE_GPIO);
2018-11-27 09:45:43 +00:00
}
void _config_pmc_scratch()
{
PMC(APBDEV_PMC_SCRATCH20) &= 0xFFF3FFFF; // Unset Debug console from Customer Option.
2019-09-09 13:56:37 +00:00
PMC(APBDEV_PMC_SCRATCH190) &= 0xFFFFFFFE; // Unset DATA_DQ_E_IVREF EMC_PMACRO_DATA_PAD_TX_CTRL
PMC(APBDEV_PMC_SECURE_SCRATCH21) |= PMC_FUSE_PRIVATEKEYDISABLE_TZ_STICKY_BIT;
2018-11-27 09:45:43 +00:00
}
void _mbist_workaround()
{
2020-07-17 13:50:17 +00:00
// Make sure Audio clocks are enabled before accessing I2S.
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) |= BIT(CLK_V_AHUB);
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_Y) |= BIT(CLK_Y_APE);
// Set mux output to SOR1 clock switch.
2018-11-27 09:45:43 +00:00
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_SOR1) = (CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_SOR1) | 0x8000) & 0xFFFFBFFF;
// Enabled PLLD and set csi to PLLD for test pattern generation.
2019-09-09 13:56:37 +00:00
CLOCK(CLK_RST_CONTROLLER_PLLD_BASE) |= 0x40800000;
2020-07-17 13:50:17 +00:00
// Clear per-clock resets for APE/VIC/HOST1X/DISP1.
CLOCK(CLK_RST_CONTROLLER_RST_DEV_Y_CLR) = BIT(CLK_Y_APE);
CLOCK(CLK_RST_CONTROLLER_RST_DEV_X_CLR) = BIT(CLK_X_VIC);
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
2018-11-27 09:45:43 +00:00
usleep(2);
// I2S channels to master and disable SLCG.
2018-11-27 09:45:43 +00:00
I2S(I2S1_CTRL) |= I2S_CTRL_MASTER_EN;
I2S(I2S1_CG) &= ~I2S_CG_SLCG_ENABLE;
I2S(I2S2_CTRL) |= I2S_CTRL_MASTER_EN;
I2S(I2S2_CG) &= ~I2S_CG_SLCG_ENABLE;
I2S(I2S3_CTRL) |= I2S_CTRL_MASTER_EN;
I2S(I2S3_CG) &= ~I2S_CG_SLCG_ENABLE;
I2S(I2S4_CTRL) |= I2S_CTRL_MASTER_EN;
I2S(I2S4_CG) &= ~I2S_CG_SLCG_ENABLE;
I2S(I2S5_CTRL) |= I2S_CTRL_MASTER_EN;
I2S(I2S5_CG) &= ~I2S_CG_SLCG_ENABLE;
2019-09-09 13:56:37 +00:00
DISPLAY_A(_DIREG(DC_COM_DSC_TOP_CTL)) |= 4; // DSC_SLCG_OVERRIDE.
2018-11-27 09:45:43 +00:00
VIC(0x8C) = 0xFFFFFFFF;
usleep(2);
2020-07-17 13:50:17 +00:00
// Set per-clock reset for APE/VIC/HOST1X/DISP1.
CLOCK(CLK_RST_CONTROLLER_RST_DEV_Y_SET) = BIT(CLK_Y_APE);
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_SET) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
CLOCK(CLK_RST_CONTROLLER_RST_DEV_X_SET) = BIT(CLK_X_VIC);
// Enable specific clocks and disable all others.
2020-07-17 13:50:17 +00:00
// CLK L Devices.
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_H) =
BIT(CLK_H_PMC) |
BIT(CLK_H_FUSE);
// CLK H Devices.
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) =
BIT(CLK_L_RTC) |
BIT(CLK_L_TMR) |
BIT(CLK_L_GPIO) |
BIT(CLK_L_BPMP_CACHE_CTRL);
// CLK U Devices.
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_U) =
BIT(CLK_U_CSITE) |
BIT(CLK_U_IRAMA) |
BIT(CLK_U_IRAMB) |
BIT(CLK_U_IRAMC) |
BIT(CLK_U_IRAMD) |
BIT(CLK_U_BPMP_CACHE_RAM);
// CLK V Devices.
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) =
BIT(CLK_V_MSELECT) |
BIT(CLK_V_APB2APE) |
BIT(CLK_V_SPDIF_DOUBLER) |
BIT(CLK_V_SE);
// CLK W Devices.
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_W) =
BIT(CLK_W_PCIERX0) |
BIT(CLK_W_PCIERX1) |
BIT(CLK_W_PCIERX2) |
BIT(CLK_W_PCIERX3) |
BIT(CLK_W_PCIERX4) |
BIT(CLK_W_PCIERX5) |
BIT(CLK_W_ENTROPY) |
BIT(CLK_W_MC1);
// CLK X Devices.
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_X) =
BIT(CLK_X_MC_CAPA) |
BIT(CLK_X_MC_CBPA) |
BIT(CLK_X_MC_CPU) |
BIT(CLK_X_MC_BBC) |
BIT(CLK_X_GPU) |
BIT(CLK_X_DBGAPB) |
BIT(CLK_X_PLLG_REF);
// CLK Y Devices.
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_Y) =
BIT(CLK_Y_MC_CDPA) |
BIT(CLK_Y_MC_CCPA);
// Disable clock gate overrides.
2018-11-27 09:45:43 +00:00
CLOCK(CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRA) = 0;
CLOCK(CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRB) = 0;
CLOCK(CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRC) = 0;
CLOCK(CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRD) = 0;
CLOCK(CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRE) = 0;
// Set child clock sources.
CLOCK(CLK_RST_CONTROLLER_PLLD_BASE) &= 0x1F7FFFFF; // Disable PLLD and set reference clock and csi clock.
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_SOR1) &= 0xFFFF3FFF; // Set SOR1 to automatic muxing of safe clock (24MHz) or SOR1 clk switch.
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_VI) = (CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_VI) & 0x1FFFFFFF) | 0x80000000; // Set clock source to PLLP_OUT.
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X) = (CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X) & 0x1FFFFFFF) | 0x80000000; // Set clock source to PLLP_OUT.
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_NVENC) = (CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_NVENC) & 0x1FFFFFFF) | 0x80000000; // Set clock source to PLLP_OUT.
2018-11-27 09:45:43 +00:00
}
void _config_se_brom()
{
// Enable fuse clock.
clock_enable_fuse(true);
// Skip SBK/SSK if sept was run.
if (!(b_cfg.boot_cfg & BOOT_CFG_SEPT_RUN))
{
// Bootrom part we skipped.
u32 sbk[4] = {
FUSE(FUSE_PRIVATE_KEY0),
FUSE(FUSE_PRIVATE_KEY1),
FUSE(FUSE_PRIVATE_KEY2),
FUSE(FUSE_PRIVATE_KEY3)
};
// Set SBK to slot 14.
se_aes_key_set(14, sbk, 0x10);
// Lock SBK from being read.
2020-06-15 11:58:50 +00:00
se_key_acc_ctrl(14, SE_KEY_TBL_DIS_KEYREAD_FLAG);
// Lock SSK (although it's not set and unused anyways).
2020-06-15 11:58:50 +00:00
se_key_acc_ctrl(15, SE_KEY_TBL_DIS_KEYREAD_FLAG);
}
2018-11-27 09:45:43 +00:00
// This memset needs to happen here, else TZRAM will behave weirdly later on.
memset((void *)TZRAM_BASE, 0, 0x10000);
PMC(APBDEV_PMC_CRYPTO_OP) = PMC_CRYPTO_OP_SE_ENABLE;
2018-11-27 09:45:43 +00:00
SE(SE_INT_STATUS_REG_OFFSET) = 0x1F;
// Clear the boot reason to avoid problems later
PMC(APBDEV_PMC_SCRATCH200) = 0x0;
PMC(APBDEV_PMC_RST_STATUS) = 0x0;
2018-11-28 19:26:16 +00:00
APB_MISC(APB_MISC_PP_STRAPPING_OPT_A) = (APB_MISC(APB_MISC_PP_STRAPPING_OPT_A) & 0xF0) | (7 << 10);
2018-11-27 09:45:43 +00:00
}
void _config_regulators()
2018-11-27 09:45:43 +00:00
{
// Disable low battery shutdown monitor.
max77620_low_battery_monitor_config(false);
// Disable SDMMC1 IO power.
gpio_output_enable(GPIO_PORT_E, GPIO_PIN_4, GPIO_OUTPUT_DISABLE);
max77620_regulator_enable(REGULATOR_LDO2, 0);
sd_power_cycle_time_start = get_tmr_ms();
2019-02-15 23:23:14 +00:00
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_CNFGBBC, MAX77620_CNFGBBC_RESISTOR_1K);
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_ONOFFCNFG1,
(1 << 6) | (3 << MAX77620_ONOFFCNFG1_MRT_SHIFT)); // PWR delay for forced shutdown off.
// Configure all Flexible Power Sequencers.
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG0,
(7 << MAX77620_FPS_TIME_PERIOD_SHIFT));
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG1,
(7 << MAX77620_FPS_TIME_PERIOD_SHIFT) | (1 << MAX77620_FPS_EN_SRC_SHIFT));
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_CFG2,
(7 << MAX77620_FPS_TIME_PERIOD_SHIFT));
2019-02-15 23:23:14 +00:00
max77620_regulator_config_fps(REGULATOR_LDO4);
max77620_regulator_config_fps(REGULATOR_LDO8);
max77620_regulator_config_fps(REGULATOR_SD0);
max77620_regulator_config_fps(REGULATOR_SD1);
max77620_regulator_config_fps(REGULATOR_SD3);
2018-11-27 09:45:43 +00:00
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_FPS_GPIO3,
(4 << MAX77620_FPS_TIME_PERIOD_SHIFT) | (2 << MAX77620_FPS_PD_PERIOD_SHIFT)); // 3.x+
2018-11-27 09:45:43 +00:00
// Set vdd_core voltage to 1.125V.
2019-02-15 23:23:14 +00:00
max77620_regulator_set_voltage(REGULATOR_SD0, 1125000);
2018-11-27 09:45:43 +00:00
// Fix CPU/GPU after a L4T warmboot.
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO5, 2);
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_GPIO6, 2);
2019-09-09 12:48:49 +00:00
i2c_send_byte(I2C_5, MAX77621_CPU_I2C_ADDR, MAX77621_VOUT_REG, MAX77621_VOUT_0_95V); // Disable power.
i2c_send_byte(I2C_5, MAX77621_CPU_I2C_ADDR, MAX77621_VOUT_DVS_REG, MAX77621_VOUT_ENABLE | MAX77621_VOUT_1_09V); // Enable DVS power.
i2c_send_byte(I2C_5, MAX77621_CPU_I2C_ADDR, MAX77621_CONTROL1_REG, MAX77621_RAMP_50mV_PER_US);
i2c_send_byte(I2C_5, MAX77621_CPU_I2C_ADDR, MAX77621_CONTROL2_REG,
MAX77621_T_JUNCTION_120 | MAX77621_FT_ENABLE | MAX77621_CKKADV_TRIP_75mV_PER_US_HIST_DIS |
MAX77621_CKKADV_TRIP_150mV_PER_US | MAX77621_INDUCTOR_NOMINAL);
2019-09-09 12:48:49 +00:00
i2c_send_byte(I2C_5, MAX77621_GPU_I2C_ADDR, MAX77621_VOUT_REG, MAX77621_VOUT_0_95V); // Disable power.
i2c_send_byte(I2C_5, MAX77621_GPU_I2C_ADDR, MAX77621_VOUT_DVS_REG, MAX77621_VOUT_ENABLE | MAX77621_VOUT_1_09V); // Enable DVS power.
i2c_send_byte(I2C_5, MAX77621_GPU_I2C_ADDR, MAX77621_CONTROL1_REG, MAX77621_RAMP_50mV_PER_US);
i2c_send_byte(I2C_5, MAX77621_GPU_I2C_ADDR, MAX77621_CONTROL2_REG,
MAX77621_T_JUNCTION_120 | MAX77621_FT_ENABLE | MAX77621_CKKADV_TRIP_75mV_PER_US_HIST_DIS |
MAX77621_CKKADV_TRIP_150mV_PER_US | MAX77621_INDUCTOR_NOMINAL);
}
void config_hw()
{
// Bootrom stuff we skipped by going through rcm.
_config_se_brom();
//FUSE(FUSE_PRIVATEKEYDISABLE) = 0x11;
SYSREG(AHB_AHB_SPARE_REG) &= 0xFFFFFF9F; // Unset APB2JTAG_OVERRIDE_EN and OBS_OVERRIDE_EN.
PMC(APBDEV_PMC_SCRATCH49) = PMC(APBDEV_PMC_SCRATCH49) & 0xFFFFFFFC;
_mbist_workaround();
clock_enable_se();
// Enable fuse clock.
clock_enable_fuse(true);
2019-12-04 19:31:39 +00:00
// Disable fuse programming.
fuse_disable_program();
mc_enable();
_config_oscillators();
APB_MISC(APB_MISC_PP_PINMUX_GLOBAL) = 0;
_config_gpios();
#ifdef DEBUG_UART_PORT
clock_enable_uart(DEBUG_UART_PORT);
uart_init(DEBUG_UART_PORT, 115200);
#endif
clock_enable_cl_dvfs();
clock_enable_i2c(I2C_1);
clock_enable_i2c(I2C_5);
clock_enable_tzram();
i2c_init(I2C_1);
i2c_init(I2C_5);
2020-06-13 23:04:50 +00:00
// Enable charger in case it's disabled.
bq24193_enable_charger();
_config_regulators();
2018-11-27 09:45:43 +00:00
_config_pmc_scratch(); // Missing from 4.x+
2019-09-09 13:56:37 +00:00
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) = 0x20003333; // Set SCLK to PLLP_OUT (408MHz).
2018-11-27 09:45:43 +00:00
sdram_init();
2019-06-30 00:55:19 +00:00
bpmp_mmu_enable();
// Clear flags from PMC_SCRATCH0
PMC(APBDEV_PMC_SCRATCH0) &= ~PMC_SCRATCH0_MODE_PAYLOAD;
2018-11-27 09:45:43 +00:00
}
void reconfig_hw_workaround(bool extra_reconfig, u32 magic)
{
// Disable BPMP max clock.
2019-06-30 00:55:19 +00:00
bpmp_clk_rate_set(BPMP_CLK_NORMAL);
#ifdef NYX
// Deinit touchscreen, 5V regulators and Joy-Con.
touch_power_off();
set_fan_duty(0);
jc_deinit();
regulator_disable_5v(REGULATOR_5V_ALL);
clock_disable_uart(UART_B);
clock_disable_uart(UART_C);
#endif
// Flush/disable MMU cache and set DRAM clock to 204MHz.
bpmp_mmu_disable();
2019-06-30 00:49:33 +00:00
minerva_change_freq(FREQ_204);
nyx_str->mtc_cfg.init_done = 0;
2019-06-30 00:49:33 +00:00
2018-11-27 09:45:43 +00:00
// Re-enable clocks to Audio Processing Engine as a workaround to hanging.
2020-07-17 13:50:17 +00:00
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_V) |= BIT(CLK_V_AHUB);
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_Y) |= BIT(CLK_Y_APE);
2018-11-27 09:45:43 +00:00
if (extra_reconfig)
{
msleep(10);
PMC(APBDEV_PMC_PWR_DET_VAL) |= PMC_PWR_DET_SDMMC1_IO_EN;
clock_disable_cl_dvfs();
// Disable Joy-con GPIOs.
gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_SPIO);
gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_SPIO);
gpio_config(GPIO_PORT_E, GPIO_PIN_6, GPIO_MODE_SPIO);
gpio_config(GPIO_PORT_H, GPIO_PIN_6, GPIO_MODE_SPIO);
}
// Power off display.
display_end();
// Enable clock to USBD and init SDMMC1 to avoid hangs with bad hw inits.
if (magic == 0xBAADF00D)
{
2020-07-17 13:50:17 +00:00
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = BIT(CLK_L_USBD);
2020-04-29 15:53:29 +00:00
sdmmc_init(&sd_sdmmc, SDMMC_1, SDMMC_POWER_3_3, SDMMC_BUS_WIDTH_1, SDHCI_TIMING_SD_ID, 0);
2018-11-27 09:45:43 +00:00
clock_disable_cl_dvfs();
msleep(200);
}
2018-12-07 20:00:19 +00:00
}