mirror of
https://github.com/CTCaer/hekate
synced 2024-12-22 03:11:16 +00:00
Add more register names + refactoring
This commit is contained in:
Kostas Missos
parent
c1e072986d
commit
718e502983
38 changed files with 330 additions and 201 deletions
|
|
@ -33,12 +33,12 @@ typedef struct _hekate_config
|
|||
char *tagline;
|
||||
// Global temporary config.
|
||||
bool se_keygen_done;
|
||||
u32 sbar_time_keeping;
|
||||
u32 errors;
|
||||
int sept_run;
|
||||
bool rcm_patched;
|
||||
u32 sd_timeoff;
|
||||
bool sept_run;
|
||||
bool emummc_force_disable;
|
||||
bool rcm_patched;
|
||||
u32 sbar_time_keeping;
|
||||
u32 sd_timeoff;
|
||||
u32 errors;
|
||||
} hekate_config;
|
||||
|
||||
typedef enum
|
||||
|
|
|
|||
|
|
@ -122,7 +122,7 @@ static void _se_lock(bool lock_se)
|
|||
}
|
||||
|
||||
memset((void *)IPATCH_BASE, 0, 14 * sizeof(u32));
|
||||
SB(SB_CSR) = 0x10; // Protected IROM enable.
|
||||
SB(SB_CSR) = SB_CSR_PIROM_DISABLE;
|
||||
|
||||
// This is useful for documenting the bits in the SE config registers, so we can keep it around.
|
||||
/*gfx_printf("SE(SE_SECURITY_0) = %08X\n", SE(SE_SECURITY_0));
|
||||
|
|
@ -167,7 +167,6 @@ void _pmc_scratch_lock(u32 kb)
|
|||
|
||||
void _sysctr0_reset()
|
||||
{
|
||||
SYSCTR0(SYSCTR0_CNTFID0) = 19200000;
|
||||
SYSCTR0(SYSCTR0_CNTCR) = 0;
|
||||
SYSCTR0(SYSCTR0_COUNTERID0) = 0;
|
||||
SYSCTR0(SYSCTR0_COUNTERID1) = 0;
|
||||
|
|
@ -185,7 +184,7 @@ void _sysctr0_reset()
|
|||
|
||||
int keygen(u8 *keyblob, u32 kb, tsec_ctxt_t *tsec_ctxt, launch_ctxt_t *hos_ctxt)
|
||||
{
|
||||
u8 tmp[0x30];
|
||||
u8 tmp[0x20];
|
||||
u32 retries = 0;
|
||||
|
||||
if (kb > KB_FIRMWARE_VERSION_MAX)
|
||||
|
|
@ -729,7 +728,7 @@ int hos_launch(ini_sec_t *cfg)
|
|||
else
|
||||
cluster_boot_cpu0(ctxt.pkg1_id->secmon_base);
|
||||
while (!secmon_mb->out)
|
||||
usleep(1); // This only works when in IRAM or with a trained DRAM.
|
||||
; // A usleep(1) only works when in IRAM or with a trained DRAM.
|
||||
|
||||
// Signal pkg2 ready and continue boot.
|
||||
secmon_mb->in = bootStatePkg2Continue;
|
||||
|
|
|
|||
|
|
@ -321,12 +321,12 @@ int launch_payload(char *path, bool update)
|
|||
reconfig_hw_workaround(true, 0);
|
||||
}
|
||||
|
||||
void (*ext_payload_ptr)() = (void *)EXT_PAYLOAD_ADDR;
|
||||
void (*update_ptr)() = (void *)RCM_PAYLOAD_ADDR;
|
||||
|
||||
// Some cards (Sandisk U1), do not like a fast power cycle. Wait min 100ms.
|
||||
sdmmc_storage_init_wait_sd();
|
||||
|
||||
void (*ext_payload_ptr)() = (void *)EXT_PAYLOAD_ADDR;
|
||||
void (*update_ptr)() = (void *)RCM_PAYLOAD_ADDR;
|
||||
|
||||
// Launch our payload.
|
||||
if (!update)
|
||||
(*ext_payload_ptr)();
|
||||
|
|
|
|||
|
|
@ -539,7 +539,7 @@ void sdram_init()
|
|||
const sdram_params_t *params = (const sdram_params_t *)sdram_get_params();
|
||||
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD_CFG2, 0x05);
|
||||
max77620_regulator_set_voltage(REGULATOR_SD1, 1100000);
|
||||
max77620_regulator_set_voltage(REGULATOR_SD1, 1100000); // Set DRAM voltage.
|
||||
|
||||
PMC(APBDEV_PMC_VDDP_SEL) = params->pmc_vddp_sel;
|
||||
usleep(params->pmc_vddp_sel_wait);
|
||||
|
|
|
|||
|
|
@ -130,7 +130,7 @@
|
|||
#define MAX77620_POWER_MODE_DISABLE 0
|
||||
#define MAX20024_LDO_CFG2_MPOK_MASK (1 << 2)
|
||||
#define MAX77620_LDO_CFG2_ADE_MASK (1 << 1)
|
||||
#define MAX77620_LDO_CFG2_ADE_DISABLE 0
|
||||
#define MAX77620_LDO_CFG2_ADE_DISABLE (0 << 1)
|
||||
#define MAX77620_LDO_CFG2_ADE_ENABLE (1 << 1)
|
||||
#define MAX77620_LDO_CFG2_SS_MASK (1 << 0)
|
||||
#define MAX77620_LDO_CFG2_SS_FAST (1 << 0)
|
||||
|
|
@ -153,6 +153,24 @@
|
|||
#define MAX77620_REG_PUE_GPIO 0x3E
|
||||
#define MAX77620_REG_PDE_GPIO 0x3F
|
||||
#define MAX77620_REG_AME_GPIO 0x40
|
||||
#define MAX77620_CNFG_GPIO_DRV_MASK (1 << 0)
|
||||
#define MAX77620_CNFG_GPIO_DRV_PUSHPULL (1 << 0)
|
||||
#define MAX77620_CNFG_GPIO_DRV_OPENDRAIN (0 << 0)
|
||||
#define MAX77620_CNFG_GPIO_DIR_MASK (1 << 1)
|
||||
#define MAX77620_CNFG_GPIO_DIR_INPUT (1 << 1)
|
||||
#define MAX77620_CNFG_GPIO_DIR_OUTPUT (0 << 1)
|
||||
#define MAX77620_CNFG_GPIO_INPUT_VAL_MASK (1 << 2)
|
||||
#define MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK (1 << 3)
|
||||
#define MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH (1 << 3)
|
||||
#define MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW (0 << 3)
|
||||
#define MAX77620_CNFG_GPIO_INT_MASK (0x3 << 4)
|
||||
#define MAX77620_CNFG_GPIO_INT_FALLING (1 << 4)
|
||||
#define MAX77620_CNFG_GPIO_INT_RISING (1 << 5)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_MASK (0x3 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_None (0x0 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_8ms (0x1 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_16ms (0x2 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_32ms (0x3 << 6)
|
||||
|
||||
#define MAX77620_REG_ONOFFCNFG1 0x41
|
||||
#define MAX77620_ONOFFCNFG1_SFT_RST (1 << 7)
|
||||
|
|
@ -259,25 +277,6 @@
|
|||
#define MAX77620_SD_CFG1_FSRADE_SD_DISABLE 0
|
||||
#define MAX77620_SD_CFG1_FSRADE_SD_ENABLE (1 << 0)
|
||||
|
||||
#define MAX77620_CNFG_GPIO_DRV_MASK (1 << 0)
|
||||
#define MAX77620_CNFG_GPIO_DRV_PUSHPULL (1 << 0)
|
||||
#define MAX77620_CNFG_GPIO_DRV_OPENDRAIN 0
|
||||
#define MAX77620_CNFG_GPIO_DIR_MASK (1 << 1)
|
||||
#define MAX77620_CNFG_GPIO_DIR_INPUT (1 << 1)
|
||||
#define MAX77620_CNFG_GPIO_DIR_OUTPUT 0
|
||||
#define MAX77620_CNFG_GPIO_INPUT_VAL_MASK (1 << 2)
|
||||
#define MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK (1 << 3)
|
||||
#define MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH (1 << 3)
|
||||
#define MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW 0
|
||||
#define MAX77620_CNFG_GPIO_INT_MASK (0x3 << 4)
|
||||
#define MAX77620_CNFG_GPIO_INT_FALLING (1 << 4)
|
||||
#define MAX77620_CNFG_GPIO_INT_RISING (1 << 5)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_MASK (0x3 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_None (0x0 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_8ms (0x1 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_16ms (0x2 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_32ms (0x3 << 6)
|
||||
|
||||
#define MAX77620_IRQ_LVL2_GPIO_EDGE0 (1 << 0)
|
||||
#define MAX77620_IRQ_LVL2_GPIO_EDGE1 (1 << 1)
|
||||
#define MAX77620_IRQ_LVL2_GPIO_EDGE2 (1 << 2)
|
||||
|
|
|
|||
|
|
@ -24,16 +24,16 @@
|
|||
* Switch Power domains (max77620):
|
||||
* Name | Usage | uV step | uV min | uV default | uV max | Init
|
||||
*-------+---------------+---------+--------+------------+---------+------------------
|
||||
* sd0 | core | 12500 | 600000 | 625000 | 1400000 | 1.125V (pkg1.1)
|
||||
* sd0 | SoC | 12500 | 600000 | 625000 | 1400000 | 1.125V (pkg1.1)
|
||||
* sd1 | SDRAM | 12500 | 600000 | 1125000 | 1125000 | 1.1V (pkg1.1)
|
||||
* sd2 | ldo{0-1, 7-8} | 12500 | 600000 | 1325000 | 1350000 | 1.325V (pcv)
|
||||
* sd3 | 1.8V general | 12500 | 600000 | 1800000 | 1800000 |
|
||||
* ldo0 | Display Panel | 25000 | 800000 | 1200000 | 1200000 | 1.2V (pkg1.1)
|
||||
* ldo1 | XUSB, PCIE | 25000 | 800000 | 1050000 | 1050000 | 1.05V (pcv)
|
||||
* ldo2 | SDMMC1 | 50000 | 800000 | 1800000 | 3300000 |
|
||||
* ldo3 | GC ASIC | 50000 | 800000 | 3100000 | 3100000 | 3.1V (pcv)
|
||||
* ldo3 | GC ASIC | 50000 | 800000 | 3100000 | 3100000 | 3.1V (pcv)
|
||||
* ldo4 | RTC | 12500 | 800000 | 850000 | 850000 |
|
||||
* ldo5 | GC ASIC | 50000 | 800000 | 1800000 | 1800000 | 1.8V (pcv)
|
||||
* ldo5 | GC ASIC | 50000 | 800000 | 1800000 | 1800000 | 1.8V (pcv)
|
||||
* ldo6 | Touch, ALS | 50000 | 800000 | 2900000 | 2900000 | 2.9V
|
||||
* ldo7 | XUSB | 50000 | 800000 | 1050000 | 1050000 |
|
||||
* ldo8 | XUSB, DC | 50000 | 800000 | 1050000 | 1050000 |
|
||||
|
|
|
|||
|
|
@ -179,39 +179,36 @@ void bpmp_clk_rate_set(bpmp_freq_t fid)
|
|||
if (bpmp_clock_set)
|
||||
{
|
||||
// Restore to PLLP source during PLLC4 configuration.
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) =
|
||||
(CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) & 0xFFFF8888) | 0x3333; // PLLP_OUT.
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) = 0x20003333; // PLLP_OUT.
|
||||
// Wait a bit for clock source change.
|
||||
msleep(10);
|
||||
}
|
||||
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_MISC) = (1 << 30);
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_BASE) = 4 | (pllc4_divn[fid] << 8) | (1 << 30); // DIVM: 4, DIVP: 1.
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_MISC) = PLLC4_MISC_EN_LCKDET;
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_BASE) = 4 | (pllc4_divn[fid] << 8) | PLL_BASE_ENABLE; // DIVM: 4, DIVP: 1.
|
||||
|
||||
while (!(CLOCK(CLK_RST_CONTROLLER_PLLC4_BASE) & (1 << 27)))
|
||||
while (!(CLOCK(CLK_RST_CONTROLLER_PLLC4_BASE) & PLLC4_BASE_LOCK))
|
||||
;
|
||||
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_OUT) = (1 << 8) | (1 << 1); // 1.5 div.
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_OUT) |= 1; // Get divider out of reset.
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_OUT) = (1 << 8) | PLLC4_OUT3_CLKEN; // 1.5 div.
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_OUT) |= PLLC4_OUT3_RSTN_CLR; // Get divider out of reset.
|
||||
|
||||
// Wait a bit for PLLC4 to stabilize.
|
||||
msleep(10);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_SYSTEM_RATE) = 3; // PCLK = HCLK / 4.
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) =
|
||||
(CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) & 0xFFFF8888) | 0x3323; // PLLC4_OUT3.
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) = 0x20003323; // PLLC4_OUT3.
|
||||
|
||||
bpmp_clock_set = fid;
|
||||
}
|
||||
else
|
||||
{
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) =
|
||||
(CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) & 0xFFFF8888) | 0x3333; // PLLP_OUT.
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) = 0x20003333; // PLLP_OUT.
|
||||
|
||||
// Wait a bit for clock source change.
|
||||
msleep(10);
|
||||
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_SYSTEM_RATE) = 2; // PCLK = HCLK / 3.
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_BASE) &= ~(1<<30);
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_BASE) &= ~PLL_BASE_ENABLE;
|
||||
bpmp_clock_set = BPMP_CLK_NORMAL;
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -22,58 +22,58 @@
|
|||
/* clock_t: reset, enable, source, index, clk_src, clk_div */
|
||||
|
||||
static const clock_t _clock_uart[] = {
|
||||
/* UART A */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_UARTA, 6, 0, 0 },
|
||||
/* UART B */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_UARTB, 7, 0, 0 },
|
||||
/* UART C */ { CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_CONTROLLER_CLK_SOURCE_UARTC, 0x17, 0, 0 },
|
||||
/* UART D */ { 0 },
|
||||
/* UART E */ { 0 }
|
||||
/* UART A */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_UARTA, 6, 0, 2 },
|
||||
/* UART B */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_UARTB, 7, 0, 2 },
|
||||
/* UART C */ { CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_CONTROLLER_CLK_SOURCE_UARTC, 23, 0, 2 },
|
||||
/* UART D */ { CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_UARTD, 1, 0, 2 },
|
||||
/* UART E */ { CLK_RST_CONTROLLER_RST_DEVICES_Y, CLK_RST_CONTROLLER_CLK_OUT_ENB_Y, CLK_RST_CONTROLLER_CLK_SOURCE_UARTAPE, 20, 0, 2 }
|
||||
};
|
||||
|
||||
static const clock_t _clock_i2c[] = {
|
||||
/* I2C1 */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_I2C1, 0xC, 6, 0 }, // 0, 19 }, // 100KHz
|
||||
/* I2C1 */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_I2C1, 12, 6, 0 }, // 0, 19 }, // 100KHz
|
||||
/* I2C2 */ { 0 },
|
||||
/* I2C3 */ { 0 },
|
||||
/* I2C4 */ { 0 },
|
||||
/* I2C5 */ { CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_CONTROLLER_CLK_SOURCE_I2C5, 0xF, 6, 0 }, // 0, 4 }, // 400KHz
|
||||
/* I2C5 */ { CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_CONTROLLER_CLK_SOURCE_I2C5, 15, 6, 0 }, // 0, 4 }, // 400KHz
|
||||
/* I2C6 */ { 0 }
|
||||
};
|
||||
|
||||
static clock_t _clock_se = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_RST_CONTROLLER_CLK_SOURCE_SE, 0x1F, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_RST_CONTROLLER_CLK_SOURCE_SE, 31, 0, 0
|
||||
};
|
||||
|
||||
static clock_t _clock_tzram = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_NO_SOURCE, 0x1E, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_NO_SOURCE, 30, 0, 0
|
||||
};
|
||||
|
||||
static clock_t _clock_host1x = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X, 0x1C, 4, 3
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X, 28, 4, 3
|
||||
};
|
||||
static clock_t _clock_tsec = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_TSEC, 0x13, 0, 2
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_TSEC, 19, 0, 2
|
||||
};
|
||||
static clock_t _clock_sor_safe = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_Y, CLK_RST_CONTROLLER_CLK_OUT_ENB_Y, CLK_NO_SOURCE, 0x1E, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_Y, CLK_RST_CONTROLLER_CLK_OUT_ENB_Y, CLK_NO_SOURCE, 30, 0, 0
|
||||
};
|
||||
static clock_t _clock_sor0 = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_NO_SOURCE, 0x16, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_NO_SOURCE, 22, 0, 0
|
||||
};
|
||||
static clock_t _clock_sor1 = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_RST_CONTROLLER_CLK_SOURCE_SOR1, 0x17, 0, 2
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_RST_CONTROLLER_CLK_SOURCE_SOR1, 23, 0, 2
|
||||
};
|
||||
static clock_t _clock_kfuse = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_NO_SOURCE, 8, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_NO_SOURCE, 8, 0, 0
|
||||
};
|
||||
|
||||
static clock_t _clock_cl_dvfs = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_W, CLK_RST_CONTROLLER_CLK_OUT_ENB_W, CLK_NO_SOURCE, 0x1B, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_W, CLK_RST_CONTROLLER_CLK_OUT_ENB_W, CLK_NO_SOURCE, 27, 0, 0
|
||||
};
|
||||
static clock_t _clock_coresight = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_CSITE, 9, 0, 4
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_CSITE, 9, 0, 4
|
||||
};
|
||||
|
||||
static clock_t _clock_pwm = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_PWM, 0x11, 6, 4
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_PWM, 17, 6, 4 // Freference: 6.2MHz.
|
||||
};
|
||||
|
||||
void clock_enable(const clock_t *clk)
|
||||
|
|
@ -372,43 +372,44 @@ static int _clock_sdmmc_config_clock_source_inner(u32 *pout, u32 id, u32 val)
|
|||
u32 divisor = 0;
|
||||
u32 source = PLLP_OUT0;
|
||||
|
||||
// Get IO clock divisor.
|
||||
switch (val)
|
||||
{
|
||||
case 25000:
|
||||
*pout = 24728;
|
||||
divisor = 31;
|
||||
divisor = 31; // 16.5 div.
|
||||
break;
|
||||
case 26000:
|
||||
*pout = 25500;
|
||||
divisor = 30;
|
||||
divisor = 30; // 16 div.
|
||||
break;
|
||||
case 40800:
|
||||
*pout = 40800;
|
||||
divisor = 18;
|
||||
divisor = 18; // 10 div.
|
||||
break;
|
||||
case 50000:
|
||||
*pout = 48000;
|
||||
divisor = 15;
|
||||
divisor = 15; // 8.5 div.
|
||||
break;
|
||||
case 52000:
|
||||
*pout = 51000;
|
||||
divisor = 14;
|
||||
divisor = 14; // 8 div.
|
||||
break;
|
||||
case 100000:
|
||||
*pout = 90667;
|
||||
divisor = 7;
|
||||
divisor = 7; // 4.5 div.
|
||||
break;
|
||||
case 200000:
|
||||
*pout = 163200;
|
||||
divisor = 3;
|
||||
divisor = 3; // 2.5 div.
|
||||
break;
|
||||
case 208000:
|
||||
*pout = 204000;
|
||||
divisor = 2;
|
||||
divisor = 2; // 2 div.
|
||||
break;
|
||||
default:
|
||||
*pout = 24728;
|
||||
divisor = 31;
|
||||
divisor = 31; // 16.5 div.
|
||||
}
|
||||
|
||||
_clock_sdmmc_table[2 * id] = val;
|
||||
|
|
|
|||
|
|
@ -41,6 +41,8 @@
|
|||
#define CLK_RST_CONTROLLER_PLLM_MISC2 0x9C
|
||||
#define CLK_RST_CONTROLLER_PLLP_BASE 0xA0
|
||||
#define CLK_RST_CONTROLLER_PLLD_BASE 0xD0
|
||||
#define CLK_RST_CONTROLLER_PLLD_MISC1 0xD8
|
||||
#define CLK_RST_CONTROLLER_PLLD_MISC 0xDC
|
||||
#define CLK_RST_CONTROLLER_PLLX_BASE 0xE0
|
||||
#define CLK_RST_CONTROLLER_PLLX_MISC 0xE4
|
||||
#define CLK_RST_CONTROLLER_PLLE_BASE 0xE8
|
||||
|
|
@ -50,6 +52,7 @@
|
|||
#define CLK_RST_CONTROLLER_CLK_SOURCE_PWM 0x110
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_I2C1 0x124
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_I2C5 0x128
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_DISP1 0x138
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_VI 0x148
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC1 0x150
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC2 0x154
|
||||
|
|
@ -57,11 +60,13 @@
|
|||
#define CLK_RST_CONTROLLER_CLK_SOURCE_UARTA 0x178
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_UARTB 0x17C
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X 0x180
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_I2C2 0x198
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_EMC 0x19C
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_UARTC 0x1A0
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_I2C3 0x1B8
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC3 0x1BC
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_UARTD 0x1C0
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_CSITE 0x1D4
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_EMC 0x19C
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_TSEC 0x1F4
|
||||
#define CLK_RST_CONTROLLER_CLK_OUT_ENB_X 0x280
|
||||
#define CLK_RST_CONTROLLER_CLK_ENB_X_SET 0x284
|
||||
|
|
@ -95,9 +100,12 @@
|
|||
#define CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRC 0x3A0
|
||||
#define CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRD 0x3A4
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_MSELECT 0x3B4
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_I2C4 0x3C4
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SYS 0x400
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SOR1 0x410
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SE 0x42C
|
||||
#define CLK_RST_CONTROLLER_CLK_ENB_V_SET 0x440
|
||||
#define CLK_RST_CONTROLLER_CLK_ENB_V_CLR 0x444
|
||||
#define CLK_RST_CONTROLLER_CLK_ENB_W_SET 0x448
|
||||
#define CLK_RST_CONTROLLER_CLK_ENB_W_CLR 0x44C
|
||||
#define CLK_RST_CONTROLLER_RST_CPUG_CMPLX_SET 0x450
|
||||
|
|
@ -113,14 +121,25 @@
|
|||
#define CLK_RST_CONTROLLER_PLLC4_OUT 0x5E4
|
||||
#define CLK_RST_CONTROLLER_PLLMB_BASE 0x5E8
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_DSIA_LP 0x620
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_I2C6 0x65C
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_EMC_DLL 0x664
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_UART_FST_MIP_CAL 0x66C
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC_LEGACY_TM 0x694
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_NVENC 0x6A0
|
||||
#define CLK_RST_CONTROLLER_SE_SUPER_CLK_DIVIDER 0x704
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_UARTAPE 0x710
|
||||
|
||||
#define CLK_NO_SOURCE 0x0
|
||||
|
||||
/*! PLL control and status bits */
|
||||
#define PLL_BASE_ENABLE (1 << 30)
|
||||
|
||||
#define PLLC4_MISC_EN_LCKDET (1 << 30)
|
||||
#define PLLC4_BASE_LOCK (1 << 27)
|
||||
#define PLLC4_BASE_IDDQ (1 << 18)
|
||||
#define PLLC4_OUT3_CLKEN (1 << 1)
|
||||
#define PLLC4_OUT3_RSTN_CLR (1 << 0)
|
||||
|
||||
/*! Generic clock descriptor. */
|
||||
typedef struct _clock_t
|
||||
{
|
||||
|
|
|
|||
|
|
@ -117,10 +117,10 @@ void cluster_boot_cpu0(u32 entry)
|
|||
EXCP_VEC(EVP_CPU_RESET_VECTOR) = 0;
|
||||
|
||||
// Set reset vector.
|
||||
SB(SB_AA64_RESET_LOW) = entry | 1;
|
||||
SB(SB_AA64_RESET_LOW) = entry | SB_AA64_RST_AARCH64_MODE_EN;
|
||||
SB(SB_AA64_RESET_HIGH) = 0;
|
||||
// Non-secure reset vector write disable.
|
||||
SB(SB_CSR) = 2;
|
||||
SB(SB_CSR) = SB_CSR_NS_RST_VEC_WR_DIS;
|
||||
(void)SB(SB_CSR);
|
||||
|
||||
// Clear MSELECT reset.
|
||||
|
|
|
|||
|
|
@ -41,22 +41,36 @@
|
|||
extern sdmmc_t sd_sdmmc;
|
||||
extern boot_cfg_t b_cfg;
|
||||
|
||||
/*
|
||||
* CLK_OSC - 38.4 MHz crystal.
|
||||
* CLK_M - 19.2 MHz (osc/2).
|
||||
* CLK_S - 32.768 KHz (from PMIC).
|
||||
* SCLK - 204MHz init (-> 408MHz -> OC).
|
||||
* HCLK - 204MHz init (-> 408MHz -> OC).
|
||||
* PCLK - 68MHz init (-> 136MHz -> OC/4).
|
||||
*/
|
||||
|
||||
void _config_oscillators()
|
||||
{
|
||||
CLOCK(CLK_RST_CONTROLLER_SPARE_REG0) = (CLOCK(CLK_RST_CONTROLLER_SPARE_REG0) & 0xFFFFFFF3) | 4;
|
||||
SYSCTR0(SYSCTR0_CNTFID0) = 19200000;
|
||||
CLOCK(CLK_RST_CONTROLLER_SPARE_REG0) = (CLOCK(CLK_RST_CONTROLLER_SPARE_REG0) & 0xFFFFFFF3) | 4; // Set CLK_M_DIVISOR to 2.
|
||||
SYSCTR0(SYSCTR0_CNTFID0) = 19200000; // Set counter frequency.
|
||||
TMR(TIMERUS_USEC_CFG) = 0x45F; // For 19.2MHz clk_m.
|
||||
CLOCK(CLK_RST_CONTROLLER_OSC_CTRL) = 0x50000071;
|
||||
PMC(APBDEV_PMC_OSC_EDPD_OVER) = (PMC(APBDEV_PMC_OSC_EDPD_OVER) & 0xFFFFFF81) | 0xE;
|
||||
PMC(APBDEV_PMC_OSC_EDPD_OVER) = (PMC(APBDEV_PMC_OSC_EDPD_OVER) & 0xFFBFFFFF) | 0x400000;
|
||||
PMC(APBDEV_PMC_CNTRL2) = (PMC(APBDEV_PMC_CNTRL2) & 0xFFFFEFFF) | 0x1000;
|
||||
PMC(APBDEV_PMC_SCRATCH188) = (PMC(APBDEV_PMC_SCRATCH188) & 0xFCFFFFFF) | 0x2000000;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_SYSTEM_RATE) = 0x10;
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLMB_BASE) &= 0xBFFFFFFF;
|
||||
CLOCK(CLK_RST_CONTROLLER_OSC_CTRL) = 0x50000071; // Set OSC to 38.4MHz and drive strength.
|
||||
|
||||
PMC(APBDEV_PMC_OSC_EDPD_OVER) = (PMC(APBDEV_PMC_OSC_EDPD_OVER) & 0xFFFFFF81) | 0xE; // Set LP0 OSC drive strength.
|
||||
PMC(APBDEV_PMC_OSC_EDPD_OVER) = (PMC(APBDEV_PMC_OSC_EDPD_OVER) & 0xFFBFFFFF) | PMC_OSC_EDPD_OVER_OSC_CTRL_OVER;
|
||||
PMC(APBDEV_PMC_CNTRL2) = (PMC(APBDEV_PMC_CNTRL2) & 0xFFFFEFFF) | PMC_CNTRL2_HOLD_CKE_LOW_EN;
|
||||
PMC(APBDEV_PMC_SCRATCH188) = (PMC(APBDEV_PMC_SCRATCH188) & 0xFCFFFFFF) | (4 << 23); // LP0 EMC2TMC_CFG_XM2COMP_PU_VREF_SEL_RANGE.
|
||||
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_SYSTEM_RATE) = 0x10; // Set HCLK div to 2 and PCLK div to 1.
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLMB_BASE) &= 0xBFFFFFFF; // PLLMB disable.
|
||||
|
||||
PMC(APBDEV_PMC_TSC_MULT) = (PMC(APBDEV_PMC_TSC_MULT) & 0xFFFF0000) | 0x249F; //0x249F = 19200000 * (16 / 32.768 kHz)
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) = 0x20004444;
|
||||
CLOCK(CLK_RST_CONTROLLER_SUPER_SCLK_DIVIDER) = 0x80000000;
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_SYSTEM_RATE) = 2;
|
||||
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_SYS) = 0; // Set SCLK div to 1.
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) = 0x20004444; // Set clk source to Run and PLLP_OUT2 (204MHz).
|
||||
CLOCK(CLK_RST_CONTROLLER_SUPER_SCLK_DIVIDER) = 0x80000000; // Enable SUPER_SDIV to 1.
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_SYSTEM_RATE) = 2; // Set HCLK div to 1 and PCLK div to 3.
|
||||
}
|
||||
|
||||
void _config_gpios()
|
||||
|
|
@ -89,13 +103,17 @@ void _config_gpios()
|
|||
gpio_config(GPIO_PORT_X, GPIO_PIN_7, GPIO_MODE_GPIO);
|
||||
gpio_output_enable(GPIO_PORT_X, GPIO_PIN_6, GPIO_OUTPUT_DISABLE);
|
||||
gpio_output_enable(GPIO_PORT_X, GPIO_PIN_7, GPIO_OUTPUT_DISABLE);
|
||||
|
||||
// Configure HOME as inputs.
|
||||
// PINMUX_AUX(PINMUX_AUX_BUTTON_HOME) = PINMUX_PULL_UP | PINMUX_INPUT_ENABLE;
|
||||
// gpio_config(GPIO_PORT_Y, GPIO_PIN_1, GPIO_MODE_GPIO);
|
||||
}
|
||||
|
||||
void _config_pmc_scratch()
|
||||
{
|
||||
PMC(APBDEV_PMC_SCRATCH20) &= 0xFFF3FFFF;
|
||||
PMC(APBDEV_PMC_SCRATCH190) &= 0xFFFFFFFE;
|
||||
PMC(APBDEV_PMC_SECURE_SCRATCH21) |= 0x10;
|
||||
PMC(APBDEV_PMC_SCRATCH20) &= 0xFFF3FFFF; // Unset Debug console from Customer Option.
|
||||
PMC(APBDEV_PMC_SCRATCH190) &= 0xFFFFFFFE; // Unset DATA_DQ_E_IVREF EMC_PMACRO_DATA_PAD_TX_CTRL
|
||||
PMC(APBDEV_PMC_SECURE_SCRATCH21) |= PMC_FUSE_PRIVATEKEYDISABLE_TZ_STICKY_BIT;
|
||||
}
|
||||
|
||||
void _mbist_workaround()
|
||||
|
|
@ -104,7 +122,7 @@ void _mbist_workaround()
|
|||
CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_Y) |= (1 << 6); // Enable APE clock.
|
||||
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_SOR1) = (CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_SOR1) | 0x8000) & 0xFFFFBFFF;
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLD_BASE) |= 0x40800000u;
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLD_BASE) |= 0x40800000;
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_Y_CLR) = 0x40;
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_X_CLR) = 0x40000;
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = 0x18000000;
|
||||
|
|
@ -120,7 +138,7 @@ void _mbist_workaround()
|
|||
I2S(I2S4_CG) &= ~I2S_CG_SLCG_ENABLE;
|
||||
I2S(I2S5_CTRL) |= I2S_CTRL_MASTER_EN;
|
||||
I2S(I2S5_CG) &= ~I2S_CG_SLCG_ENABLE;
|
||||
DISPLAY_A(_DIREG(DC_COM_DSC_TOP_CTL)) |= 4;
|
||||
DISPLAY_A(_DIREG(DC_COM_DSC_TOP_CTL)) |= 4; // DSC_SLCG_OVERRIDE.
|
||||
VIC(0x8C) = 0xFFFFFFFF;
|
||||
usleep(2);
|
||||
|
||||
|
|
@ -184,8 +202,8 @@ void config_hw()
|
|||
// Bootrom stuff we skipped by going through rcm.
|
||||
_config_se_brom();
|
||||
//FUSE(FUSE_PRIVATEKEYDISABLE) = 0x11;
|
||||
SYSREG(AHB_AHB_SPARE_REG) &= 0xFFFFFF9F;
|
||||
PMC(APBDEV_PMC_SCRATCH49) = ((PMC(APBDEV_PMC_SCRATCH49) >> 1) << 1) & 0xFFFFFFFD;
|
||||
SYSREG(AHB_AHB_SPARE_REG) &= 0xFFFFFF9F; // Unset APB2JTAG_OVERRIDE_EN and OBS_OVERRIDE_EN.
|
||||
PMC(APBDEV_PMC_SCRATCH49) = PMC(APBDEV_PMC_SCRATCH49) & 0xFFFFFFFC;
|
||||
|
||||
_mbist_workaround();
|
||||
clock_enable_se();
|
||||
|
|
@ -258,7 +276,7 @@ void config_hw()
|
|||
|
||||
_config_pmc_scratch(); // Missing from 4.x+
|
||||
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) = (CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) & 0xFFFF8888) | 0x3333;
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) = 0x20003333; // Set SCLK to PLLP_OUT (408MHz).
|
||||
|
||||
sdram_init();
|
||||
|
||||
|
|
|
|||
|
|
@ -40,19 +40,32 @@
|
|||
#define PINMUX_AUX_SDMMC3_DAT3 0x30
|
||||
#define PINMUX_AUX_SATA_LED_ACTIVE 0x4C
|
||||
#define PINMUX_AUX_DMIC3_CLK 0xB4
|
||||
#define PINMUX_AUX_DMIC3_DAT 0xB8
|
||||
#define PINMUX_AUX_CAM_I2C_SCL 0xD4
|
||||
#define PINMUX_AUX_CAM_I2C_SDA 0xD8
|
||||
#define PINMUX_AUX_UART2_TX 0xF4
|
||||
#define PINMUX_AUX_UART3_TX 0x104
|
||||
#define PINMUX_AUX_DAP4_DIN 0x148
|
||||
#define PINMUX_AUX_DAP4_SCLK 0x150
|
||||
#define PINMUX_AUX_GPIO_X1_AUD 0x18C
|
||||
#define PINMUX_AUX_GPIO_X3_AUD 0x190
|
||||
#define PINMUX_AUX_SPDIF_IN 0x1A4
|
||||
#define PINMUX_AUX_USB_VBUS_EN0 0x1A8
|
||||
#define PINMUX_AUX_USB_VBUS_EN1 0x1AC
|
||||
#define PINMUX_AUX_WIFI_EN 0x1B4
|
||||
#define PINMUX_AUX_WIFI_RST 0x1B8
|
||||
#define PINMUX_AUX_AP_WAKE_NFC 0x1CC
|
||||
#define PINMUX_AUX_NFC_EN 0x1D0
|
||||
#define PINMUX_AUX_NFC_INT 0x1D4
|
||||
#define PINMUX_AUX_CAM1_PWDN 0x1EC
|
||||
#define PINMUX_AUX_CAM2_PWDN 0x1F0
|
||||
#define PINMUX_AUX_LCD_BL_PWM 0x1FC
|
||||
#define PINMUX_AUX_LCD_BL_EN 0x200
|
||||
#define PINMUX_AUX_LCD_RST 0x204
|
||||
#define PINMUX_AUX_LCD_GPIO2 0x20C
|
||||
#define PINMUX_AUX_TOUCH_INT 0x220
|
||||
#define PINMUX_AUX_MOTION_INT 0x224
|
||||
#define PINMUX_AUX_BUTTON_HOME 0x240
|
||||
#define PINMUX_AUX_GPIO_PE6 0x248
|
||||
#define PINMUX_AUX_GPIO_PH6 0x250
|
||||
#define PINMUX_AUX_GPIO_PK3 0x260
|
||||
|
|
|
|||
|
|
@ -25,6 +25,7 @@
|
|||
#define APBDEV_PMC_PWRGATE_TOGGLE 0x30
|
||||
#define APBDEV_PMC_PWRGATE_STATUS 0x38
|
||||
#define APBDEV_PMC_NO_IOPOWER 0x44
|
||||
#define PMC_NO_IOPOWER_SDMMC1_IO_EN (1 << 12)
|
||||
#define APBDEV_PMC_SCRATCH0 0x50
|
||||
#define APBDEV_PMC_SCRATCH1 0x54
|
||||
#define APBDEV_PMC_SCRATCH20 0xA0
|
||||
|
|
@ -37,6 +38,7 @@
|
|||
#define APBDEV_PMC_SCRATCH33 0x120
|
||||
#define APBDEV_PMC_SCRATCH40 0x13C
|
||||
#define APBDEV_PMC_OSC_EDPD_OVER 0x1A4
|
||||
#define PMC_OSC_EDPD_OVER_OSC_CTRL_OVER 0x400000
|
||||
#define APBDEV_PMC_RST_STATUS 0x1B4
|
||||
#define APBDEV_PMC_IO_DPD_REQ 0x1B8
|
||||
#define APBDEV_PMC_IO_DPD2_REQ 0x1C0
|
||||
|
|
@ -51,9 +53,11 @@
|
|||
#define APBDEV_PMC_REG_SHORT 0x2CC
|
||||
#define APBDEV_PMC_SEC_DISABLE3 0x2D8
|
||||
#define APBDEV_PMC_SECURE_SCRATCH21 0x334
|
||||
#define PMC_FUSE_PRIVATEKEYDISABLE_TZ_STICKY_BIT 0x10
|
||||
#define APBDEV_PMC_SECURE_SCRATCH32 0x360
|
||||
#define APBDEV_PMC_SECURE_SCRATCH49 0x3A4
|
||||
#define APBDEV_PMC_CNTRL2 0x440
|
||||
#define PMC_CNTRL2_HOLD_CKE_LOW_EN 0x1000
|
||||
#define APBDEV_PMC_IO_DPD3_REQ 0x45C
|
||||
#define APBDEV_PMC_IO_DPD4_REQ 0x464
|
||||
#define APBDEV_PMC_UTMIP_PAD_CFG1 0x4C4
|
||||
|
|
|
|||
|
|
@ -107,9 +107,11 @@
|
|||
/*! Misc registers. */
|
||||
#define APB_MISC_PP_STRAPPING_OPT_A 0x08
|
||||
#define APB_MISC_PP_PINMUX_GLOBAL 0x40
|
||||
#define APB_MISC_GP_HIDREV 0x804
|
||||
#define APB_MISC_GP_LCD_BL_PWM_CFGPADCTRL 0xA34
|
||||
#define APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL 0xA98
|
||||
#define APB_MISC_GP_EMMC4_PAD_CFGPADCTRL 0xAB4
|
||||
#define APB_MISC_GP_EMMC4_PAD_PUPD_CFGPADCTRL 0xABC
|
||||
#define APB_MISC_GP_WIFI_EN_CFGPADCTRL 0xB64
|
||||
#define APB_MISC_GP_WIFI_RST_CFGPADCTRL 0xB68
|
||||
|
||||
|
|
@ -119,7 +121,10 @@
|
|||
|
||||
/*! Secure boot registers. */
|
||||
#define SB_CSR 0x0
|
||||
#define SB_CSR_NS_RST_VEC_WR_DIS (1 << 1)
|
||||
#define SB_CSR_PIROM_DISABLE (1 << 4)
|
||||
#define SB_AA64_RESET_LOW 0x30
|
||||
#define SB_AA64_RST_AARCH64_MODE_EN (1 << 0)
|
||||
#define SB_AA64_RESET_HIGH 0x34
|
||||
|
||||
/*! SOR registers. */
|
||||
|
|
@ -183,6 +188,7 @@
|
|||
/*! PWM registers. */
|
||||
#define PWM_CONTROLLER_PWM_CSR_0 0x00
|
||||
#define PWM_CONTROLLER_PWM_CSR_1 0x10
|
||||
#define PWM_CSR_EN (1 << 31)
|
||||
|
||||
/*! Special registers. */
|
||||
#define EMC_SCRATCH0 0x324
|
||||
|
|
|
|||
|
|
@ -22,9 +22,8 @@
|
|||
#define UART_A 0
|
||||
#define UART_B 1
|
||||
#define UART_C 2
|
||||
//TODO: define clock inits for those.
|
||||
/*#define UART_D 3
|
||||
#define UART_E 4*/
|
||||
#define UART_D 3
|
||||
#define UART_E 4
|
||||
|
||||
#define BAUD_115200 115200
|
||||
|
||||
|
|
@ -34,15 +33,29 @@
|
|||
#define UART_TX_FIFO_FULL 0x100
|
||||
#define UART_RX_FIFO_EMPTY 0x200
|
||||
|
||||
#define UART_INVERT_RXD 0x01
|
||||
#define UART_INVERT_TXD 0x02
|
||||
#define UART_INVERT_CTS 0x04
|
||||
#define UART_INVERT_RTS 0x08
|
||||
|
||||
#define UART_IER_DLAB_IE_EORD 0x20
|
||||
|
||||
#define UART_LCR_DLAB 0x80
|
||||
#define UART_LCR_STOP 0x4
|
||||
#define UART_LCR_WORD_LENGTH_8 0x3
|
||||
|
||||
#define UART_LSR_RDR 0x1
|
||||
#define UART_LSR_THRE 0x20
|
||||
#define UART_LSR_TMTY 0x40
|
||||
#define UART_LSR_FIFOE 0x80
|
||||
|
||||
#define UART_IIR_FCR_TX_CLR 0x4
|
||||
#define UART_IIR_FCR_RX_CLR 0x2
|
||||
#define UART_IIR_FCR_EN_FIFO 0x1
|
||||
|
||||
#define UART_MCR_RTS 0x2
|
||||
#define UART_MCR_DTR 0x1
|
||||
|
||||
typedef struct _uart_t
|
||||
{
|
||||
/* 0x00 */ vu32 UART_THR_DLAB;
|
||||
|
|
|
|||
|
|
@ -35,7 +35,7 @@ typedef enum {
|
|||
|
||||
typedef struct _emummc_cfg_t
|
||||
{
|
||||
int enabled;
|
||||
int enabled;
|
||||
u64 sector;
|
||||
u16 id;
|
||||
char *path;
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@
|
|||
#define MMC_ALL_SEND_CID 2 /* bcr R2 */
|
||||
#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
|
||||
#define MMC_SET_DSR 4 /* bc [31:16] RCA */
|
||||
#define MMC_SLEEP_AWAKE 5 /* ac [31:16] RCA 15:flg R1b */
|
||||
#define MMC_SLEEP_AWAKE 5 /* ac [31:16] RCA 15:flg R1b */
|
||||
#define MMC_SWITCH 6 /* ac [31:0] See below R1b */
|
||||
#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */
|
||||
#define MMC_SEND_EXT_CSD 8 /* adtc R1 */
|
||||
|
|
@ -51,7 +51,7 @@
|
|||
#define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */
|
||||
#define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */
|
||||
#define MMC_SEND_TUNING_BLOCK 19 /* adtc R1 */
|
||||
#define MMC_SEND_TUNING_BLOCK_HS200 21 /* adtc R1 */
|
||||
#define MMC_SEND_TUNING_BLOCK_HS200 21 /* adtc R1 */
|
||||
|
||||
/* class 3 */
|
||||
#define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */
|
||||
|
|
|
|||
|
|
@ -44,11 +44,14 @@ void set_default_configuration()
|
|||
h_cfg.sbar_time_keeping = 0;
|
||||
h_cfg.backlight = 100;
|
||||
h_cfg.autohosoff = 0;
|
||||
h_cfg.errors = 0;
|
||||
h_cfg.autonogc = 1;
|
||||
h_cfg.brand = NULL;
|
||||
h_cfg.tagline = NULL;
|
||||
h_cfg.errors = 0;
|
||||
h_cfg.sept_run = EMC(EMC_SCRATCH0) & EMC_SEPT_RUN;
|
||||
h_cfg.rcm_patched = fuse_check_patched_rcm();
|
||||
h_cfg.sd_timeoff = 0;
|
||||
h_cfg.emummc_force_disable = false;
|
||||
}
|
||||
|
||||
int create_config_entry()
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ typedef struct _hekate_config
|
|||
char *tagline;
|
||||
// Global temporary config.
|
||||
bool se_keygen_done;
|
||||
u32 sbar_time_keeping;
|
||||
u32 errors;
|
||||
int sept_run;
|
||||
bool rcm_patched;
|
||||
u32 sd_timeoff;
|
||||
bool sept_run;
|
||||
bool emummc_force_disable;
|
||||
bool rcm_patched;
|
||||
u32 sbar_time_keeping;
|
||||
u32 sd_timeoff;
|
||||
u32 errors;
|
||||
} hekate_config;
|
||||
|
||||
typedef enum
|
||||
|
|
|
|||
|
|
@ -126,7 +126,10 @@ int keygen(u8 *keyblob, u32 kb, tsec_ctxt_t *tsec_ctxt)
|
|||
|
||||
// We rely on racing conditions, make sure we cover even the unluckiest cases.
|
||||
if (retries > 15)
|
||||
{
|
||||
EPRINTF("\nFailed to get TSEC keys. Please try again.\n");
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -61,6 +61,8 @@ typedef struct _launch_ctxt_t
|
|||
bool debugmode;
|
||||
bool stock;
|
||||
bool atmosphere;
|
||||
bool exo_no_user_exceptions;
|
||||
bool emuMMC;
|
||||
|
||||
ini_sec_t *cfg;
|
||||
} launch_ctxt_t;
|
||||
|
|
|
|||
|
|
@ -93,7 +93,7 @@ static void _touch_parse_event(touch_event *event)
|
|||
}
|
||||
|
||||
// gfx_con_setpos(&gfx_con, 0, 300);
|
||||
// DPRINTF("x = %d \ny = %d \nz: %d \n", event->x, event->y, event->z);
|
||||
// DPRINTF("x = %d \ny = %d \nz = %d \n", event->x, event->y, event->z);
|
||||
// DPRINTF("0 = %02X\n1 = %02x\n2 = %02x\n3 = %02x\n", event->raw[0], event->raw[1], event->raw[2], event->raw[3]);
|
||||
// DPRINTF("4 = %02X\n5 = %02x\n6 = %02x\n7 = %02x\n", event->raw[4], event->raw[5], event->raw[6], event->raw[7]);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -70,6 +70,8 @@
|
|||
#define STMFTS_EV_HOVER_MOTION 0x09
|
||||
#define STMFTS_EV_KEY_STATUS 0x0e
|
||||
#define STMFTS_EV_ERROR 0x0f
|
||||
#define STMFTS_EV_NOISE_READ 0x17
|
||||
#define STMFTS_EV_NOISE_WRITE 0x18
|
||||
|
||||
#define STMFTS_EV_CONTROLLER_READY 0x10
|
||||
#define STMFTS_EV_SLEEP_OUT_CONTROLLER_READY 0x11
|
||||
|
|
|
|||
|
|
@ -549,7 +549,7 @@ void sdram_init()
|
|||
const sdram_params_t *params = (const sdram_params_t *)sdram_get_params();
|
||||
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD_CFG2, 0x05);
|
||||
max77620_regulator_set_voltage(REGULATOR_SD1, 1100000);
|
||||
max77620_regulator_set_voltage(REGULATOR_SD1, 1100000); // Set DRAM voltage.
|
||||
|
||||
PMC(APBDEV_PMC_VDDP_SEL) = params->pmc_vddp_sel;
|
||||
usleep(params->pmc_vddp_sel_wait);
|
||||
|
|
|
|||
|
|
@ -130,7 +130,7 @@
|
|||
#define MAX77620_POWER_MODE_DISABLE 0
|
||||
#define MAX20024_LDO_CFG2_MPOK_MASK (1 << 2)
|
||||
#define MAX77620_LDO_CFG2_ADE_MASK (1 << 1)
|
||||
#define MAX77620_LDO_CFG2_ADE_DISABLE 0
|
||||
#define MAX77620_LDO_CFG2_ADE_DISABLE (0 << 1)
|
||||
#define MAX77620_LDO_CFG2_ADE_ENABLE (1 << 1)
|
||||
#define MAX77620_LDO_CFG2_SS_MASK (1 << 0)
|
||||
#define MAX77620_LDO_CFG2_SS_FAST (1 << 0)
|
||||
|
|
@ -153,6 +153,24 @@
|
|||
#define MAX77620_REG_PUE_GPIO 0x3E
|
||||
#define MAX77620_REG_PDE_GPIO 0x3F
|
||||
#define MAX77620_REG_AME_GPIO 0x40
|
||||
#define MAX77620_CNFG_GPIO_DRV_MASK (1 << 0)
|
||||
#define MAX77620_CNFG_GPIO_DRV_PUSHPULL (1 << 0)
|
||||
#define MAX77620_CNFG_GPIO_DRV_OPENDRAIN (0 << 0)
|
||||
#define MAX77620_CNFG_GPIO_DIR_MASK (1 << 1)
|
||||
#define MAX77620_CNFG_GPIO_DIR_INPUT (1 << 1)
|
||||
#define MAX77620_CNFG_GPIO_DIR_OUTPUT (0 << 1)
|
||||
#define MAX77620_CNFG_GPIO_INPUT_VAL_MASK (1 << 2)
|
||||
#define MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK (1 << 3)
|
||||
#define MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH (1 << 3)
|
||||
#define MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW (0 << 3)
|
||||
#define MAX77620_CNFG_GPIO_INT_MASK (0x3 << 4)
|
||||
#define MAX77620_CNFG_GPIO_INT_FALLING (1 << 4)
|
||||
#define MAX77620_CNFG_GPIO_INT_RISING (1 << 5)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_MASK (0x3 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_None (0x0 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_8ms (0x1 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_16ms (0x2 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_32ms (0x3 << 6)
|
||||
|
||||
#define MAX77620_REG_ONOFFCNFG1 0x41
|
||||
#define MAX77620_ONOFFCNFG1_SFT_RST (1 << 7)
|
||||
|
|
@ -259,25 +277,6 @@
|
|||
#define MAX77620_SD_CFG1_FSRADE_SD_DISABLE 0
|
||||
#define MAX77620_SD_CFG1_FSRADE_SD_ENABLE (1 << 0)
|
||||
|
||||
#define MAX77620_CNFG_GPIO_DRV_MASK (1 << 0)
|
||||
#define MAX77620_CNFG_GPIO_DRV_PUSHPULL (1 << 0)
|
||||
#define MAX77620_CNFG_GPIO_DRV_OPENDRAIN 0
|
||||
#define MAX77620_CNFG_GPIO_DIR_MASK (1 << 1)
|
||||
#define MAX77620_CNFG_GPIO_DIR_INPUT (1 << 1)
|
||||
#define MAX77620_CNFG_GPIO_DIR_OUTPUT 0
|
||||
#define MAX77620_CNFG_GPIO_INPUT_VAL_MASK (1 << 2)
|
||||
#define MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK (1 << 3)
|
||||
#define MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH (1 << 3)
|
||||
#define MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW 0
|
||||
#define MAX77620_CNFG_GPIO_INT_MASK (0x3 << 4)
|
||||
#define MAX77620_CNFG_GPIO_INT_FALLING (1 << 4)
|
||||
#define MAX77620_CNFG_GPIO_INT_RISING (1 << 5)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_MASK (0x3 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_None (0x0 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_8ms (0x1 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_16ms (0x2 << 6)
|
||||
#define MAX77620_CNFG_GPIO_DBNC_32ms (0x3 << 6)
|
||||
|
||||
#define MAX77620_IRQ_LVL2_GPIO_EDGE0 (1 << 0)
|
||||
#define MAX77620_IRQ_LVL2_GPIO_EDGE1 (1 << 1)
|
||||
#define MAX77620_IRQ_LVL2_GPIO_EDGE2 (1 << 2)
|
||||
|
|
|
|||
|
|
@ -24,16 +24,16 @@
|
|||
* Switch Power domains (max77620):
|
||||
* Name | Usage | uV step | uV min | uV default | uV max | Init
|
||||
*-------+---------------+---------+--------+------------+---------+------------------
|
||||
* sd0 | core | 12500 | 600000 | 625000 | 1400000 | 1.125V (pkg1.1)
|
||||
* sd0 | SoC | 12500 | 600000 | 625000 | 1400000 | 1.125V (pkg1.1)
|
||||
* sd1 | SDRAM | 12500 | 600000 | 1125000 | 1125000 | 1.1V (pkg1.1)
|
||||
* sd2 | ldo{0-1, 7-8} | 12500 | 600000 | 1325000 | 1350000 | 1.325V (pcv)
|
||||
* sd3 | 1.8V general | 12500 | 600000 | 1800000 | 1800000 |
|
||||
* ldo0 | Display Panel | 25000 | 800000 | 1200000 | 1200000 | 1.2V (pkg1.1)
|
||||
* ldo1 | XUSB, PCIE | 25000 | 800000 | 1050000 | 1050000 | 1.05V (pcv)
|
||||
* ldo2 | SDMMC1 | 50000 | 800000 | 1800000 | 3300000 |
|
||||
* ldo3 | GC ASIC | 50000 | 800000 | 3100000 | 3100000 | 3.1V (pcv)
|
||||
* ldo3 | GC ASIC | 50000 | 800000 | 3100000 | 3100000 | 3.1V (pcv)
|
||||
* ldo4 | RTC | 12500 | 800000 | 850000 | 850000 |
|
||||
* ldo5 | GC ASIC | 50000 | 800000 | 1800000 | 1800000 | 1.8V (pcv)
|
||||
* ldo5 | GC ASIC | 50000 | 800000 | 1800000 | 1800000 | 1.8V (pcv)
|
||||
* ldo6 | Touch, ALS | 50000 | 800000 | 2900000 | 2900000 | 2.9V
|
||||
* ldo7 | XUSB | 50000 | 800000 | 1050000 | 1050000 |
|
||||
* ldo8 | XUSB, DC | 50000 | 800000 | 1050000 | 1050000 |
|
||||
|
|
|
|||
|
|
@ -182,39 +182,36 @@ void bpmp_clk_rate_set(bpmp_freq_t fid)
|
|||
if (bpmp_clock_set)
|
||||
{
|
||||
// Restore to PLLP source during PLLC4 configuration.
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) =
|
||||
(CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) & 0xFFFF8888) | 0x3333; // PLLP_OUT.
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) = 0x20003333; // PLLP_OUT.
|
||||
// Wait a bit for clock source change.
|
||||
msleep(10);
|
||||
}
|
||||
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_MISC) = (1 << 30);
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_BASE) = 4 | (pllc4_divn[fid] << 8) | (1 << 30); // DIVM: 4, DIVP: 1.
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_MISC) = PLLC4_MISC_EN_LCKDET;
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_BASE) = 4 | (pllc4_divn[fid] << 8) | PLL_BASE_ENABLE; // DIVM: 4, DIVP: 1.
|
||||
|
||||
while (!(CLOCK(CLK_RST_CONTROLLER_PLLC4_BASE) & (1 << 27)))
|
||||
while (!(CLOCK(CLK_RST_CONTROLLER_PLLC4_BASE) & PLLC4_BASE_LOCK))
|
||||
;
|
||||
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_OUT) = (1 << 8) | (1 << 1); // 1.5 div.
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_OUT) |= 1; // Get divider out of reset.
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_OUT) = (1 << 8) | PLLC4_OUT3_CLKEN; // 1.5 div.
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_OUT) |= PLLC4_OUT3_RSTN_CLR; // Get divider out of reset.
|
||||
|
||||
// Wait a bit for PLLC4 to stabilize.
|
||||
msleep(10);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_SYSTEM_RATE) = 3; // PCLK = HCLK / 4.
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) =
|
||||
(CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) & 0xFFFF8888) | 0x3323; // PLLC4_OUT3.
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) = 0x20003323; // PLLC4_OUT3.
|
||||
|
||||
bpmp_clock_set = fid;
|
||||
}
|
||||
else
|
||||
{
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) =
|
||||
(CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) & 0xFFFF8888) | 0x3333; // PLLP_OUT.
|
||||
CLOCK(CLK_RST_CONTROLLER_SCLK_BURST_POLICY) = 0x20003333; // PLLP_OUT.
|
||||
|
||||
// Wait a bit for clock source change.
|
||||
msleep(10);
|
||||
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_SYSTEM_RATE) = 2; // PCLK = HCLK / 3.
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_BASE) &= ~(1<<30);
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLC4_BASE) &= ~PLL_BASE_ENABLE;
|
||||
bpmp_clock_set = BPMP_CLK_NORMAL;
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -25,58 +25,58 @@
|
|||
/* clock_t: reset, enable, source, index, clk_src, clk_div */
|
||||
|
||||
static const clock_t _clock_uart[] = {
|
||||
/* UART A */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_UARTA, 6, 0, 0 },
|
||||
/* UART B */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_UARTB, 7, 0, 0 },
|
||||
/* UART C */ { CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_CONTROLLER_CLK_SOURCE_UARTC, 0x17, 0, 0 },
|
||||
/* UART D */ { 0 },
|
||||
/* UART E */ { 0 }
|
||||
/* UART A */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_UARTA, 6, 0, 2 },
|
||||
/* UART B */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_UARTB, 7, 0, 2 },
|
||||
/* UART C */ { CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_CONTROLLER_CLK_SOURCE_UARTC, 23, 0, 2 },
|
||||
/* UART D */ { CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_UARTD, 1, 0, 2 },
|
||||
/* UART E */ { CLK_RST_CONTROLLER_RST_DEVICES_Y, CLK_RST_CONTROLLER_CLK_OUT_ENB_Y, CLK_RST_CONTROLLER_CLK_SOURCE_UARTAPE, 20, 0, 2 }
|
||||
};
|
||||
|
||||
static const clock_t _clock_i2c[] = {
|
||||
/* I2C1 */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_I2C1, 0xC, 0, 19 }, //20.4MHz -> 100KHz
|
||||
/* I2C1 */ { CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_I2C1, 12, 0, 19 }, //20.4MHz -> 100KHz
|
||||
/* I2C2 */ { 0 },
|
||||
/* I2C3 */ { CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_I2C3, 3, 0, 4 }, //81.6MHz -> 400KHz
|
||||
/* I2C3 */ { CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_I2C3, 3, 0, 4 }, //81.6MHz -> 400KHz
|
||||
/* I2C4 */ { 0 },
|
||||
/* I2C5 */ { CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_CONTROLLER_CLK_SOURCE_I2C5, 0xF, 0, 4 }, //81.6MHz -> 400KHz
|
||||
/* I2C5 */ { CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_RST_CONTROLLER_CLK_SOURCE_I2C5, 15, 0, 4 }, //81.6MHz -> 400KHz
|
||||
/* I2C6 */ { 0 }
|
||||
};
|
||||
|
||||
static clock_t _clock_se = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_RST_CONTROLLER_CLK_SOURCE_SE, 0x1F, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_RST_CONTROLLER_CLK_SOURCE_SE, 31, 0, 0
|
||||
};
|
||||
|
||||
static clock_t _clock_tzram = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_NO_SOURCE, 0x1E, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_V, CLK_RST_CONTROLLER_CLK_OUT_ENB_V, CLK_NO_SOURCE, 30, 0, 0
|
||||
};
|
||||
|
||||
static clock_t _clock_host1x = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X, 0x1C, 4, 3
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X, 28, 4, 3
|
||||
};
|
||||
static clock_t _clock_tsec = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_TSEC, 0x13, 0, 2
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_TSEC, 19, 0, 2
|
||||
};
|
||||
static clock_t _clock_sor_safe = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_Y, CLK_RST_CONTROLLER_CLK_OUT_ENB_Y, CLK_NO_SOURCE, 0x1E, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_Y, CLK_RST_CONTROLLER_CLK_OUT_ENB_Y, CLK_NO_SOURCE, 30, 0, 0
|
||||
};
|
||||
static clock_t _clock_sor0 = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_NO_SOURCE, 0x16, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_NO_SOURCE, 22, 0, 0
|
||||
};
|
||||
static clock_t _clock_sor1 = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_RST_CONTROLLER_CLK_SOURCE_SOR1, 0x17, 0, 2
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_X, CLK_RST_CONTROLLER_CLK_OUT_ENB_X, CLK_RST_CONTROLLER_CLK_SOURCE_SOR1, 23, 0, 2
|
||||
};
|
||||
static clock_t _clock_kfuse = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_NO_SOURCE, 8, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_H, CLK_RST_CONTROLLER_CLK_OUT_ENB_H, CLK_NO_SOURCE, 8, 0, 0
|
||||
};
|
||||
|
||||
static clock_t _clock_cl_dvfs = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_W, CLK_RST_CONTROLLER_CLK_OUT_ENB_W, CLK_NO_SOURCE, 0x1B, 0, 0
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_W, CLK_RST_CONTROLLER_CLK_OUT_ENB_W, CLK_NO_SOURCE, 27, 0, 0
|
||||
};
|
||||
static clock_t _clock_coresight = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_CSITE, 9, 0, 4
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_U, CLK_RST_CONTROLLER_CLK_OUT_ENB_U, CLK_RST_CONTROLLER_CLK_SOURCE_CSITE, 9, 0, 4
|
||||
};
|
||||
|
||||
static clock_t _clock_pwm = {
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_PWM, 0x11, 6, 4
|
||||
CLK_RST_CONTROLLER_RST_DEVICES_L, CLK_RST_CONTROLLER_CLK_OUT_ENB_L, CLK_RST_CONTROLLER_CLK_SOURCE_PWM, 17, 6, 4 // Freference: 6.2MHz.
|
||||
};
|
||||
|
||||
void clock_enable(const clock_t *clk)
|
||||
|
|
@ -375,43 +375,44 @@ static int _clock_sdmmc_config_clock_source_inner(u32 *pout, u32 id, u32 val)
|
|||
u32 divisor = 0;
|
||||
u32 source = PLLP_OUT0;
|
||||
|
||||
// Get IO clock divisor.
|
||||
switch (val)
|
||||
{
|
||||
case 25000:
|
||||
*pout = 24728;
|
||||
divisor = 31;
|
||||
divisor = 31; // 16.5 div.
|
||||
break;
|
||||
case 26000:
|
||||
*pout = 25500;
|
||||
divisor = 30;
|
||||
divisor = 30; // 16 div.
|
||||
break;
|
||||
case 40800:
|
||||
*pout = 40800;
|
||||
divisor = 18;
|
||||
divisor = 18; // 10 div.
|
||||
break;
|
||||
case 50000:
|
||||
*pout = 48000;
|
||||
divisor = 15;
|
||||
divisor = 15; // 8.5 div.
|
||||
break;
|
||||
case 52000:
|
||||
*pout = 51000;
|
||||
divisor = 14;
|
||||
divisor = 14; // 8 div.
|
||||
break;
|
||||
case 100000:
|
||||
*pout = 90667;
|
||||
divisor = 7;
|
||||
divisor = 7; // 4.5 div.
|
||||
break;
|
||||
case 200000:
|
||||
*pout = 163200;
|
||||
divisor = 3;
|
||||
divisor = 3; // 2.5 div.
|
||||
break;
|
||||
case 208000:
|
||||
*pout = 204000;
|
||||
divisor = 2;
|
||||
divisor = 2; // 2 div.
|
||||
break;
|
||||
default:
|
||||
*pout = 24728;
|
||||
divisor = 31;
|
||||
divisor = 31; // 16.5 div.
|
||||
}
|
||||
|
||||
_clock_sdmmc_table[2 * id] = val;
|
||||
|
|
|
|||
|
|
@ -41,6 +41,8 @@
|
|||
#define CLK_RST_CONTROLLER_PLLM_MISC2 0x9C
|
||||
#define CLK_RST_CONTROLLER_PLLP_BASE 0xA0
|
||||
#define CLK_RST_CONTROLLER_PLLD_BASE 0xD0
|
||||
#define CLK_RST_CONTROLLER_PLLD_MISC1 0xD8
|
||||
#define CLK_RST_CONTROLLER_PLLD_MISC 0xDC
|
||||
#define CLK_RST_CONTROLLER_PLLX_BASE 0xE0
|
||||
#define CLK_RST_CONTROLLER_PLLX_MISC 0xE4
|
||||
#define CLK_RST_CONTROLLER_PLLE_BASE 0xE8
|
||||
|
|
@ -50,6 +52,7 @@
|
|||
#define CLK_RST_CONTROLLER_CLK_SOURCE_PWM 0x110
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_I2C1 0x124
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_I2C5 0x128
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_DISP1 0x138
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_VI 0x148
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC1 0x150
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC2 0x154
|
||||
|
|
@ -57,11 +60,13 @@
|
|||
#define CLK_RST_CONTROLLER_CLK_SOURCE_UARTA 0x178
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_UARTB 0x17C
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X 0x180
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_I2C2 0x198
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_EMC 0x19C
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_UARTC 0x1A0
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_I2C3 0x1B8
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC3 0x1BC
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_UARTD 0x1C0
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_CSITE 0x1D4
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_EMC 0x19C
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_TSEC 0x1F4
|
||||
#define CLK_RST_CONTROLLER_CLK_OUT_ENB_X 0x280
|
||||
#define CLK_RST_CONTROLLER_CLK_ENB_X_SET 0x284
|
||||
|
|
@ -95,10 +100,12 @@
|
|||
#define CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRC 0x3A0
|
||||
#define CLK_RST_CONTROLLER_LVL2_CLK_GATE_OVRD 0x3A4
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_MSELECT 0x3B4
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_I2C4 0x3C4
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SYS 0x400
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SOR1 0x410
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SE 0x42C
|
||||
#define CLK_RST_CONTROLLER_CLK_ENB_V_SET 0x440
|
||||
//#define CLK_RST_CONTROLLER_CLK_ENB_V_CLR 0x444
|
||||
#define CLK_RST_CONTROLLER_CLK_ENB_V_CLR 0x444
|
||||
#define CLK_RST_CONTROLLER_CLK_ENB_W_SET 0x448
|
||||
#define CLK_RST_CONTROLLER_CLK_ENB_W_CLR 0x44C
|
||||
#define CLK_RST_CONTROLLER_RST_CPUG_CMPLX_SET 0x450
|
||||
|
|
@ -114,15 +121,25 @@
|
|||
#define CLK_RST_CONTROLLER_PLLC4_OUT 0x5E4
|
||||
#define CLK_RST_CONTROLLER_PLLMB_BASE 0x5E8
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_DSIA_LP 0x620
|
||||
//#define CLK_RST_CONTROLLER_CLK_SOURCE_I2C6 0x65C
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_I2C6 0x65C
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_EMC_DLL 0x664
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_UART_FST_MIP_CAL 0x66C
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC_LEGACY_TM 0x694
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_NVENC 0x6A0
|
||||
#define CLK_RST_CONTROLLER_SE_SUPER_CLK_DIVIDER 0x704
|
||||
#define CLK_RST_CONTROLLER_CLK_SOURCE_UARTAPE 0x710
|
||||
|
||||
#define CLK_NO_SOURCE 0x0
|
||||
|
||||
/*! PLL control and status bits */
|
||||
#define PLL_BASE_ENABLE (1 << 30)
|
||||
|
||||
#define PLLC4_MISC_EN_LCKDET (1 << 30)
|
||||
#define PLLC4_BASE_LOCK (1 << 27)
|
||||
#define PLLC4_BASE_IDDQ (1 << 18)
|
||||
#define PLLC4_OUT3_CLKEN (1 << 1)
|
||||
#define PLLC4_OUT3_RSTN_CLR (1 << 0)
|
||||
|
||||
/*! Generic clock descriptor. */
|
||||
typedef struct _clock_t
|
||||
{
|
||||
|
|
|
|||
|
|
@ -35,12 +35,12 @@ void _cluster_enable_power()
|
|||
// Enable cores power.
|
||||
// 1-3.x: MAX77621_NFSR_ENABLE.
|
||||
i2c_send_byte(I2C_5, MAX77621_CPU_I2C_ADDR, MAX77621_CONTROL1_REG,
|
||||
MAX77621_AD_ENABLE | MAX77621_NFSR_ENABLE | MAX77621_SNS_ENABLE);
|
||||
MAX77621_AD_ENABLE | MAX77621_NFSR_ENABLE | MAX77621_SNS_ENABLE | MAX77621_RAMP_12mV_PER_US);
|
||||
// 1.0.0-3.x: MAX77621_T_JUNCTION_120 | MAX77621_CKKADV_TRIP_DISABLE | MAX77621_INDUCTOR_NOMINAL.
|
||||
i2c_send_byte(I2C_5, MAX77621_CPU_I2C_ADDR, MAX77621_CONTROL2_REG,
|
||||
MAX77621_T_JUNCTION_120 | MAX77621_WDTMR_ENABLE | MAX77621_CKKADV_TRIP_75mV_PER_US| MAX77621_INDUCTOR_NOMINAL);
|
||||
i2c_send_byte(I2C_5, MAX77621_CPU_I2C_ADDR, MAX77621_VOUT_REG, MAX77621_VOUT_ENABLE | 0x37);
|
||||
i2c_send_byte(I2C_5, MAX77621_CPU_I2C_ADDR, MAX77621_VOUT_DVC_REG, MAX77621_VOUT_ENABLE | 0x37);
|
||||
i2c_send_byte(I2C_5, MAX77621_CPU_I2C_ADDR, MAX77621_VOUT_REG, MAX77621_VOUT_ENABLE | MAX77621_VOUT_0_95V);
|
||||
i2c_send_byte(I2C_5, MAX77621_CPU_I2C_ADDR, MAX77621_VOUT_DVC_REG, MAX77621_VOUT_ENABLE | MAX77621_VOUT_0_95V);
|
||||
}
|
||||
|
||||
int _cluster_pmc_enable_partition(u32 part, u32 toggle, bool enable)
|
||||
|
|
@ -120,10 +120,10 @@ void cluster_boot_cpu0(u32 entry)
|
|||
EXCP_VEC(EVP_CPU_RESET_VECTOR) = 0;
|
||||
|
||||
// Set reset vector.
|
||||
SB(SB_AA64_RESET_LOW) = entry | 1;
|
||||
SB(SB_AA64_RESET_LOW) = entry | SB_AA64_RST_AARCH64_MODE_EN;
|
||||
SB(SB_AA64_RESET_HIGH) = 0;
|
||||
// Non-secure reset vector write disable.
|
||||
SB(SB_CSR) = 2;
|
||||
SB(SB_CSR) = SB_CSR_NS_RST_VEC_WR_DIS;
|
||||
(void)SB(SB_CSR);
|
||||
|
||||
// Clear MSELECT reset.
|
||||
|
|
|
|||
|
|
@ -44,10 +44,10 @@ static int _i2c_send_pkt(u32 idx, u32 x, u8 *buf, u32 size)
|
|||
memcpy(&tmp, buf, size);
|
||||
|
||||
vu32 *base = (vu32 *)i2c_addrs[idx];
|
||||
base[I2C_CMD_ADDR0] = x << 1; //Set x (send mode).
|
||||
base[I2C_CMD_DATA1] = tmp; //Set value.
|
||||
base[I2C_CNFG] = (2 * size - 2) | 0x2800; //Set size and send mode.
|
||||
_i2c_wait(base); //Kick transaction.
|
||||
base[I2C_CMD_ADDR0] = x << 1; //Set x (send mode).
|
||||
base[I2C_CMD_DATA1] = tmp; //Set value.
|
||||
base[I2C_CNFG] = ((size - 1) << 1) | 0x2800; //Set size and send mode.
|
||||
_i2c_wait(base); //Kick transaction.
|
||||
|
||||
base[I2C_CNFG] = (base[I2C_CNFG] & 0xFFFFFDFF) | 0x200;
|
||||
while (base[I2C_STATUS] & 0x100)
|
||||
|
|
@ -65,9 +65,9 @@ static int _i2c_recv_pkt(u32 idx, u8 *buf, u32 size, u32 x)
|
|||
return 0;
|
||||
|
||||
vu32 *base = (vu32 *)i2c_addrs[idx];
|
||||
base[I2C_CMD_ADDR0] = (x << 1) | 1; // Set x (recv mode).
|
||||
base[I2C_CNFG] = (size - 1) << 1 | 0x2840; // Set size and recv mode.
|
||||
_i2c_wait(base); // Kick transaction.
|
||||
base[I2C_CMD_ADDR0] = (x << 1) | 1; // Set x (recv mode).
|
||||
base[I2C_CNFG] = ((size - 1) << 1) | 0x2840; // Set size and recv mode.
|
||||
_i2c_wait(base); // Kick transaction.
|
||||
|
||||
base[I2C_CNFG] = (base[I2C_CNFG] & 0xFFFFFDFF) | 0x200;
|
||||
while (base[I2C_STATUS] & 0x100)
|
||||
|
|
|
|||
|
|
@ -51,20 +51,24 @@
|
|||
#define PINMUX_AUX_GPIO_X3_AUD 0x190
|
||||
#define PINMUX_AUX_SPDIF_IN 0x1A4
|
||||
#define PINMUX_AUX_USB_VBUS_EN0 0x1A8
|
||||
#define PINMUX_AUX_USB_VBUS_EN1 0x1AC
|
||||
#define PINMUX_AUX_WIFI_EN 0x1B4
|
||||
#define PINMUX_AUX_WIFI_RST 0x1B8
|
||||
#define PINMUX_AUX_AP_WAKE_NFC 0x1CC
|
||||
#define PINMUX_AUX_NFC_EN 0x1D0
|
||||
#define PINMUX_AUX_NFC_INT 0x1D4
|
||||
#define PINMUX_AUX_CAM1_PWDN 0x1EC
|
||||
#define PINMUX_AUX_CAM2_PWDN 0x1F0
|
||||
#define PINMUX_AUX_LCD_BL_PWM 0x1FC
|
||||
#define PINMUX_AUX_LCD_BL_EN 0x200
|
||||
#define PINMUX_AUX_LCD_RST 0x204
|
||||
#define PINMUX_AUX_LCD_GPIO2 0x20C
|
||||
#define PINMUX_AUX_TOUCH_INT 0x220
|
||||
#define PINMUX_AUX_MOTION_INT 0x224
|
||||
#define PINMUX_AUX_BUTTON_HOME 0x240
|
||||
#define PINMUX_AUX_GPIO_PE6 0x248
|
||||
#define PINMUX_AUX_GPIO_PH6 0x250
|
||||
#define PINMUX_AUX_GPIO_PK3 0x260
|
||||
#define PINMUX_AUX_GPIO_PZ1 0x280
|
||||
/*! 0:UART-A, 1:UART-B, 3:UART-C, 3:UART-D */
|
||||
#define PINMUX_AUX_UARTX_TX(x) (0xE4 + 0x10 * (x))
|
||||
|
|
|
|||
|
|
@ -25,6 +25,7 @@
|
|||
#define APBDEV_PMC_PWRGATE_TOGGLE 0x30
|
||||
#define APBDEV_PMC_PWRGATE_STATUS 0x38
|
||||
#define APBDEV_PMC_NO_IOPOWER 0x44
|
||||
#define PMC_NO_IOPOWER_SDMMC1_IO_EN (1 << 12)
|
||||
#define APBDEV_PMC_SCRATCH0 0x50
|
||||
#define APBDEV_PMC_SCRATCH1 0x54
|
||||
#define APBDEV_PMC_SCRATCH20 0xA0
|
||||
|
|
@ -37,6 +38,7 @@
|
|||
#define APBDEV_PMC_SCRATCH33 0x120
|
||||
#define APBDEV_PMC_SCRATCH40 0x13C
|
||||
#define APBDEV_PMC_OSC_EDPD_OVER 0x1A4
|
||||
#define PMC_OSC_EDPD_OVER_OSC_CTRL_OVER 0x400000
|
||||
#define APBDEV_PMC_RST_STATUS 0x1B4
|
||||
#define APBDEV_PMC_IO_DPD_REQ 0x1B8
|
||||
#define APBDEV_PMC_IO_DPD2_REQ 0x1C0
|
||||
|
|
@ -51,9 +53,11 @@
|
|||
#define APBDEV_PMC_REG_SHORT 0x2CC
|
||||
#define APBDEV_PMC_SEC_DISABLE3 0x2D8
|
||||
#define APBDEV_PMC_SECURE_SCRATCH21 0x334
|
||||
#define PMC_FUSE_PRIVATEKEYDISABLE_TZ_STICKY_BIT 0x10
|
||||
#define APBDEV_PMC_SECURE_SCRATCH32 0x360
|
||||
#define APBDEV_PMC_SECURE_SCRATCH49 0x3A4
|
||||
#define APBDEV_PMC_CNTRL2 0x440
|
||||
#define PMC_CNTRL2_HOLD_CKE_LOW_EN 0x1000
|
||||
#define APBDEV_PMC_IO_DPD3_REQ 0x45C
|
||||
#define APBDEV_PMC_IO_DPD4_REQ 0x464
|
||||
#define APBDEV_PMC_UTMIP_PAD_CFG1 0x4C4
|
||||
|
|
|
|||
|
|
@ -20,6 +20,7 @@
|
|||
#include "../utils/types.h"
|
||||
|
||||
#define BOOTROM_BASE 0x100000
|
||||
#define IRAM_BASE 0x40000000
|
||||
#define HOST1X_BASE 0x50000000
|
||||
#define BPMP_CACHE_BASE 0x50040000
|
||||
#define DISPLAY_A_BASE 0x54200000
|
||||
|
|
@ -106,9 +107,11 @@
|
|||
/*! Misc registers. */
|
||||
#define APB_MISC_PP_STRAPPING_OPT_A 0x08
|
||||
#define APB_MISC_PP_PINMUX_GLOBAL 0x40
|
||||
#define APB_MISC_GP_HIDREV 0x804
|
||||
#define APB_MISC_GP_LCD_BL_PWM_CFGPADCTRL 0xA34
|
||||
#define APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL 0xA98
|
||||
#define APB_MISC_GP_EMMC4_PAD_CFGPADCTRL 0xAB4
|
||||
#define APB_MISC_GP_EMMC4_PAD_PUPD_CFGPADCTRL 0xABC
|
||||
#define APB_MISC_GP_WIFI_EN_CFGPADCTRL 0xB64
|
||||
#define APB_MISC_GP_WIFI_RST_CFGPADCTRL 0xB68
|
||||
|
||||
|
|
@ -118,7 +121,10 @@
|
|||
|
||||
/*! Secure boot registers. */
|
||||
#define SB_CSR 0x0
|
||||
#define SB_CSR_NS_RST_VEC_WR_DIS (1 << 1)
|
||||
#define SB_CSR_PIROM_DISABLE (1 << 4)
|
||||
#define SB_AA64_RESET_LOW 0x30
|
||||
#define SB_AA64_RST_AARCH64_MODE_EN (1 << 0)
|
||||
#define SB_AA64_RESET_HIGH 0x34
|
||||
|
||||
/*! SOR registers. */
|
||||
|
|
@ -182,6 +188,7 @@
|
|||
/*! PWM registers. */
|
||||
#define PWM_CONTROLLER_PWM_CSR_0 0x00
|
||||
#define PWM_CONTROLLER_PWM_CSR_1 0x10
|
||||
#define PWM_CSR_EN (1 << 31)
|
||||
|
||||
/*! Special registers. */
|
||||
#define EMC_SCRATCH0 0x324
|
||||
|
|
|
|||
|
|
@ -22,9 +22,8 @@
|
|||
#define UART_A 0
|
||||
#define UART_B 1
|
||||
#define UART_C 2
|
||||
//TODO: define clock inits for those.
|
||||
/*#define UART_D 3
|
||||
#define UART_E 4*/
|
||||
#define UART_D 3
|
||||
#define UART_E 4
|
||||
|
||||
#define BAUD_115200 115200
|
||||
|
||||
|
|
@ -34,15 +33,29 @@
|
|||
#define UART_TX_FIFO_FULL 0x100
|
||||
#define UART_RX_FIFO_EMPTY 0x200
|
||||
|
||||
#define UART_INVERT_RXD 0x01
|
||||
#define UART_INVERT_TXD 0x02
|
||||
#define UART_INVERT_CTS 0x04
|
||||
#define UART_INVERT_RTS 0x08
|
||||
|
||||
#define UART_IER_DLAB_IE_EORD 0x20
|
||||
|
||||
#define UART_LCR_DLAB 0x80
|
||||
#define UART_LCR_STOP 0x4
|
||||
#define UART_LCR_WORD_LENGTH_8 0x3
|
||||
|
||||
#define UART_LSR_RDR 0x1
|
||||
#define UART_LSR_THRE 0x20
|
||||
#define UART_LSR_TMTY 0x40
|
||||
#define UART_LSR_FIFOE 0x80
|
||||
|
||||
#define UART_IIR_FCR_TX_CLR 0x4
|
||||
#define UART_IIR_FCR_RX_CLR 0x2
|
||||
#define UART_IIR_FCR_EN_FIFO 0x1
|
||||
|
||||
#define UART_MCR_RTS 0x2
|
||||
#define UART_MCR_DTR 0x1
|
||||
|
||||
typedef struct _uart_t
|
||||
{
|
||||
/* 0x00 */ vu32 UART_THR_DLAB;
|
||||
|
|
|
|||
|
|
@ -31,7 +31,7 @@
|
|||
#define MMC_ALL_SEND_CID 2 /* bcr R2 */
|
||||
#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
|
||||
#define MMC_SET_DSR 4 /* bc [31:16] RCA */
|
||||
#define MMC_SLEEP_AWAKE 5 /* ac [31:16] RCA 15:flg R1b */
|
||||
#define MMC_SLEEP_AWAKE 5 /* ac [31:16] RCA 15:flg R1b */
|
||||
#define MMC_SWITCH 6 /* ac [31:0] See below R1b */
|
||||
#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */
|
||||
#define MMC_SEND_EXT_CSD 8 /* adtc R1 */
|
||||
|
|
@ -51,7 +51,7 @@
|
|||
#define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */
|
||||
#define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */
|
||||
#define MMC_SEND_TUNING_BLOCK 19 /* adtc R1 */
|
||||
#define MMC_SEND_TUNING_BLOCK_HS200 21 /* adtc R1 */
|
||||
#define MMC_SEND_TUNING_BLOCK_HS200 21 /* adtc R1 */
|
||||
|
||||
/* class 3 */
|
||||
#define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@ u16 tmp451_get_pcb_temp(bool intenger)
|
|||
|
||||
void tmp451_init()
|
||||
{
|
||||
// Disable ALARM.
|
||||
// Disable ALARM and Range to 0 - 127 oC.
|
||||
i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_CONFIG_REG, 0x80);
|
||||
|
||||
// Set conversion rate to 32/s and make a read to update the reg.
|
||||
|
|
|
|||
|
|
@ -53,6 +53,7 @@ typedef int bool;
|
|||
|
||||
#define BOOT_CFG_AUTOBOOT_EN (1 << 0)
|
||||
#define BOOT_CFG_FROM_LAUNCH (1 << 1)
|
||||
#define BOOT_CFG_FROM_ID (1 << 2)
|
||||
#define BOOT_CFG_SEPT_RUN (1 << 7)
|
||||
|
||||
#define EXTRA_CFG_KEYS (1 << 0)
|
||||
|
|
@ -64,11 +65,18 @@ typedef int bool;
|
|||
|
||||
typedef struct __attribute__((__packed__)) _boot_cfg_t
|
||||
{
|
||||
u8 boot_cfg;
|
||||
u8 autoboot;
|
||||
u8 autoboot_list;
|
||||
u8 extra_cfg;
|
||||
u8 rsvd[128];
|
||||
u8 boot_cfg;
|
||||
u8 autoboot;
|
||||
u8 autoboot_list;
|
||||
u8 extra_cfg;
|
||||
union
|
||||
{
|
||||
struct
|
||||
{
|
||||
char id[8];
|
||||
};
|
||||
u8 xt_str[0x80];
|
||||
};
|
||||
} boot_cfg_t;
|
||||
|
||||
typedef struct __attribute__((__packed__)) _ipl_ver_meta_t
|
||||
|
|
|
|||
Loading…
Reference in a new issue