mirror of
https://github.com/CTCaer/hekate
synced 2024-12-22 11:21:23 +00:00
bdk: di: refractor configs
This commit is contained in:
CTCaer
parent
0b8cdaf0ea
commit
dd2bb0f555
4 changed files with 200 additions and 160 deletions
103
bdk/display/di.c
103
bdk/display/di.c
|
|
@ -35,8 +35,8 @@
|
|||
|
||||
extern volatile nyx_storage_t *nyx_str;
|
||||
|
||||
static u32 _display_id = 0;
|
||||
static bool nx_aula = false;
|
||||
static u32 _display_id = 0;
|
||||
static bool _nx_aula = false;
|
||||
|
||||
static void _display_panel_and_hw_end(bool no_panel_deinit);
|
||||
|
||||
|
|
@ -362,7 +362,7 @@ void display_dsi_vblank_write(u8 cmd, u32 len, void *data)
|
|||
void display_init()
|
||||
{
|
||||
// Get Hardware type, as it's used in various DI functions.
|
||||
nx_aula = fuse_read_hw_type() == FUSE_NX_HW_TYPE_AULA;
|
||||
_nx_aula = fuse_read_hw_type() == FUSE_NX_HW_TYPE_AULA;
|
||||
|
||||
// Check if display is already initialized.
|
||||
if (CLOCK(CLK_RST_CONTROLLER_CLK_OUT_ENB_L) & BIT(CLK_L_DISP1))
|
||||
|
|
@ -380,7 +380,6 @@ void display_init()
|
|||
// Set slew rate and enable SD2 regulator.
|
||||
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD2_CFG, (1 << MAX77620_SD_SR_SHIFT) | MAX77620_SD_CFG1_FSRADE_SD_ENABLE);
|
||||
max7762x_regulator_enable(REGULATOR_SD2, true);
|
||||
|
||||
}
|
||||
|
||||
// Enable LCD DVDD.
|
||||
|
|
@ -393,7 +392,6 @@ void display_init()
|
|||
// Enable Display Interface specific clocks.
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) = BIT(CLK_H_MIPI_CAL) | BIT(CLK_H_DSI);
|
||||
|
||||
CLOCK(CLK_RST_CONTROLLER_RST_DEV_L_CLR) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
|
||||
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_L_SET) = BIT(CLK_L_HOST1X) | BIT(CLK_L_DISP1);
|
||||
|
||||
|
|
@ -416,7 +414,7 @@ void display_init()
|
|||
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) &= ~PINMUX_TRISTATE; // PULL_DOWN | 1
|
||||
PINMUX_AUX(PINMUX_AUX_LCD_BL_EN) &= ~PINMUX_TRISTATE; // PULL_DOWN
|
||||
|
||||
if (nx_aula)
|
||||
if (_nx_aula)
|
||||
{
|
||||
// Configure LCD RST pin.
|
||||
gpio_config(GPIO_PORT_V, GPIO_PIN_2, GPIO_MODE_GPIO);
|
||||
|
|
@ -468,22 +466,26 @@ void display_init()
|
|||
}
|
||||
|
||||
// Setup Display Interface initial window configuration.
|
||||
exec_cfg((u32 *)DISPLAY_A_BASE, _display_dc_setup_win_config, 94);
|
||||
exec_cfg((u32 *)DISPLAY_A_BASE, _di_dc_setup_win_config, CFG_SIZE(_di_dc_setup_win_config));
|
||||
|
||||
// Setup display communication interfaces.
|
||||
exec_cfg((u32 *)DSI_BASE, _display_dsi_init_config_part1, 8);
|
||||
// Setup dsi init sequence packets.
|
||||
exec_cfg((u32 *)DSI_BASE, _di_dsi_init_irq_pkt_config0, CFG_SIZE(_di_dsi_init_irq_pkt_config0));
|
||||
if (tegra_t210)
|
||||
DSI(_DSIREG(DSI_INIT_SEQ_DATA_15)) = 0;
|
||||
else
|
||||
DSI(_DSIREG(DSI_INIT_SEQ_DATA_15_B01)) = 0;
|
||||
exec_cfg((u32 *)DSI_BASE, _display_dsi_init_config_part2, 14);
|
||||
exec_cfg((u32 *)DSI_BASE, _di_dsi_init_irq_pkt_config1, CFG_SIZE(_di_dsi_init_irq_pkt_config1));
|
||||
|
||||
// Reset pad trimmers for T210B01.
|
||||
if (!tegra_t210)
|
||||
exec_cfg((u32 *)DSI_BASE, _display_dsi_init_config_part3_t210b01, 7);
|
||||
exec_cfg((u32 *)DSI_BASE, _display_dsi_init_config_part4, 10);
|
||||
DSI(_DSIREG(DSI_PHY_TIMING_0)) = tegra_t210 ? 0x6070601 : 0x6070603;
|
||||
exec_cfg((u32 *)DSI_BASE, _display_dsi_init_config_part5, 12);
|
||||
DSI(_DSIREG(DSI_PHY_TIMING_0)) = tegra_t210 ? 0x6070601 : 0x6070603;
|
||||
exec_cfg((u32 *)DSI_BASE, _display_dsi_init_config_part6, 14);
|
||||
exec_cfg((u32 *)DSI_BASE, _di_dsi_init_pads_t210b01, CFG_SIZE(_di_dsi_init_pads_t210b01));
|
||||
|
||||
// Setup init sequence packets and timings.
|
||||
exec_cfg((u32 *)DSI_BASE, _di_dsi_init_timing_pkt_config2, CFG_SIZE(_di_dsi_init_timing_pkt_config2));
|
||||
DSI(_DSIREG(DSI_PHY_TIMING_0)) = tegra_t210 ? 0x6070601 : 0x6070603; // DSI_THSPREPR: 1 : 3.
|
||||
exec_cfg((u32 *)DSI_BASE, _di_dsi_init_timing_pwrctrl_config, CFG_SIZE(_di_dsi_init_timing_pwrctrl_config));
|
||||
DSI(_DSIREG(DSI_PHY_TIMING_0)) = tegra_t210 ? 0x6070601 : 0x6070603; // DSI_THSPREPR: 1 : 3.
|
||||
exec_cfg((u32 *)DSI_BASE, _di_dsi_init_timing_pkt_config3, CFG_SIZE(_di_dsi_init_timing_pkt_config3));
|
||||
usleep(10000);
|
||||
|
||||
// Enable LCD Reset.
|
||||
|
|
@ -491,7 +493,7 @@ void display_init()
|
|||
usleep(60000);
|
||||
|
||||
// Setup DSI device takeover timeout.
|
||||
DSI(_DSIREG(DSI_BTA_TIMING)) = nx_aula ? 0x40103 : 0x50204;
|
||||
DSI(_DSIREG(DSI_BTA_TIMING)) = _nx_aula ? 0x40103 : 0x50204;
|
||||
|
||||
// Get Display ID.
|
||||
_display_id = 0xCCCCCC;
|
||||
|
|
@ -513,7 +515,7 @@ void display_init()
|
|||
_display_id = PANEL_JDI_XXX062M;
|
||||
|
||||
// For Aula ensure that we have a compatible panel id.
|
||||
if (nx_aula && _display_id == 0xCCCC)
|
||||
if (_nx_aula && _display_id == 0xCCCC)
|
||||
_display_id = PANEL_SAM_AMS699VC01;
|
||||
|
||||
// Initialize display panel.
|
||||
|
|
@ -530,7 +532,7 @@ void display_init()
|
|||
break;
|
||||
|
||||
case PANEL_JDI_XXX062M:
|
||||
exec_cfg((u32 *)DSI_BASE, _display_init_config_jdi, 43);
|
||||
exec_cfg((u32 *)DSI_BASE, _di_dsi_panel_init_config_jdi, CFG_SIZE(_di_dsi_panel_init_config_jdi));
|
||||
_display_dsi_send_cmd(MIPI_DSI_DCS_SHORT_WRITE, MIPI_DCS_EXIT_SLEEP_MODE, 180000);
|
||||
break;
|
||||
|
||||
|
|
@ -576,18 +578,21 @@ void display_init()
|
|||
CLOCK(CLK_RST_CONTROLLER_PLLD_MISC1) = 0;
|
||||
CLOCK(CLK_RST_CONTROLLER_PLLD_MISC) = 0x2DFC00; // Use new PLLD_SDM_DIN.
|
||||
|
||||
// Finalize DSI configuration.
|
||||
// Finalize DSI init packet sequence configuration.
|
||||
DSI(_DSIREG(DSI_PAD_CONTROL_1)) = 0;
|
||||
DSI(_DSIREG(DSI_PHY_TIMING_0)) = tegra_t210 ? 0x6070601 : 0x6070603;
|
||||
exec_cfg((u32 *)DSI_BASE, _display_dsi_packet_config, 19);
|
||||
// Set pixel clock dividers: 234 / 3 / 1 = 78 MHz (offset) for 60 Hz.
|
||||
exec_cfg((u32 *)DSI_BASE, _di_dsi_init_seq_pkt_final_config, CFG_SIZE(_di_dsi_init_seq_pkt_final_config));
|
||||
|
||||
// Set 1-by-1 pixel/clock and pixel clock to 234 / 3 = 78 MHz. For 60 Hz refresh rate.
|
||||
DISPLAY_A(_DIREG(DC_DISP_DISP_CLOCK_CONTROL)) = PIXEL_CLK_DIVIDER_PCD1 | SHIFT_CLK_DIVIDER(4); // 4: div3.
|
||||
exec_cfg((u32 *)DSI_BASE, _display_dsi_mode_config, 10);
|
||||
|
||||
// Set DSI mode.
|
||||
exec_cfg((u32 *)DSI_BASE, _di_dsi_mode_config, CFG_SIZE(_di_dsi_mode_config));
|
||||
usleep(10000);
|
||||
|
||||
// Calibrate display communication pads.
|
||||
u32 loops = tegra_t210 ? 1 : 2; // Find out why this is done 2 times on Mariko.
|
||||
exec_cfg((u32 *)MIPI_CAL_BASE, _display_mipi_pad_cal_config, 4);
|
||||
u32 loops = tegra_t210 ? 1 : 2; // Calibrate pads 2 times on T210B01.
|
||||
exec_cfg((u32 *)MIPI_CAL_BASE, _di_mipi_pad_cal_config, CFG_SIZE(_di_mipi_pad_cal_config));
|
||||
for (u32 i = 0; i < loops; i++)
|
||||
{
|
||||
// Set MIPI bias pad config.
|
||||
|
|
@ -597,22 +602,22 @@ void display_init()
|
|||
// Set pad trimmers and set MIPI DSI cal offsets.
|
||||
if (tegra_t210)
|
||||
{
|
||||
exec_cfg((u32 *)DSI_BASE, _display_dsi_pad_cal_config_t210, 4);
|
||||
exec_cfg((u32 *)MIPI_CAL_BASE, _display_mipi_dsi_cal_offsets_config_t210, 4);
|
||||
exec_cfg((u32 *)DSI_BASE, _di_dsi_pad_cal_config_t210, CFG_SIZE(_di_dsi_pad_cal_config_t210));
|
||||
exec_cfg((u32 *)MIPI_CAL_BASE, _di_mipi_dsi_cal_offsets_config_t210, CFG_SIZE(_di_mipi_dsi_cal_offsets_config_t210));
|
||||
}
|
||||
else
|
||||
{
|
||||
exec_cfg((u32 *)DSI_BASE, _display_dsi_pad_cal_config_t210b01, 7);
|
||||
exec_cfg((u32 *)MIPI_CAL_BASE, _display_mipi_dsi_cal_offsets_config_t210b01, 4);
|
||||
exec_cfg((u32 *)DSI_BASE, _di_dsi_pad_cal_config_t210b01, CFG_SIZE(_di_dsi_pad_cal_config_t210b01));
|
||||
exec_cfg((u32 *)MIPI_CAL_BASE, _di_mipi_dsi_cal_offsets_config_t210b01, CFG_SIZE(_di_mipi_dsi_cal_offsets_config_t210b01));
|
||||
}
|
||||
|
||||
// Set the rest of MIPI cal offsets and apply calibration.
|
||||
exec_cfg((u32 *)MIPI_CAL_BASE, _display_mipi_apply_dsi_cal_config, 12);
|
||||
// Reset all MIPI cal offsets and start calibration.
|
||||
exec_cfg((u32 *)MIPI_CAL_BASE, _di_mipi_start_dsi_cal_config, CFG_SIZE(_di_mipi_start_dsi_cal_config));
|
||||
}
|
||||
usleep(10000);
|
||||
|
||||
// Enable video display controller.
|
||||
exec_cfg((u32 *)DISPLAY_A_BASE, _display_video_disp_controller_enable_config, 113);
|
||||
exec_cfg((u32 *)DISPLAY_A_BASE, _di_dc_video_enable_config, CFG_SIZE(_di_dc_video_enable_config));
|
||||
}
|
||||
|
||||
void display_backlight_pwm_init()
|
||||
|
|
@ -703,8 +708,10 @@ static void _display_panel_and_hw_end(bool no_panel_deinit)
|
|||
DSI(_DSIREG(DSI_VIDEO_MODE_CONTROL)) = 0;
|
||||
|
||||
// De-initialize video controller.
|
||||
exec_cfg((u32 *)DISPLAY_A_BASE, _display_video_disp_controller_disable_config, 17);
|
||||
exec_cfg((u32 *)DSI_BASE, _display_dsi_timing_deinit_config, 16);
|
||||
exec_cfg((u32 *)DISPLAY_A_BASE, _di_dc_video_disable_config, CFG_SIZE(_di_dc_video_disable_config));
|
||||
|
||||
// Set timings for lowpower clocks.
|
||||
exec_cfg((u32 *)DSI_BASE, _di_dsi_timing_deinit_config, CFG_SIZE(_di_dsi_timing_deinit_config));
|
||||
|
||||
if (_display_id != PANEL_SAM_AMS699VC01)
|
||||
usleep(10000);
|
||||
|
|
@ -713,11 +720,11 @@ static void _display_panel_and_hw_end(bool no_panel_deinit)
|
|||
switch (_display_id)
|
||||
{
|
||||
case PANEL_JDI_XXX062M:
|
||||
exec_cfg((u32 *)DSI_BASE, _display_deinit_config_jdi, 22);
|
||||
exec_cfg((u32 *)DSI_BASE, _di_dsi_panel_deinit_config_jdi, CFG_SIZE(_di_dsi_panel_deinit_config_jdi));
|
||||
break;
|
||||
|
||||
case PANEL_AUO_A062TAN01:
|
||||
exec_cfg((u32 *)DSI_BASE, _display_deinit_config_auo, 37);
|
||||
exec_cfg((u32 *)DSI_BASE, _di_dsi_panel_deinit_config_auo, CFG_SIZE(_di_dsi_panel_deinit_config_auo));
|
||||
break;
|
||||
|
||||
case PANEL_INL_2J055IA_27A:
|
||||
|
|
@ -766,7 +773,7 @@ skip_panel_deinit:
|
|||
// Disable LCD power pins.
|
||||
gpio_write(GPIO_PORT_V, GPIO_PIN_2, GPIO_LOW); // LCD Reset disable.
|
||||
|
||||
if (!nx_aula) // HOS uses panel id.
|
||||
if (!_nx_aula) // HOS uses panel id.
|
||||
{
|
||||
usleep(10000);
|
||||
gpio_write(GPIO_PORT_I, GPIO_PIN_1, GPIO_LOW); // LCD AVDD -5.4V disable.
|
||||
|
|
@ -788,7 +795,7 @@ skip_panel_deinit:
|
|||
DSI(_DSIREG(DSI_POWER_CONTROL)) = 0;
|
||||
|
||||
// Switch LCD PWM backlight pin to special function mode and enable PWM0 mode.
|
||||
if (!nx_aula)
|
||||
if (!_nx_aula)
|
||||
{
|
||||
gpio_config(GPIO_PORT_V, GPIO_PIN_0, GPIO_MODE_SPIO); // Backlight PWM.
|
||||
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = (PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) & ~PINMUX_TRISTATE) | PINMUX_TRISTATE;
|
||||
|
|
@ -806,7 +813,7 @@ u16 display_get_decoded_panel_id()
|
|||
void display_set_decoded_panel_id(u32 id)
|
||||
{
|
||||
// Get Hardware type, as it's used in various DI functions.
|
||||
nx_aula = fuse_read_hw_type() == FUSE_NX_HW_TYPE_AULA;
|
||||
_nx_aula = fuse_read_hw_type() == FUSE_NX_HW_TYPE_AULA;
|
||||
|
||||
// Decode Display ID.
|
||||
_display_id = ((id >> 8) & 0xFF00) | (id & 0xFF);
|
||||
|
|
@ -815,13 +822,13 @@ void display_set_decoded_panel_id(u32 id)
|
|||
_display_id = PANEL_JDI_XXX062M;
|
||||
|
||||
// For Aula ensure that we have a compatible panel id.
|
||||
if (nx_aula && _display_id == 0xCCCC)
|
||||
if (_nx_aula && _display_id == 0xCCCC)
|
||||
_display_id = PANEL_SAM_AMS699VC01;
|
||||
}
|
||||
|
||||
void display_color_screen(u32 color)
|
||||
{
|
||||
exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_one_color, 8);
|
||||
exec_cfg((u32 *)DISPLAY_A_BASE, _di_win_one_color, CFG_SIZE(_di_win_one_color));
|
||||
|
||||
// Configure display to show single color.
|
||||
DISPLAY_A(_DIREG(DC_WIN_AD_WIN_OPTIONS)) = 0;
|
||||
|
|
@ -842,8 +849,8 @@ u32 *display_init_framebuffer_pitch()
|
|||
// Sanitize framebuffer area.
|
||||
memset((u32 *)IPL_FB_ADDRESS, 0, IPL_FB_SZ);
|
||||
|
||||
// This configures the framebuffer @ IPL_FB_ADDRESS with a resolution of 1280x720 (line stride 720).
|
||||
exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer_pitch, 32);
|
||||
// This configures the framebuffer @ IPL_FB_ADDRESS with a resolution of 720x1280 (line stride 720).
|
||||
exec_cfg((u32 *)DISPLAY_A_BASE, _di_win_framebuffer_pitch, CFG_SIZE(_di_win_framebuffer_pitch));
|
||||
//usleep(35000); // Wait 2 frames. No need on Aula.
|
||||
|
||||
return (u32 *)DISPLAY_A(_DIREG(DC_WINBUF_START_ADDR));
|
||||
|
|
@ -851,8 +858,8 @@ u32 *display_init_framebuffer_pitch()
|
|||
|
||||
u32 *display_init_framebuffer_pitch_inv()
|
||||
{
|
||||
// This configures the framebuffer @ NYX_FB_ADDRESS with a resolution of 1280x720 (line stride 720).
|
||||
exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer_pitch_inv, 34);
|
||||
// This configures the framebuffer @ NYX_FB_ADDRESS with a resolution of 720x1280 (line stride 720).
|
||||
exec_cfg((u32 *)DISPLAY_A_BASE, _di_win_framebuffer_pitch_inv, CFG_SIZE(_di_win_framebuffer_pitch_inv));
|
||||
usleep(35000); // Wait 2 frames. No need on Aula.
|
||||
|
||||
return (u32 *)DISPLAY_A(_DIREG(DC_WINBUF_START_ADDR));
|
||||
|
|
@ -860,8 +867,8 @@ u32 *display_init_framebuffer_pitch_inv()
|
|||
|
||||
u32 *display_init_framebuffer_block()
|
||||
{
|
||||
// This configures the framebuffer @ NYX_FB_ADDRESS with a resolution of 1280x720 (line stride 720).
|
||||
exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer_block, 34);
|
||||
// This configures the framebuffer @ NYX_FB_ADDRESS with a resolution of 720x1280.
|
||||
exec_cfg((u32 *)DISPLAY_A_BASE, _di_win_framebuffer_block, CFG_SIZE(_di_win_framebuffer_block));
|
||||
usleep(35000); // Wait 2 frames. No need on Aula.
|
||||
|
||||
return (u32 *)DISPLAY_A(_DIREG(DC_WINBUF_START_ADDR));
|
||||
|
|
@ -870,7 +877,7 @@ u32 *display_init_framebuffer_block()
|
|||
u32 *display_init_framebuffer_log()
|
||||
{
|
||||
// This configures the framebuffer @ LOG_FB_ADDRESS with a resolution of 1280x720 (line stride 720).
|
||||
exec_cfg((u32 *)DISPLAY_A_BASE, cfg_display_framebuffer_log, 20);
|
||||
exec_cfg((u32 *)DISPLAY_A_BASE, _di_win_framebuffer_log, CFG_SIZE(_di_win_framebuffer_log));
|
||||
|
||||
return (u32 *)DISPLAY_A(_DIREG(DC_WINBUF_START_ADDR));
|
||||
}
|
||||
|
|
|
|||
|
|
@ -43,13 +43,17 @@
|
|||
|
||||
// DC_CMD non-shadowed command/sync registers.
|
||||
#define DC_CMD_GENERAL_INCR_SYNCPT 0x00
|
||||
#define SYNCPT_GENERAL_INDX(x) (((x) & 0xff) << 0)
|
||||
#define SYNCPT_GENERAL_COND(x) (((x) & 0xff) << 8)
|
||||
#define COND_REG_WR_SAFE 3
|
||||
|
||||
#define DC_CMD_GENERAL_INCR_SYNCPT_CNTRL 0x01
|
||||
#define SYNCPT_CNTRL_SOFT_RESET BIT(0)
|
||||
#define SYNCPT_CNTRL_NO_STALL BIT(8)
|
||||
|
||||
#define DC_CMD_CONT_SYNCPT_VSYNC 0x28
|
||||
#define SYNCPT_VSYNC_ENABLE BIT(8)
|
||||
#define SYNCPT_VSYNC_INDX(x) (((x) & 0xff) << 0)
|
||||
#define SYNCPT_VSYNC_ENABLE BIT(8)
|
||||
|
||||
#define DC_CMD_DISPLAY_COMMAND_OPTION0 0x031
|
||||
|
||||
|
|
@ -98,7 +102,13 @@
|
|||
#define WINDOW_C_SELECT BIT(6)
|
||||
#define WINDOW_D_SELECT BIT(7)
|
||||
|
||||
#define DC_CMD_REG_ACT_CONTROL 0x043
|
||||
#define DC_CMD_REG_ACT_CONTROL 0x43
|
||||
#define GENERAL_ACT_HCNTR_SEL BIT(0)
|
||||
#define WIN_A_ACT_HCNTR_SEL BIT(2)
|
||||
#define WIN_B_ACT_HCNTR_SEL BIT(4)
|
||||
#define WIN_C_ACT_HCNTR_SEL BIT(6)
|
||||
#define CURSOR_ACT_HCNTR_SEL BIT(7)
|
||||
#define WIN_D_ACT_HCNTR_SEL BIT(10)
|
||||
|
||||
// DC_D_WIN_DD window D instance of DC_WIN
|
||||
#define DC_D_WIN_DD_WIN_OPTIONS 0x80
|
||||
|
|
@ -124,6 +134,7 @@
|
|||
#define DC_COM_CRC_CONTROL 0x300
|
||||
#define DC_COM_PIN_OUTPUT_ENABLE(x) (0x302 + (x))
|
||||
#define DC_COM_PIN_OUTPUT_POLARITY(x) (0x306 + (x))
|
||||
#define LSC0_OUTPUT_POLARITY_LOW BIT(24)
|
||||
|
||||
#define DC_COM_DSC_TOP_CTL 0x33E
|
||||
|
||||
|
|
@ -139,12 +150,29 @@
|
|||
|
||||
#define DC_DISP_DISP_MEM_HIGH_PRIORITY 0x403
|
||||
#define DC_DISP_DISP_MEM_HIGH_PRIORITY_TIMER 0x404
|
||||
|
||||
#define DC_DISP_DISP_TIMING_OPTIONS 0x405
|
||||
#define VSYNC_H_POSITION(x) (((x) & 0x1fff) << 0)
|
||||
|
||||
#define DC_DISP_REF_TO_SYNC 0x406
|
||||
#define H_REF_TO_SYNC(x) (((x) & 0x1fff) << 0) // Min 0 pixel clock.
|
||||
#define V_REF_TO_SYNC(x) (((x) & 0x1fff) << 16) // Min 1 line clock.
|
||||
|
||||
#define DC_DISP_SYNC_WIDTH 0x407
|
||||
#define H_SYNC_WIDTH(x) (((x) & 0x1fff) << 0) // Min 1 pixel clock.
|
||||
#define V_SYNC_WIDTH(x) (((x) & 0x1fff) << 16) // Min 1 line clock.
|
||||
|
||||
#define DC_DISP_BACK_PORCH 0x408
|
||||
#define H_BACK_PORCH(x) (((x) & 0x1fff) << 0)
|
||||
#define V_BACK_PORCH(x) (((x) & 0x1fff) << 16)
|
||||
|
||||
#define DC_DISP_ACTIVE 0x409
|
||||
#define H_DISP_ACTIVE(x) (((x) & 0x1fff) << 0) // Min 16 pixel clock.
|
||||
#define V_DISP_ACTIVE(x) (((x) & 0x1fff) << 16) // Min 16 line clock.
|
||||
|
||||
#define DC_DISP_FRONT_PORCH 0x40A
|
||||
#define H_FRONT_PORCH(x) (((x) & 0x1fff) << 0) // Min -=PS_=-H_REF_TO_SYNC + 1
|
||||
#define V_FRONT_PORCH(x) (((x) & 0x1fff) << 16) // Min -=PS_=-V_REF_TO_SYNC + 1
|
||||
|
||||
#define DC_DISP_DISP_CLOCK_CONTROL 0x42E
|
||||
#define SHIFT_CLK_DIVIDER(x) ((x) & 0xff)
|
||||
|
|
@ -239,6 +267,10 @@
|
|||
#define DC_DISP_SD_BL_CONTROL 0x4DC
|
||||
#define DC_DISP_BLEND_BACKGROUND_COLOR 0x4E4
|
||||
|
||||
#define DC_WINC_COLOR_PALETTE 0x500
|
||||
#define DC_WINC_COLOR_PALETTE_IDX(off) (DC_WINC_COLOR_PALETTE + (off))
|
||||
#define DC_WINC_PALETTE_COLOR_EXT 0x600
|
||||
|
||||
#define DC_WIN_CSC_YOF 0x611
|
||||
#define DC_WIN_CSC_KYRGB 0x612
|
||||
#define DC_WIN_CSC_KUR 0x613
|
||||
|
|
@ -253,12 +285,13 @@
|
|||
|
||||
// The following registers are A/B/C shadows of the 0xB80/0xD80/0xF80 registers (see DISPLAY_WINDOW_HEADER).
|
||||
#define DC_WIN_WIN_OPTIONS 0x700
|
||||
#define H_DIRECTION BIT(0)
|
||||
#define V_DIRECTION BIT(2)
|
||||
#define SCAN_COLUMN BIT(4)
|
||||
#define COLOR_EXPAND BIT(6)
|
||||
#define CSC_ENABLE BIT(18)
|
||||
#define WIN_ENABLE BIT(30)
|
||||
#define H_DIRECTION BIT(0)
|
||||
#define V_DIRECTION BIT(2)
|
||||
#define SCAN_COLUMN BIT(4)
|
||||
#define COLOR_EXPAND BIT(6)
|
||||
#define COLOR_PALETTE_ENABLE BIT(16)
|
||||
#define CSC_ENABLE BIT(18)
|
||||
#define WIN_ENABLE BIT(30)
|
||||
|
||||
#define DC_WIN_BUFFER_CONTROL 0x702
|
||||
#define BUFFER_CONTROL_HOST 0
|
||||
|
|
@ -290,10 +323,22 @@
|
|||
#define WIN_COLOR_DEPTH_YUV422R 0x17
|
||||
#define WIN_COLOR_DEPTH_YCbCr422RA 0x18
|
||||
#define WIN_COLOR_DEPTH_YUV422RA 0x19
|
||||
#define WIN_COLOR_DEPTH_YCbCr444P 0x29
|
||||
#define WIN_COLOR_DEPTH_YCrCb420SP 0x2A
|
||||
#define WIN_COLOR_DEPTH_YCbCr420SP 0x2B
|
||||
#define WIN_COLOR_DEPTH_YCrCb422SP 0x2C
|
||||
#define WIN_COLOR_DEPTH_YCbCr422SP 0x2D
|
||||
#define WIN_COLOR_DEPTH_YUV444P 0x34
|
||||
#define WIN_COLOR_DEPTH_YVU420SP 0x35
|
||||
#define WIN_COLOR_DEPTH_YUV420SP 0x36
|
||||
#define WIN_COLOR_DEPTH_YVU422SP 0x37
|
||||
#define WIN_COLOR_DEPTH_YUV422SP 0x38
|
||||
#define WIN_COLOR_DEPTH_YVU444SP 0x3B
|
||||
#define WIN_COLOR_DEPTH_YUV444SP 0x3C
|
||||
|
||||
#define DC_WIN_POSITION 0x704
|
||||
#define H_POSITION(x) (((x) & 0xFfff) << 0)
|
||||
#define V_POSITION(x) (((x) & 0x1fff) << 16)
|
||||
#define H_POSITION(x) (((x) & 0xffff) << 0) // Support negative.
|
||||
#define V_POSITION(x) (((x) & 0xffff) << 16) // Support negative.
|
||||
|
||||
#define DC_WIN_SIZE 0x705
|
||||
#define H_SIZE(x) (((x) & 0x1fff) << 0)
|
||||
|
|
@ -316,6 +361,7 @@
|
|||
#define DC_WIN_DV_CONTROL 0x70E
|
||||
|
||||
#define DC_WINBUF_BLEND_LAYER_CONTROL 0x716
|
||||
#define WIN_BLEND_DEPTH(x) (((x) & 0xff) << 0)
|
||||
#define WIN_K1(x) (((x) & 0xff) << 8)
|
||||
#define WIN_K2(x) (((x) & 0xff) << 16)
|
||||
#define WIN_BLEND_ENABLE (0 << 24)
|
||||
|
|
@ -386,6 +432,7 @@
|
|||
#define DSI_HOST_CONTROL_FIFO_SEL BIT(4)
|
||||
#define DSI_HOST_CONTROL_HS BIT(5)
|
||||
#define DSI_HOST_CONTROL_RAW BIT(6)
|
||||
#define DSI_HOST_CONTROL_TX_TRIG_MASK (3 << 12)
|
||||
#define DSI_HOST_CONTROL_TX_TRIG_SOL (0 << 12)
|
||||
#define DSI_HOST_CONTROL_TX_TRIG_FIFO (1 << 12)
|
||||
#define DSI_HOST_CONTROL_TX_TRIG_HOST (2 << 12)
|
||||
|
|
@ -433,10 +480,14 @@
|
|||
#define DSI_PKT_SEQ_5_LO 0x2D
|
||||
#define DSI_PKT_SEQ_5_HI 0x2E
|
||||
#define DSI_DCS_CMDS 0x33
|
||||
|
||||
#define DSI_PKT_LEN_0_1 0x34
|
||||
#define DSI_PKT_LEN_2_3 0x35
|
||||
#define DSI_PKT_LEN_4_5 0x36
|
||||
#define DSI_PKT_LEN_6_7 0x37
|
||||
#define PKT0_LEN(x) (((x) & 0xffff) << 0)
|
||||
#define PKT1_LEN(x) (((x) & 0xffff) << 16)
|
||||
|
||||
#define DSI_PHY_TIMING_0 0x3C
|
||||
#define DSI_PHY_TIMING_1 0x3D
|
||||
#define DSI_PHY_TIMING_2 0x3E
|
||||
|
|
@ -726,7 +777,7 @@ void display_backlight(bool enable);
|
|||
void display_backlight_brightness(u32 brightness, u32 step_delay);
|
||||
u32 display_get_backlight_brightness();
|
||||
|
||||
/*! Init display in full 1280x720 resolution (B8G8R8A8, line stride 768, framebuffer size = 1280*768*4 bytes). */
|
||||
/*! Init display in full 720x1280 resolution (B8G8R8A8, line stride 720, framebuffer size = 720*1280*4 bytes). */
|
||||
u32 *display_init_framebuffer_pitch();
|
||||
u32 *display_init_framebuffer_pitch_inv();
|
||||
u32 *display_init_framebuffer_block();
|
||||
|
|
|
|||
|
|
@ -15,8 +15,8 @@
|
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
//Display A config.
|
||||
static const cfg_op_t _display_dc_setup_win_config[94] = {
|
||||
// Display A config.
|
||||
static const cfg_op_t _di_dc_setup_win_config[] = {
|
||||
{DC_CMD_STATE_ACCESS, 0},
|
||||
{DC_CMD_STATE_CONTROL, GENERAL_UPDATE},
|
||||
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ},
|
||||
|
|
@ -119,18 +119,18 @@ static const cfg_op_t _display_dc_setup_win_config[94] = {
|
|||
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ | WIN_B_ACT_REQ | WIN_C_ACT_REQ}
|
||||
};
|
||||
|
||||
//DSI Init config.
|
||||
static const cfg_op_t _display_dsi_init_config_part1[8] = {
|
||||
// DSI Init config.
|
||||
static const cfg_op_t _di_dsi_init_irq_pkt_config0[] = {
|
||||
{DSI_WR_DATA, 0},
|
||||
{DSI_INT_ENABLE, 0},
|
||||
{DSI_INT_STATUS, 0},
|
||||
{DSI_INT_MASK, 0},
|
||||
{DSI_INT_MASK, 0},
|
||||
{DSI_INIT_SEQ_DATA_0, 0},
|
||||
{DSI_INIT_SEQ_DATA_1, 0},
|
||||
{DSI_INIT_SEQ_DATA_2, 0},
|
||||
{DSI_INIT_SEQ_DATA_3, 0}
|
||||
};
|
||||
static const cfg_op_t _display_dsi_init_config_part2[14] = {
|
||||
static const cfg_op_t _di_dsi_init_irq_pkt_config1[] = {
|
||||
{DSI_DCS_CMDS, 0},
|
||||
{DSI_PKT_SEQ_0_LO, 0},
|
||||
{DSI_PKT_SEQ_1_LO, 0},
|
||||
|
|
@ -146,7 +146,7 @@ static const cfg_op_t _display_dsi_init_config_part2[14] = {
|
|||
{DSI_PKT_SEQ_5_HI, 0},
|
||||
{DSI_CONTROL, 0}
|
||||
};
|
||||
static const cfg_op_t _display_dsi_init_config_part3_t210b01[7] = {
|
||||
static const cfg_op_t _di_dsi_init_pads_t210b01[] = {
|
||||
{DSI_PAD_CONTROL_1, 0},
|
||||
{DSI_PAD_CONTROL_2, 0},
|
||||
{DSI_PAD_CONTROL_3, 0},
|
||||
|
|
@ -155,10 +155,10 @@ static const cfg_op_t _display_dsi_init_config_part3_t210b01[7] = {
|
|||
{DSI_PAD_CONTROL_6_B01, 0},
|
||||
{DSI_PAD_CONTROL_7_B01, 0}
|
||||
};
|
||||
static const cfg_op_t _display_dsi_init_config_part4[10] = {
|
||||
static const cfg_op_t _di_dsi_init_timing_pkt_config2[] = {
|
||||
{DSI_PAD_CONTROL_CD, 0},
|
||||
{DSI_SOL_DELAY, 0x18},
|
||||
{DSI_MAX_THRESHOLD, 0x1E0},
|
||||
{DSI_SOL_DELAY, 24},
|
||||
{DSI_MAX_THRESHOLD, 480},
|
||||
{DSI_TRIGGER, 0},
|
||||
{DSI_INIT_SEQ_CONTROL, 0},
|
||||
{DSI_PKT_LEN_0_1, 0},
|
||||
|
|
@ -167,12 +167,12 @@ static const cfg_op_t _display_dsi_init_config_part4[10] = {
|
|||
{DSI_PKT_LEN_6_7, 0},
|
||||
{DSI_PAD_CONTROL_1, 0}
|
||||
};
|
||||
static const cfg_op_t _display_dsi_init_config_part5[12] = {
|
||||
static const cfg_op_t _di_dsi_init_timing_pwrctrl_config[] = {
|
||||
{DSI_PHY_TIMING_1, 0x40A0E05},
|
||||
{DSI_PHY_TIMING_2, 0x30109},
|
||||
{DSI_BTA_TIMING, 0x190A14},
|
||||
{DSI_BTA_TIMING, 0x190A14},
|
||||
{DSI_TIMEOUT_0, DSI_TIMEOUT_LRX(0x2000) | DSI_TIMEOUT_HTX(0xFFFF)},
|
||||
{DSI_TIMEOUT_1, DSI_TIMEOUT_PR(0x765) | DSI_TIMEOUT_TA(0x2000)},
|
||||
{DSI_TIMEOUT_1, DSI_TIMEOUT_PR(0x765) | DSI_TIMEOUT_TA(0x2000)},
|
||||
{DSI_TO_TALLY, 0},
|
||||
{DSI_PAD_CONTROL_0, DSI_PAD_CONTROL_VS1_PULLDN(0) | DSI_PAD_CONTROL_VS1_PDIO(0)}, // Enable
|
||||
{DSI_POWER_CONTROL, DSI_POWER_CONTROL_ENABLE},
|
||||
|
|
@ -181,25 +181,25 @@ static const cfg_op_t _display_dsi_init_config_part5[12] = {
|
|||
{DSI_POWER_CONTROL, 0},
|
||||
{DSI_PAD_CONTROL_1, 0}
|
||||
};
|
||||
static const cfg_op_t _display_dsi_init_config_part6[14] = {
|
||||
static const cfg_op_t _di_dsi_init_timing_pkt_config3[] = {
|
||||
{DSI_PHY_TIMING_1, 0x40A0E05},
|
||||
{DSI_PHY_TIMING_2, 0x30118},
|
||||
{DSI_BTA_TIMING, 0x190A14},
|
||||
{DSI_BTA_TIMING, 0x190A14},
|
||||
{DSI_TIMEOUT_0, DSI_TIMEOUT_LRX(0x2000) | DSI_TIMEOUT_HTX(0xFFFF)},
|
||||
{DSI_TIMEOUT_1, DSI_TIMEOUT_PR(0x1343) | DSI_TIMEOUT_TA(0x2000)},
|
||||
{DSI_TIMEOUT_1, DSI_TIMEOUT_PR(0x1343) | DSI_TIMEOUT_TA(0x2000)},
|
||||
{DSI_TO_TALLY, 0},
|
||||
{DSI_HOST_CONTROL, DSI_HOST_CONTROL_CRC_RESET | DSI_HOST_CONTROL_TX_TRIG_HOST | DSI_HOST_CONTROL_CS | DSI_HOST_CONTROL_ECC},
|
||||
{DSI_CONTROL, DSI_CONTROL_LANES(3) | DSI_CONTROL_HOST_ENABLE},
|
||||
{DSI_POWER_CONTROL, DSI_POWER_CONTROL_ENABLE},
|
||||
{DSI_POWER_CONTROL, DSI_POWER_CONTROL_ENABLE},
|
||||
{DSI_MAX_THRESHOLD, 0x40},
|
||||
{DSI_MAX_THRESHOLD, 64},
|
||||
{DSI_TRIGGER, 0},
|
||||
{DSI_TX_CRC, 0},
|
||||
{DSI_INIT_SEQ_CONTROL, 0}
|
||||
};
|
||||
|
||||
//DSI panel config.
|
||||
static const cfg_op_t _display_init_config_jdi[43] = {
|
||||
// DSI panel JDI config.
|
||||
static const cfg_op_t _di_dsi_panel_init_config_jdi[] = {
|
||||
{DSI_WR_DATA, 0x0439}, // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
|
||||
{DSI_WR_DATA, 0x9483FFB9}, // MIPI_DCS_PRIV_SET_EXTC. (Pass: FF 83 94).
|
||||
{DSI_TRIGGER, DSI_TRIGGER_HOST},
|
||||
|
|
@ -245,13 +245,13 @@ static const cfg_op_t _display_init_config_jdi[43] = {
|
|||
{DSI_TRIGGER, DSI_TRIGGER_HOST}
|
||||
};
|
||||
|
||||
//DSI packet config.
|
||||
static const cfg_op_t _display_dsi_packet_config[19] = {
|
||||
// DSI packet config.
|
||||
static const cfg_op_t _di_dsi_init_seq_pkt_final_config[] = {
|
||||
{DSI_PHY_TIMING_1, 0x40A0E05},
|
||||
{DSI_PHY_TIMING_2, 0x30172},
|
||||
{DSI_BTA_TIMING, 0x190A14},
|
||||
{DSI_BTA_TIMING, 0x190A14},
|
||||
{DSI_TIMEOUT_0, DSI_TIMEOUT_LRX(0x2000) | DSI_TIMEOUT_HTX(0xA40)},
|
||||
{DSI_TIMEOUT_1, DSI_TIMEOUT_PR(0x5A2F) | DSI_TIMEOUT_TA(0x2000)},
|
||||
{DSI_TIMEOUT_1, DSI_TIMEOUT_PR(0x5A2F) | DSI_TIMEOUT_TA(0x2000)},
|
||||
{DSI_TO_TALLY, 0},
|
||||
{DSI_PKT_SEQ_0_LO, 0x40000208},
|
||||
{DSI_PKT_SEQ_2_LO, 0x40000308},
|
||||
|
|
@ -261,66 +261,66 @@ static const cfg_op_t _display_dsi_packet_config[19] = {
|
|||
{DSI_PKT_SEQ_3_HI, 0x2CC},
|
||||
{DSI_PKT_SEQ_5_LO, 0x3F3B2B08},
|
||||
{DSI_PKT_SEQ_5_HI, 0x2CC},
|
||||
{DSI_PKT_LEN_0_1, 0xCE0000},
|
||||
{DSI_PKT_LEN_2_3, 0x87001A2},
|
||||
{DSI_PKT_LEN_4_5, 0x190},
|
||||
{DSI_PKT_LEN_6_7, 0x190},
|
||||
{DSI_PKT_LEN_0_1, PKT1_LEN(206) | PKT0_LEN(0)},
|
||||
{DSI_PKT_LEN_2_3, PKT1_LEN(2160) | PKT0_LEN(418)},
|
||||
{DSI_PKT_LEN_4_5, PKT1_LEN(0) | PKT0_LEN(400)},
|
||||
{DSI_PKT_LEN_6_7, PKT1_LEN(0) | PKT0_LEN(400)},
|
||||
{DSI_HOST_CONTROL, 0}
|
||||
};
|
||||
|
||||
//DSI mode config.
|
||||
static const cfg_op_t _display_dsi_mode_config[10] = {
|
||||
// DSI mode config.
|
||||
static const cfg_op_t _di_dsi_mode_config[] = {
|
||||
{DSI_TRIGGER, 0},
|
||||
{DSI_CONTROL, 0},
|
||||
{DSI_SOL_DELAY, 6},
|
||||
{DSI_MAX_THRESHOLD, 0x1E0},
|
||||
{DSI_MAX_THRESHOLD, 480},
|
||||
{DSI_POWER_CONTROL, DSI_POWER_CONTROL_ENABLE},
|
||||
{DSI_CONTROL, DSI_CONTROL_HS_CLK_CTRL | DSI_CONTROL_FORMAT(3) | DSI_CONTROL_LANES(3) | DSI_CONTROL_VIDEO_ENABLE},
|
||||
{DSI_HOST_CONTROL, DSI_HOST_CONTROL_HS | DSI_HOST_CONTROL_FIFO_SEL| DSI_HOST_CONTROL_CS | DSI_HOST_CONTROL_ECC},
|
||||
{DSI_HOST_CONTROL, DSI_HOST_CONTROL_HS | DSI_HOST_CONTROL_FIFO_SEL | DSI_HOST_CONTROL_CS | DSI_HOST_CONTROL_ECC},
|
||||
{DSI_CONTROL, DSI_CONTROL_HS_CLK_CTRL | DSI_CONTROL_FORMAT(3) | DSI_CONTROL_LANES(3) | DSI_CONTROL_VIDEO_ENABLE},
|
||||
{DSI_HOST_CONTROL, DSI_HOST_CONTROL_CS | DSI_HOST_CONTROL_ECC},
|
||||
{DSI_HOST_CONTROL, DSI_HOST_CONTROL_HS | DSI_HOST_CONTROL_CS | DSI_HOST_CONTROL_ECC}
|
||||
{DSI_HOST_CONTROL, DSI_HOST_CONTROL_TX_TRIG_SOL | DSI_HOST_CONTROL_CS | DSI_HOST_CONTROL_ECC},
|
||||
{DSI_HOST_CONTROL, DSI_HOST_CONTROL_HS | DSI_HOST_CONTROL_TX_TRIG_SOL | DSI_HOST_CONTROL_CS | DSI_HOST_CONTROL_ECC}
|
||||
};
|
||||
|
||||
//MIPI CAL config.
|
||||
static const cfg_op_t _display_mipi_pad_cal_config[4] = {
|
||||
// MIPI CAL config.
|
||||
static const cfg_op_t _di_mipi_pad_cal_config[] = {
|
||||
{MIPI_CAL_MIPI_BIAS_PAD_CFG2, 0},
|
||||
{MIPI_CAL_CIL_MIPI_CAL_STATUS, 0xF3F10000},
|
||||
{MIPI_CAL_MIPI_BIAS_PAD_CFG0, 0},
|
||||
{MIPI_CAL_MIPI_BIAS_PAD_CFG2, 0}
|
||||
};
|
||||
|
||||
//DSI config.
|
||||
static const cfg_op_t _display_dsi_pad_cal_config_t210[4] = {
|
||||
// DSI pad config.
|
||||
static const cfg_op_t _di_dsi_pad_cal_config_t210[] = {
|
||||
{DSI_PAD_CONTROL_1, 0},
|
||||
{DSI_PAD_CONTROL_2, 0},
|
||||
{DSI_PAD_CONTROL_3, DSI_PAD_PREEMP_PD_CLK(0x3) | DSI_PAD_PREEMP_PU_CLK(0x3) | DSI_PAD_PREEMP_PD(0x03) | DSI_PAD_PREEMP_PU(0x3)},
|
||||
{DSI_PAD_CONTROL_4, 0}
|
||||
};
|
||||
static const cfg_op_t _display_dsi_pad_cal_config_t210b01[7] = {
|
||||
{DSI_PAD_CONTROL_1, 0},
|
||||
{DSI_PAD_CONTROL_2, 0},
|
||||
{DSI_PAD_CONTROL_3, 0},
|
||||
{DSI_PAD_CONTROL_4, 0x77777},
|
||||
static const cfg_op_t _di_dsi_pad_cal_config_t210b01[] = {
|
||||
{DSI_PAD_CONTROL_1, 0},
|
||||
{DSI_PAD_CONTROL_2, 0},
|
||||
{DSI_PAD_CONTROL_3, 0},
|
||||
{DSI_PAD_CONTROL_4, 0x77777},
|
||||
{DSI_PAD_CONTROL_5_B01, 0x77777},
|
||||
{DSI_PAD_CONTROL_6_B01, 0x1111},
|
||||
{DSI_PAD_CONTROL_7_B01, 0}
|
||||
};
|
||||
|
||||
//MIPI CAL config.
|
||||
static const cfg_op_t _display_mipi_dsi_cal_offsets_config_t210[4] = {
|
||||
// MIPI CAL config.
|
||||
static const cfg_op_t _di_mipi_dsi_cal_offsets_config_t210[] = {
|
||||
{MIPI_CAL_DSIA_MIPI_CAL_CONFIG, 0x200200},
|
||||
{MIPI_CAL_DSIB_MIPI_CAL_CONFIG, 0x200200},
|
||||
{MIPI_CAL_DSIA_MIPI_CAL_CONFIG_2, 0x200002},
|
||||
{MIPI_CAL_DSIB_MIPI_CAL_CONFIG_2, 0x200002}
|
||||
};
|
||||
static const cfg_op_t _display_mipi_dsi_cal_offsets_config_t210b01[4] = {
|
||||
static const cfg_op_t _di_mipi_dsi_cal_offsets_config_t210b01[] = {
|
||||
{MIPI_CAL_DSIA_MIPI_CAL_CONFIG, 0x200006},
|
||||
{MIPI_CAL_DSIB_MIPI_CAL_CONFIG, 0x200006},
|
||||
{MIPI_CAL_DSIA_MIPI_CAL_CONFIG_2, 0x260000},
|
||||
{MIPI_CAL_DSIB_MIPI_CAL_CONFIG_2, 0x260000}
|
||||
};
|
||||
static const cfg_op_t _display_mipi_apply_dsi_cal_config[12] = {
|
||||
static const cfg_op_t _di_mipi_start_dsi_cal_config[] = {
|
||||
{MIPI_CAL_CILA_MIPI_CAL_CONFIG, 0},
|
||||
{MIPI_CAL_CILB_MIPI_CAL_CONFIG, 0},
|
||||
{MIPI_CAL_CILC_MIPI_CAL_CONFIG, 0},
|
||||
|
|
@ -332,11 +332,11 @@ static const cfg_op_t _display_mipi_apply_dsi_cal_config[12] = {
|
|||
{MIPI_CAL_DSIB_MIPI_CAL_CONFIG_2, 0},
|
||||
{MIPI_CAL_DSIC_MIPI_CAL_CONFIG_2, 0},
|
||||
{MIPI_CAL_DSID_MIPI_CAL_CONFIG_2, 0},
|
||||
{MIPI_CAL_MIPI_CAL_CTRL, 0x2A000001}
|
||||
{MIPI_CAL_MIPI_CAL_CTRL, 0x2A000001} // Set Prescale and filter and start calibration.
|
||||
};
|
||||
|
||||
//Display A config.
|
||||
static const cfg_op_t _display_video_disp_controller_enable_config[113] = {
|
||||
// Display A enable config.
|
||||
static const cfg_op_t _di_dc_video_enable_config[] = {
|
||||
{DC_CMD_STATE_ACCESS, 0},
|
||||
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT},
|
||||
{DC_WIN_WIN_OPTIONS, 0},
|
||||
|
|
@ -397,7 +397,7 @@ static const cfg_op_t _display_video_disp_controller_enable_config[113] = {
|
|||
{DC_WIN_WIN_OPTIONS, 0},
|
||||
{DC_DISP_DISP_COLOR_CONTROL, BASE_COLOR_SIZE_888},
|
||||
{DC_DISP_DISP_INTERFACE_CONTROL, DISP_DATA_FORMAT_DF1P1C},
|
||||
{DC_COM_PIN_OUTPUT_POLARITY(1), 0x1000000},
|
||||
{DC_COM_PIN_OUTPUT_POLARITY(1), LSC0_OUTPUT_POLARITY_LOW},
|
||||
{DC_COM_PIN_OUTPUT_POLARITY(3), 0},
|
||||
{DC_DISP_BLEND_BACKGROUND_COLOR, 0},
|
||||
{DC_COM_CRC_CONTROL, 0},
|
||||
|
|
@ -422,34 +422,13 @@ static const cfg_op_t _display_video_disp_controller_enable_config[113] = {
|
|||
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ | WIN_B_ACT_REQ | WIN_C_ACT_REQ},
|
||||
{DC_CMD_STATE_ACCESS, 0},
|
||||
|
||||
/* Set Display timings
|
||||
*
|
||||
* DC_DISP_REF_TO_SYNC:
|
||||
* V_REF_TO_SYNC - 1
|
||||
* H_REF_TO_SYNC - 0
|
||||
*
|
||||
* DC_DISP_SYNC_WIDTH:
|
||||
* V_SYNC_WIDTH - 1
|
||||
* H_SYNC_WIDTH - 72
|
||||
*
|
||||
* DC_DISP_BACK_PORCH:
|
||||
* V_BACK_PORCH - 9
|
||||
* H_BACK_PORCH - 72
|
||||
*
|
||||
* DC_DISP_ACTIVE:
|
||||
* V_DISP_ACTIVE - 1280
|
||||
* H_DISP_ACTIVE - 720
|
||||
*
|
||||
* DC_DISP_FRONT_PORCH:
|
||||
* V_FRONT_PORCH - 10
|
||||
* H_FRONT_PORCH - 136
|
||||
*/
|
||||
{DC_DISP_DISP_TIMING_OPTIONS, 0},
|
||||
{DC_DISP_REF_TO_SYNC, 0x10000},
|
||||
{DC_DISP_SYNC_WIDTH, 0x10048},
|
||||
{DC_DISP_BACK_PORCH, 0x90048},
|
||||
{DC_DISP_ACTIVE, 0x50002D0},
|
||||
{DC_DISP_FRONT_PORCH, 0xA0088}, // Sources say that this should happen before DC_DISP_ACTIVE cmd.
|
||||
/* Set panel timings */
|
||||
{DC_DISP_DISP_TIMING_OPTIONS, VSYNC_H_POSITION(0)},
|
||||
{DC_DISP_REF_TO_SYNC, V_REF_TO_SYNC(1) | H_REF_TO_SYNC(0)},
|
||||
{DC_DISP_SYNC_WIDTH, V_SYNC_WIDTH(1) | H_SYNC_WIDTH(72)},
|
||||
{DC_DISP_BACK_PORCH, V_BACK_PORCH(9) | H_BACK_PORCH(72)},
|
||||
{DC_DISP_FRONT_PORCH, V_FRONT_PORCH(10) | H_FRONT_PORCH(136)},
|
||||
{DC_DISP_ACTIVE, V_DISP_ACTIVE(1280) | H_DISP_ACTIVE(720)},
|
||||
/* End of Display timings */
|
||||
|
||||
{DC_DISP_SHIFT_CLOCK_OPTIONS, SC1_H_QUALIFIER_NONE | SC0_H_QUALIFIER_NONE},
|
||||
|
|
@ -469,7 +448,7 @@ static const cfg_op_t _display_video_disp_controller_enable_config[113] = {
|
|||
{DC_CMD_STATE_CONTROL, GENERAL_UPDATE},
|
||||
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ},
|
||||
{DC_CMD_STATE_ACCESS, READ_MUX | WRITE_MUX},
|
||||
{DC_DISP_FRONT_PORCH, 0xA0088},
|
||||
{DC_DISP_FRONT_PORCH, V_FRONT_PORCH(10) | H_FRONT_PORCH(136)},
|
||||
{DC_CMD_STATE_ACCESS, 0},
|
||||
{DC_CMD_STATE_CONTROL, GENERAL_UPDATE},
|
||||
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ},
|
||||
|
|
@ -483,9 +462,9 @@ static const cfg_op_t _display_video_disp_controller_enable_config[113] = {
|
|||
{DC_CMD_DISPLAY_COMMAND_OPTION0, 0}
|
||||
};
|
||||
|
||||
////Display A config.
|
||||
static const cfg_op_t _display_video_disp_controller_disable_config[17] = {
|
||||
{DC_DISP_FRONT_PORCH, 0xA0088},
|
||||
// Display A disable config.
|
||||
static const cfg_op_t _di_dc_video_disable_config[] = {
|
||||
{DC_DISP_FRONT_PORCH, V_FRONT_PORCH(10) | H_FRONT_PORCH(136)},
|
||||
{DC_CMD_INT_MASK, 0},
|
||||
{DC_CMD_STATE_ACCESS, 0},
|
||||
{DC_CMD_INT_ENABLE, 0},
|
||||
|
|
@ -504,28 +483,28 @@ static const cfg_op_t _display_video_disp_controller_disable_config[17] = {
|
|||
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ},
|
||||
};
|
||||
|
||||
//DSI config.
|
||||
static const cfg_op_t _display_dsi_timing_deinit_config[16] = {
|
||||
// DSI deinit config.
|
||||
static const cfg_op_t _di_dsi_timing_deinit_config[] = {
|
||||
{DSI_POWER_CONTROL, 0},
|
||||
{DSI_PAD_CONTROL_1, 0},
|
||||
{DSI_PHY_TIMING_0, 0x6070601},
|
||||
{DSI_PHY_TIMING_1, 0x40A0E05},
|
||||
{DSI_PHY_TIMING_2, 0x30118},
|
||||
{DSI_BTA_TIMING, 0x190A14},
|
||||
{DSI_BTA_TIMING, 0x190A14},
|
||||
{DSI_TIMEOUT_0, DSI_TIMEOUT_LRX(0x2000) | DSI_TIMEOUT_HTX(0xFFFF) },
|
||||
{DSI_TIMEOUT_1, DSI_TIMEOUT_PR(0x1343) | DSI_TIMEOUT_TA(0x2000)},
|
||||
{DSI_TIMEOUT_1, DSI_TIMEOUT_PR(0x1343) | DSI_TIMEOUT_TA(0x2000)},
|
||||
{DSI_TO_TALLY, 0},
|
||||
{DSI_HOST_CONTROL, DSI_HOST_CONTROL_CRC_RESET | DSI_HOST_CONTROL_TX_TRIG_HOST | DSI_HOST_CONTROL_CS | DSI_HOST_CONTROL_ECC},
|
||||
{DSI_CONTROL, DSI_CONTROL_LANES(3) | DSI_CONTROL_HOST_ENABLE},
|
||||
{DSI_POWER_CONTROL, DSI_POWER_CONTROL_ENABLE},
|
||||
{DSI_MAX_THRESHOLD, 0x40},
|
||||
{DSI_MAX_THRESHOLD, 64},
|
||||
{DSI_TRIGGER, 0},
|
||||
{DSI_TX_CRC, 0},
|
||||
{DSI_INIT_SEQ_CONTROL, 0}
|
||||
};
|
||||
|
||||
//DSI config (if ver == 0x10).
|
||||
static const cfg_op_t _display_deinit_config_jdi[22] = {
|
||||
// DSI panel JDI deinit config.
|
||||
static const cfg_op_t _di_dsi_panel_deinit_config_jdi[] = {
|
||||
{DSI_WR_DATA, 0x439}, // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
|
||||
{DSI_WR_DATA, 0x9483FFB9}, // MIPI_DCS_PRIV_SET_EXTC. (Pass: FF 83 94).
|
||||
{DSI_TRIGGER, DSI_TRIGGER_HOST},
|
||||
|
|
@ -550,7 +529,8 @@ static const cfg_op_t _display_deinit_config_jdi[22] = {
|
|||
{DSI_TRIGGER, DSI_TRIGGER_HOST}
|
||||
};
|
||||
|
||||
static const cfg_op_t _display_deinit_config_auo[37] = {
|
||||
// DSI panel AUO deinit config.
|
||||
static const cfg_op_t _di_dsi_panel_deinit_config_auo[] = {
|
||||
{DSI_WR_DATA, 0x439}, // MIPI_DSI_DCS_LONG_WRITE: 4 bytes.
|
||||
{DSI_WR_DATA, 0x9483FFB9}, // MIPI_DCS_PRIV_SET_EXTC. (Pass: FF 83 94).
|
||||
{DSI_TRIGGER, DSI_TRIGGER_HOST},
|
||||
|
|
@ -591,14 +571,14 @@ static const cfg_op_t _display_deinit_config_auo[37] = {
|
|||
{DSI_TRIGGER, DSI_TRIGGER_HOST}
|
||||
};
|
||||
|
||||
static const cfg_op_t _display_init_config_invert[3] = {
|
||||
static const cfg_op_t _di_init_config_invert[] = {
|
||||
{DSI_WR_DATA, 0x239},
|
||||
{DSI_WR_DATA, 0x02C1}, // INV_EN.
|
||||
{DSI_TRIGGER, DSI_TRIGGER_HOST},
|
||||
};
|
||||
|
||||
//Display A config.
|
||||
static const cfg_op_t cfg_display_one_color[8] = {
|
||||
// Display A Window A one color config.
|
||||
static const cfg_op_t _di_win_one_color[] = {
|
||||
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_A_SELECT},
|
||||
{DC_WIN_WIN_OPTIONS, 0},
|
||||
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_B_SELECT},
|
||||
|
|
@ -609,8 +589,8 @@ static const cfg_op_t cfg_display_one_color[8] = {
|
|||
{DC_CMD_DISPLAY_COMMAND, DISP_CTRL_MODE_C_DISPLAY} // Continuous display.
|
||||
};
|
||||
|
||||
//Display A config linear pitch.
|
||||
static const cfg_op_t cfg_display_framebuffer_pitch[32] = {
|
||||
// Display A Window A linear pitch config.
|
||||
static const cfg_op_t _di_win_framebuffer_pitch[] = {
|
||||
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT},
|
||||
{DC_WIN_WIN_OPTIONS, 0},
|
||||
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_B_SELECT},
|
||||
|
|
@ -645,8 +625,8 @@ static const cfg_op_t cfg_display_framebuffer_pitch[32] = {
|
|||
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ}
|
||||
};
|
||||
|
||||
//Display A config linear pitch inverse + Win D support.
|
||||
static const cfg_op_t cfg_display_framebuffer_pitch_inv[34] = {
|
||||
// Display A Window A linear pitch inverse + Win D support config.
|
||||
static const cfg_op_t _di_win_framebuffer_pitch_inv[] = {
|
||||
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_D_SELECT},
|
||||
{DC_WIN_WIN_OPTIONS, 0},
|
||||
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT},
|
||||
|
|
@ -683,8 +663,8 @@ static const cfg_op_t cfg_display_framebuffer_pitch_inv[34] = {
|
|||
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ}
|
||||
};
|
||||
|
||||
//Display A config block linear.
|
||||
static const cfg_op_t cfg_display_framebuffer_block[34] = {
|
||||
// Display A Window A block linear config.
|
||||
static const cfg_op_t _di_win_framebuffer_block[] = {
|
||||
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_D_SELECT},
|
||||
{DC_WIN_WIN_OPTIONS, 0},
|
||||
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_C_SELECT},
|
||||
|
|
@ -721,8 +701,8 @@ static const cfg_op_t cfg_display_framebuffer_block[34] = {
|
|||
{DC_CMD_STATE_CONTROL, GENERAL_ACT_REQ | WIN_A_ACT_REQ}
|
||||
};
|
||||
|
||||
//Display D config.
|
||||
static const cfg_op_t cfg_display_framebuffer_log[20] = {
|
||||
// Display A Window D config.
|
||||
static const cfg_op_t _di_win_framebuffer_log[] = {
|
||||
{DC_CMD_DISPLAY_WINDOW_HEADER, WINDOW_D_SELECT},
|
||||
{DC_WIN_WIN_OPTIONS, 0},
|
||||
{DC_WIN_COLOR_DEPTH, WIN_COLOR_DEPTH_B8G8R8A8},
|
||||
|
|
|
|||
|
|
@ -21,6 +21,8 @@
|
|||
#include <utils/types.h>
|
||||
#include <mem/minerva.h>
|
||||
|
||||
#define CFG_SIZE(array) (sizeof(array) / sizeof(cfg_op_t))
|
||||
|
||||
#define NYX_NEW_INFO 0x3058594E
|
||||
|
||||
typedef enum
|
||||
|
|
|
|||
Loading…
Reference in a new issue