nold/Atmosphere
1
0
Fork 0
mirror of https://github.com/Atmosphere-NX/Atmosphere synced 2024-09-19 22:59:00 +00:00
Code Issues Packages Projects Releases Wiki Activity
1149 commits 41 branches 81 tags 30 MiB
Commit graph

264 commits

Author SHA1 Message Date
Resaec d2355cdc9b
add the ability to print without adding a prefix for multi part/line prints 2018-09-25 23:43:52 +02:00
Resaec 1eb3d7969e
changes to fit the codestyle 
improved a comment
removed unused code and imports
 2018-09-24 00:02:58 +02:00
Resaec 8cc266174d
change all print* calls to use the new print with a log_level 2018-09-23 23:22:25 +02:00
Resaec 7548c8ecfa
rather call the files log.c and log.h 
changed LOG_LEVEL order
export only externaly used functions
add todos
 2018-09-23 23:18:41 +02:00
Resaec 840242b68e started on centralized printing/logging 
some character problems with "atmosphère" and such strings
 2018-09-22 05:14:43 +02:00
hexkyz f622eac36e fusee: Finish implementing support for 6.0.0 2018-09-20 20:02:10 +01:00
hexkyz f864b0835d fusee: Add support for firmware version 6.0.0. 
fusee: Implement splash screen rendering.
fusee: Add minor notes and update lz library.
 2018-09-17 21:03:03 +01:00
hexkyz 39d812f434 fusee: Move nxboot hand-off to IRAM. 
fusee/exosphere: Minor cleanup.
 2018-09-15 21:08:58 +01:00
Michael Scire d61ec20679 fusee: add fs.mitm kernel patches for 6.0.0 2018-09-10 15:54:14 -07:00
hexkyz 28e4d4411d Add and fix copyright notices for better GPL compliance (thanks @naehrwert and @CTCaer). 2018-09-07 16:00:13 +01:00
hexkyz 2f8edfa8e2 fusee: Minor bugfixes. 2018-09-05 20:51:03 +01:00
hexkyz ad4605abde
fusee: Fix a bug in cluster boot code. 2018-09-04 19:16:03 +01:00
hexkyz 5542352239
fusee: Fix CAR registers' definition. 2018-09-04 19:14:29 +01:00
hexkyz 8007480a15
fusee: Re-enable built-in PM system module. 2018-09-03 18:48:01 +01:00
hexkyz abf57d2e43
fusee: Unmount *after* reading the splash screen. 2018-08-31 22:52:31 +00:00
hexkyz 58a42be38f
fusee: Comment out splash screen delay. 2018-08-31 22:46:08 +00:00
hexkyz 97d1ca3cc9
fusee: Disable built-in PM system module. 2018-08-31 20:10:06 +00:00
hexkyz 3cf37330ca fusee: Disable AHB redirection when necessary. 
fusee: Add 3.0.0/3.0.1/3.0.2 warmboot fix.
 2018-08-30 19:49:33 +01:00
hexkyz 611e85e6ee fusee: Implement BootConfig and Boot Reason handling. 2018-08-29 18:28:21 +01:00
hexkyz 8edec43be2 fusee: Add automatic firmware version detection. 2018-08-23 19:57:01 +01:00
hexkyz e5bfb95c22 fusee: Add warmboot support. 2018-08-19 17:09:30 +01:00
hexkyz 320ec38be1 fusee: Complete re-write of the hardware initialization code: 
- Updated code to match hekate's;
- Improved nxboot (now boots firmwares 2.x successfully);
- Temporarily disabled built-in boot system module support;
- Fixed multiple bugs.
 2018-08-18 17:59:33 +01:00
hexkyz 6eac78595e
fusee-secondary: Remove restriction for loading from eMMC 2018-08-01 21:15:16 +01:00
Lioncash 4b8455baf9 fusee-secondary: Correct else-if condition in xmemmove() 
Previously both the if and else conditions were the same.
 2018-07-29 20:53:01 -07:00
Lioncash bbdf2868c9 fusee-secondary/fs_dev: Correct uninitialized cast within fsdev_seek() 
Previously this was casting the same unassigned variable that was being
assigned to.
 2018-07-29 20:15:44 -07:00
Luke Street a3d53fbb2c Define wait() in fusee-primary/secondary 2018-07-29 10:53:06 -07:00
hexkyz 054c65dffb
Revert unnecessary change (thanks @rajkosto) 2018-07-26 19:26:43 +01:00
hexkyz 7836609839 Fix multiple issues reported by Coverity Scan 2018-07-26 18:45:18 +01:00
hexkyz fd88bd1d2c
fusee: Disable the SDCLK when switching to low voltage. 2018-07-24 19:06:41 +01:00
hexkyz e58927a8ab fusee: Fix SDMMC high speed support and other bugs. 2018-07-23 20:14:53 +01:00
hexkyz 3db9ce32fa Fusee: Deployed new SDMMC driver in fusee-secondary. All stages boot now. 
Fusee: Fixed wrong argument in se.c function.
Fusee: Improved timers.
 2018-07-19 21:07:53 +01:00
hexkyz 3394f0cf0d
Merge pull request #161 from TheDgtl/fix_4xx_kernel 
Fix issue with fusee-secondary 4.x kernel patches
 2018-07-04 22:06:11 +01:00
hexkyz c5e9aec013 fusee: Temporarily disable anything that prevents the fusee-primary to fusee-secondary transition. 2018-07-04 22:04:41 +01:00
Drakia 6ab81e1780 Fix issue with fusee-secondary 4.x kernel patches 2018-07-01 17:50:02 -07:00
Benoit7413 0f6d4baa8e
Replace NAND by eMMC 
Using NAND doens't really make sense
 2018-06-26 08:49:50 +02:00
Michael Scire 9687218fbc Fusee: lfs kernel patches for 3.0.0/3.0.2 2018-06-24 16:24:22 -06:00
Michael Scire 1252c4d5e1 Fusee: Complete hashes (Thanks @Thog), lfs patches for 2.0.0 2018-06-24 15:51:29 -06:00
Michael Scire 040cfa90d3 Fusee: Add kernel patches for 1.0.0. 2018-06-24 15:20:16 -06:00
Drakia a446aca2c4 Fix a few issues in the secondary kernel_patches.c file 2018-06-17 19:28:19 -07:00
hexkyz fca9ed2a15
Merge pull request #145 from Traiver/master 
fusee: Add 4.1.0 kernel patch definitions
 2018-06-17 16:56:36 +01:00
Traiver 33af704ee2
Update kernel_patches.c 2018-06-17 15:54:06 +02:00
Traiver 57819fa345
Update kernel_patches.c 2018-06-17 14:02:08 +02:00
Traiver 0295c8a51d
Update kernel_patches.c 2018-06-17 12:38:57 +02:00
Traiver b211a7cf05
add kernel patches for 4.1.0 2018-06-17 11:00:42 +02:00
DavidBuchanan314 20a721a4a6 fusee: correct 4.x free_code_space_offset value 2018-06-13 22:26:00 +01:00
DavidBuchanan314 58d2f8f0a5 fusee: Add 3.0.0-3.0.1 kernel hash (and free_code_space_offset) 2018-06-13 22:08:18 +01:00
Tomasz Moń 206c10f333 Rework sdmmc clocking configuration 
Use 204 MHz as host clock in SDR104 mode instead of 136 MHz.
Due to this, also change the frequency init divider so the
initialization frequency is below 400 kHz.
This makes the clocks for SDMMC1 in all modes to match the TRM table.

Make it clear in the code that HS200/HS400 modes in fact use PLLP_OUT0
and not PLLC4_OUT2_LJ like the comment suggest. In fact selecting the
PLLC4_OUT2_LJ as clock source results in freeze after switching to
HS200/HS400 mode. This is most likely related to the PLLC4 not being
enabled, but it should be checked later.

Set the HS200/HS400 divider to 3, as this is what the code really did
set prior to this change - so this commit does not change that.

Configure Legacy 12 MHz clock to run at 12 MHz using the SW default
configuration (as per TRM) for the SDMMC legacy timer.

Introduce initial version of sdmmc_host_clock_delay() in order to use it
in places where the wait is host clock dependent. The way it is
implemented now does not change the sleep that was used instead.
 2018-06-12 17:20:15 +02:00
Max K d8c9399cff fusee: Run periodic autocal only on the uSD controller (#137) 2018-06-10 21:09:48 -07:00
hexkyz ceb93867b4
Merge pull request #132 from tslater2006/master 
Add sdmmc_dump_regs function
 2018-06-10 16:21:18 +01:00
Tomasz Moń 804a40830e Fix race conditions and misconfiguration in sdmmc 
Properly configure pull up and pull down offsets for autocal.
Run autocal prior to every transfer.

Prevent race conditions in sdmmc_wait_for_event() - make sure the fault
handler has highest priority, then the target irq, state conditions and
finally the error mask.

Do not clear all bits (|=) when acknowledging fault conditions,
only acknowledge the fault conditions itself.

Enable interrupts before preparing command registers - if sdmmc is fast
enough it can actually finish transfer before we enabled the interrupts.
Enabling interrupts clears the COMMAND COMPLETE status bit.

Temporarily print all the sdmmc messages in stage2 - for yet unknown
reason respecting the log level results in some failures.

This results in working microsd card in stage2 on my switch with Samsung
EVO+ 256GB microsd card.
 2018-06-09 17:37:53 +02:00
Timothy Slater a79d3454d8 Switched to mmc_debug, and use inttypes 2018-06-08 07:50:36 -05:00
Timothy Slater 7df8ca7c4b use printf instead of printk for secondary 2018-06-07 13:05:41 -05:00
Timothy Slater ca907077af Add sdmmc_dump_regs function 2018-06-07 12:55:29 -05:00
Tomasz Moń 7b9dcd2f1a Make sdmmc autocalibration follow TRM procedure 
Sleep for 1 us, not 1 ms.
Timeout after 10 ms, set driver strength code values according to TRM.

Fix typo (mS) - time is in milliseconds, not milliSiemens.
 2018-06-05 19:07:14 +02:00
TuxSH 0491a21a99 Fix logic bug in stage2's main function 2018-06-05 16:18:02 +02:00
Max K 6b7da2887f package2 verification and ini1 merging fixes (#125) 
* fusee: Incremet offset while reading kip1s

* fusee: Pass package2 section data along with the decrypted metadata
 2018-06-04 14:04:44 -07:00
TuxSH b2139ed182 Pass screen status and mmc struct from stage1 to 2 2018-06-04 19:17:23 +02:00
hexkyz 7e5fda86b2
Merge pull request #114 from desowin/sdmmc-errata 
Set SDMMC controller to SDR104 as a workaround
 2018-06-04 16:20:19 +01:00
langerhans 41429e9120 fusee: Add kernel hash for 4.x 2018-06-03 16:59:21 +02:00
Michael Scire 968c86578a Fusee: Add 5.x kernel patches to allow for IPC PID mitm. 2018-06-02 20:01:44 -06:00
Michael Scire cc69079d73 Fusee: Add mechanism for branching back at end of hook. 2018-06-02 19:11:50 -06:00
Max K 8ec3a53d73 Fix CCPLEX bringup and halt the BPMP once it's done booting. (#118) 2018-06-02 17:24:02 -07:00
Michael Scire b3a7086b7e Fusee: Add infrastructure for applying kernel patches (needed for mitm) 2018-06-02 16:06:31 -06:00
Michael Scire 1ba8a92030 Fusee: Separate kernel patching into its own file. 2018-06-02 16:06:31 -06:00
Tomasz Moń 0534e36cf8 Set SDMMC controller to SDR104 as a workaround 
According to Tegra X1 Series Processors Silicon Errata there is possible
misalignment of received data which results in a CRC error. The issue is
present only in SDR50 mode.
 2018-05-27 17:43:25 +02:00
TuxSH c9723d7b68 Refactor fusee's makefile 2018-05-27 00:59:02 +02:00
TuxSH d57f4c54a9 Fix mmc->allow_voltage_switching assignment in sdmmc_init 2018-05-24 17:39:36 +02:00
TuxSH 4d43a86b60 Copy latest sdmmc driver to stage2 2018-05-24 01:17:13 +02:00
TuxSH fd77e5543e Add debug comment for exosphère 2018-05-23 18:46:39 +02:00
TuxSH 16ad355f45 Unstub "Validate section hashes." 2018-05-23 18:45:53 +02:00
Michael Scire c64d7904b4 Fusee: Fix se_calculate_sha256 2018-05-21 13:07:46 -06:00
TuxSH 561fa90669 Use uintX_t for the SE & copy bugfixed SE struct definition 2018-05-21 19:05:00 +02:00
TuxSH f39622c421 Stage2: Fix bug, add more debug printfs to nxboot. The CCPLEX doesn't turn on 2018-05-21 18:42:42 +02:00
TuxSH 5920f5a4b0 Stage2: fix various bugs in package2.c 2018-05-21 18:18:12 +02:00
TuxSH ffd0b5df6a Fix bug in stratosphere_get_ini1, etc. 2018-05-21 17:45:05 +02:00
TuxSH 0e9a304533 stage2: package2: bypass hash checks for now 2018-05-21 17:42:10 +02:00
TuxSH bf2c6dff25 Stage2: Add exception handlers 2018-05-21 03:50:53 +02:00
TuxSH 83d9d874e6 Fusee use CAR reboot for fatal errors 2018-05-20 23:52:09 +02:00
TuxSH 4ec7d0fc82 Remove packed when not needed 2018-05-20 22:57:25 +02:00
TuxSH 57ff5e694a Don't check for panics in stage2 2018-05-20 22:00:11 +02:00
TuxSH 3dd6ec5f6c wtf pmc reboot doesn't fully work -- display doesn't reinitialize 2018-05-20 16:56:15 +02:00
TuxSH f45bc83bc4 Introduce fatal_error 2018-05-20 16:18:48 +02:00
TuxSH ec7e0d923d Add custom panic driver 2018-05-20 14:11:46 +02:00
TuxSH c820375a86 Make struct tegra_pmc not packed 2018-05-20 01:40:23 +02:00
TuxSH 64cdd2e63f Actually don't use memcpy in sdmmc 2018-05-19 03:10:06 +02:00
TuxSH 2a98e2e3b8 Sync sdmmc changes between stage1 and 2 2018-05-19 02:50:50 +02:00
TuxSH 2bc2fe1452 Use memcpy instead of raw casts in sdmmc.c 2018-05-19 01:33:07 +02:00
TuxSH b4eeddd7e1 Revamp all the Makefiles (thanks @fincs @WinterMute) 
... dependencies are now properly handled (e.g. header changes, etc.)
 2018-05-19 01:07:27 +02:00
TuxSH e0a5acd0ba [stage2] Add more debugging printfs to package2.c, etc. 2018-05-18 00:24:06 +02:00
TuxSH 993db7ee95 Fix nxboot mkey rev misconception 2018-05-18 00:11:44 +02:00
TuxSH ec6d05892c Refactor nxboot package2 reading, work around sdmmc issue, other changes 2018-05-17 23:18:33 +02:00
TuxSH 9ed2f92cdc [stage2] Fix some FS bugs 2018-05-17 19:53:42 +02:00
TuxSH 3dac6c9268 Fix bug in fusee: package2.c, etc. 2018-05-17 16:11:10 +02:00
TuxSH 1b07a07353 Fusee: Change package2 loading logic (untested) 2018-05-17 15:56:02 +02:00
Michael Scire 5088851de4 Fusee: fix unused var 2018-05-17 07:15:55 -06:00
Michael Scire bb1dcb2655 Fusee: Implement BIS crypto functions. 2018-05-17 07:15:29 -06:00
TuxSH 5631b27449 Fix out-of-bounds partition r/w bugs in raw_dev.c 2018-05-17 14:39:16 +02:00
TuxSH 858b40e5fb GPT entry LBA range is inclusive 2018-05-17 14:38:19 +02:00
TuxSH 85bfbeccc3 Fix latest commit 2018-05-17 02:07:11 +02:00
TuxSH 52d2af86b6 Fix BCT version parsing 2018-05-17 01:54:19 +02:00