CTCaer
b5df428e43
nyx: Create bootloader folder on screenshots if missing
2020-11-15 13:47:47 +02:00
CTCaer
67a03bbd85
eks: Use LOT0 for identification
2020-11-15 13:43:22 +02:00
CTCaer
32955380c7
nyx: Fix icons for backup/restore swap
2020-11-15 13:40:53 +02:00
CTCaer
485edb4883
emc: Rename Device to Rank
2020-11-15 13:23:37 +02:00
CTCaer
8f222fd0bd
main: Fix update.bin creation on first boot
2020-10-27 21:27:51 +02:00
CTCaer
1f5b371608
Refactor some names
...
Additionally:
- Do not retry to init sd if all modes failed in Nyx.
- Do not try to read/write if sdmmc controller and card are not initialized.
2020-10-23 06:32:24 +03:00
CTCaer
ce156ab4e7
hos: Automate some eks and bis checks
2020-10-20 11:53:28 +03:00
CTCaer
94235dd005
bm92t30: Add proper info
...
The driver will now show more charger supported profiles and will also show selected profile.
2020-10-20 10:42:57 +03:00
CTCaer
27b1f0e843
Various small fixes
2020-10-20 10:32:32 +03:00
CTCaer
dae7be8ec4
nyx: Allow disabling of Joycon
...
Setting `jcdisable=1` in nyx.ini disables the usage of Joycon completely.
This also disables the BT pairing data dumping tool.
2020-10-20 10:21:48 +03:00
CTCaer
2f5b52223c
config: Add bootloader protection
...
`bootprotect=1` enables protection of the `bootloader` folder inside HOS.
This disallows any reading/writing of the folder and its contents inside HOS, preventing any corruption of it.
This of course has the side-effect of homebrew that depend on it (e.g. hekate Toolbox) to not work fully.
2020-10-20 10:16:12 +03:00
CTCaer
85d43147ee
Bump hekate to v5.3.3 and Nyx to v0.9.4
2020-09-15 20:24:56 +03:00
CTCaer
e3e5dab0fc
nyx: Add USB Charger info
2020-09-15 20:14:56 +03:00
CTCaer
e7900b11b4
nyx: Allow L4T last part to be unaligned
2020-09-02 13:11:03 +03:00
CTCaer
461d14c39a
di: Correct panel id for AUO A062TAN02
2020-08-28 05:26:18 +03:00
CTCaer
3d05b58856
nyx: Add eMMC NAND cells life estimation
2020-08-15 12:33:11 +03:00
CTCaer
78c4e6510d
hos: Add backup bootloader support
2020-08-15 12:30:18 +03:00
CTCaer
cd76d5ac09
nyx: Fix hang on using B button after Launch window
2020-08-15 12:22:01 +03:00
CTCaer
9c2a064817
nyx: Allow SD removal without reloading Nyx
2020-08-15 12:21:25 +03:00
CTCaer
db2da89f69
nyx: Remove delay on JC calibration
...
This does not help with drifting as the logged values are always changing drastically.
2020-08-15 12:19:43 +03:00
CTCaer
4fc420616d
nyx: Control UART debug completely via makefile
...
Also enables LvGL log.
2020-08-13 10:21:00 +03:00
CTCaer
5140992a7b
nyx: Add proper info about SD write protect
2020-07-19 20:56:08 +03:00
CTCaer
b8ca88ee0a
exo: Change fatal names and add stack overflow
2020-07-18 12:53:05 +03:00
CTCaer
adfa7c0780
fuse: Use fuse count function for burnt fuses
2020-07-18 01:15:28 +03:00
CTCaer
11df6030f9
Various fixes
2020-07-18 00:54:35 +03:00
CTCaer
45ca2938f5
pmc: Move rail power function to its own object
2020-07-18 00:42:53 +03:00
CTCaer
32e58d2bb3
hw init: Cosmetic refactoring
2020-07-17 18:08:27 +03:00
CTCaer
638a3909c5
Refactor various variables and names
2020-07-17 18:00:32 +03:00
CTCaer
3c2d86ef7b
sdmmc: Add protected area info (Content Protection)
2020-07-17 17:01:40 +03:00
CTCaer
f559017aeb
di: Update display panels and info
2020-07-17 16:57:45 +03:00
CTCaer
3ddd1c26ad
pkg1: Fix PK11 component split in pkg1/2 dump tool
2020-07-14 23:29:48 +03:00
CTCaer
ab5b59e10d
Refactor fatal/hard error names
2020-07-14 22:41:48 +03:00
CTCaer
1f67251331
nyx: Use strcat whenever possible
2020-07-14 22:26:40 +03:00
CTCaer
4eecdfa553
nyx: Add decrypted CAL0 dumping
2020-07-14 21:16:52 +03:00
CTCaer
80dd0f1580
joycon: Skip first 4 packets for calibration
2020-07-14 21:13:37 +03:00
CTCaer
4e0c70a402
nyx: Do not timeout joycon with screenshot
...
Additionally, screenshots are allowed only every 2s instead per second.
2020-07-14 21:12:09 +03:00
CTCaer
ffd5a198f9
Beautify make size prints
2020-07-14 20:56:56 +03:00
CTCaer
ddc89c9f49
hos: Reduce size of pkg1 id array
2020-06-22 12:04:49 +03:00
CTCaer
3214fc2f93
nyx: Fix validation check for emuMMC restore
...
When checking a partition for enough size for emuMMC restore, always check against the extra 16MB.
2020-06-18 01:23:06 +03:00
CTCaer
3b0925b912
touch: Check if init failed and stop parsing if yes
2020-06-17 00:41:37 +03:00
CTCaer
c5f032fcb2
Fix building on msys2
2020-06-16 12:41:42 +03:00
CTCaer
564f36fc8b
hos: Fix mkey validation on BIS derivation
2020-06-15 17:31:29 +03:00
CTCaer
6159284be6
nyx: Check for huge files in part manager backup
2020-06-15 15:05:47 +03:00
CTCaer
9afc6f0a4e
joycon: Add bigger deadzone for virtual mouse
2020-06-15 15:04:46 +03:00
CTCaer
f689bb253e
nyx: Add simple CAL0 info
2020-06-15 15:03:14 +03:00
CTCaer
0738c96867
nyx: Fix pkg1/2 dumping with new changes
2020-06-15 15:01:18 +03:00
CTCaer
edba8ca986
hos: Add BIS keys derivation
2020-06-15 14:59:45 +03:00
CTCaer
2aa9055fae
Various fixes
2020-06-15 14:58:50 +03:00
CTCaer
029d66bd95
Fix build for lvgl UART log
2020-06-14 17:33:57 +03:00
CTCaer
c73b4ad6ba
nyx: Include Hoag as Mariko in fuses info
2020-06-14 16:51:06 +03:00
CTCaer
6e256d29c7
Utilize hekate's BDK for hekate main and Nyx
2020-06-14 16:45:45 +03:00
CTCaer
185526d134
Introducing Bootloader Development Kit (BDK)
...
BDK will allow developers to use the full collection of drivers,
with limited editing, if any, for making payloads for Nintendo Switch.
Using a single source for everything will also help decoupling
Switch specific code and easily port it to other Tegra X1/X1+ platforms.
And maybe even to lower targets.
Everything is now centrilized into bdk folder.
Every module or project can utilize it by simply including it.
This is just the start and it will continue to improve.
2020-06-14 15:25:21 +03:00
CTCaer
9b1c61fbcf
storage: Add cal0 struct
2020-06-14 14:11:15 +03:00
CTCaer
ae7ef7d79a
fuse: Add get odm keygen type
2020-06-14 14:10:29 +03:00
CTCaer
273f11cd59
sdram: Extend sdram id
2020-06-14 14:07:21 +03:00
CTCaer
f5092bc981
heap: Add heap object copy
2020-06-14 14:02:13 +03:00
CTCaer
d607a8830b
hos: Support new sept/exo keyslots
2020-06-14 13:53:21 +03:00
CTCaer
92d013dd65
eks: Upgrade to new version and support BIS keys
2020-06-14 13:42:48 +03:00
CTCaer
242bbdada5
storage: Better BIS support
...
It now supports more than one crypto block and keys are expected to slot 0 and up to slot 5.
2020-06-14 13:36:36 +03:00
CTCaer
d90f5b7e7c
ccplex: Renable cluster object to ccplex in makefile
2020-06-14 13:34:13 +03:00
CTCaer
d95449c22d
usb: Fix some issues with usb descriptors
2020-06-14 13:33:13 +03:00
CTCaer
4d8dbe068d
sept: Remove support for obsolete no _00/01 suffix
2020-06-14 13:25:08 +03:00
CTCaer
157e415636
uart: Decreases timeouts to reduce latency
2020-06-14 13:21:59 +03:00
CTCaer
48f84c5cf4
gpio: Remove dependency to irq driver
2020-06-14 13:20:56 +03:00
CTCaer
1d3d1c8454
clock: Prevent PLLC4 from glitching
2020-06-14 13:19:53 +03:00
CTCaer
bb2b339b54
ianos: Remove sd (un)mount usage
2020-06-14 13:17:26 +03:00
CTCaer
5790c585f5
nyx: Reduce idle power draw by 280mW
2020-06-14 13:14:32 +03:00
CTCaer
a2655912d4
nyx: Auto center cursor based on its size
2020-06-14 13:13:27 +03:00
CTCaer
e2c905e9b2
joycon: More robust spi dumping for bd addr/ltk
2020-06-14 13:13:04 +03:00
CTCaer
9619417b07
nyx: Allow arc bits tool to work on all compat folders
2020-06-14 13:09:10 +03:00
CTCaer
b0bcdeafac
nyx: Find best cluster size automatically
2020-06-14 13:07:42 +03:00
CTCaer
7b76015fd1
nyx: Fix an issue with hos partition initial size
2020-06-14 13:07:21 +03:00
CTCaer
465955c8f5
nyx: Use sd actual size for partition making
2020-06-14 13:06:43 +03:00
CTCaer
90a759b98e
Use reconfig workaround for power off and reboots
2020-06-14 13:05:51 +03:00
CTCaer
0096b91146
Add corrupted bmp protection
2020-06-14 13:04:13 +03:00
CTCaer
125f000894
nyx: Use date/time for screenshot names
...
Now that RTC clock can be offset in software it's good to have actual dates on screenshots.
2020-06-14 13:02:54 +03:00
CTCaer
f9a0e6ce4f
nyx: Show clock edit on boot if 0 offset
2020-06-14 13:00:55 +03:00
CTCaer
0d5a1416d0
nyx: Show SD card total blocks in info
2020-06-14 12:59:41 +03:00
CTCaer
43f3132069
nyx: Do not show SFD partitions as valid for emuMMC
2020-06-14 12:53:35 +03:00
CTCaer
3d00a1be21
nyx: Support multiple backup based emuMMC
2020-06-14 12:52:54 +03:00
CTCaer
87ce09f4b1
Some fixes
2020-06-14 12:50:54 +03:00
CTCaer
31f90a0a47
se: Fix CBC encryption
2020-06-14 03:10:30 +03:00
CTCaer
af30904624
se: Simplify oneshot execute calls
2020-06-14 03:10:04 +03:00
CTCaer
f2f995af17
se: Allow sha256 continuation without saving the msg
2020-06-14 03:08:27 +03:00
CTCaer
3dcd2ad15f
hos: Header for pkg2 is now more proper
2020-06-14 02:23:02 +03:00
CTCaer
eb2c8a032f
power: Enable charger unconditionally
2020-06-14 02:04:50 +03:00
CTCaer
416db840ec
power: Refactor max17050 driver
2020-06-14 02:03:43 +03:00
CTCaer
b0c4cef077
power: Fix max77621 DVS voltage reg names
2020-06-14 02:02:26 +03:00
CTCaer
58d12e5754
power: Refactor bq24193 driver
2020-06-14 02:01:26 +03:00
CTCaer
bcda64a5df
tsec: Decouple hos header dependency
2020-06-14 01:32:54 +03:00
CTCaer
ba77de3dc5
exo: Refactor exo_cfg context to exo_ctx
2020-06-14 01:29:41 +03:00
CTCaer
53325617bb
hos: Small refactoring
2020-06-14 01:27:08 +03:00
CTCaer
8e836d958f
Rename cluster to ccplex
2020-06-14 01:09:17 +03:00
CTCaer
8ce6bf82a9
Minimize make info noise during building
2020-06-13 18:39:17 +03:00
CTCaer
21548545fc
Equalize hekate main and Nyx sd based functions
2020-06-13 18:32:40 +03:00
CTCaer
7dd3178d48
Equalize hekate main and Nyx common functions
2020-06-13 18:16:29 +03:00
Dave Murphy
cc54df87d7
fixes for compiling with gcc 10
...
gcc 10 no longer lets you get away with not externing global variables in header files. This adds the necessary extern and adds defines in appropriate c files
2020-05-08 23:32:44 +01:00
CTCaer
9698cbc9d7
nyx: Fix archive bits fixer and extention folders
2020-05-05 21:24:28 +03:00
CTCaer
d8b6aa3831
nyx: Correct the error message for format
2020-05-05 19:28:34 +03:00
CTCaer
3e5ef39686
nyx: Fix emummc slider when there's not enough space
2020-05-05 19:28:15 +03:00