CTCaer
1ccce5f1a2
gfx: Fix off-by-one in right half of 16px rendering
2019-12-16 21:49:54 +02:00
CTCaer
2aaa0331ac
rtc: Add epoch convertion functions
...
Thanks @shchmue for the HOS conversion
2019-12-14 22:27:07 +02:00
CTCaer
7604239237
bpmp: Update driver to latest
2019-12-14 22:21:42 +02:00
CTCaer
1e4d63731b
nyx: Fix about screen 2nd pane left margin
2019-12-12 00:20:14 +02:00
CTCaer
a664118fc7
r2p: Update r2p payload
...
2 modes:
- With updater2p; Forces the reboot to payload binary to be hekate
- Without; Checks if hekate and then if old
2019-12-12 00:13:32 +02:00
CTCaer
c6e92311f9
Add error printing for issues with libraries
...
It will now show erros for the following:
- Missing or old libsys_minerva.bso (DRAM training).
- Missing libsys_lp0.bso (LP0 sleep mode).
- Missing or old Nyx version
2019-12-11 11:22:11 +02:00
CTCaer
24d30a40f9
hos: Add Atmosphere's system mem increase patches
2019-12-10 19:20:02 +02:00
CTCaer
e4f7928513
minerva: Fix compatibility check for hekate main
...
Init now also returns status.
2019-12-09 22:27:01 +02:00
CTCaer
bd8a5ece58
heap: Fix type for heap monitor memset size
2019-12-09 19:30:45 +02:00
CTCaer
4c5a78de6f
hos: Fix pkg2 keygen with newer sept
...
This change also adds support for older sept binaries.
2019-12-08 18:32:09 +02:00
CTCaer
c12c696e53
hos: Add 9.1.0 support
2019-12-08 03:01:21 +02:00
CTCaer
f256bd5909
Move all I/DRAM addresses into a memory map
...
Many addresses were moved around to pack the memory usage!
2019-12-08 02:23:03 +02:00
CTCaer
0290892b23
nyx hw reconfig: Add fan and 5V regulators deinit
...
Additionally re-arrange minerva and mmu after these.
2019-12-08 01:41:57 +02:00
CTCaer
643a8ea8f9
fan: Update driver
...
Make use of 5V regulator driver and fixe some bugs
2019-12-08 01:38:12 +02:00
CTCaer
a6d8854499
power: Add 5V regulator driver
2019-12-08 01:36:35 +02:00
CTCaer
96bafd8bd7
nyx: Use color when battery voltage < 3200mV
...
For status bar and Battery Info.
2019-12-08 01:32:26 +02:00
CTCaer
65ee728939
nyx: Enable fan when temps are high
2019-12-08 01:26:26 +02:00
CTCaer
e1748a0727
nyx: Boost eMMC backup/restore verification times
...
This change allows SE to start verifying the first buffer while the 2nd is populated. Effectively cutting verification down to almost half.
2019-12-08 01:20:05 +02:00
CTCaer
35e853fd03
touch: Change I2C4 pinmuxing as per HOS
2019-12-07 23:23:01 +02:00
CTCaer
7e26be6587
lvgl: Optimize color blending
...
The manual optimization done dramatically increases performance in software color blending.
Isolated gains reach 20-30%.
Color blending calculates 2 +1 color channels instead of the expensive 1+1+1 calculations.
This is as best as it gets without going in asm optimizations.
2019-12-07 20:47:19 +02:00
Kostas Missos
48c15a8fde
nyx: Release the shackles
2019-12-07 20:16:38 +02:00
Kostas Missos
0b45a5a11a
bpmp: Reduce freq to 589MHz
...
3 users had issues with 602MHz.
This will probably bring the SoC binning compatibility to 100%.
Additionally, make it easy to change default boost frequency.
The tiny loss in perf, will be mitigated in Nyx. (It's actually even faster)
2019-12-07 02:01:29 +02:00
Kostas Missos
bc7dec2e61
bpmp: Add forcable maintenance
...
+ Fix build issues
2019-12-07 01:47:44 +02:00
CTCaer
9811ba53e0
pmic: Enable Low Battery Shutdown for 2.8V
...
There's an increasing ammount of users that kill their batteries when forgetting their devices into AutoRCM / RCM mode.
This will now force a shutdown the moment the battery reaches 2.8V. Even if device is inside RCM mode.
Notice: We might need to increase the limit.
2019-12-04 22:06:34 +02:00
CTCaer
a16b1af698
pmic: Always ensure that values were written
2019-12-04 22:02:17 +02:00
CTCaer
641a57a4f6
hos/mtc: Add FSP WAR and boost HOS booting times
...
By implementing FSP WAR we can allow HOS to boot in 1600MHz and be able to switch frequency without hanging.
2019-12-04 21:59:58 +02:00
CTCaer
84328aa676
minerva: Make use of new minerva
...
- Training and switch is now faster
- Compatibility checks: New Minerva does not allow old binaries. New binaries do not allow old Minerva
- MTC table is now in a safe region
- Periodic training period increased to every 250ms
2019-12-04 21:56:45 +02:00
CTCaer
dd8ec0d28b
clock: Always wait 2us before deasserting reset
2019-12-04 21:32:51 +02:00
CTCaer
0b1eebefe1
Small refactor and bugfixes
2019-12-04 21:31:39 +02:00
CTCaer
168de9ddd8
sdmmc: Ensure aligned DMA buffers
2019-12-04 19:42:25 +02:00
CTCaer
b61b212218
lvgl heap: Align addresses & sizes to cache line size
2019-12-04 19:04:11 +02:00
CTCaer
ec10b572d1
heap: Quality updates to heap management
...
- Allow reuse of unused sections that fit exactly to selected allocation size. Decreases fragmentation dramatically.
- Always allocate and align mapped memory to selected alignment. Avoids having fragmented unused maps that are not aligned.
- Use a static alignment based on BPMP and generally average cache line size. Boosts performance when MMU is used.
2019-12-04 19:02:28 +02:00
CTCaer
d1e50c558e
sdram: Refactor and fix some bugs in init
2019-12-04 18:53:36 +02:00
CTCaer
2c1da3a97d
se: Upgrade SE and allow SHA calc continue
...
- Allow SHA to calculate sizes > 16MB and refactor sha function
- Name various registers and magic numbers
- Fix various key access bugs
In a later commit this new design will boost verification times significantly and also allow full SHA256 hashes.
2019-12-04 17:18:16 +02:00
CTCaer
29a51124fd
Simplify string ops with already compiled-in functions
2019-12-04 15:56:53 +02:00
Kostas Missos
598073e50c
ext patches: Remove patches_template.ini load
...
Remove patches_template.ini load.
- It has useless patches, which some times, users confuse them for "bad" patches, even though they aren't.
- No one reads on how it works and it's constantly mishandled when there's no patches.ini (which completely overrides it).
- It was not supposed to be edited.
Also release will not include it anymore.
Template will still exist for demonstrating the syntax of `patches.ini`
This commit also corrects the patches.ini encoding note as ASCII.
2019-10-31 16:26:46 +02:00
shchmue
426c86182d
heap: Prevent node chain collapse on free
2019-10-25 11:20:38 -06:00
CTCaer
65fbdfddbf
kfuse: Ensure that kfuse is ready 100% for tsec
2019-10-22 18:57:51 +03:00
Kostas Missos
7c42f72b8a
refactor: Remove all unwanted whitespace
2019-10-18 18:02:06 +03:00
CTCaer
e24bb44adf
hos: Add full 9.0.0 support
2019-09-12 23:41:08 +03:00
CTCaer
40afcfd686
hos: Support pkg2 encrypted with newer mkeys
2019-09-12 23:39:47 +03:00
CTCaer
658c3c112f
hos: automatically find new kernel ini1 offset
2019-09-12 23:37:00 +03:00
CTCaer
8033ba461f
SE: Boost its speed while BPMP cache is on
...
Plus add se_aes_crypt_ecb().
Thanks @shchmue for pointing out that speed bump
2019-09-12 23:27:04 +03:00
CTCaer
8cef81c901
nyx: Fix some inconsistencies with transparency
2019-09-12 23:20:38 +03:00
CTCaer
08d212d4da
FatFS: Update to R0.13c (p4) and fix some crit issues
2019-09-12 23:18:39 +03:00
CTCaer
252a57ef6a
util: Utilize BPMP sleep when usleep is out of bounds
2019-09-12 23:12:17 +03:00
CTCaer
23e246f224
i2c: Add missing clocks + more refactoring
2019-09-12 23:11:17 +03:00
CTCaer
3028568019
pmc-ccplex: Have proper Power Domain toggling
2019-09-12 23:09:38 +03:00
CTCaer
a8d529cf6a
Refactoring and comment adding
2019-09-12 23:08:38 +03:00
CTCaer
c5b64a2b58
tsec: Don't disable HOST1x clock because it's used
...
Tsec keys function always disabled host1x clock after running.
This interferes with display interface and disables further window frame syncing.
Display_end code already handles disable and reset of said clock.
It also fixes an ancient bug that was mitigated by removing the 5 frame sync on HOST1X_SYNC_SYNCPT_9 at channel 0:
5fd9daa364 (diff-6b0c56eab8515465d559ff0ea73a22c3L152)
2019-09-11 02:19:41 +03:00
CTCaer
4c09454bca
nyx options: Do not hide delay time if AutoBoot is off
2019-09-10 23:53:45 +03:00
CTCaer
29b86ce92b
nyx: Refactor Options to a separate object
2019-09-10 23:35:17 +03:00
Kostas Missos
50ebcee45d
nyx: Fix stray color tags (lvgl heap corruption)
2019-09-10 17:05:52 +03:00
Kostas Missos
718e502983
Add more register names + refactoring
2019-09-09 16:56:37 +03:00
Kostas Missos
c1e072986d
Fix build issues
2019-09-09 15:48:49 +03:00
CTCaer
8045d7992b
hwinit: FIx CPU/GPU on warmboot reboot from Linux
...
Thanks @Stary2001 for all the testing!
2019-09-01 03:55:43 +03:00
CTCaer
02826dd9a6
sdmmc: Streamline power cycle wait for Sandisks U1
2019-08-28 02:39:43 +03:00
CTCaer
c50e61f961
nyx: Support fixing archive bits for emuMMC
2019-08-28 02:27:13 +03:00
CTCaer
deb9c94bcd
nyx: Check if split restore files are 4MB aligned
...
This is a mitigation for cluster version of FastFS.
During a split restore, it is allowed only once to write a cluster that is not full.
2019-08-28 02:25:48 +03:00
CTCaer
6cc3d9df67
nyx: Fix eMMC split restore when < 10 parts
...
Now it properly follows the double digit scheme.
(rawnand.bin.##)
2019-08-28 02:23:46 +03:00
CTCaer
92a60a1e89
nyx: Various fixes
2019-08-28 02:20:48 +03:00
CTCaer
f3d071ca69
mem: Remove memalign
...
It doesn't do what it should anyway.
2019-08-28 02:08:12 +03:00
CTCaer
9533dea124
nyx: Update AutoRCM status on eMMC restore
2019-08-28 02:06:19 +03:00
CTCaer
6159d94e5d
nyx: Fix autoboot list for inis
2019-08-28 01:58:12 +03:00
CTCaer
f622d57f6b
utils: Fix ms timer accuracy
...
Additionally add BPMP delay timers for future use.
2019-08-28 01:33:38 +03:00
CTCaer
3472e7e7fb
Various bugfixes
2019-08-28 01:08:57 +03:00
Guillem Orellana Trullols
03130ad900
Setting minerva periodic training task ready
...
System status bar is not yet declared at this point, so the task that should be flagged as ready is minerva periodic training.
2019-08-19 15:27:30 +02:00
ctcaer@gmail.com
9b80ec9ac7
[emuMMC] Improve change logic
...
It can now properly show the existing sd parition emuMMC
2019-07-06 22:42:59 +03:00
ctcaer@gmail.com
ac425368e4
[emuMMC] Improve migrate logic
...
It can now find more existing emuMMC
2019-07-06 22:42:01 +03:00
ctcaer@gmail.com
205dab6cbd
[Nyx] Add power options when sd card removed
...
Additionally disable screenshot function.
2019-07-06 22:40:39 +03:00
ctcaer@gmail.com
ac7eb092d5
[emuMMC] Change partition type to xE0
2019-07-06 22:39:44 +03:00
ctcaer@gmail.com
fed15a2f2f
[Nyx] Add init of temperature sensor
2019-07-06 22:36:35 +03:00
ctcaer@gmail.com
2bb0dba724
[Nyx] Add button to force HOS boot screen logs
2019-07-06 22:34:03 +03:00
ctcaer@gmail.com
5b919cb12e
[Touch] Fix touch hang for some SoC revisions
...
Fixes the hang on Nyx boot.
2019-07-06 22:24:03 +03:00
ctcaer@gmail.com
138da26a9a
[BPMP] Fix cache coherency issues
...
+ Fix framebuffer memfetcher for some SoC revisions.
2019-07-06 22:22:47 +03:00
ctcaer@gmail.com
08b84384a6
Bugfixes and cleanup
2019-07-06 22:08:37 +03:00
ctcaer@gmail.com
e6d1a31045
[Nyx] Fix icon loading for payload entries
...
+ Add missing resources
2019-06-30 06:12:31 +03:00
ctcaer@gmail.com
c41f98039c
[Nyx] Introducing hekate GUI, named Nyx!
...
Version 0.8.0.
Expect dragons!
2019-06-30 04:03:00 +03:00