nyx: Add alternate power saving modes

T210:
By default max power savings is enabled.
By changing `newpowersave=` to 0, it reverts to the old behavior of smaller power savings.

This was added to mitigate some strange DRAM chips, hanging from constant frequency change of a 800 MHz - 1600 MHz back and forth.

T210B01:
Defaults to a simple loop with no power savings. That's because of untrained ram.

nyx/nyx_gui/config.c

@@ -64,6 +64,7 @@ void set_nyx_default_configuration()
 	n_cfg.verification = 1;
 	n_cfg.ums_emmc_rw = 0;
 	n_cfg.jc_disable = 0;
+	n_cfg.new_powersave = 1;
 }
 
 int create_config_entry()
@@ -205,6 +206,9 @@ int create_nyx_config_entry()
 	f_puts("\njcdisable=", &fp);
 	itoa(n_cfg.jc_disable, lbuf, 10);
 	f_puts(lbuf, &fp);
+	f_puts("\nnewpowersave=", &fp);
+	itoa(n_cfg.new_powersave, lbuf, 10);
+	f_puts(lbuf, &fp);
 	f_puts("\n", &fp);
 
 	f_close(&fp);

nyx/nyx_gui/config.h

@@ -51,6 +51,7 @@ typedef struct _nyx_config
 	u32 verification;
 	u32 ums_emmc_rw;
 	u32 jc_disable;
+	u32 new_powersave;
 } nyx_config;
 
 void set_default_configuration();

nyx/nyx_gui/frontend/gui.c

@@ -2235,6 +2235,30 @@ static void _nyx_main_menu(lv_theme_t * th)
 	}
 }
 
+static void _nyx_gui_loop_powersave_ram()
+{
+	// Saves 280 mW.
+	while (true)
+	{
+		minerva_change_freq(FREQ_1600);  // Takes 295 us.
+
+		lv_task_handler();
+
+		minerva_change_freq(FREQ_800);   // Takes 80 us.
+	}
+}
+
+static void _nyx_gui_loop_powersave_cpu()
+{
+	// Saves 75 mW.
+	while (true)
+	{
+		lv_task_handler();
+
+		bpmp_usleep(HALT_COP_MAX_CNT);   // Takes 200 us.
+	}
+}
+
 void nyx_load_and_run()
 {
 	memset(&system_tasks, 0, sizeof(system_maintenance_tasks_t));
@@ -2293,13 +2317,15 @@ void nyx_load_and_run()
 		lv_task_once(task_run_sd_errors);
 	}
 
-	while (true)
+	// Gui loop.
+	if (h_cfg.t210b01)
 	{
-		minerva_change_freq(FREQ_1600);  // Takes 295us.
+		// Minerva not supported on T210B01 yet. No power saving.
-
+		while (true)
-		lv_task_handler();
+			lv_task_handler();
-
-		minerva_change_freq(FREQ_800);   // Takes 80us. Saves 280mW.
-		//bpmp_usleep(HALT_COP_MAX_CNT); // Taskes 200us. Saves 75mW.
 	}
+	else if (n_cfg.new_powersave)
+		_nyx_gui_loop_powersave_ram(); // Alternate DRAM frequencies. Higher power savings.
+	else
+		_nyx_gui_loop_powersave_cpu(); // Suspend CPU. Lower power savings.
 }

nyx/nyx_gui/nyx.c

@@ -280,6 +280,8 @@ void load_saved_configuration()
 						n_cfg.ums_emmc_rw = atoi(kv->val) == 1;
 					else if (!strcmp("jcdisable", kv->key))
 						n_cfg.jc_disable = atoi(kv->val) == 1;
+					else if (!strcmp("newpowersave", kv->key))
+						n_cfg.new_powersave = atoi(kv->val) == 1;
 				}
 
 				break;