nold/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate synced 2024-12-22 11:21:23 +00:00
Code Issues Projects Releases Packages Wiki Activity
1649 commits 2 branches 75 tags 7 MiB
Commit graph

135 commits

Author SHA1 Message Date
CTCaer
39c614a3ab bdk: hwinit: move sd2 to hw init 
SD2 powers LDO0/1/8 on T210B01 so there's no need to be in display init.
Also there's not need to power it down first so configure it in one go.
 2024-06-05 01:33:15 +03:00
CTCaer
bd55a3e756 bdk: clock: always set DISPA source 
No need to distinguish between LP or HS.
Setting the same value doesn't glitch.
 2024-06-02 08:00:42 +03:00
CTCaer
b01cc2432f bdk: irq: remove ack source 
HW interrupts can't be managed by FIR.
Only actual hw can clear the interrupt.
 2024-06-02 07:46:18 +03:00
CTCaer
05db43a97c bdk: hwinit: move down debug uart init 2024-06-02 07:44:22 +03:00
CTCaer
9d79af231e bdk: use static where it should 2024-06-02 07:09:34 +03:00
CTCaer
7a74761da9 bdk: bpmp: add and use bpmp_clk_rate_relaxed 2024-06-02 06:51:06 +03:00
CTCaer
927489d2da bdk: add missed defines 2024-05-19 10:50:25 +03:00
CTCaer
ae29f359ee bdk: hwinit: rename reinit_workaround to deinit 2024-05-19 10:49:25 +03:00
CTCaer
985c513770 bdk: hwinit: add arbiter config 2024-05-19 10:07:06 +03:00
CTCaer
ec2e62236a bdk: pinmux: add i2s pin config 2024-04-25 04:52:13 +03:00
CTCaer
9ba7c44b89 bdk: clock: use real source clock dividers 
Use CLK_SRC_DIV macro in order to have the actual divider showing.
 2024-03-13 02:01:01 +02:00
CTCaer
9a520d63a6 bdk: smmu: refactor driver and allow other asid 2024-03-13 01:54:46 +02:00
CTCaer
20e661fc01 bdk: refactor flow control defines 2024-03-13 01:50:45 +02:00
CTCaer
fb31cb2926 bdk: ccplex: add no rst vector lock & powergating 
Allow not locking the reset vectors and launch a new payload after powergating ccplex.
 2024-03-13 01:37:52 +02:00
CTCaer
b584a3f53a bdk: add several defines 2023-12-25 04:08:34 +02:00
CTCaer
7f98fb736a bdk: hwinit: reorder sdmmc1 reg disable 2023-12-25 04:07:26 +02:00
CTCaer
87c50732c0 bdk: fuse: simplify idle wait 2023-12-25 03:47:26 +02:00
CTCaer
504659a39b bdk: actmon: switch to averaged sampling 2023-12-25 03:46:05 +02:00
CTCaer
ce137852b7 bdk: change some defines and comments 2023-10-12 06:59:15 +03:00
CTCaer
f2bdc3f47c bdk: i2c: fix stack buffer overflow 2023-08-07 21:02:20 +03:00
CTCaer
1e28320e5a bdk: t210: add more mmio addresses 
And simplify relevant drivers that hardcoded them.
 2023-07-31 16:59:15 +03:00
CTCaer
9187fa7a8c bdk: fuse: add all t210b01 fuses 
And use B01 to distinguish the ones only on that SoC.
 2023-07-22 07:10:12 +03:00
CTCaer
b674624ad0 bdk: timer: add instruction sleep 
usage:
`isleep(ILOOP(instructions))`

Each loop is 3 cycles, or approximately 7.35ns on 408MHz CPU clock.
 2023-06-09 10:33:11 +03:00
CTCaer
191a0533d9 bdk: clock: add more known pto ids 2023-06-09 10:29:47 +03:00
CTCaer
8502731fbd bdk: tsec: refactor some register names 2023-06-09 10:28:28 +03:00
CTCaer
c2ee6be2f5 bdk: sdram: add Samsung 8GB RAM support for T210 
And remove Copper support completely.
 2023-06-08 04:16:51 +03:00
CTCaer
27ae312227 bdk: minor naming edits 2023-03-31 09:11:55 +03:00
CTCaer
d258c82d52 bdk: sdmmc: add UHS DDR200 support 
The bdk flag BDK_SDMMC_UHS_DDR200_SUPPORT can be used to enable it.

SD Card DDR200 (DDR208) support

Proper procedure:
1. Check that Vendor Specific Command System is supported.
   Used as Enable DDR200 Bus.
2. Enable DDR200 bus mode via setting 14 to Group 2 via CMD6.
   Access Mode group is left to default 0 (SDR12).
3. Setup clock to 200 or 208 MHz.
4. Set host to DDR bus mode that supports such high clocks.
   Some hosts have special mode, others use DDR50 and others HS400.
5. Execute Tuning.

The true validation that this value in Group 2 activates it, is that DDR50 bus
and clocks/timings work fully after that point.

On Tegra X1, that can be done with DDR50 host mode.
Tuning though can't be done automatically on any DDR mode.
So it needs to be done manually and selected tap will be applied from the
biggest sampling window.

Finally, all that simply works, because the marketing materials for DDR200 are
basically overstatements to sell the feature. DDR200 is simply SDR104 in DDR mode,
so sampling on rising and falling edge and with variable output data window.
It can be supported by any host that is fast enough to support DDR at 200/208MHz
and can do hw/sw tuning for finding the proper sampling window in that mode.

Using a SDMMC controller on DDR200 mode at 400MHz, has latency allowance implications. The MC/EMC must be clocked enough to be able to serve the requests in time (512B in 1.28 ns).
 2023-03-31 08:54:13 +03:00
CTCaer
76a5facbc3 bdk: clock: rename clock_t to clk_rst_t 
To avoid redefines when standard math header is used.
 2023-03-31 08:18:45 +03:00
CTCaer
502fc1ed50 bdk: sdmmc: rename ddr100 to the actual HS100 name 2023-03-31 08:15:40 +03:00
CTCaer
107fbd1d24 bdk: gpio: add debounce set function 
The debounce time is not per pin but per bank. So software should manage proper time for sibling pins
 2023-03-31 07:43:16 +03:00
CTCaer
1edb6583ac bdk: gpio: reorder gpio config 
Since there are some bootloaders that mess with the states of some power gpios, reorder gpio configuration for input/output in order to prevent power pin glitches.
 2023-03-31 07:41:50 +03:00
CTCaer
17cdd5af0d bdk: hwdeinit: restore order of bpmp clock set 
Restore order of bpmp clock scale down in deinit, in order to decrease pressure on clock deinits.
 2023-02-22 14:48:43 +02:00
CTCaer
9a98c1afb9 bdk: stylistic corrections 
And update copyrights
 2023-02-11 23:46:38 +02:00
CTCaer
72abe60a3b bdk: hw init: remove support for broken hwinits 
It's 2023 already.
 2023-02-11 23:19:56 +02:00
CTCaer
114abba815 bdk: hw init: do not touch audio clocks on t210b01 2023-02-11 23:13:41 +02:00
CTCaer
ec8c04db8a bdk: bpmp: add 563MHz clock for worst binnings 2023-02-11 23:12:14 +02:00
CTCaer
4d7eb6a647 bdk: clock: improve pllc deinit 2023-02-11 23:11:24 +02:00
CTCaer
5bb9a244ea bdk: utilize new gpio functions 2023-02-11 23:08:32 +02:00
CTCaer
05b5e4f297 bdk: gpio: add simple gpio direction functions 2023-02-11 22:55:22 +02:00
CTCaer
0e1eece04f bdk: hw-init: remove charger forced enable 
Anything that doesn't manage it properly should fix itself.
(Like for example disabling charging on sleep or something. They should use the gpio equivalent.)
 2022-12-19 05:35:04 +02:00
CTCaer
4d823d5909 bdk: slight refactor 2022-12-19 05:22:55 +02:00
CTCaer
d0b22bf374 bdk: manage host1x only in hw init 2022-12-19 05:14:39 +02:00
CTCaer
fe0bd89c4c bdk: pmc: extend pmc scratch locker 2022-10-11 14:41:42 +03:00
CTCaer
f534d5e316 bdk: i2c: fix send packet mode 2022-10-11 14:40:58 +03:00
CTCaer
2ea595e98d bdk: sdram: add new dram ids/configs 
On T210B01 dram ids 7 and 16 got removed.
29 to 34 were added.

Additionally, remove all deprecated and unused dram id enums.
 2022-10-11 10:38:43 +03:00
CTCaer
9d889e2c3e bdk: Add driver for VIC 
VIC is a HW engine that allows for frame/texture buffer manipulation.
 2022-10-11 06:41:38 +03:00
CTCaer
bfad719fcd bdk: small refactor 2022-10-11 06:16:38 +03:00
CTCaer
197ce4c76f bdk: sdmmc: timing changes 
- Correct HS102 naming to DDR100
- Fix clock for DDR50 (even if it's unused)
 2022-10-11 04:05:12 +03:00
CTCaer
d259d6f6d6 bdk: watchdog: clear timer interrupt also in handling 2022-07-11 22:10:41 +03:00