CTCaer
0215d16405
Bump hekate to v6.0.4 and Nyx to v1.5.4
2023-06-09 11:08:13 +03:00
CTCaer
66e5e128f6
l4t: adjust revision amidst the new changes
...
Also add helpful message if files are missing.
2023-06-09 10:56:39 +03:00
CTCaer
84822726cb
l4t: add fine tuned voltage support for DRAM
...
1000-1175mV for T210 VDDIO/Q via `ram_oc_vdd2`
1000-1175mV for T210B01 VDDIO and 600-650mV for VDDQ via `ram_oc_vdd2` and `ram_oc_vddq`.
2023-06-09 10:55:32 +03:00
CTCaer
b6e1e0d412
l4t: add bpmp-fw support for T210
2023-06-09 10:53:03 +03:00
CTCaer
496737248c
l4t: there was never a need to normalize dram freq
2023-06-09 10:51:31 +03:00
CTCaer
4f52e1f24a
l4t: refactor bpmp-fw defines for T210B01
2023-06-09 10:50:29 +03:00
CTCaer
3f9c7a7da6
hos: prep boot freq in minerva for cfw also
2023-06-09 10:41:53 +03:00
CTCaer
937ab52d14
Bump hekate to v6.0.4
2023-05-09 11:15:34 +03:00
CTCaer
e896d388ab
hos: 16.0.3 support
2023-05-09 11:15:11 +03:00
CTCaer
ded959c449
Bump hekate to v6.0.3 and Nyx to v1.5.3
2023-04-06 17:38:36 +03:00
CTCaer
dd380d4d47
l4t: increase bw priority to SDMMC1 for L4T
2023-04-06 17:34:26 +03:00
CTCaer
ca0263fa8c
hekate: info: fully deinit/unmount sd card
2023-03-31 09:17:51 +03:00
CTCaer
b1112e0949
hos: set proper exo hos version for 12.1.0
...
Even if 12.0.0 one is api compatible, there was a master key change on 12.1.0.
2023-03-31 09:17:13 +03:00
CTCaer
3c3fcb29f9
hekate: clear rtc interrupt and stop alarm
...
Stopping rtc alarm is now done in the function that actually checks it, in order to avoid power offs from HOS if it's fired and user wants to continue booting.
Additionally, clear the interrupt which is the actual thing that is checked by HOS.
2023-03-31 09:15:56 +03:00
CTCaer
5bdf323e5c
Bump hekate to v6.0.2 and Nyx to v1.5.2
2023-02-23 01:25:19 +02:00
CTCaer
2e8bfc1f56
hos: add 16.0.0 support
2023-02-22 13:45:46 +02:00
CTCaer
7f92f65c26
fatfs/nyx: set minimum year to 2023
2023-02-22 13:23:40 +02:00
CTCaer
a44a4881d4
hekate/nyx: stylistic and copyright updates
2023-02-22 13:04:42 +02:00
CTCaer
64dac28073
hekate: allow accessing launch options without ini
2023-02-11 23:52:43 +02:00
CTCaer
5193416658
hekate/nyx: stylistic corrections
2023-02-11 23:51:43 +02:00
CTCaer
361aaf8629
l4t: disable AHB aperture and pllc war
...
We don't need AHB aperture after that point and new deinit fixes the pllc init issue on L4T boot.
2023-02-11 23:25:22 +02:00
CTCaer
080e3e2aa7
hos: disable AHB aperture before secmon launch
...
Seems that old secmon were missing that and it may cause bad behavior on boot.
Only affects stock old secmon versions.
2023-02-11 23:22:53 +02:00
CTCaer
f9e99212fc
Bump hekate to v6.0.1 and Nyx to v1.5.1
2022-12-22 12:39:51 +02:00
CTCaer
1666daf447
l4t: fix several issues
...
- Fixed an issue where cached data would not be flushed after setting the fw carveout. Now they are flushed before setting it.
- Fixed and off-by-one bug and setting incorrect number of mtc entries.
2022-12-22 12:37:56 +02:00
CTCaer
47784faab2
Bump hekate to v6.0.0 and Nyx to v1.5.0
2022-12-20 17:01:42 +02:00
CTCaer
a2a302b9d5
l4t: Add L4T loader for T210 and T210B01
2022-12-20 17:00:33 +02:00
CTCaer
20915dd661
hekate: blink 3 times on OLED for auto hos pwr off
...
The OLED panel does not allow for variable PWM fade without sending DCS commands, so blink instead.
2022-12-19 06:03:53 +02:00
CTCaer
f49aecad19
hekate: update to ini_check_special_section
2022-12-19 05:43:48 +02:00
CTCaer
2e989c2338
hekate: increase battery enough limits
2022-12-19 05:35:45 +02:00
CTCaer
2119401b5c
hekate: add T210B01 R2P
2022-12-19 05:31:35 +02:00
CTCaer
f16159542c
hekate/nyx: slight refactor
2022-12-19 05:04:50 +02:00
CTCaer
227fe9b7ea
cfg: remove creation from hekate and move to Nyx
...
There's no reason for hekate to create the hekate config if missing, since Nyx is the sole manager of it.
So move the auto creation there to save binary space.
2022-12-19 04:41:21 +02:00
CTCaer
c86554e954
Cleanup for years unused code
...
Compiler was also getting confused and actually not removing the unused functions.
So that also saves binary space.
2022-12-19 04:27:38 +02:00
CTCaer
1bef259571
Bump hekate to v5.9.0 and Nyx to v1.4.0
2022-10-12 12:31:31 +03:00
CTCaer
7e7e86b713
hos: add HOS 15.0.0 support
2022-10-11 10:29:41 +03:00
CTCaer
a6d0bf54cd
hos: improve warmboot config
...
Add more checks, simplify it and allow it to be called on non-HOS code.
2022-10-11 08:53:46 +03:00
CTCaer
31c8292f23
config: set default auto hos power off to enabled for T210B01
...
For new users, set Auto HOS Power Off feature to enabled if T210B01 based SoC.
2022-10-11 07:51:45 +03:00
CTCaer
414721a1ff
bootloader: Add animated ticker for VOL- wait
...
Now an animated line is drawn while bootlogo wait is active.
This will remind user to press VOL- if needed and also give visible feedback.
A new config key was added to disable it for custom bootlogos. Set `noticker=1` in `[config]` section.
It always show for default hekate one.
For now now there's no GUI option for it.
2022-10-11 07:49:17 +03:00
CTCaer
c0b16320cc
bootloader: improve launch code
...
- Fix error not showing if payload is missing or can't be read
- Move errors to their callee function to save binary space
- Refactor various parameters and comments
- Reduce size on some errors
- Do not read HOS specific config in case of payload launch
- Remove unneeded code
2022-10-11 07:21:41 +03:00
CTCaer
e7866387cd
bootloader: remove volatile from reloc
...
To save binary space, as it's not needed.
2022-10-11 07:00:24 +03:00
CTCaer
6739f03893
bootloader: remove rtc stop alarm from auto hos powerr off
...
It's done in power_set_state anyway.
2022-10-11 06:59:39 +03:00
CTCaer
0a9c71d5d6
bootloader: simplify emmcsn_path_impl
2022-10-11 06:58:22 +03:00
CTCaer
5392971c2c
hekate/nyx: utilize emmc_end
2022-10-11 04:19:29 +03:00
CTCaer
1499f958dd
Bump hekate to v5.8.0 and Nyx to v1.3.0
2022-07-01 13:47:47 +03:00
CTCaer
fe7fd6370e
hekate/nyx: push some missed changes
2022-07-01 11:33:43 +03:00
CTCaer
535ea95086
hekate/nyx: gfx: add text color defines
...
And reduce code size when using W/EPRINTF macros
2022-07-01 04:37:57 +03:00
CTCaer
eba6b285ec
hekate: utilize watchdog to catch sd based hangs
...
Utilize watchdog when configuring LP0/Minerva.
A problematic SD card connector can cause corrupted reads to happen and thus cause hekate to hang on a black screen.
By using a watchdog there, such issues can be avoided and the user can get notified visually.
2022-06-29 12:19:19 +03:00
CTCaer
3fa01a1975
hekate: fix a bug in low battery monitor
...
Do not try to deinit display if it's not enabled.
Can happen if LBM disables display to reserve power while charging and user presses both VOL buttons to exit the mode.
2022-06-04 22:03:47 +03:00
CTCaer
10205b17dd
hekate: remove sd mount/unmout management for payload launch
...
Callers manage it anyway.
Fixes a case where missing the payload would result to Nyx not relaunching because sd was unmount.
2022-05-21 13:10:12 +03:00
CTCaer
75b7d91abf
hekate: always init sublist on section creation
...
Even if there are no edge cases here
2022-05-21 13:08:46 +03:00
CTCaer
8428ce1a2e
hekate/nyx: gfx: changes to putn
2022-05-19 15:06:37 +03:00
CTCaer
334d89973f
hekate/nyx: adhere to uart driver changes
2022-05-08 05:46:23 +03:00
CTCaer
c2869703af
hekate: gfx: add negative decimals printing
...
And remove external handling
2022-05-08 05:29:30 +03:00
CTCaer
8f540b2543
Bump hekate to v5.7.2 and Nyx to v1.2.2
2022-03-23 19:34:59 +02:00
CTCaer
f687c4f6da
hos: add support for HOS 14.0.0
2022-03-23 02:21:59 +02:00
CTCaer
547c90a0a9
hekate: remove ipatches info from main hekate
2022-03-23 00:24:13 +02:00
CTCaer
cfd6567f5d
pkg1: move warmboot rsa patching into pkg1
...
And create a function for hekatf to be used
2022-02-15 00:26:07 +02:00
CTCaer
9aa55c2d76
hekate/nyx: correct type on heap_init
2022-02-15 00:23:23 +02:00
CTCaer
ad4014f295
hekate: sd info: always reset mode after done
2022-02-15 00:18:24 +02:00
CTCaer
73d38e1183
hos: loop through counter instead of explicit sets
2022-02-15 00:16:42 +02:00
CTCaer
70ee61f0da
More 2022 copyright updates
2022-01-29 01:43:35 +02:00
CTCaer
ce16a08694
main: check pstore log size if 0
2022-01-29 01:37:02 +02:00
CTCaer
0ad42762e7
main: rename logo buffer
2022-01-29 01:36:35 +02:00
CTCaer
5f337bffd6
config: do not unmount on exit
...
Fixes Nyx not found for new users without hekate_ipl.ini
2022-01-29 01:35:09 +02:00
CTCaer
aee5861f65
hekate/nyx: improve cyclomatic complexity
2022-01-29 01:23:40 +02:00
CTCaer
2f1d1572f7
Bump hekate to v5.7.0 and Nyx to v1.2.0
2022-01-20 14:34:54 +02:00
CTCaer
49f34581bb
hos: add 13.2.1 support
2022-01-20 14:06:50 +02:00
CTCaer
17b0270eb5
hekate: move display init above others that need it
2022-01-20 13:57:25 +02:00
CTCaer
39ce19e6f4
hekate: remove unnecessary sd mounts
...
- Main already mounts sd. Also by trying again it takes forever to go into TUI
- Skip l4t kernel pstore dump and auto launch fw if sd failed to mount
2022-01-20 13:56:36 +02:00
CTCaer
b18b5076b3
hos: change order of deinits and update for newer exo
2022-01-20 13:49:29 +02:00
CTCaer
6ac9d79282
pkg2: do not hash kernel/ini1 if exo
2022-01-20 13:34:18 +02:00
CTCaer
836530d4e3
pkg2: refactor bitflags and remove debugging code
2022-01-20 13:32:48 +02:00
CTCaer
3b2f438f69
pkg2: ini patches: reduce heap fragmentation/pressure
2022-01-20 13:31:16 +02:00
CTCaer
28167b7304
hekate/nyx: move emmc ops to bdk and adhere to changes
2022-01-20 13:15:04 +02:00
CTCaer
943f675046
hekate/main: move sd ops into bdk
2022-01-20 12:49:18 +02:00
CTCaer
06e7af150e
hekate/nyx: improve exceptions reporting
...
- Do not report HOS panic if status is 0
- Do not report LP0/MTC libs missing if failed to mount sd
- Rename panics to be explicit of their source
2022-01-16 01:33:07 +02:00
CTCaer
864ec50a2d
main: add L4T kernel panic report back
...
L4T kernel now uses a PANIC magic flag instead of a bitflag and so it's simpler to detect.
2022-01-16 01:23:39 +02:00
CTCaer
aa0a9da37b
fatfs: default year to 2022
2022-01-16 01:09:45 +02:00
CTCaer
30a4861da6
exo: change BOOT2 error message
2022-01-16 01:08:56 +02:00
CTCaer
5894062b93
hekate/nyx: utilize bdk global header
2022-01-16 00:04:34 +02:00
CTCaer
01b6e645b3
Bump hekate to v5.6.5 and Nyx to v1.1.1
2021-10-26 11:39:53 +03:00
CTCaer
db8c41cdaa
hos: pkg2: add 13.1.0 support
2021-10-26 11:39:32 +03:00
CTCaer
c6fdb637ca
Bump hekate to v5.6.4 and Nyx to v1.1.0
2021-10-19 09:16:49 +03:00
CTCaer
d2684f66a1
hos: change exfat check order
2021-10-19 09:11:36 +03:00
CTCaer
a7f0701cbf
hos: move storage end above final touches
2021-10-15 16:47:06 +03:00
CTCaer
65b3b87c99
hos: pkg1: explicitly which type pkg1 is wrongly flashed
2021-10-15 16:42:39 +03:00
CTCaer
8d3700b76b
hos: improve error for missing BEK or corrupt pkg1 on T210B01
2021-10-15 16:40:06 +03:00
CTCaer
d2595a00b6
nyx: move autorcm protection in nyx
2021-10-15 16:34:15 +03:00
CTCaer
c4bf129d5e
hos: name pkg1/secmon states
2021-10-15 16:30:14 +03:00
CTCaer
503f4d4cd6
tui: tools: simplify autorcm warning
2021-10-15 16:26:57 +03:00
CTCaer
9c29ee437a
Bump hekate to v5.6.3 and Nyx to v1.0.8
2021-10-01 15:54:49 +03:00
CTCaer
785baad5ea
hos: exo: better fatal description for boot2
2021-10-01 15:46:38 +03:00
CTCaer
91b08f10fd
hekate/nyx: use size defines where applicable
2021-10-01 15:45:25 +03:00
CTCaer
b47c01981f
hekate: add OS panic error reporting
2021-10-01 14:35:39 +03:00
CTCaer
05ce867064
hekate: move emummc config load inside relevant functions
...
This ensures that hekate can re-read it in case of sd card swap while in TUI and also doesn't read it if not needed.
2021-09-26 12:23:54 +03:00
CTCaer
0160df7fb9
Bump hekate to v5.6.2
2021-09-20 11:45:58 +03:00
CTCaer
05c989a1ce
emummc: correct id size and also set id if emupath is used
...
This corrects a truncation that was happening and also if `emupath` key is used to change emuMMC on the fly, it now uses the path as id instead of 0.
2021-09-20 11:41:48 +03:00
CTCaer
ebefd1c2d3
Bump hekate to v5.6.1 and Nyx to v1.0.7
2021-09-19 22:35:56 +03:00
CTCaer
d61be73bca
nyx: add reminder that reload also checks for update.bin
2021-09-17 23:34:16 +03:00
CTCaer
768b3ba2d9
hos: update some log messages
2021-09-17 23:32:48 +03:00