CTCaer
9de5a4ba66
nyx: Swap tab for Partition Manager and Dump Pkg1/2
2021-02-06 04:07:28 +02:00
CTCaer
84e437ae5b
nyx: Explicitly state status in Joycon BT dumping
2021-02-06 04:06:09 +02:00
CTCaer
9e34c5995d
bis: Pull latest lockpick driver and refactor it
...
- Refactor various variables and functions
- Flush whole cache when full
- Allow cache to be disabled
- Add support for raw emuMMC in nyx contenxt
- Use partition names for keys (to avoid issues with different ordering)
- Add deinit function that flushes the whole cache
- Change bis lookup address
- Halve cache size to 256MB in order to support 512MB ramdisk also.
Co-Authored-By: shchmue <7903403+shchmue@users.noreply.github.com>
2021-02-06 04:05:31 +02:00
CTCaer
eea5463a5c
nyx: Refactor nyx extra cfg
2021-02-06 03:55:01 +02:00
CTCaer
af790aeaf8
nyx: Beef up eMMC/SD benchmark
...
- Added 4KB sequential and random tests that shows IOPS and rate
- The test is now faster as it does 1GB raw reads and 512GB for random reads
- Still does 3 iterations in order to cover both nands that most eMMCs and SDs have.
2021-02-06 03:51:26 +02:00
CTCaer
a8a45b215a
nyx: Add emmc info about write cache and enhanced area
2021-02-06 03:44:27 +02:00
CTCaer
38f456a2ee
sdmmc: Refactor again
...
- Refactor various variables and defines
- Removed Card/BGA and OEM ID info as they are static and useless
- Commented out bkops functions completely as not used
- Remove extra buf usage when there's already storage for storing that data
- Optimize various functions to save space
- Clean up useless or duplicate code
2021-02-06 03:41:35 +02:00
CTCaer
ea83566fc9
sept: Disallow sept if improper BCT to avoid black screen
2021-02-06 03:24:58 +02:00
CTCaer
8cd438146d
sdmmc: Use global emmc storage in various places
2021-02-06 03:19:42 +02:00
CTCaer
abcf7f6f57
nyx: Allow reboot to OFW for patched units
...
- OFW: This bypasses fuses like always and does not cause a SYS Reset.
- Normal: Resets regulators and causes a SYS Reset.
2021-01-11 22:18:36 +02:00
CTCaer
d1f0ea3de7
Formalize language in various messages
2021-01-11 21:39:44 +02:00
CTCaer
dbc8f4a4c2
nyx: Fix an underflow on Android UDA partition
2021-01-11 21:32:35 +02:00
CTCaer
c6c396ce2a
reg5V: Manage battery source based on charger status
2021-01-11 21:30:59 +02:00
CTCaer
74b91b0085
nyx: Cover edge case on backup/restore checks for partition manager
...
An edge was fixed where the checks for if it's possible to backup files for partition manager would overflow and end up with a value < 1GB and thus proceeding to the backup/restore process.
2021-01-10 02:09:03 +02:00
CTCaer
53c9ca8072
nyx: Fix nyx hanging when updating the partition buttons
2021-01-06 21:29:18 +02:00
CTCaer
147ccd3070
nyx: Add Main/CPU/GPU pmic info.
2021-01-05 17:12:03 +02:00
CTCaer
dc5c26e7c6
nyx: Change fuse dumping names for T210B01 again
...
Use offsets in names for making it easier to parse.
2021-01-05 15:52:34 +02:00
CTCaer
4914af1200
nyx: Allow selection of emuMMC migration type
2021-01-05 15:44:35 +02:00
CTCaer
b57d26e99a
nyx: Add nyx options save reminder
2021-01-05 15:41:27 +02:00
CTCaer
9daa14abec
ums: Dim backlight and change the maintenance order
2021-01-04 20:12:26 +02:00
CTCaer
46921aca22
Disable battery management on dev units
2021-01-04 02:58:07 +02:00
CTCaer
41f96d4305
hos: Utilize burnt fuse info instead of keyblob
...
Streamline identification of HOS version quirks
2021-01-04 02:57:07 +02:00
CTCaer
0959dc3a2d
nyx: Add touch panel info
...
This can probably also show if the panel is paired to the firmware.
In case it's not, an error will show up.
2021-01-04 02:49:07 +02:00
CTCaer
31baf3d19a
nyx: Rearrange hw info a bit
2021-01-04 02:47:08 +02:00
CTCaer
f4696da0ef
sdram: Update names for Aula
2021-01-04 02:45:32 +02:00
CTCaer
1a9372b4ce
nyx: Add MSC partition for L4T Android
2021-01-03 14:52:13 +02:00
CTCaer
87b91174ec
nyx: Disable Flash Linux/Android buttons if partitions not found
2021-01-03 14:51:48 +02:00
CTCaer
26fff275ce
nyx: Remove L4T joycon driver mitigation
...
Seems that this was fixed long ago
2021-01-03 14:46:42 +02:00
CTCaer
53b44a525d
Refactor emmcsn_path_impl and return serial number if needed
...
The refactoring also makes consecutive requests instantaneous.
2021-01-03 14:45:06 +02:00
CTCaer
faaf801534
nyx: Add metadata copy in partitioning and extra warns
2020-12-28 05:34:01 +02:00
CTCaer
3fa775e3ad
nyx: Add burnt fuses - HOS pair info
...
Additionally add raw value info for ODM fuses 4, 6 and 7.
2020-12-28 05:32:23 +02:00
CTCaer
6663330de3
nyx: Split T210B01 fuse dumping for better readability
2020-12-28 05:30:34 +02:00
CTCaer
ed916360eb
display: Add new panel revision
2020-12-28 05:24:42 +02:00
CTCaer
60b629e57f
Move display related objects to display parrent
2020-12-28 05:19:23 +02:00
CTCaer
a85891ae00
Refactor AutoRCM tools
2020-12-26 16:38:21 +02:00
CTCaer
2628044ba8
fuse: Move more parsing into its specific object
2020-12-26 16:34:12 +02:00
CTCaer
52c65661d8
Improve Power off by resetting all regulators
2020-12-15 19:37:52 +02:00
CTCaer
601c85c23e
util: Refactor power management (reboot/power off)
2020-12-15 19:33:46 +02:00
CTCaer
14a048a496
nyx: Add SD init info from bootloader
...
This shows info about the sd initialization process that happened on hekate main
2020-12-11 17:46:44 +02:00
CTCaer
fce59fba43
nyx: Add SD card AU info
2020-12-11 17:41:09 +02:00
CTCaer
b8eff953c6
nyx: Utilize full shutdown based reboot for patched Erista also
2020-12-02 22:27:22 +02:00
CTCaer
cf1f94662c
sdram: Correct some dram names
2020-12-02 22:26:06 +02:00
CTCaer
2aa1ce5390
nyx: Add eMMC and SD vendor id decoding into names
2020-12-02 02:11:22 +02:00
CTCaer
cf175fc00d
nyx: Add alternate power saving modes
...
T210:
By default max power savings is enabled.
By changing `newpowersave=` to 0, it reverts to the old behavior of smaller power savings.
This was added to mitigate some strange DRAM chips, hanging from constant frequency change of a 800 MHz - 1600 MHz back and forth.
T210B01:
Defaults to a simple loop with no power savings. That's because of untrained ram.
2020-12-02 02:07:31 +02:00
CTCaer
0954eb2b09
nyx: Use full shutdown based reboot on T210B01
...
That's because of how the system is exploited.
2020-12-02 01:45:12 +02:00
CTCaer
f9a1935762
nyx: Fix Dump pkg1/pkg2 and cal0 for Mariko
2020-07-04 21:36:04 +03:00
CTCaer
9b3e9724b7
hos: Add Mariko PK11 decryption and unpacking
2020-07-04 21:32:36 +03:00
CTCaer
7acad84932
nyx: Disable TSEC keys status for T210B01
2020-07-04 21:04:57 +03:00
CTCaer
8d2230dc51
fuse: Correct fuse array size for T210B01
2020-07-04 21:04:20 +03:00
CTCaer
e4c0756ded
nyx: Add DRAM names info + Mariko new ram codes
2020-06-26 22:41:34 +03:00
CTCaer
1c9efa327c
Correct RCM patched status for Mariko
...
This also disallows AutoRCM for Mariko.
2020-06-26 22:40:06 +03:00
CTCaer
cabaa6cfb8
Utilize BIT macro everywhere
2020-11-26 01:41:45 +02:00
CTCaer
55568b037f
nyx: Properly calculate Ranks and Channels in hw info
2020-11-15 13:50:19 +02:00
CTCaer
b5df428e43
nyx: Create bootloader folder on screenshots if missing
2020-11-15 13:47:47 +02:00
CTCaer
32955380c7
nyx: Fix icons for backup/restore swap
2020-11-15 13:40:53 +02:00
CTCaer
485edb4883
emc: Rename Device to Rank
2020-11-15 13:23:37 +02:00
CTCaer
8f222fd0bd
main: Fix update.bin creation on first boot
2020-10-27 21:27:51 +02:00
CTCaer
94235dd005
bm92t30: Add proper info
...
The driver will now show more charger supported profiles and will also show selected profile.
2020-10-20 10:42:57 +03:00
CTCaer
27b1f0e843
Various small fixes
2020-10-20 10:32:32 +03:00
CTCaer
dae7be8ec4
nyx: Allow disabling of Joycon
...
Setting `jcdisable=1` in nyx.ini disables the usage of Joycon completely.
This also disables the BT pairing data dumping tool.
2020-10-20 10:21:48 +03:00
CTCaer
e3e5dab0fc
nyx: Add USB Charger info
2020-09-15 20:14:56 +03:00
CTCaer
e7900b11b4
nyx: Allow L4T last part to be unaligned
2020-09-02 13:11:03 +03:00
CTCaer
461d14c39a
di: Correct panel id for AUO A062TAN02
2020-08-28 05:26:18 +03:00
CTCaer
3d05b58856
nyx: Add eMMC NAND cells life estimation
2020-08-15 12:33:11 +03:00
CTCaer
78c4e6510d
hos: Add backup bootloader support
2020-08-15 12:30:18 +03:00
CTCaer
cd76d5ac09
nyx: Fix hang on using B button after Launch window
2020-08-15 12:22:01 +03:00
CTCaer
9c2a064817
nyx: Allow SD removal without reloading Nyx
2020-08-15 12:21:25 +03:00
CTCaer
db2da89f69
nyx: Remove delay on JC calibration
...
This does not help with drifting as the logged values are always changing drastically.
2020-08-15 12:19:43 +03:00
CTCaer
5140992a7b
nyx: Add proper info about SD write protect
2020-07-19 20:56:08 +03:00
CTCaer
adfa7c0780
fuse: Use fuse count function for burnt fuses
2020-07-18 01:15:28 +03:00
CTCaer
32e58d2bb3
hw init: Cosmetic refactoring
2020-07-17 18:08:27 +03:00
CTCaer
638a3909c5
Refactor various variables and names
2020-07-17 18:00:32 +03:00
CTCaer
3c2d86ef7b
sdmmc: Add protected area info (Content Protection)
2020-07-17 17:01:40 +03:00
CTCaer
f559017aeb
di: Update display panels and info
2020-07-17 16:57:45 +03:00
CTCaer
3ddd1c26ad
pkg1: Fix PK11 component split in pkg1/2 dump tool
2020-07-14 23:29:48 +03:00
CTCaer
1f67251331
nyx: Use strcat whenever possible
2020-07-14 22:26:40 +03:00
CTCaer
4eecdfa553
nyx: Add decrypted CAL0 dumping
2020-07-14 21:16:52 +03:00
CTCaer
80dd0f1580
joycon: Skip first 4 packets for calibration
2020-07-14 21:13:37 +03:00
CTCaer
4e0c70a402
nyx: Do not timeout joycon with screenshot
...
Additionally, screenshots are allowed only every 2s instead per second.
2020-07-14 21:12:09 +03:00
CTCaer
3214fc2f93
nyx: Fix validation check for emuMMC restore
...
When checking a partition for enough size for emuMMC restore, always check against the extra 16MB.
2020-06-18 01:23:06 +03:00
CTCaer
3b0925b912
touch: Check if init failed and stop parsing if yes
2020-06-17 00:41:37 +03:00
CTCaer
6159284be6
nyx: Check for huge files in part manager backup
2020-06-15 15:05:47 +03:00
CTCaer
9afc6f0a4e
joycon: Add bigger deadzone for virtual mouse
2020-06-15 15:04:46 +03:00
CTCaer
f689bb253e
nyx: Add simple CAL0 info
2020-06-15 15:03:14 +03:00
CTCaer
0738c96867
nyx: Fix pkg1/2 dumping with new changes
2020-06-15 15:01:18 +03:00
CTCaer
2aa9055fae
Various fixes
2020-06-15 14:58:50 +03:00
CTCaer
c73b4ad6ba
nyx: Include Hoag as Mariko in fuses info
2020-06-14 16:51:06 +03:00
CTCaer
6e256d29c7
Utilize hekate's BDK for hekate main and Nyx
2020-06-14 16:45:45 +03:00
CTCaer
5790c585f5
nyx: Reduce idle power draw by 280mW
2020-06-14 13:14:32 +03:00
CTCaer
e2c905e9b2
joycon: More robust spi dumping for bd addr/ltk
2020-06-14 13:13:04 +03:00
CTCaer
9619417b07
nyx: Allow arc bits tool to work on all compat folders
2020-06-14 13:09:10 +03:00
CTCaer
b0bcdeafac
nyx: Find best cluster size automatically
2020-06-14 13:07:42 +03:00
CTCaer
7b76015fd1
nyx: Fix an issue with hos partition initial size
2020-06-14 13:07:21 +03:00
CTCaer
465955c8f5
nyx: Use sd actual size for partition making
2020-06-14 13:06:43 +03:00
CTCaer
0096b91146
Add corrupted bmp protection
2020-06-14 13:04:13 +03:00
CTCaer
125f000894
nyx: Use date/time for screenshot names
...
Now that RTC clock can be offset in software it's good to have actual dates on screenshots.
2020-06-14 13:02:54 +03:00
CTCaer
f9a0e6ce4f
nyx: Show clock edit on boot if 0 offset
2020-06-14 13:00:55 +03:00
CTCaer
0d5a1416d0
nyx: Show SD card total blocks in info
2020-06-14 12:59:41 +03:00
CTCaer
43f3132069
nyx: Do not show SFD partitions as valid for emuMMC
2020-06-14 12:53:35 +03:00
CTCaer
3d00a1be21
nyx: Support multiple backup based emuMMC
2020-06-14 12:52:54 +03:00