Tomasz Moń
804a40830e
Fix race conditions and misconfiguration in sdmmc
...
Properly configure pull up and pull down offsets for autocal.
Run autocal prior to every transfer.
Prevent race conditions in sdmmc_wait_for_event() - make sure the fault
handler has highest priority, then the target irq, state conditions and
finally the error mask.
Do not clear all bits (|=) when acknowledging fault conditions,
only acknowledge the fault conditions itself.
Enable interrupts before preparing command registers - if sdmmc is fast
enough it can actually finish transfer before we enabled the interrupts.
Enabling interrupts clears the COMMAND COMPLETE status bit.
Temporarily print all the sdmmc messages in stage2 - for yet unknown
reason respecting the log level results in some failures.
This results in working microsd card in stage2 on my switch with Samsung
EVO+ 256GB microsd card.
2018-06-09 17:37:53 +02:00
Tomasz Moń
7b9dcd2f1a
Make sdmmc autocalibration follow TRM procedure
...
Sleep for 1 us, not 1 ms.
Timeout after 10 ms, set driver strength code values according to TRM.
Fix typo (mS) - time is in milliseconds, not milliSiemens.
2018-06-05 19:07:14 +02:00
TuxSH
0491a21a99
Fix logic bug in stage2's main function
2018-06-05 16:18:02 +02:00
Max K
6b7da2887f
package2 verification and ini1 merging fixes ( #125 )
...
* fusee: Incremet offset while reading kip1s
* fusee: Pass package2 section data along with the decrypted metadata
2018-06-04 14:04:44 -07:00
hexkyz
ec164b8606
Fix credits
2018-06-04 19:31:08 +01:00
TuxSH
b2139ed182
Pass screen status and mmc struct from stage1 to 2
2018-06-04 19:17:23 +02:00
hexkyz
116eb6c67c
Merge pull request #73 from Resaec/uart
...
Add UART register enumerators
2018-06-04 16:33:43 +01:00
hexkyz
7e5fda86b2
Merge pull request #114 from desowin/sdmmc-errata
...
Set SDMMC controller to SDR104 as a workaround
2018-06-04 16:20:19 +01:00
hexkyz
bfaa618749
Merge pull request #121 from langerhans/lh/kernel-hash-4x
...
fusee: Add kernel hash for 4.x
2018-06-04 16:17:22 +01:00
Kate Temkin
810f7095a9
remove myself from the list of maintainers
2018-06-04 00:08:54 -06:00
TuxSH
af8f63c187
Merge pull request #122 from neobrain/master
...
Build fix
2018-06-03 18:35:17 +02:00
Tony Wasserka
0359d6535b
Build fix
2018-06-03 18:31:03 +02:00
langerhans
41429e9120
fusee: Add kernel hash for 4.x
2018-06-03 16:59:21 +02:00
Tony Wasserka
edc099f026
Use "final" and "override" where appropriate ( #117 )
2018-06-02 22:46:27 -07:00
Michael Scire
bb636dc05a
SM: Make Mitm compile-time toggleable, to forestall whining.
2018-06-02 23:42:01 -06:00
Michael Scire
80f40caf67
SM: Add IPC commands for first-class MITM installation.
2018-06-02 23:38:01 -06:00
Michael Scire
968c86578a
Fusee: Add 5.x kernel patches to allow for IPC PID mitm.
2018-06-02 20:01:44 -06:00
Michael Scire
cc69079d73
Fusee: Add mechanism for branching back at end of hook.
2018-06-02 19:11:50 -06:00
Max K
8ec3a53d73
Fix CCPLEX bringup and halt the BPMP once it's done booting. ( #118 )
2018-06-02 17:24:02 -07:00
Michael Scire
b3a7086b7e
Fusee: Add infrastructure for applying kernel patches (needed for mitm)
2018-06-02 16:06:31 -06:00
Michael Scire
1ba8a92030
Fusee: Separate kernel patching into its own file.
2018-06-02 16:06:31 -06:00
hexkyz
7a27322044
Boot: Fully implemented GPIO and PINMUX handling
2018-06-02 22:32:51 +01:00
Michael Scire
fa4c219395
Exosphere: Fix bugs, now boots 5.1.0 successfully.
2018-06-01 22:20:04 -06:00
Michael Scire
b566d04036
Exosphere: Fix 4.0+ hang while waiting for BPMP shutdown.
2018-06-01 01:39:08 -06:00
Michael Scire
af9bee6e7f
Exosphere: Fix SE definition bug, misc other bugs. Now boots on 1.0.0
2018-06-01 00:46:05 -06:00
Michael Scire
1058ac7b2d
Exosphere: Fix MMIO configuration on low firmware versions.
2018-05-31 18:32:51 -06:00
Tomasz Moń
0534e36cf8
Set SDMMC controller to SDR104 as a workaround
...
According to Tegra X1 Series Processors Silicon Errata there is possible
misalignment of received data which results in a CRC error. The issue is
present only in SDR50 mode.
2018-05-27 17:43:25 +02:00
TuxSH
c9723d7b68
Refactor fusee's makefile
2018-05-27 00:59:02 +02:00
TuxSH
ad5be3cae5
Refactor exosphère's linker script
...
To properly separate text/rodata/data+bss, page-alignment needs to be added, as well as some symbol definitions and support code...
2018-05-27 00:36:41 +02:00
TuxSH
d57f4c54a9
Fix mmc->allow_voltage_switching assignment in sdmmc_init
2018-05-24 17:39:36 +02:00
TuxSH
4d43a86b60
Copy latest sdmmc driver to stage2
2018-05-24 01:17:13 +02:00
TuxSH
fd77e5543e
Add debug comment for exosphère
2018-05-23 18:46:39 +02:00
TuxSH
16ad355f45
Unstub "Validate section hashes."
2018-05-23 18:45:53 +02:00
Kate J. Temkin
eaf8e559d6
fusee: work around some dual-init SDMMC issues
2018-05-23 07:47:02 -06:00
Michael Scire
ef9adabb40
Exosphere: Fix MC carveout setup bug, now receives smcCpuOn from kernel on 1.0.0.
2018-05-21 20:14:18 -06:00
hexkyz
b777844d2d
Boot: Implement PMC wake pin events
2018-05-21 21:32:57 +01:00
TuxSH
a4b1cf8b50
Stage1: fix SE issue too
2018-05-21 21:18:30 +02:00
Michael Scire
c64d7904b4
Fusee: Fix se_calculate_sha256
2018-05-21 13:07:46 -06:00
TuxSH
561fa90669
Use uintX_t for the SE & copy bugfixed SE struct definition
2018-05-21 19:05:00 +02:00
TuxSH
f39622c421
Stage2: Fix bug, add more debug printfs to nxboot. The CCPLEX doesn't turn on
2018-05-21 18:42:42 +02:00
TuxSH
5920f5a4b0
Stage2: fix various bugs in package2.c
2018-05-21 18:18:12 +02:00
TuxSH
ffd0b5df6a
Fix bug in stratosphere_get_ini1, etc.
2018-05-21 17:45:05 +02:00
TuxSH
0e9a304533
stage2: package2: bypass hash checks for now
2018-05-21 17:42:10 +02:00
TuxSH
ecb83903c0
Stage1: fix potential alignment issue
2018-05-21 14:18:03 +02:00
Michael Scire
366cc5e189
Exosphere: Fix extremely spooky Security Engine bugs, now makes it to the end of package2loader.
2018-05-21 04:30:53 -06:00
Kate J. Temkin
ac7ee45493
fusee: improve SDR104 frequency and support AUTOCMD23
2018-05-21 04:24:50 -06:00
TuxSH
bf2c6dff25
Stage2: Add exception handlers
2018-05-21 03:50:53 +02:00
TuxSH
c1687905a3
Fix stack overflow when chainloading stage2
2018-05-21 03:42:05 +02:00
TuxSH
ea2693dd2d
Fix exception handlers (thanks @fincs)
2018-05-21 03:39:18 +02:00
TuxSH
43d1816ac2
[stage1] Add exception handlers... which somehow don't work?
2018-05-21 02:24:41 +02:00
