mirror of
https://github.com/CTCaer/hekate
synced 2024-12-22 11:21:23 +00:00
i2c: Refactor
This commit is contained in:
CTCaer
parent
9686eaf3f1
commit
b20a0e74c2
2 changed files with 116 additions and 60 deletions
153
bdk/soc/i2c.c
153
bdk/soc/i2c.c
|
|
@ -20,31 +20,85 @@
|
|||
#include <soc/i2c.h>
|
||||
#include <utils/util.h>
|
||||
|
||||
#define I2C_PACKET_PROT_I2C (1 << 4)
|
||||
#define I2C_HEADER_IE_ENABLE (1 << 17)
|
||||
#define I2C_HEADER_READ (1 << 19)
|
||||
|
||||
#define I2C_CNFG (0x00 / 4)
|
||||
#define CMD1_WRITE (0 << 6)
|
||||
#define CMD1_READ (1 << 6)
|
||||
#define NORMAL_MODE_GO (1 << 9)
|
||||
#define PACKET_MODE_GO (1 << 10)
|
||||
#define NEW_MASTER_FSM (1 << 11)
|
||||
#define DEBOUNCE_CNT_4T (2 << 12)
|
||||
#define I2C_CMD_ADDR0 (0x04 / 4)
|
||||
#define ADDR0_WRITE 0
|
||||
#define ADDR0_READ 1
|
||||
#define I2C_CMD_DATA1 (0x0C / 4)
|
||||
#define I2C_CMD_DATA2 (0x10 / 4)
|
||||
#define I2C_STATUS (0x1C / 4)
|
||||
#define I2C_STATUS_NOACK (0xF << 0)
|
||||
#define I2C_STATUS_BUSY (1 << 8)
|
||||
#define I2C_TX_FIFO (0x50 / 4)
|
||||
#define I2C_RX_FIFO (0x54 / 4)
|
||||
#define I2C_FIFO_CONTROL (0x5C / 4)
|
||||
#define RX_FIFO_FLUSH (1 << 0)
|
||||
#define TX_FIFO_FLUSH (1 << 1)
|
||||
#define I2C_FIFO_STATUS (0x60 / 4)
|
||||
#define RX_FIFO_FULL_CNT (0xF << 0)
|
||||
#define TX_FIFO_EMPTY_CNT (0xF << 4)
|
||||
#define I2C_INT_EN (0x64 / 4)
|
||||
#define I2C_INT_STATUS (0x68 / 4)
|
||||
#define I2C_INT_SOURCE (0x70 / 4)
|
||||
#define RX_FIFO_DATA_REQ (1 << 0)
|
||||
#define TX_FIFO_DATA_REQ (1 << 1)
|
||||
#define ARB_LOST (1 << 2)
|
||||
#define NO_ACK (1 << 3)
|
||||
#define RX_FIFO_UNDER (1 << 4)
|
||||
#define TX_FIFO_OVER (1 << 5)
|
||||
#define ALL_PACKETS_COMPLETE (1 << 6)
|
||||
#define PACKET_COMPLETE (1 << 7)
|
||||
#define BUS_CLEAR_DONE (1 << 11)
|
||||
#define I2C_CLK_DIVISOR (0x6C / 4)
|
||||
#define I2C_BUS_CLEAR_CONFIG (0x84 / 4)
|
||||
#define BC_ENABLE (1 << 0)
|
||||
#define BC_TERMINATE (1 << 1)
|
||||
#define I2C_BUS_CLEAR_STATUS (0x88 / 4)
|
||||
#define I2C_CONFIG_LOAD (0x8C / 4)
|
||||
#define MSTR_CONFIG_LOAD (1 << 0)
|
||||
#define TIMEOUT_CONFIG_LOAD (1 << 2)
|
||||
|
||||
static const u32 i2c_addrs[] = {
|
||||
0x7000C000, 0x7000C400, 0x7000C500,
|
||||
0x7000C700, 0x7000D000, 0x7000D100
|
||||
0x7000C000, // I2C_1.
|
||||
0x7000C400, // I2C_2.
|
||||
0x7000C500, // I2C_3.
|
||||
0x7000C700, // I2C_4.
|
||||
0x7000D000, // I2C_5.
|
||||
0x7000D100 // I2C_6.
|
||||
};
|
||||
|
||||
static void _i2c_wait(vu32 *base)
|
||||
static void _i2c_load_cfg_wait(vu32 *base)
|
||||
{
|
||||
base[I2C_CONFIG_LOAD] = 0x25;
|
||||
base[I2C_CONFIG_LOAD] = (1 << 5) | TIMEOUT_CONFIG_LOAD | MSTR_CONFIG_LOAD;
|
||||
for (u32 i = 0; i < 20; i++)
|
||||
{
|
||||
usleep(1);
|
||||
if (!(base[I2C_CONFIG_LOAD] & 1))
|
||||
if (!(base[I2C_CONFIG_LOAD] & MSTR_CONFIG_LOAD))
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
static int _i2c_send_pkt(u32 idx, u32 x, u8 *buf, u32 size)
|
||||
static int _i2c_send_single(u32 i2c_idx, u32 dev_addr, u8 *buf, u32 size)
|
||||
{
|
||||
if (size > 8)
|
||||
return 0;
|
||||
|
||||
u32 tmp = 0;
|
||||
|
||||
vu32 *base = (vu32 *)i2c_addrs[idx];
|
||||
base[I2C_CMD_ADDR0] = x << 1; //Set x (send mode).
|
||||
vu32 *base = (vu32 *)i2c_addrs[i2c_idx];
|
||||
|
||||
// Set device address and send mode.
|
||||
base[I2C_CMD_ADDR0] = dev_addr << 1 | ADDR0_WRITE;
|
||||
|
||||
if (size > 4)
|
||||
{
|
||||
|
|
@ -60,44 +114,55 @@ static int _i2c_send_pkt(u32 idx, u32 x, u8 *buf, u32 size)
|
|||
base[I2C_CMD_DATA1] = tmp; //Set value.
|
||||
}
|
||||
|
||||
base[I2C_CNFG] = ((size - 1) << 1) | 0x2800; //Set size and send mode.
|
||||
_i2c_wait(base); //Kick transaction.
|
||||
// Set size and send mode.
|
||||
base[I2C_CNFG] = ((size - 1) << 1) | DEBOUNCE_CNT_4T | NEW_MASTER_FSM | CMD1_WRITE;
|
||||
|
||||
base[I2C_CNFG] = (base[I2C_CNFG] & 0xFFFFFDFF) | 0x200;
|
||||
// Load configuration.
|
||||
_i2c_load_cfg_wait(base);
|
||||
|
||||
// Initiate transaction on normal mode.
|
||||
base[I2C_CNFG] = (base[I2C_CNFG] & 0xFFFFF9FF) | NORMAL_MODE_GO;
|
||||
|
||||
u32 timeout = get_tmr_ms() + 100; // Actual for max 8 bytes at 100KHz is 0.74ms.
|
||||
while (base[I2C_STATUS] & 0x100)
|
||||
while (base[I2C_STATUS] & I2C_STATUS_BUSY)
|
||||
{
|
||||
if (get_tmr_ms() > timeout)
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (base[I2C_STATUS] << 28)
|
||||
if (base[I2C_STATUS] & I2C_STATUS_NOACK)
|
||||
return 0;
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
static int _i2c_recv_pkt(u32 idx, u8 *buf, u32 size, u32 x)
|
||||
static int _i2c_recv_single(u32 i2c_idx, u8 *buf, u32 size, u32 dev_addr)
|
||||
{
|
||||
if (size > 8)
|
||||
return 0;
|
||||
|
||||
vu32 *base = (vu32 *)i2c_addrs[idx];
|
||||
base[I2C_CMD_ADDR0] = (x << 1) | 1; // Set x (recv mode).
|
||||
base[I2C_CNFG] = ((size - 1) << 1) | 0x2840; // Set size and recv mode.
|
||||
_i2c_wait(base); // Kick transaction.
|
||||
vu32 *base = (vu32 *)i2c_addrs[i2c_idx];
|
||||
|
||||
base[I2C_CNFG] = (base[I2C_CNFG] & 0xFFFFFDFF) | 0x200;
|
||||
// Set device address and recv mode.
|
||||
base[I2C_CMD_ADDR0] = (dev_addr << 1) | ADDR0_READ;
|
||||
|
||||
// Set size and recv mode.
|
||||
base[I2C_CNFG] = ((size - 1) << 1) | DEBOUNCE_CNT_4T | NEW_MASTER_FSM | CMD1_READ;
|
||||
|
||||
// Load configuration.
|
||||
_i2c_load_cfg_wait(base);
|
||||
|
||||
// Initiate transaction on normal mode.
|
||||
base[I2C_CNFG] = (base[I2C_CNFG] & 0xFFFFF9FF) | NORMAL_MODE_GO;
|
||||
|
||||
u32 timeout = get_tmr_ms() + 100; // Actual for max 8 bytes at 100KHz is 0.74ms.
|
||||
while (base[I2C_STATUS] & 0x100)
|
||||
while (base[I2C_STATUS] & I2C_STATUS_BUSY)
|
||||
{
|
||||
if (get_tmr_ms() > timeout)
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (base[I2C_STATUS] << 28)
|
||||
if (base[I2C_STATUS] & I2C_STATUS_NOACK)
|
||||
return 0;
|
||||
|
||||
u32 tmp = base[I2C_CMD_DATA1]; // Get LS value.
|
||||
|
|
@ -113,60 +178,62 @@ static int _i2c_recv_pkt(u32 idx, u8 *buf, u32 size, u32 x)
|
|||
return 1;
|
||||
}
|
||||
|
||||
void i2c_init(u32 idx)
|
||||
void i2c_init(u32 i2c_idx)
|
||||
{
|
||||
vu32 *base = (vu32 *)i2c_addrs[idx];
|
||||
vu32 *base = (vu32 *)i2c_addrs[i2c_idx];
|
||||
|
||||
base[I2C_CLK_DIVISOR_REGISTER] = 0x50001;
|
||||
base[I2C_BUS_CLEAR_CONFIG] = 0x90003;
|
||||
_i2c_wait(base);
|
||||
base[I2C_CLK_DIVISOR] = (5 << 16) | 1; // SF mode Div: 6, HS mode div: 2.
|
||||
base[I2C_BUS_CLEAR_CONFIG] = (9 << 16) | BC_TERMINATE | BC_ENABLE;
|
||||
|
||||
// Load configuration.
|
||||
_i2c_load_cfg_wait(base);
|
||||
|
||||
for (u32 i = 0; i < 10; i++)
|
||||
{
|
||||
usleep(20000);
|
||||
if (base[INTERRUPT_STATUS_REGISTER] & 0x800)
|
||||
if (base[I2C_INT_STATUS] & BUS_CLEAR_DONE)
|
||||
break;
|
||||
}
|
||||
|
||||
(vu32)base[I2C_BUS_CLEAR_STATUS];
|
||||
base[INTERRUPT_STATUS_REGISTER] = base[INTERRUPT_STATUS_REGISTER];
|
||||
base[I2C_INT_STATUS] = base[I2C_INT_STATUS];
|
||||
}
|
||||
|
||||
int i2c_send_buf_small(u32 idx, u32 x, u32 y, u8 *buf, u32 size)
|
||||
int i2c_recv_buf(u8 *buf, u32 size, u32 i2c_idx, u32 dev_addr)
|
||||
{
|
||||
return _i2c_recv_single(i2c_idx, buf, size, dev_addr);
|
||||
}
|
||||
|
||||
int i2c_send_buf_small(u32 i2c_idx, u32 dev_addr, u32 reg, u8 *buf, u32 size)
|
||||
{
|
||||
u8 tmp[4];
|
||||
|
||||
if (size > 7)
|
||||
return 0;
|
||||
|
||||
tmp[0] = y;
|
||||
tmp[0] = reg;
|
||||
memcpy(tmp + 1, buf, size);
|
||||
|
||||
return _i2c_send_pkt(idx, x, tmp, size + 1);
|
||||
return _i2c_send_single(i2c_idx, dev_addr, tmp, size + 1);
|
||||
}
|
||||
|
||||
int i2c_recv_buf(u8 *buf, u32 size, u32 idx, u32 x)
|
||||
int i2c_recv_buf_small(u8 *buf, u32 size, u32 i2c_idx, u32 dev_addr, u32 reg)
|
||||
{
|
||||
return _i2c_recv_pkt(idx, buf, size, x);
|
||||
}
|
||||
|
||||
int i2c_recv_buf_small(u8 *buf, u32 size, u32 idx, u32 x, u32 y)
|
||||
{
|
||||
int res = _i2c_send_pkt(idx, x, (u8 *)&y, 1);
|
||||
int res = _i2c_send_single(i2c_idx, dev_addr, (u8 *)®, 1);
|
||||
if (res)
|
||||
res = _i2c_recv_pkt(idx, buf, size, x);
|
||||
res = _i2c_recv_single(i2c_idx, buf, size, dev_addr);
|
||||
return res;
|
||||
}
|
||||
|
||||
int i2c_send_byte(u32 idx, u32 x, u32 y, u8 b)
|
||||
int i2c_send_byte(u32 i2c_idx, u32 dev_addr, u32 reg, u8 val)
|
||||
{
|
||||
return i2c_send_buf_small(idx, x, y, &b, 1);
|
||||
return i2c_send_buf_small(i2c_idx, dev_addr, reg, &val, 1);
|
||||
}
|
||||
|
||||
u8 i2c_recv_byte(u32 idx, u32 x, u32 y)
|
||||
u8 i2c_recv_byte(u32 i2c_idx, u32 dev_addr, u32 reg)
|
||||
{
|
||||
u8 tmp = 0;
|
||||
i2c_recv_buf_small(&tmp, 1, idx, x, y);
|
||||
i2c_recv_buf_small(&tmp, 1, i2c_idx, dev_addr, reg);
|
||||
return tmp;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -27,22 +27,11 @@
|
|||
#define I2C_5 4
|
||||
#define I2C_6 5
|
||||
|
||||
#define I2C_CNFG 0x00
|
||||
#define I2C_CMD_ADDR0 0x01
|
||||
#define I2C_CMD_DATA1 0x03
|
||||
#define I2C_CMD_DATA2 0x04
|
||||
#define I2C_STATUS 0x07
|
||||
#define INTERRUPT_STATUS_REGISTER 0x1A
|
||||
#define I2C_CLK_DIVISOR_REGISTER 0x1B
|
||||
#define I2C_BUS_CLEAR_CONFIG 0x21
|
||||
#define I2C_BUS_CLEAR_STATUS 0x22
|
||||
#define I2C_CONFIG_LOAD 0x23
|
||||
|
||||
void i2c_init(u32 idx);
|
||||
int i2c_send_buf_small(u32 idx, u32 x, u32 y, u8 *buf, u32 size);
|
||||
int i2c_recv_buf(u8 *buf, u32 size, u32 idx, u32 x);
|
||||
int i2c_recv_buf_small(u8 *buf, u32 size, u32 idx, u32 x, u32 y);
|
||||
int i2c_send_byte(u32 idx, u32 x, u32 y, u8 b);
|
||||
u8 i2c_recv_byte(u32 idx, u32 x, u32 y);
|
||||
void i2c_init(u32 i2c_idx);
|
||||
int i2c_recv_buf(u8 *buf, u32 size, u32 i2c_idx, u32 dev_addr);
|
||||
int i2c_send_buf_small(u32 i2c_idx, u32 dev_addr, u32 reg, u8 *buf, u32 size);
|
||||
int i2c_recv_buf_small(u8 *buf, u32 size, u32 i2c_idx, u32 dev_addr, u32 reg);
|
||||
int i2c_send_byte(u32 i2c_idx, u32 dev_addr, u32 reg, u8 val);
|
||||
u8 i2c_recv_byte(u32 i2c_idx, u32 dev_addr, u32 reg);
|
||||
|
||||
#endif
|
||||
|
|
|
|||
Loading…
Reference in a new issue