clock: Move PLLC config from bpmp.c to clock.c

This commit is contained in:
CTCaer 2020-01-07 06:46:22 +02:00
parent 009db77426
commit c99a87dd09
6 changed files with 104 additions and 64 deletions

View file

@ -253,30 +253,8 @@ void bpmp_clk_rate_set(bpmp_freq_t fid)
msleep(1); // Wait a bit for clock source change.
}
// Take PLLC out of reset and set basic misc parameters.
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC) =
((CLOCK(CLK_RST_CONTROLLER_PLLC_MISC) & 0xFFF0000F) & ~PLLC_MISC_RESET) | (0x80000 << 4); // PLLC_EXT_FRU.
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC_2) |= 0xF0 << 8; // PLLC_FLL_LD_MEM.
// Disable PLL and IDDQ in case they are on.
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) &= ~PLLCX_BASE_ENABLE;
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC_1) &= ~PLLC_MISC1_IDDQ;
usleep(10);
// Set PLLC4 dividers.
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) = 4 | (pll_divn[fid] << 10); // DIVM: 4, DIVP: 1.
// Enable PLLC4 and wait for Phase and Frequency lock.
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) |= PLLCX_BASE_ENABLE;
while (!(CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) & PLLCX_BASE_LOCK))
;
// Disable PLLC_OUT1, enable reset and set div to 1.5.
CLOCK(CLK_RST_CONTROLLER_PLLC_OUT) = (1 << 8);
// Enable PLLC_OUT1 and bring it out of reset.
CLOCK(CLK_RST_CONTROLLER_PLLC_OUT) |= (PLLC_OUT1_CLKEN | PLLC_OUT1_RSTN_CLR);
msleep(1); // Wait a bit for clock source change.
// Configure and enable PLLC.
clock_enable_pllc(pll_divn[fid]);
// Set SCLK / HCLK / PCLK.
CLOCK(CLK_RST_CONTROLLER_CLK_SYSTEM_RATE) = 3; // PCLK = HCLK / (3 + 1). HCLK == SCLK.
@ -288,13 +266,8 @@ void bpmp_clk_rate_set(bpmp_freq_t fid)
msleep(1); // Wait a bit for clock source change.
CLOCK(CLK_RST_CONTROLLER_CLK_SYSTEM_RATE) = 2; // PCLK = HCLK / (2 + 1). HCLK == SCLK.
// Disable PLLC and PLLC_OUT1.
CLOCK(CLK_RST_CONTROLLER_PLLC_OUT) &= ~(PLLC_OUT1_CLKEN | PLLC_OUT1_RSTN_CLR);
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) &= ~PLLCX_BASE_ENABLE;
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) |= PLLCX_BASE_REF_DIS;
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC_1) |= PLLC_MISC1_IDDQ;
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC) |= PLLC_MISC_RESET;
usleep(10);
// Disable PLLC to save power.
clock_disable_pllc();
}
bpmp_clock_set = fid;
}

View file

@ -228,6 +228,51 @@ void clock_disable_pwm()
clock_disable(&_clock_pwm);
}
void clock_enable_pllc(u32 divn)
{
u8 pll_divn_curr = (CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) >> 10) & 0xFF;
// Check if already enabled and configured.
if ((CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) & PLLCX_BASE_ENABLE) && (pll_divn_curr == divn))
return;
// Take PLLC out of reset and set basic misc parameters.
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC) =
((CLOCK(CLK_RST_CONTROLLER_PLLC_MISC) & 0xFFF0000F) & ~PLLC_MISC_RESET) | (0x80000 << 4); // PLLC_EXT_FRU.
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC_2) |= 0xF0 << 8; // PLLC_FLL_LD_MEM.
// Disable PLL and IDDQ in case they are on.
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) &= ~PLLCX_BASE_ENABLE;
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC_1) &= ~PLLC_MISC1_IDDQ;
usleep(10);
// Set PLLC4 dividers.
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) = 4 | (divn << 10); // DIVM: 4, DIVP: 1.
// Enable PLLC4 and wait for Phase and Frequency lock.
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) |= PLLCX_BASE_ENABLE;
while (!(CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) & PLLCX_BASE_LOCK))
;
// Disable PLLC_OUT1, enable reset and set div to 1.5.
CLOCK(CLK_RST_CONTROLLER_PLLC_OUT) = (1 << 8);
// Enable PLLC_OUT1 and bring it out of reset.
CLOCK(CLK_RST_CONTROLLER_PLLC_OUT) |= (PLLC_OUT1_CLKEN | PLLC_OUT1_RSTN_CLR);
msleep(1); // Wait a bit for clock source change.
}
void clock_disable_pllc()
{
// Disable PLLC and PLLC_OUT1.
CLOCK(CLK_RST_CONTROLLER_PLLC_OUT) &= ~(PLLC_OUT1_CLKEN | PLLC_OUT1_RSTN_CLR);
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) &= ~PLLCX_BASE_ENABLE;
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) |= PLLCX_BASE_REF_DIS;
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC_1) |= PLLC_MISC1_IDDQ;
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC) |= PLLC_MISC_RESET;
usleep(10);
}
#define L_SWR_SDMMC1_RST (1 << 14)
#define L_SWR_SDMMC2_RST (1 << 9)
#define L_SWR_SDMMC4_RST (1 << 15)

View file

@ -190,6 +190,8 @@ void clock_enable_coresight();
void clock_disable_coresight();
void clock_enable_pwm();
void clock_disable_pwm();
void clock_enable_pllc(u32 divn);
void clock_disable_pllc();
void clock_sdmmc_config_clock_source(u32 *pout, u32 id, u32 val);
void clock_sdmmc_get_card_clock_div(u32 *pout, u16 *pdivisor, u32 type);
int clock_sdmmc_is_not_reset_and_enabled(u32 id);

View file

@ -253,30 +253,8 @@ void bpmp_clk_rate_set(bpmp_freq_t fid)
msleep(1); // Wait a bit for clock source change.
}
// Take PLLC out of reset and set basic misc parameters.
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC) =
((CLOCK(CLK_RST_CONTROLLER_PLLC_MISC) & 0xFFF0000F) & ~PLLC_MISC_RESET) | (0x80000 << 4); // PLLC_EXT_FRU.
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC_2) |= 0xF0 << 8; // PLLC_FLL_LD_MEM.
// Disable PLL and IDDQ in case they are on.
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) &= ~PLLCX_BASE_ENABLE;
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC_1) &= ~PLLC_MISC1_IDDQ;
usleep(10);
// Set PLLC4 dividers.
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) = 4 | (pll_divn[fid] << 10); // DIVM: 4, DIVP: 1.
// Enable PLLC4 and wait for Phase and Frequency lock.
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) |= PLLCX_BASE_ENABLE;
while (!(CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) & PLLCX_BASE_LOCK))
;
// Disable PLLC_OUT1, enable reset and set div to 1.5.
CLOCK(CLK_RST_CONTROLLER_PLLC_OUT) = (1 << 8);
// Enable PLLC_OUT1 and bring it out of reset.
CLOCK(CLK_RST_CONTROLLER_PLLC_OUT) |= (PLLC_OUT1_CLKEN | PLLC_OUT1_RSTN_CLR);
msleep(1); // Wait a bit for clock source change.
// Configure and enable PLLC.
clock_enable_pllc(pll_divn[fid]);
// Set SCLK / HCLK / PCLK.
CLOCK(CLK_RST_CONTROLLER_CLK_SYSTEM_RATE) = 3; // PCLK = HCLK / (3 + 1). HCLK == SCLK.
@ -288,13 +266,8 @@ void bpmp_clk_rate_set(bpmp_freq_t fid)
msleep(1); // Wait a bit for clock source change.
CLOCK(CLK_RST_CONTROLLER_CLK_SYSTEM_RATE) = 2; // PCLK = HCLK / (2 + 1). HCLK == SCLK.
// Disable PLLC and PLLC_OUT1.
CLOCK(CLK_RST_CONTROLLER_PLLC_OUT) &= ~(PLLC_OUT1_CLKEN | PLLC_OUT1_RSTN_CLR);
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) &= ~PLLCX_BASE_ENABLE;
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) |= PLLCX_BASE_REF_DIS;
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC_1) |= PLLC_MISC1_IDDQ;
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC) |= PLLC_MISC_RESET;
usleep(10);
// Disable PLLC to save power.
clock_disable_pllc();
}
bpmp_clock_set = fid;
}

View file

@ -228,6 +228,51 @@ void clock_disable_pwm()
clock_disable(&_clock_pwm);
}
void clock_enable_pllc(u32 divn)
{
u8 pll_divn_curr = (CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) >> 10) & 0xFF;
// Check if already enabled and configured.
if ((CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) & PLLCX_BASE_ENABLE) && (pll_divn_curr == divn))
return;
// Take PLLC out of reset and set basic misc parameters.
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC) =
((CLOCK(CLK_RST_CONTROLLER_PLLC_MISC) & 0xFFF0000F) & ~PLLC_MISC_RESET) | (0x80000 << 4); // PLLC_EXT_FRU.
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC_2) |= 0xF0 << 8; // PLLC_FLL_LD_MEM.
// Disable PLL and IDDQ in case they are on.
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) &= ~PLLCX_BASE_ENABLE;
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC_1) &= ~PLLC_MISC1_IDDQ;
usleep(10);
// Set PLLC4 dividers.
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) = 4 | (divn << 10); // DIVM: 4, DIVP: 1.
// Enable PLLC4 and wait for Phase and Frequency lock.
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) |= PLLCX_BASE_ENABLE;
while (!(CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) & PLLCX_BASE_LOCK))
;
// Disable PLLC_OUT1, enable reset and set div to 1.5.
CLOCK(CLK_RST_CONTROLLER_PLLC_OUT) = (1 << 8);
// Enable PLLC_OUT1 and bring it out of reset.
CLOCK(CLK_RST_CONTROLLER_PLLC_OUT) |= (PLLC_OUT1_CLKEN | PLLC_OUT1_RSTN_CLR);
msleep(1); // Wait a bit for clock source change.
}
void clock_disable_pllc()
{
// Disable PLLC and PLLC_OUT1.
CLOCK(CLK_RST_CONTROLLER_PLLC_OUT) &= ~(PLLC_OUT1_CLKEN | PLLC_OUT1_RSTN_CLR);
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) &= ~PLLCX_BASE_ENABLE;
CLOCK(CLK_RST_CONTROLLER_PLLC_BASE) |= PLLCX_BASE_REF_DIS;
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC_1) |= PLLC_MISC1_IDDQ;
CLOCK(CLK_RST_CONTROLLER_PLLC_MISC) |= PLLC_MISC_RESET;
usleep(10);
}
#define L_SWR_SDMMC1_RST (1 << 14)
#define L_SWR_SDMMC2_RST (1 << 9)
#define L_SWR_SDMMC4_RST (1 << 15)

View file

@ -190,6 +190,8 @@ void clock_enable_coresight();
void clock_disable_coresight();
void clock_enable_pwm();
void clock_disable_pwm();
void clock_enable_pllc(u32 divn);
void clock_disable_pllc();
void clock_sdmmc_config_clock_source(u32 *pout, u32 id, u32 val);
void clock_sdmmc_get_card_clock_div(u32 *pout, u16 *pdivisor, u32 type);
int clock_sdmmc_is_not_reset_and_enabled(u32 id);