CTCaer
e89b7f12dd
nyx: Update hekate theme
2020-04-30 03:57:10 +03:00
CTCaer
279b67fa49
i2c: Update driver in hekate main also
2020-04-30 03:54:24 +03:00
CTCaer
11f1f65ed1
rtc: Fix hour parsing
2020-04-30 03:53:29 +03:00
CTCaer
071dfa9792
lvgl: Enable keyboard and add HEX mode
2020-04-30 03:53:04 +03:00
CTCaer
3cecb03dac
nyx: Fix a long standing heap corruption issue
2020-04-30 03:51:13 +03:00
CTCaer
a7c64f8ba2
lvgl: Better heap alignment
2020-04-30 03:49:40 +03:00
CTCaer
6749dad1a4
lvgl: Fix HSV to RGB calculation
2020-04-30 03:49:10 +03:00
CTCaer
91b4c86bbe
minerva: Fix emc table corruption
2020-04-30 03:47:23 +03:00
CTCaer
aadb88eeea
regulators: Enable 5V to missing GPIO AO IO rails
2020-04-30 03:46:21 +03:00
CTCaer
2c4d6552e9
Fixes to battery charger and fuel gauge ICs
2020-04-30 03:45:19 +03:00
CTCaer
c2e8d51115
hos: Add EKS
2020-04-30 03:43:29 +03:00
CTCaer
1d69809022
sdram: Allow killing ram clock source if desired
2020-04-30 03:39:18 +03:00
CTCaer
093f14923c
sdram: Document cfg and use vendor patches
2020-04-30 03:37:40 +03:00
CTCaer
63768ccc99
uart: Add rounded clocking for 1 mbaud
2020-04-30 03:34:05 +03:00
CTCaer
a00f25d2f9
l4t: Clear payload mode from scratch0 reg
2020-04-30 03:31:42 +03:00
CTCaer
54faa38920
utils: Add normal CRC32
2020-04-30 03:30:51 +03:00
CTCaer
ae1bb909b6
se: Add prng128 generator and get aes keys
2020-04-30 03:29:05 +03:00
CTCaer
ecb616e411
sdram: Add MR read request
2020-04-30 03:27:39 +03:00
CTCaer
8c762c52e2
Various fixes and whitespace removal
2020-04-30 03:25:22 +03:00
CTCaer
e14a7d1d4d
nyx: Clear partition start when creating emuMMC
2020-04-30 02:05:24 +03:00
CTCaer
08c81fe1f8
Move verification config to nyx config
2020-04-30 02:00:33 +03:00
CTCaer
63be93be64
nyx: Use a static color for verifying bar indicator
2020-04-30 01:35:18 +03:00
CTCaer
de4891e133
nyx: Correct label styles set
2020-04-30 01:33:14 +03:00
CTCaer
8fd398f213
nyx: Fix heap corruption while parsing emmc gpt
2020-04-30 01:31:01 +03:00
CTCaer
ec53aa86dd
emmc: Use gpt struct and only add valid entries
...
Additionally keep track of partition index
2020-04-30 01:29:58 +03:00
CTCaer
51985ed2ca
sdmmc v2: Bus/IO clock refactoring and fixes
...
Use the exact same clocks with HOS and utilize low jitter clock parents.
Add back our compatibility mode and the missing timeout clock parent.
Hekate main will continue to use PLLP clock parent for all.
2020-04-30 01:26:55 +03:00
CTCaer
67ae7b9dcb
nyx: Add SD Card error report in Console Info
2020-04-30 01:09:48 +03:00
CTCaer
96654d9620
nyx: Throw a warning if SD Card in 1 bit mode
2020-04-30 01:05:22 +03:00
CTCaer
ce97b97c8d
sdmmc v2: Add full SD card fallback initialization
...
hekate main always runs in compatibility mode (SDR82).
This ensures speed on boot process.
Nyx will first try SDR104.
If the sd card is a sandisk U1 and fails, it will try the compatibility mode.
After that it fallbacks to lower bus speeds.
Both support 1bit mode for broken sd card readers.
Having the new error checking in the sdmmc driver, allows for all that to work.
It can now fail instead of continuing, like how HOS reacts.
2020-04-30 00:00:00 +03:00
CTCaer
034f680a8e
sd fs: Move sd init/mount/helpers to their own object
2020-04-29 23:20:18 +03:00
CTCaer
7d17e34dee
sdmmc v2: Add eMMC overclocking
2020-04-29 22:11:23 +03:00
CTCaer
d0a16a49b6
sdmmc v2: Add error checking for all cases
2020-04-29 22:09:36 +03:00
CTCaer
5442547a59
sdmmc v2: Name eMMC physical partitions
2020-04-29 22:06:33 +03:00
CTCaer
10e7e06048
sdmmc v2: Move address alignment check in driver
2020-04-29 21:46:25 +03:00
CTCaer
eac6426125
sdmmc v2: Driver fixes
2020-04-29 21:43:07 +03:00
CTCaer
88b01994bd
sdmmc v2: HW driver fixes
2020-04-29 21:39:03 +03:00
CTCaer
66780bb4c2
sdmmc v2: Refactor and fix registers
2020-04-29 21:23:28 +03:00
CTCaer
7f26981fa1
sdmmc v2: Refactor function names and vars
2020-04-29 21:16:44 +03:00
CTCaer
5b0a0070c7
sdmmc v2: Refactor everything
2020-04-29 18:53:29 +03:00
CTCaer
0462f3b252
Add simple exception handling
...
This adds support for exception handling.
It should provide simple and fast reporting of crucial info and full restoration without powering off.
2020-04-27 09:56:19 +03:00
CTCaer
9a5cfdff4c
gpio: Upgrade GPIO driver
...
Use macros to get bank addresses and add full configuration support.
2020-04-27 09:51:25 +03:00
CTCaer
cb3b1bf6e1
irq: Add Legacy Interrupt Controller driver
2020-04-27 09:49:00 +03:00
CTCaer
b4d2df8111
Name various t210 registers
2020-04-27 09:47:47 +03:00
CTCaer
cadb95e3ce
hos: Add emummcforce key
...
This disallows booting if emummc.ini is missing or emuMMC is disabled. Useful when sysmmc must be avoided at all cases.
2020-04-27 09:44:06 +03:00
CTCaer
f148757110
hos: Disallow booting CFW if normal FS and exFAT sd
...
This will stop black screens when user boots CFW with an exFAT sd card and without having the exFAT microupdate.
2020-04-27 09:41:13 +03:00
CTCaer
6e538cd291
hos: Improve kip patching
...
Allows more kip names to be added. To use it on them you will need to dump the kips via the Dump pkg1/2 function and then sha256 to get the hash.
The name must be used as is, otherwise the name compare will fail.
Because of that, also allow unordered parsing and gluing.
2020-04-27 09:38:09 +03:00
CTCaer
62a73ee612
ini: Always clear the section allocations
2020-04-27 09:33:21 +03:00
CTCaer
4160037c81
emummc: Add boot entry emuMMC selection
...
Using the key `emupath` on a boot entry will load the selected emuMMC.
This can also be forced by using the correct boot cfg storage bit and writing the path at the emummc path offset. Check readme for these.
This can only be used if the emuMMC was created via Nyx. because of the raw_based and file_based files that have emuMMC info.
(emupath=emuMMC/RAW1, emupath=emuMMC/SD00, etc)
2020-04-27 09:30:53 +03:00
CTCaer
3fa537e54a
nyx: Move emummc cfg load function
2020-04-27 09:18:31 +03:00
CTCaer
f35c18a0c2
nyx: Refresh emuMMC status after a creation
2020-04-27 09:13:22 +03:00
