mirror of
https://github.com/Atmosphere-NX/Atmosphere
synced 2024-12-23 12:51:13 +00:00
73 lines
2.8 KiB
Markdown
73 lines
2.8 KiB
Markdown
# BCT.ini
|
|
BCT.ini is the configuration file used by fusée-primary and fusée-secondary. It is read by fusee-primary.bin to setup and boot fusee-secondary.bin and is also read by fusee-secondary.bin to configure Exosphère, specify the environment it should boot, or configure other miscellaneous options such as setting a custom boot splashscreen.
|
|
|
|
## Configuration
|
|
This file is located in the `atmosphere` folder on your SD card. The default configuration file will look similar to this.
|
|
```
|
|
BCT0
|
|
[stage1]
|
|
stage2_path = atmosphere/fusee-secondary.bin
|
|
stage2_addr = 0xF0000000
|
|
stage2_entrypoint = 0xF0000000
|
|
|
|
[exosphere]
|
|
; Note: Disabling debugmode will cause parts of ams.tma to not work, in the future.
|
|
debugmode = 1
|
|
debugmode_user = 0
|
|
|
|
[stratosphere]
|
|
; To force-enable nogc, add nogc = 1
|
|
; To force-disable nogc, add nogc = 0
|
|
```
|
|
|
|
## Adding a Custom Boot Splashscreen
|
|
Add the following lines to BCT.ini and change the value of `custom_splash` to the actual path and filename of your boot splashscreen.
|
|
```
|
|
[stage2]
|
|
custom_splash = /path/to/your/bootlogo.bmp
|
|
```
|
|
|
|
The boot splashscreen must be a BMP file, it must be 720x1280 (1280x720 rotated 90 degrees left/counterclockwise/anti-clockwise) resolution, and be in 32-bit ARGB format. You can use image editing software such as GIMP or Photoshop to export the image in this format.
|
|
|
|
## Configuring "nogc" Protection
|
|
Nogc is a feature provided by fusée-secondary which disables the Nintendo Switch's Game Card reader. Its purpose is to prevent the reader from being updated when the console has been updated without burning fuses from a firmware lower than 4.0.0, to a newer firmware that is at least 4.0.0 or higher. By default, Atmosphère will protect the Game Card reader automatically, but you are free to change it.
|
|
|
|
To change its functionality, add the following line to the `stratosphere` section and change the value of `X` according to the following list.
|
|
```
|
|
nogc = X
|
|
```
|
|
```
|
|
1 = force-enable nogc, so Atmosphère will always disable the Game Card reader.
|
|
0 = force-disable nogc, so Atmosphère will always enable the Game Card reader.
|
|
```
|
|
|
|
|
|
## Changing Target Firmware
|
|
Add the following line to the `exosphere` section and replace the `X` according to the following list if you have trouble booting past the firmware version detection.
|
|
`target_firmware` is the OFW major version.
|
|
```
|
|
target_firmware = X
|
|
```
|
|
```
|
|
1.0.0 = 1
|
|
2.X.X = 2
|
|
3.X.X = 3
|
|
4.X.X = 4
|
|
5.X.X = 5
|
|
6.X.X = 6
|
|
6.2.0 = 7
|
|
7.X.X = 8
|
|
```
|
|
|
|
Note that 6.X.X indicates 6.0.0 through 6.1.0.
|
|
|
|
## Configuring Debugging Modes
|
|
By default, Atmosphère signals to the Horizon kernel that debugging is enabled while leaving usermode debugging disabled, since this can cause undesirable side-effects. If you wish to change these behaviours, go to the `exosphere` section and change the value of `X` according to the following list.
|
|
```
|
|
debugmode = X
|
|
debugmode_user = X
|
|
```
|
|
```
|
|
1 = enable
|
|
0 = disable
|
|
```
|