Commit graph

98 commits

Author SHA1 Message Date
CTCaer
f3802ec464 lists: Fix list member iteration with no entries 2020-03-03 04:24:38 +02:00
CTCaer
bc7a7bcfa0 info: Allow dumping of battery characterization table 2020-03-03 04:22:59 +02:00
CTCaer
6a52d44da6 heap: Fix edge case of reusing first node
There is an edge case fixed where the whole would be freed and this would make use of a nullptr.

Additionally, remove usage of reserved names for vars and add comments on how it works.
2020-03-03 04:16:20 +02:00
CTCaer
03a8a11933 Small fixes and changes
- Allow printing of more log on HOS boot when LOGS are OFF.
- A small name refactoring
- Add battery warning symbol when battery < 3200mV
2020-03-03 04:11:13 +02:00
CTCaer
4c1f67d022 Fix build errors 2020-01-19 15:22:59 +02:00
CTCaer
2a161b572b sdmmc: Set power cycle wait to 0 at boot 2020-01-17 09:19:58 +02:00
CTCaer
422852795f ini: Remove \r stripping as is done by FatFS 2020-01-17 09:18:31 +02:00
CTCaer
4d53f21387 mtc: Clear init magic on chainload
Fixes a hang caused when rebooting 2 payload from L4T with old hekate in vendor partition.

L4T does not overwrite the nyx storage where the Minerva configuration is stored.
This makes new Minerva parse the wrong tables from old hekate and eventually hang the RAM, which causes an exception on BPMP.
2020-01-14 23:41:15 +02:00
CTCaer
9263e2192f nyx: Fix low battery voltage color 2020-01-07 06:50:33 +02:00
CTCaer
c99a87dd09 clock: Move PLLC config from bpmp.c to clock.c 2020-01-07 06:46:22 +02:00
CTCaer
009db77426 bpmp: Switch to PLLC for SCLK/BPMP clock source 2020-01-07 06:26:29 +02:00
CTCaer
2f43145131 uart: Add invert, get/set IIR and fifo empty functions 2019-12-16 22:16:40 +02:00
CTCaer
e3fca2bce5 uart: Add timeout and len report to uart receive 2019-12-16 22:15:21 +02:00
CTCaer
da112a0ae9 uart: Proper uart init 2019-12-16 22:12:09 +02:00
CTCaer
90060d1d83 mtc: Don't rely on clean BSS for Minerva lib 2019-12-16 22:06:13 +02:00
CTCaer
1ccce5f1a2 gfx: Fix off-by-one in right half of 16px rendering 2019-12-16 21:49:54 +02:00
CTCaer
2aaa0331ac rtc: Add epoch convertion functions
Thanks @shchmue for the HOS conversion
2019-12-14 22:27:07 +02:00
CTCaer
7604239237 bpmp: Update driver to latest 2019-12-14 22:21:42 +02:00
CTCaer
1e4d63731b nyx: Fix about screen 2nd pane left margin 2019-12-12 00:20:14 +02:00
CTCaer
a664118fc7 r2p: Update r2p payload
2 modes:
- With updater2p; Forces the reboot to payload binary to be hekate
- Without; Checks if hekate and then if old
2019-12-12 00:13:32 +02:00
CTCaer
c6e92311f9 Add error printing for issues with libraries
It will now show erros for the following:
- Missing or old libsys_minerva.bso (DRAM training).
- Missing libsys_lp0.bso (LP0 sleep mode).
- Missing or old Nyx version
2019-12-11 11:22:11 +02:00
CTCaer
24d30a40f9 hos: Add Atmosphere's system mem increase patches 2019-12-10 19:20:02 +02:00
CTCaer
e4f7928513 minerva: Fix compatibility check for hekate main
Init now also returns status.
2019-12-09 22:27:01 +02:00
CTCaer
bd8a5ece58 heap: Fix type for heap monitor memset size 2019-12-09 19:30:45 +02:00
CTCaer
d0850516ab Bump hekate to v5.1.0 and Nyx to v0.8.3 2019-12-08 18:59:00 +02:00
CTCaer
4c5a78de6f hos: Fix pkg2 keygen with newer sept
This change also adds support for older sept binaries.
2019-12-08 18:32:09 +02:00
CTCaer
c12c696e53 hos: Add 9.1.0 support 2019-12-08 03:01:21 +02:00
CTCaer
f256bd5909 Move all I/DRAM addresses into a memory map
Many addresses were moved around to pack the memory usage!
2019-12-08 02:23:03 +02:00
CTCaer
0290892b23 nyx hw reconfig: Add fan and 5V regulators deinit
Additionally re-arrange minerva and mmu after these.
2019-12-08 01:41:57 +02:00
CTCaer
643a8ea8f9 fan: Update driver
Make use of 5V regulator driver and fixe some bugs
2019-12-08 01:38:12 +02:00
CTCaer
a6d8854499 power: Add 5V regulator driver 2019-12-08 01:36:35 +02:00
CTCaer
96bafd8bd7 nyx: Use color when battery voltage < 3200mV
For status bar and Battery Info.
2019-12-08 01:32:26 +02:00
CTCaer
65ee728939 nyx: Enable fan when temps are high 2019-12-08 01:26:26 +02:00
CTCaer
e1748a0727 nyx: Boost eMMC backup/restore verification times
This change allows SE to start verifying the first buffer while the 2nd is populated. Effectively cutting verification down to almost half.
2019-12-08 01:20:05 +02:00
CTCaer
35e853fd03 touch: Change I2C4 pinmuxing as per HOS 2019-12-07 23:23:01 +02:00
CTCaer
7e26be6587 lvgl: Optimize color blending
The manual optimization done dramatically increases performance in software color blending.
Isolated gains reach 20-30%.

Color blending calculates 2 +1 color channels instead of the expensive 1+1+1 calculations.

This is as best as it gets without going in asm optimizations.
2019-12-07 20:47:19 +02:00
CTCaer
733da0f4d5 nyx: Remove compiler flags to gain extra perf
- Removing no-inline produces 30-50% performance gains on specific real time sensitive functions used for rendering.
On overall, this will give 5-10% observed performance gains.

- Strict aliasing produces some extra small gains.
2019-12-07 20:35:17 +02:00
Kostas Missos
a357395cc6 nyx: Remove LTO in order to increase performance
Perf gains from removing LTO linker flag amounts to actually more than 5% average in real usage scenarios in Nyx.
(These include overall timings with static waits included. So basically as observed by user.)

Gains observed, on many isolated cases, were between 15-35%.

Additionally, this will make compiling fast again.
2019-12-07 20:26:51 +02:00
Kostas Missos
48c15a8fde nyx: Release the shackles 2019-12-07 20:16:38 +02:00
Kostas Missos
0b45a5a11a bpmp: Reduce freq to 589MHz
3 users had issues with 602MHz.
This will probably bring the SoC binning compatibility to 100%.

Additionally, make it easy to change default boost frequency.

The tiny loss in perf, will be mitigated in Nyx. (It's actually even faster)
2019-12-07 02:01:29 +02:00
Kostas Missos
bc7dec2e61 bpmp: Add forcable maintenance
+ Fix build issues
2019-12-07 01:47:44 +02:00
CTCaer
9811ba53e0 pmic: Enable Low Battery Shutdown for 2.8V
There's an increasing ammount of users that kill their batteries when forgetting their devices into AutoRCM / RCM mode.

This will now force a shutdown the moment the battery reaches 2.8V. Even if device is inside RCM mode.

Notice: We might need to increase the limit.
2019-12-04 22:06:34 +02:00
CTCaer
a16b1af698 pmic: Always ensure that values were written 2019-12-04 22:02:17 +02:00
CTCaer
641a57a4f6 hos/mtc: Add FSP WAR and boost HOS booting times
By implementing FSP WAR we can allow HOS to boot in 1600MHz and be able to switch frequency without hanging.
2019-12-04 21:59:58 +02:00
CTCaer
84328aa676 minerva: Make use of new minerva
- Training and switch is now faster
- Compatibility checks: New Minerva does not allow old binaries. New binaries do not allow old Minerva
- MTC table is now in a safe region
- Periodic training period increased to every 250ms
2019-12-04 21:56:45 +02:00
CTCaer
dd8ec0d28b clock: Always wait 2us before deasserting reset 2019-12-04 21:32:51 +02:00
CTCaer
0b1eebefe1 Small refactor and bugfixes 2019-12-04 21:31:39 +02:00
CTCaer
168de9ddd8 sdmmc: Ensure aligned DMA buffers 2019-12-04 19:42:25 +02:00
CTCaer
b61b212218 lvgl heap: Align addresses & sizes to cache line size 2019-12-04 19:04:11 +02:00
CTCaer
ec10b572d1 heap: Quality updates to heap management
- Allow reuse of unused sections that fit exactly to selected allocation size. Decreases fragmentation dramatically.
- Always allocate and align mapped memory to selected alignment. Avoids having fragmented unused maps that are not aligned.
- Use a static alignment based on BPMP and generally average cache line size. Boosts performance when MMU is used.
2019-12-04 19:02:28 +02:00