nold/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate synced 2024-11-08 12:56:36 +00:00
Code Issues Projects Releases Packages Wiki Activity
840 commits 2 branches 75 tags 6.9 MiB
Commit graph

346 commits

Author SHA1 Message Date
CTCaer
d287d40208 hos: Add HOS 11.0.0 support 2020-12-02 02:41:32 +02:00
CTCaer
2aa1ce5390 nyx: Add eMMC and SD vendor id decoding into names 2020-12-02 02:11:22 +02:00
CTCaer
cf175fc00d nyx: Add alternate power saving modes 
T210:
By default max power savings is enabled.
By changing `newpowersave=` to 0, it reverts to the old behavior of smaller power savings.

This was added to mitigate some strange DRAM chips, hanging from constant frequency change of a 800 MHz - 1600 MHz back and forth.

T210B01:
Defaults to a simple loop with no power savings. That's because of untrained ram.
 2020-12-02 02:07:31 +02:00
CTCaer
0954eb2b09 nyx: Use full shutdown based reboot on T210B01 
That's because of how the system is exploited.
 2020-12-02 01:45:12 +02:00
CTCaer
2424ecc4f0 Disable coreboot.rom chainloading for T210B01 
Unlike all RCM payloads that are based on hekate's hwinit, coreboot does full power management before sdram init is run.

Because of that and because it doesn't support T210B01, it does not hang as expected and configures all regulators and pins which can be dangerous!
 2020-12-02 00:57:32 +02:00
CTCaer
495907b8a4 sept: Mark as ready for Mariko 2020-07-04 21:36:37 +03:00
CTCaer
f9a1935762 nyx: Fix Dump pkg1/pkg2 and cal0 for Mariko 2020-07-04 21:36:04 +03:00
CTCaer
8ef9f888f6 hos: Add PK21 decryption support for Mariko 2020-07-04 21:35:26 +03:00
CTCaer
9b3e9724b7 hos: Add Mariko PK11 decryption and unpacking 2020-07-04 21:32:36 +03:00
CTCaer
8880dfab24 eks: Disallow on Mariko 2020-07-04 21:21:48 +03:00
CTCaer
5ffbbf40a5 hos: Add Mariko keygen 2020-07-04 21:13:25 +03:00
CTCaer
7acad84932 nyx: Disable TSEC keys status for T210B01 2020-07-04 21:04:57 +03:00
CTCaer
8d2230dc51 fuse: Correct fuse array size for T210B01 2020-07-04 21:04:20 +03:00
CTCaer
e4c0756ded nyx: Add DRAM names info + Mariko new ram codes 2020-06-26 22:41:34 +03:00
CTCaer
1c9efa327c Correct RCM patched status for Mariko 
This also disallows AutoRCM for Mariko.
 2020-06-26 22:40:06 +03:00
CTCaer
cabaa6cfb8 Utilize BIT macro everywhere 2020-11-26 01:41:45 +02:00
CTCaer
e45ffab5d8 Remove stray hekate cfg set. It's handled by default. 2020-11-15 14:00:35 +02:00
CTCaer
55568b037f nyx: Properly calculate Ranks and Channels in hw info 2020-11-15 13:50:19 +02:00
CTCaer
b5df428e43 nyx: Create bootloader folder on screenshots if missing 2020-11-15 13:47:47 +02:00
CTCaer
67a03bbd85 eks: Use LOT0 for identification 2020-11-15 13:43:22 +02:00
CTCaer
32955380c7 nyx: Fix icons for backup/restore swap 2020-11-15 13:40:53 +02:00
CTCaer
485edb4883 emc: Rename Device to Rank 2020-11-15 13:23:37 +02:00
CTCaer
8f222fd0bd main: Fix update.bin creation on first boot 2020-10-27 21:27:51 +02:00
CTCaer
1f5b371608 Refactor some names 
Additionally:
- Do not retry to init sd if all modes failed in Nyx.
- Do not try to read/write if sdmmc controller and card are not initialized.
 2020-10-23 06:32:24 +03:00
CTCaer
ce156ab4e7 hos: Automate some eks and bis checks 2020-10-20 11:53:28 +03:00
CTCaer
94235dd005 bm92t30: Add proper info 
The driver will now show more charger supported profiles and will also show selected profile.
 2020-10-20 10:42:57 +03:00
CTCaer
27b1f0e843 Various small fixes 2020-10-20 10:32:32 +03:00
CTCaer
dae7be8ec4 nyx: Allow disabling of Joycon 
Setting `jcdisable=1` in nyx.ini disables the usage of Joycon completely.

This also disables the BT pairing data dumping tool.
 2020-10-20 10:21:48 +03:00
CTCaer
2f5b52223c config: Add bootloader protection 
`bootprotect=1` enables protection of the `bootloader` folder inside HOS.

This disallows any reading/writing of the folder and its contents inside HOS, preventing any corruption of it.

This of course has the side-effect of homebrew that depend on it (e.g. hekate Toolbox) to not work fully.
 2020-10-20 10:16:12 +03:00
CTCaer
e3e5dab0fc nyx: Add USB Charger info 2020-09-15 20:14:56 +03:00
CTCaer
e7900b11b4 nyx: Allow L4T last part to be unaligned 2020-09-02 13:11:03 +03:00
CTCaer
461d14c39a di: Correct panel id for AUO A062TAN02 2020-08-28 05:26:18 +03:00
CTCaer
3d05b58856 nyx: Add eMMC NAND cells life estimation 2020-08-15 12:33:11 +03:00
CTCaer
78c4e6510d hos: Add backup bootloader support 2020-08-15 12:30:18 +03:00
CTCaer
cd76d5ac09 nyx: Fix hang on using B button after Launch window 2020-08-15 12:22:01 +03:00
CTCaer
9c2a064817 nyx: Allow SD removal without reloading Nyx 2020-08-15 12:21:25 +03:00
CTCaer
db2da89f69 nyx: Remove delay on JC calibration 
This does not help with drifting as the logged values are always changing drastically.
 2020-08-15 12:19:43 +03:00
CTCaer
4fc420616d nyx: Control UART debug completely via makefile 
Also enables LvGL log.
 2020-08-13 10:21:00 +03:00
CTCaer
5140992a7b nyx: Add proper info about SD write protect 2020-07-19 20:56:08 +03:00
CTCaer
b8ca88ee0a exo: Change fatal names and add stack overflow 2020-07-18 12:53:05 +03:00
CTCaer
adfa7c0780 fuse: Use fuse count function for burnt fuses 2020-07-18 01:15:28 +03:00
CTCaer
11df6030f9 Various fixes 2020-07-18 00:54:35 +03:00
CTCaer
32e58d2bb3 hw init: Cosmetic refactoring 2020-07-17 18:08:27 +03:00
CTCaer
638a3909c5 Refactor various variables and names 2020-07-17 18:00:32 +03:00
CTCaer
3c2d86ef7b sdmmc: Add protected area info (Content Protection) 2020-07-17 17:01:40 +03:00
CTCaer
f559017aeb di: Update display panels and info 2020-07-17 16:57:45 +03:00
CTCaer
3ddd1c26ad pkg1: Fix PK11 component split in pkg1/2 dump tool 2020-07-14 23:29:48 +03:00
CTCaer
ab5b59e10d Refactor fatal/hard error names 2020-07-14 22:41:48 +03:00
CTCaer
1f67251331 nyx: Use strcat whenever possible 2020-07-14 22:26:40 +03:00
CTCaer
4eecdfa553 nyx: Add decrypted CAL0 dumping 2020-07-14 21:16:52 +03:00