Commit graph

1038 commits

Author SHA1 Message Date
CTCaer
4914ce1d49 usb: add more timeout control for ep1 read/write finish 2021-08-28 17:00:23 +03:00
CTCaer
70a06a6cae sdram: add support for missing new dram ids
In preparation of dram chip shortages, add missing new ids that are now confirmed that they will be in mass usage
2021-08-28 16:56:49 +03:00
CTCaer
5044f014bf mc: move ahb aperture size control inside enable function 2021-08-28 16:51:16 +03:00
CTCaer
7c72c9777a fuse/hwinit: move automatic SBK set into fuse 2021-08-28 16:46:15 +03:00
CTCaer
73df5e6743 fuse: add nx aula hw type 2021-08-28 16:44:16 +03:00
CTCaer
9cf0b0f484 tsec: change kb to type
Now the path taken is decided by tsec fw type instead of mkey version
2021-08-28 16:42:03 +03:00
CTCaer
9541d1bbd3 se: add encrypt/decrypt defines 2021-08-28 16:40:29 +03:00
CTCaer
3e15eb44ab touch: rename 4th panel so it's not confused with errors 2021-08-28 16:39:38 +03:00
CTCaer
bf89d9b841 display: Add Aula panel support 2021-08-28 16:38:42 +03:00
CTCaer
d8995ee9c0 hekate: clean unused stuff
Remove anything that will never be in TUI in the future.
Especially these that need modernization.
2021-08-22 16:56:05 +03:00
CTCaer
42f86cf82c Bump hekate to v5.5.8 and Nyx to v1.0.5 2021-07-06 20:02:23 +03:00
CTCaer
a704679990 nyx: add sandisk device report for eMMC mods 2021-07-06 19:51:00 +03:00
CTCaer
5876e1765d nyx: hos: support BIS for 12.1.0 keygen devices 2021-07-06 19:49:15 +03:00
CTCaer
dcdf687a07 sdmmc: add support for sandisk emmc device report 2021-07-06 10:15:59 +03:00
CTCaer
e94bd23d6f nyx: info: add missing old touch fw version 2021-07-06 10:10:17 +03:00
CTCaer
cd5b93feb1 nyx: tools: improve error messaging when restore folder is empty 2021-07-06 10:09:06 +03:00
CTCaer
f231173ebe fss: remove deprecated check 2021-07-06 10:06:49 +03:00
CTCaer
561a96c62a hos: small refactoring 2021-07-06 10:05:37 +03:00
CTCaer
57e6623d74 hos: 12.1.0 support 2021-07-06 10:02:52 +03:00
CTCaer
57623acc99 Bump hekate to v5.5.7 and Nyx to v1.0.4 2021-06-08 06:06:26 +03:00
CTCaer
4f8d29d0b7 pkg2: Add HOS 12.0.3 support
In 12.0.3 only FS is the relevant change.

So add support for 12.0.3 emuMMC and NOGC
2021-06-08 06:05:12 +03:00
CTCaer
8eda2d805f nyx: explicitly state if fuses are overburnt 2021-06-08 05:57:39 +03:00
CTCaer
432d4a4ffa Use bit_count for burnt fuses counting 2021-06-08 05:57:00 +03:00
CTCaer
539caf3d83 utils: add bit count and bit count mask 2021-06-08 05:53:58 +03:00
CTCaer
ce6926c36c fuse: remove fuse counting, bit count will be used instead 2021-06-08 05:53:31 +03:00
CTCaer
8058d550ab nyx: reflect 5v regulator changes 2021-06-08 05:51:52 +03:00
CTCaer
9a21ff6976 regulator 5v: don't enable usb one by default 2021-06-08 05:51:21 +03:00
CTCaer
1f4f41b6e6 als: Update ambient light sensor driver to use integers
Additionally separate calibration so later Aula one can be used
2021-06-08 05:49:16 +03:00
CTCaer
a959196c2a Add info about usb3force key in readme
Additionally explain what atmosphere config keys can affect hekate boot configuration externally when the equivalent ones are missing from hekate config.
2021-06-03 03:25:51 +03:00
CTCaer
3f22601022 Bump hekate to v5.5.6 and Nyx to v1.0.3 2021-05-12 12:55:03 +03:00
CTCaer
a80a7ecba9 hos: nogc detection support for 12.0.2
12.0.2 burnt a fuse so we can now automatically detect if NoGC is needed for LAFW v5
2021-05-12 12:04:46 +03:00
CTCaer
7c450f4a5f hos: 12.0.2 support 2021-05-12 11:47:39 +03:00
CTCaer
6316d3076d nyx: fix restore logic when backup does not match emmc
- If sd backup size exceeds eMMC size, bail out.
- If partial files backup is smaller allow restoring in case user has an eMMC upgrade.
 Following the same behavior that single file backup has when it's smaller.
2021-05-12 11:47:25 +03:00
CTCaer
7181683d8e ums: various fixes
- Immediately exit if offset exceeds num of sectors.
- Correct cmnd type and checks.
- Inform user if ejected unsafely (while medium removal prevention is enabled).
2021-05-11 10:45:17 +03:00
CTCaer
7d7134dd9e utils: correct align down 2021-05-11 10:34:10 +03:00
CTCaer
c29db97f73 hwinit/joycon: move uart clock deinits to joycon driver 2021-05-11 10:24:48 +03:00
CTCaer
05833bb38c minerva: update to v1.4
- Correct Zqlatch period checks
- Update periodic training
- Simplify some logic
- Fix some mr13 values
- Separate EMC channel enums from macros
- Add extra reg flushes
- Fix tree margin comparison signedness
 By using incorrect signedness on tree margins the delta taps would always apply.
 By casting margins to integer it now properly checks if it should apply delta taps on the new trimmers.
 This fixes a bug that exists in every Nvidia emc dvfs code.
2021-05-11 10:23:08 +03:00
CTCaer
253de81a6b Further reduce hekate size by streamlining about screen 2021-05-11 10:11:31 +03:00
CTCaer
21e6a0cf7e pkg1: reduce struct sizes 2021-05-11 10:08:43 +03:00
CTCaer
d0fefabad7 nyx: return unknown if SD vendor is not known
TODO: Investigate which OEM/ODM makes the new Lexar SD cards.
2021-05-11 10:07:08 +03:00
CTCaer
44db160ab1 nyx: add info about new InnoLux panel revision 2021-05-11 10:04:31 +03:00
CTCaer
cb633a8f32 display: add info about new InnoLux panel revision 2021-05-11 10:04:24 +03:00
CTCaer
66b7130641 nyx: align total sectors to guarantee alignment
Helps on some sd cards with weird total sectors number.
2021-05-11 09:57:29 +03:00
CTCaer
80d9718770 GCC 11 fixes
The array/stringop warning removals are undesirable.
Consider removing them when a new GCC version moves back to saner checks for pointers.
2021-05-11 09:51:08 +03:00
CTCaer
dfbbca4c9f pkg2: isolate kernel/kip patches structs from code 2021-05-11 09:45:12 +03:00
CTCaer
f4d08b2d9b pkg2: refactor defines for kernel patches 2021-05-11 09:38:20 +03:00
CTCaer
588a834ae4 nyx: allow backing up resized emummc 2021-05-11 09:34:19 +03:00
CTCaer
833dda7e7c nyx: bpmp: automatically find best clock for t210
There were 4 reports of Nyx hanging or UMS and backup verification failing because of low binned Erista SoC.

This change reduces clock for hekate main and Nyx will now automatically try and find a working one.
In case Nyx hangs it will reduce it on next inject.

If Nyx works and user still has issues with UMS/Verification, manually editing nyx.ini and setting `bpmpclock=2` will fix that.
2021-05-11 09:32:38 +03:00
CTCaer
6a4ab55930 storage: add sd_get_card_mounted declaration 2021-05-11 09:22:39 +03:00
CTCaer
d7ce2a81db bpmp: return previous fid when setting a new one 2021-05-11 09:21:12 +03:00