nold/Atmosphere
1
0
Fork 0
mirror of https://github.com/Atmosphere-NX/Atmosphere synced 2024-09-19 22:59:00 +00:00
Code Issues Packages Projects Releases Wiki Activity
842 commits 41 branches 81 tags 30 MiB
Commit graph

294 commits

Author SHA1 Message Date
Traiver 57819fa345
Update kernel_patches.c 2018-06-17 14:02:08 +02:00
Traiver 0295c8a51d
Update kernel_patches.c 2018-06-17 12:38:57 +02:00
Traiver b211a7cf05
add kernel patches for 4.1.0 2018-06-17 11:00:42 +02:00
DavidBuchanan314 20a721a4a6 fusee: correct 4.x free_code_space_offset value 2018-06-13 22:26:00 +01:00
DavidBuchanan314 58d2f8f0a5 fusee: Add 3.0.0-3.0.1 kernel hash (and free_code_space_offset) 2018-06-13 22:08:18 +01:00
Tomasz Moń 206c10f333 Rework sdmmc clocking configuration 
Use 204 MHz as host clock in SDR104 mode instead of 136 MHz.
Due to this, also change the frequency init divider so the
initialization frequency is below 400 kHz.
This makes the clocks for SDMMC1 in all modes to match the TRM table.

Make it clear in the code that HS200/HS400 modes in fact use PLLP_OUT0
and not PLLC4_OUT2_LJ like the comment suggest. In fact selecting the
PLLC4_OUT2_LJ as clock source results in freeze after switching to
HS200/HS400 mode. This is most likely related to the PLLC4 not being
enabled, but it should be checked later.

Set the HS200/HS400 divider to 3, as this is what the code really did
set prior to this change - so this commit does not change that.

Configure Legacy 12 MHz clock to run at 12 MHz using the SW default
configuration (as per TRM) for the SDMMC legacy timer.

Introduce initial version of sdmmc_host_clock_delay() in order to use it
in places where the wait is host clock dependent. The way it is
implemented now does not change the sleep that was used instead.
 2018-06-12 17:20:15 +02:00
Max K d8c9399cff fusee: Run periodic autocal only on the uSD controller (#137) 2018-06-10 21:09:48 -07:00
hexkyz ceb93867b4
Merge pull request #132 from tslater2006/master 
Add sdmmc_dump_regs function
 2018-06-10 16:21:18 +01:00
Tomasz Moń 804a40830e Fix race conditions and misconfiguration in sdmmc 
Properly configure pull up and pull down offsets for autocal.
Run autocal prior to every transfer.

Prevent race conditions in sdmmc_wait_for_event() - make sure the fault
handler has highest priority, then the target irq, state conditions and
finally the error mask.

Do not clear all bits (|=) when acknowledging fault conditions,
only acknowledge the fault conditions itself.

Enable interrupts before preparing command registers - if sdmmc is fast
enough it can actually finish transfer before we enabled the interrupts.
Enabling interrupts clears the COMMAND COMPLETE status bit.

Temporarily print all the sdmmc messages in stage2 - for yet unknown
reason respecting the log level results in some failures.

This results in working microsd card in stage2 on my switch with Samsung
EVO+ 256GB microsd card.
 2018-06-09 17:37:53 +02:00
Timothy Slater a79d3454d8 Switched to mmc_debug, and use inttypes 2018-06-08 07:50:36 -05:00
Timothy Slater 7df8ca7c4b use printf instead of printk for secondary 2018-06-07 13:05:41 -05:00
Timothy Slater ca907077af Add sdmmc_dump_regs function 2018-06-07 12:55:29 -05:00
Tomasz Moń 7b9dcd2f1a Make sdmmc autocalibration follow TRM procedure 
Sleep for 1 us, not 1 ms.
Timeout after 10 ms, set driver strength code values according to TRM.

Fix typo (mS) - time is in milliseconds, not milliSiemens.
 2018-06-05 19:07:14 +02:00
TuxSH 0491a21a99 Fix logic bug in stage2's main function 2018-06-05 16:18:02 +02:00
Max K 6b7da2887f package2 verification and ini1 merging fixes (#125) 
* fusee: Incremet offset while reading kip1s

* fusee: Pass package2 section data along with the decrypted metadata
 2018-06-04 14:04:44 -07:00
TuxSH b2139ed182 Pass screen status and mmc struct from stage1 to 2 2018-06-04 19:17:23 +02:00
hexkyz 7e5fda86b2
Merge pull request #114 from desowin/sdmmc-errata 
Set SDMMC controller to SDR104 as a workaround
 2018-06-04 16:20:19 +01:00
langerhans 41429e9120 fusee: Add kernel hash for 4.x 2018-06-03 16:59:21 +02:00
Michael Scire 968c86578a Fusee: Add 5.x kernel patches to allow for IPC PID mitm. 2018-06-02 20:01:44 -06:00
Michael Scire cc69079d73 Fusee: Add mechanism for branching back at end of hook. 2018-06-02 19:11:50 -06:00
Max K 8ec3a53d73 Fix CCPLEX bringup and halt the BPMP once it's done booting. (#118) 2018-06-02 17:24:02 -07:00
Michael Scire b3a7086b7e Fusee: Add infrastructure for applying kernel patches (needed for mitm) 2018-06-02 16:06:31 -06:00
Michael Scire 1ba8a92030 Fusee: Separate kernel patching into its own file. 2018-06-02 16:06:31 -06:00
Tomasz Moń 0534e36cf8 Set SDMMC controller to SDR104 as a workaround 
According to Tegra X1 Series Processors Silicon Errata there is possible
misalignment of received data which results in a CRC error. The issue is
present only in SDR50 mode.
 2018-05-27 17:43:25 +02:00
TuxSH c9723d7b68 Refactor fusee's makefile 2018-05-27 00:59:02 +02:00
TuxSH d57f4c54a9 Fix mmc->allow_voltage_switching assignment in sdmmc_init 2018-05-24 17:39:36 +02:00
TuxSH 4d43a86b60 Copy latest sdmmc driver to stage2 2018-05-24 01:17:13 +02:00
TuxSH fd77e5543e Add debug comment for exosphère 2018-05-23 18:46:39 +02:00
TuxSH 16ad355f45 Unstub "Validate section hashes." 2018-05-23 18:45:53 +02:00
Kate J. Temkin eaf8e559d6 fusee: work around some dual-init SDMMC issues 2018-05-23 07:47:02 -06:00
TuxSH a4b1cf8b50 Stage1: fix SE issue too 2018-05-21 21:18:30 +02:00
Michael Scire c64d7904b4 Fusee: Fix se_calculate_sha256 2018-05-21 13:07:46 -06:00
TuxSH 561fa90669 Use uintX_t for the SE & copy bugfixed SE struct definition 2018-05-21 19:05:00 +02:00
TuxSH f39622c421 Stage2: Fix bug, add more debug printfs to nxboot. The CCPLEX doesn't turn on 2018-05-21 18:42:42 +02:00
TuxSH 5920f5a4b0 Stage2: fix various bugs in package2.c 2018-05-21 18:18:12 +02:00
TuxSH ffd0b5df6a Fix bug in stratosphere_get_ini1, etc. 2018-05-21 17:45:05 +02:00
TuxSH 0e9a304533 stage2: package2: bypass hash checks for now 2018-05-21 17:42:10 +02:00
TuxSH ecb83903c0 Stage1: fix potential alignment issue 2018-05-21 14:18:03 +02:00
Kate J. Temkin ac7ee45493 fusee: improve SDR104 frequency and support AUTOCMD23 2018-05-21 04:24:50 -06:00
TuxSH bf2c6dff25 Stage2: Add exception handlers 2018-05-21 03:50:53 +02:00
TuxSH c1687905a3 Fix stack overflow when chainloading stage2 2018-05-21 03:42:05 +02:00
TuxSH ea2693dd2d Fix exception handlers (thanks @fincs) 2018-05-21 03:39:18 +02:00
TuxSH 43d1816ac2 [stage1] Add exception handlers... which somehow don't work? 2018-05-21 02:24:41 +02:00
TuxSH 83d9d874e6 Fusee use CAR reboot for fatal errors 2018-05-20 23:52:09 +02:00
TuxSH 4ec7d0fc82 Remove packed when not needed 2018-05-20 22:57:25 +02:00
TuxSH 57ff5e694a Don't check for panics in stage2 2018-05-20 22:00:11 +02:00
TuxSH 3dd6ec5f6c wtf pmc reboot doesn't fully work -- display doesn't reinitialize 2018-05-20 16:56:15 +02:00
TuxSH f45bc83bc4 Introduce fatal_error 2018-05-20 16:18:48 +02:00
Kate J. Temkin add03d5774 fusee: correct computation of tuning block size 2018-05-20 07:21:49 -06:00
Kate J. Temkin d5411b5b1f fusee: begin adding support for MMC HS modes 2018-05-20 07:05:35 -06:00
Kate J. Temkin 5f3fc8156c fusee: SD: implement tuning, allowing for all SD UHS-I speed 2018-05-20 07:05:35 -06:00
Kate J. Temkin 38350e769c fusee: SD driver: implement everything necessary for UHS except tuning 2018-05-20 07:05:35 -06:00
Kate J. Temkin 633c5e95ed fusee: correct constants in CAR 2018-05-20 07:05:35 -06:00
Kate J. Temkin 817c42efc2 fusee: handle SDMMC speeds sanely 2018-05-20 07:05:35 -06:00
TuxSH ec7e0d923d Add custom panic driver 2018-05-20 14:11:46 +02:00
TuxSH c820375a86 Make struct tegra_pmc not packed 2018-05-20 01:40:23 +02:00
TuxSH 64cdd2e63f Actually don't use memcpy in sdmmc 2018-05-19 03:10:06 +02:00
TuxSH 2a98e2e3b8 Sync sdmmc changes between stage1 and 2 2018-05-19 02:50:50 +02:00
TuxSH 2bc2fe1452 Use memcpy instead of raw casts in sdmmc.c 2018-05-19 01:33:07 +02:00
TuxSH b4eeddd7e1 Revamp all the Makefiles (thanks @fincs @WinterMute) 
... dependencies are now properly handled (e.g. header changes, etc.)
 2018-05-19 01:07:27 +02:00
Kate J. Temkin 7bfdf63a71 fusee sdmmc: don't time out on long reads 2018-05-18 07:43:09 -06:00
TuxSH e0a5acd0ba [stage2] Add more debugging printfs to package2.c, etc. 2018-05-18 00:24:06 +02:00
TuxSH 993db7ee95 Fix nxboot mkey rev misconception 2018-05-18 00:11:44 +02:00
TuxSH ec6d05892c Refactor nxboot package2 reading, work around sdmmc issue, other changes 2018-05-17 23:18:33 +02:00
TuxSH 9ed2f92cdc [stage2] Fix some FS bugs 2018-05-17 19:53:42 +02:00
TuxSH 3dac6c9268 Fix bug in fusee: package2.c, etc. 2018-05-17 16:11:10 +02:00
TuxSH 1b07a07353 Fusee: Change package2 loading logic (untested) 2018-05-17 15:56:02 +02:00
Michael Scire 5088851de4 Fusee: fix unused var 2018-05-17 07:15:55 -06:00
Michael Scire bb1dcb2655 Fusee: Implement BIS crypto functions. 2018-05-17 07:15:29 -06:00
TuxSH 5631b27449 Fix out-of-bounds partition r/w bugs in raw_dev.c 2018-05-17 14:39:16 +02:00
TuxSH 858b40e5fb GPT entry LBA range is inclusive 2018-05-17 14:38:19 +02:00
TuxSH 85bfbeccc3 Fix latest commit 2018-05-17 02:07:11 +02:00
TuxSH 52d2af86b6 Fix BCT version parsing 2018-05-17 01:54:19 +02:00
TuxSH 9309b0bed5 Don't overflow devoptabs, etc. 2018-05-17 01:53:32 +02:00
TuxSH 468a063c03 Load the appropriate package1 key. The warmboot fw is now properly read. 2018-05-16 23:19:55 +02:00
TuxSH 348b2457e0 Fix key derivation regression 2018-05-16 23:04:54 +02:00
TuxSH c71e7c8c2e [stage2] Add "hexdump" 2018-05-16 19:59:14 +02:00
TuxSH 0d5796fa0b Align crypto buffers to 16 bytes in key_derivation.c 2018-05-16 19:57:36 +02:00
TuxSH ab4518b9c1 Simplify some logic in derive_nx_keydata 2018-05-16 18:41:16 +02:00
TuxSH c0617982b8 Fix typo in decrypting all keyblobs (thanks @tslater2006 !) 2018-05-16 16:45:44 +02:00
Michael Scire 1182ea23a5 Fusee: Fix typo when decrypting keyblobs. 2018-05-16 02:39:13 -06:00
Michael Scire fa71e9cb15 Fusee: Decrypt all keyblobs during key derivation. 2018-05-16 02:06:59 -06:00
TuxSH f84645e91f Simplify package1_get_encrypted_package1 2018-05-16 02:55:48 +02:00
TuxSH 34a658ce4c Fix package1_read_and_parse_boot0 
Key derivation is now working
 2018-05-16 01:46:08 +02:00
TuxSH db929925f3 Fix TSEC key fetching, thanks to @rajkosto 2018-05-16 00:37:07 +02:00
TuxSH 6c50723209 Fix tsec.c (thanks @rajkosto @tslater2006), fixes #106 2018-05-15 23:59:20 +02:00
TuxSH 9a86ffec68 Fix diskio.c, etc. 2018-05-15 23:54:33 +02:00
TuxSH 42fd4f73cf Remove stray debug printf in gpt.c 2018-05-15 22:10:45 +02:00
TuxSH 60dbc7c9d7 ┬┴┬┴┤( ͡° ͜ʖ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌├┬┴┬┴ 2018-05-15 21:08:57 +02:00
Luke Street f5ab896343 [stage2] Invert a few checks 2018-05-15 14:40:18 -04:00
TuxSH 62ebf20e25 Fix typo in nxboot.c 2018-05-15 20:24:37 +02:00
TuxSH 1288f54965 Finish writing stratosphere_get_ini1 2018-05-15 19:50:20 +02:00
TuxSH 3c0436b98f Write more code for stratosphere_get_ini1, make it and its caller take target_firmware 2018-05-15 16:09:06 +02:00
TuxSH 4e1a368b43 Write more of stratosphere_get_ini1 2018-05-15 12:38:07 +02:00
TuxSH af2de57fdc Embed exosphere, thermosphere, loader, pm, sm into fusee-secondary 
Still needs boot and boot2 to be built as proper KIPs
 2018-05-15 02:45:31 +02:00
TuxSH d9c2a54464 Make a top-level make build everything in order 2018-05-15 01:30:56 +02:00
TuxSH 172a2b679c Fix strncpy bugs in fusée, etc. 2018-05-15 01:18:05 +02:00
TuxSH 15bba0ba0c Make loadlist empty when booting Horizon, more nxboot.c code 2018-05-14 21:17:06 +02:00
TuxSH c2b22a6bf2 Write all the needed pk1 code and a large part of the nxboot function 2018-05-14 02:40:35 +02:00
TuxSH 17f4a17d17 [stage2] Add debug printf in main.c 2018-05-14 00:06:48 +02:00