Tomasz Moń
804a40830e
Fix race conditions and misconfiguration in sdmmc
...
Properly configure pull up and pull down offsets for autocal.
Run autocal prior to every transfer.
Prevent race conditions in sdmmc_wait_for_event() - make sure the fault
handler has highest priority, then the target irq, state conditions and
finally the error mask.
Do not clear all bits (|=) when acknowledging fault conditions,
only acknowledge the fault conditions itself.
Enable interrupts before preparing command registers - if sdmmc is fast
enough it can actually finish transfer before we enabled the interrupts.
Enabling interrupts clears the COMMAND COMPLETE status bit.
Temporarily print all the sdmmc messages in stage2 - for yet unknown
reason respecting the log level results in some failures.
This results in working microsd card in stage2 on my switch with Samsung
EVO+ 256GB microsd card.
2018-06-09 17:37:53 +02:00
Tomasz Moń
7b9dcd2f1a
Make sdmmc autocalibration follow TRM procedure
...
Sleep for 1 us, not 1 ms.
Timeout after 10 ms, set driver strength code values according to TRM.
Fix typo (mS) - time is in milliseconds, not milliSiemens.
2018-06-05 19:07:14 +02:00
TuxSH
0491a21a99
Fix logic bug in stage2's main function
2018-06-05 16:18:02 +02:00
Max K
6b7da2887f
package2 verification and ini1 merging fixes ( #125 )
...
* fusee: Incremet offset while reading kip1s
* fusee: Pass package2 section data along with the decrypted metadata
2018-06-04 14:04:44 -07:00
TuxSH
b2139ed182
Pass screen status and mmc struct from stage1 to 2
2018-06-04 19:17:23 +02:00
hexkyz
7e5fda86b2
Merge pull request #114 from desowin/sdmmc-errata
...
Set SDMMC controller to SDR104 as a workaround
2018-06-04 16:20:19 +01:00
langerhans
41429e9120
fusee: Add kernel hash for 4.x
2018-06-03 16:59:21 +02:00
Michael Scire
968c86578a
Fusee: Add 5.x kernel patches to allow for IPC PID mitm.
2018-06-02 20:01:44 -06:00
Michael Scire
cc69079d73
Fusee: Add mechanism for branching back at end of hook.
2018-06-02 19:11:50 -06:00
Max K
8ec3a53d73
Fix CCPLEX bringup and halt the BPMP once it's done booting. ( #118 )
2018-06-02 17:24:02 -07:00
Michael Scire
b3a7086b7e
Fusee: Add infrastructure for applying kernel patches (needed for mitm)
2018-06-02 16:06:31 -06:00
Michael Scire
1ba8a92030
Fusee: Separate kernel patching into its own file.
2018-06-02 16:06:31 -06:00
Tomasz Moń
0534e36cf8
Set SDMMC controller to SDR104 as a workaround
...
According to Tegra X1 Series Processors Silicon Errata there is possible
misalignment of received data which results in a CRC error. The issue is
present only in SDR50 mode.
2018-05-27 17:43:25 +02:00
TuxSH
c9723d7b68
Refactor fusee's makefile
2018-05-27 00:59:02 +02:00
TuxSH
d57f4c54a9
Fix mmc->allow_voltage_switching assignment in sdmmc_init
2018-05-24 17:39:36 +02:00
TuxSH
4d43a86b60
Copy latest sdmmc driver to stage2
2018-05-24 01:17:13 +02:00
TuxSH
fd77e5543e
Add debug comment for exosphère
2018-05-23 18:46:39 +02:00
TuxSH
16ad355f45
Unstub "Validate section hashes."
2018-05-23 18:45:53 +02:00
Kate J. Temkin
eaf8e559d6
fusee: work around some dual-init SDMMC issues
2018-05-23 07:47:02 -06:00
TuxSH
a4b1cf8b50
Stage1: fix SE issue too
2018-05-21 21:18:30 +02:00
Michael Scire
c64d7904b4
Fusee: Fix se_calculate_sha256
2018-05-21 13:07:46 -06:00
TuxSH
561fa90669
Use uintX_t for the SE & copy bugfixed SE struct definition
2018-05-21 19:05:00 +02:00
TuxSH
f39622c421
Stage2: Fix bug, add more debug printfs to nxboot. The CCPLEX doesn't turn on
2018-05-21 18:42:42 +02:00
TuxSH
5920f5a4b0
Stage2: fix various bugs in package2.c
2018-05-21 18:18:12 +02:00
TuxSH
ffd0b5df6a
Fix bug in stratosphere_get_ini1, etc.
2018-05-21 17:45:05 +02:00
TuxSH
0e9a304533
stage2: package2: bypass hash checks for now
2018-05-21 17:42:10 +02:00
TuxSH
ecb83903c0
Stage1: fix potential alignment issue
2018-05-21 14:18:03 +02:00
Kate J. Temkin
ac7ee45493
fusee: improve SDR104 frequency and support AUTOCMD23
2018-05-21 04:24:50 -06:00
TuxSH
bf2c6dff25
Stage2: Add exception handlers
2018-05-21 03:50:53 +02:00
TuxSH
c1687905a3
Fix stack overflow when chainloading stage2
2018-05-21 03:42:05 +02:00
TuxSH
ea2693dd2d
Fix exception handlers (thanks @fincs)
2018-05-21 03:39:18 +02:00
TuxSH
43d1816ac2
[stage1] Add exception handlers... which somehow don't work?
2018-05-21 02:24:41 +02:00
TuxSH
83d9d874e6
Fusee use CAR reboot for fatal errors
2018-05-20 23:52:09 +02:00
TuxSH
4ec7d0fc82
Remove packed when not needed
2018-05-20 22:57:25 +02:00
TuxSH
57ff5e694a
Don't check for panics in stage2
2018-05-20 22:00:11 +02:00
TuxSH
3dd6ec5f6c
wtf pmc reboot doesn't fully work -- display doesn't reinitialize
2018-05-20 16:56:15 +02:00
TuxSH
f45bc83bc4
Introduce fatal_error
2018-05-20 16:18:48 +02:00
Kate J. Temkin
add03d5774
fusee: correct computation of tuning block size
2018-05-20 07:21:49 -06:00
Kate J. Temkin
d5411b5b1f
fusee: begin adding support for MMC HS modes
2018-05-20 07:05:35 -06:00
Kate J. Temkin
5f3fc8156c
fusee: SD: implement tuning, allowing for all SD UHS-I speed
2018-05-20 07:05:35 -06:00
Kate J. Temkin
38350e769c
fusee: SD driver: implement everything necessary for UHS except tuning
2018-05-20 07:05:35 -06:00
Kate J. Temkin
633c5e95ed
fusee: correct constants in CAR
2018-05-20 07:05:35 -06:00
Kate J. Temkin
817c42efc2
fusee: handle SDMMC speeds sanely
2018-05-20 07:05:35 -06:00
TuxSH
ec7e0d923d
Add custom panic driver
2018-05-20 14:11:46 +02:00
TuxSH
c820375a86
Make struct tegra_pmc not packed
2018-05-20 01:40:23 +02:00
TuxSH
64cdd2e63f
Actually don't use memcpy in sdmmc
2018-05-19 03:10:06 +02:00
TuxSH
2a98e2e3b8
Sync sdmmc changes between stage1 and 2
2018-05-19 02:50:50 +02:00
TuxSH
2bc2fe1452
Use memcpy instead of raw casts in sdmmc.c
2018-05-19 01:33:07 +02:00
TuxSH
b4eeddd7e1
Revamp all the Makefiles (thanks @fincs @WinterMute)
...
... dependencies are now properly handled (e.g. header changes, etc.)
2018-05-19 01:07:27 +02:00
Kate J. Temkin
7bfdf63a71
fusee sdmmc: don't time out on long reads
2018-05-18 07:43:09 -06:00
