mirror of
https://github.com/CTCaer/hekate
synced 2024-07-06 00:13:29 +00:00
Replace hardcoded values
This commit is contained in:
Kostas Missos
parent
481a3945e8
commit
901f2bb5bd
12
ipl/di.c
12
ipl/di.c
|
|
@ -59,11 +59,11 @@ void display_init()
|
|||
PMC(APBDEV_PMC_IO_DPD2_REQ) = 0x40000000;
|
||||
|
||||
//Config pins.
|
||||
PINMUX_AUX(PINMUX_AUX_NFC_EN) &= 0xFFFFFFEF;
|
||||
PINMUX_AUX(PINMUX_AUX_NFC_INT) &= 0xFFFFFFEF;
|
||||
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) &= 0xFFFFFFEF;
|
||||
PINMUX_AUX(PINMUX_AUX_LCD_BL_EN) &= 0xFFFFFFEF;
|
||||
PINMUX_AUX(PINMUX_AUX_LCD_RST) &= 0xFFFFFFEF;
|
||||
PINMUX_AUX(PINMUX_AUX_NFC_EN) &= ~PINMUX_TRISTATE;
|
||||
PINMUX_AUX(PINMUX_AUX_NFC_INT) &= ~PINMUX_TRISTATE;
|
||||
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) &= ~PINMUX_TRISTATE;
|
||||
PINMUX_AUX(PINMUX_AUX_LCD_BL_EN) &= ~PINMUX_TRISTATE;
|
||||
PINMUX_AUX(PINMUX_AUX_LCD_RST) &= ~PINMUX_TRISTATE;
|
||||
|
||||
gpio_config(GPIO_PORT_I, GPIO_PIN_0 | GPIO_PIN_1, GPIO_MODE_GPIO); //Backlight +-5V.
|
||||
gpio_output_enable(GPIO_PORT_I, GPIO_PIN_0 | GPIO_PIN_1, GPIO_OUTPUT_ENABLE); //Backlight +-5V.
|
||||
|
|
@ -193,7 +193,7 @@ void display_end()
|
|||
|
||||
gpio_config(GPIO_PORT_V, GPIO_PIN_0, GPIO_MODE_SPIO); //Backlight PWM.
|
||||
|
||||
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = (PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) & 0xFFFFFFEF) | 0x10;
|
||||
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = (PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) & ~PINMUX_TRISTATE) | PINMUX_TRISTATE;
|
||||
PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) = (PINMUX_AUX(PINMUX_AUX_LCD_BL_PWM) >> 2) << 2 | 1;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -8,10 +8,8 @@
|
|||
#ifdef _WIN32 /* FatFs development platform */
|
||||
|
||||
#include <windows.h>
|
||||
#include <tchar.h>
|
||||
typedef unsigned __int64 QWORD;
|
||||
|
||||
|
||||
#else /* Embedded platform */
|
||||
|
||||
/* These types MUST be 16-bit or 32-bit */
|
||||
|
|
|
|||
|
|
@ -186,8 +186,8 @@ void config_gpios()
|
|||
PINMUX_AUX(PINMUX_AUX_UART2_TX) = 0;
|
||||
PINMUX_AUX(PINMUX_AUX_UART3_TX) = 0;
|
||||
|
||||
PINMUX_AUX(PINMUX_AUX_GPIO_PE6) = 0x40;
|
||||
PINMUX_AUX(PINMUX_AUX_GPIO_PH6) = 0x40;
|
||||
PINMUX_AUX(PINMUX_AUX_GPIO_PE6) = PINMUX_INPUT_ENABLE;
|
||||
PINMUX_AUX(PINMUX_AUX_GPIO_PH6) = PINMUX_INPUT_ENABLE;
|
||||
|
||||
gpio_config(GPIO_PORT_G, GPIO_PIN_0, GPIO_MODE_GPIO);
|
||||
gpio_config(GPIO_PORT_D, GPIO_PIN_1, GPIO_MODE_GPIO);
|
||||
|
|
|
|||
|
|
@ -20,13 +20,13 @@
|
|||
void pinmux_config_uart(u32 idx)
|
||||
{
|
||||
PINMUX_AUX(PINMUX_AUX_UARTX_RX(idx)) = 0;
|
||||
PINMUX_AUX(PINMUX_AUX_UARTX_TX(idx)) = 0x48;
|
||||
PINMUX_AUX(PINMUX_AUX_UARTX_TX(idx)) = PINMUX_INPUT_ENABLE | PINMUX_PULL_UP;
|
||||
PINMUX_AUX(PINMUX_AUX_UARTX_RTS(idx)) = 0;
|
||||
PINMUX_AUX(PINMUX_AUX_UARTX_CTS(idx)) = 0x44;
|
||||
PINMUX_AUX(PINMUX_AUX_UARTX_CTS(idx)) = PINMUX_INPUT_ENABLE | PINMUX_PULL_DOWN;
|
||||
}
|
||||
|
||||
void pinmux_config_i2c(u32 idx)
|
||||
{
|
||||
PINMUX_AUX(PINMUX_AUX_X_I2C_SCL(idx)) = 0x40;
|
||||
PINMUX_AUX(PINMUX_AUX_X_I2C_SDA(idx)) = 0x40;
|
||||
PINMUX_AUX(PINMUX_AUX_X_I2C_SCL(idx)) = PINMUX_INPUT_ENABLE;
|
||||
PINMUX_AUX(PINMUX_AUX_X_I2C_SDA(idx)) = PINMUX_INPUT_ENABLE;
|
||||
}
|
||||
|
|
|
|||
61
ipl/pinmux.h
61
ipl/pinmux.h
|
|
@ -22,42 +22,65 @@
|
|||
/*! APB MISC registers. */
|
||||
#define APB_MISC_GP_SDMMC1_CLK_LPBK_CONTROL 0x8D4
|
||||
#define APB_MISC_GP_SDMMC3_CLK_LPBK_CONTROL 0x8D8
|
||||
#define APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL 0xA98
|
||||
#define APB_MISC_GP_VGPIO_GPIO_MUX_SEL 0xB74
|
||||
#define APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL 0xA98
|
||||
#define APB_MISC_GP_VGPIO_GPIO_MUX_SEL 0xB74
|
||||
|
||||
/*! Pinmux registers. */
|
||||
#define PINMUX_AUX_SDMMC1_CLK 0x00
|
||||
#define PINMUX_AUX_SDMMC1_CMD 0x04
|
||||
#define PINMUX_AUX_SDMMC1_CLK 0x00
|
||||
#define PINMUX_AUX_SDMMC1_CMD 0x04
|
||||
#define PINMUX_AUX_SDMMC1_DAT3 0x08
|
||||
#define PINMUX_AUX_SDMMC1_DAT2 0x0C
|
||||
#define PINMUX_AUX_SDMMC1_DAT1 0x10
|
||||
#define PINMUX_AUX_SDMMC1_DAT0 0x14
|
||||
#define PINMUX_AUX_SDMMC3_CLK 0x1C
|
||||
#define PINMUX_AUX_SDMMC3_CMD 0x20
|
||||
#define PINMUX_AUX_SDMMC3_CLK 0x1C
|
||||
#define PINMUX_AUX_SDMMC3_CMD 0x20
|
||||
#define PINMUX_AUX_SDMMC3_DAT0 0x24
|
||||
#define PINMUX_AUX_SDMMC3_DAT1 0x28
|
||||
#define PINMUX_AUX_SDMMC3_DAT2 0x2C
|
||||
#define PINMUX_AUX_SDMMC3_DAT3 0x30
|
||||
#define PINMUX_AUX_DMIC3_CLK 0xB4
|
||||
#define PINMUX_AUX_UART2_TX 0xF4
|
||||
#define PINMUX_AUX_UART3_TX 0x104
|
||||
#define PINMUX_AUX_NFC_EN 0x1D0
|
||||
#define PINMUX_AUX_NFC_INT 0x1D4
|
||||
#define PINMUX_AUX_LCD_BL_PWM 0x1FC
|
||||
#define PINMUX_AUX_LCD_BL_EN 0x200
|
||||
#define PINMUX_AUX_LCD_RST 0x204
|
||||
#define PINMUX_AUX_GPIO_PE6 0x248
|
||||
#define PINMUX_AUX_GPIO_PH6 0x250
|
||||
#define PINMUX_AUX_GPIO_PZ1 0x280
|
||||
#define PINMUX_AUX_DMIC3_CLK 0xB4
|
||||
#define PINMUX_AUX_UART2_TX 0xF4
|
||||
#define PINMUX_AUX_UART3_TX 0x104
|
||||
#define PINMUX_AUX_NFC_EN 0x1D0
|
||||
#define PINMUX_AUX_NFC_INT 0x1D4
|
||||
#define PINMUX_AUX_LCD_BL_PWM 0x1FC
|
||||
#define PINMUX_AUX_LCD_BL_EN 0x200
|
||||
#define PINMUX_AUX_LCD_RST 0x204
|
||||
#define PINMUX_AUX_GPIO_PE6 0x248
|
||||
#define PINMUX_AUX_GPIO_PH6 0x250
|
||||
#define PINMUX_AUX_GPIO_PZ1 0x280
|
||||
/*! 0:UART-A, 1:UART-B, 3:UART-C, 3:UART-D */
|
||||
#define PINMUX_AUX_UARTX_TX(x) (0xE4 + 0x10 * (x))
|
||||
#define PINMUX_AUX_UARTX_RX(x) (0xE8 + 0x10 * (x))
|
||||
#define PINMUX_AUX_UARTX_TX(x) (0xE4 + 0x10 * (x))
|
||||
#define PINMUX_AUX_UARTX_RX(x) (0xE8 + 0x10 * (x))
|
||||
#define PINMUX_AUX_UARTX_RTS(x) (0xEC + 0x10 * (x))
|
||||
#define PINMUX_AUX_UARTX_CTS(x) (0xF0 + 0x10 * (x))
|
||||
/*! 0:GEN1, 1:GEN2, 2:GEN3, 3:CAM, 4:PWR */
|
||||
#define PINMUX_AUX_X_I2C_SCL(x) (0xBC + 8 * (x))
|
||||
#define PINMUX_AUX_X_I2C_SDA(x) (0xC0 + 8 * (x))
|
||||
|
||||
#define PINMUX_FUNC_MASK (3 << 0)
|
||||
|
||||
#define PINMUX_PULL_MASK (3 << 2)
|
||||
#define PINMUX_PULL_NONE (0 << 2)
|
||||
#define PINMUX_PULL_DOWN (1 << 2)
|
||||
#define PINMUX_PULL_UP (2 << 2)
|
||||
|
||||
#define PINMUX_TRISTATE (1 << 4)
|
||||
#define PINMUX_PARKED (1 << 5)
|
||||
#define PINMUX_INPUT_ENABLE (1 << 6)
|
||||
#define PINMUX_LOCK (1 << 7)
|
||||
#define PINMUX_LPDR (1 << 8)
|
||||
#define PINMUX_HSM (1 << 9)
|
||||
|
||||
#define PINMUX_IO_HV (1 << 10)
|
||||
#define PINMUX_OPEN_DRAIN (1 << 11)
|
||||
#define PINMUX_SCHMT (1 << 12)
|
||||
|
||||
#define PINMUX_DRIVE_1X (0 << 13)
|
||||
#define PINMUX_DRIVE_2X (1 << 13)
|
||||
#define PINMUX_DRIVE_3X (2 << 13)
|
||||
#define PINMUX_DRIVE_4X (3 << 13)
|
||||
|
||||
void pinmux_config_uart(u32 idx);
|
||||
void pinmux_config_i2c(u32 idx);
|
||||
|
||||
|
|
|
|||
15
ipl/sd.h
15
ipl/sd.h
|
|
@ -89,6 +89,21 @@
|
|||
#define UHS_DDR50_BUS_SPEED 4
|
||||
#define HS400_BUS_SPEED 5
|
||||
|
||||
#define SD_MODE_HIGH_SPEED (1 << HIGH_SPEED_BUS_SPEED)
|
||||
#define SD_MODE_UHS_SDR12 (1 << UHS_SDR12_BUS_SPEED)
|
||||
#define SD_MODE_UHS_SDR25 (1 << UHS_SDR25_BUS_SPEED)
|
||||
#define SD_MODE_UHS_SDR50 (1 << UHS_SDR50_BUS_SPEED)
|
||||
#define SD_MODE_UHS_SDR104 (1 << UHS_SDR104_BUS_SPEED)
|
||||
#define SD_MODE_UHS_DDR50 (1 << UHS_DDR50_BUS_SPEED)
|
||||
|
||||
#define SD_DRIVER_TYPE_B 0x01
|
||||
#define SD_DRIVER_TYPE_A 0x02
|
||||
|
||||
#define SD_SET_CURRENT_LIMIT_200 0
|
||||
#define SD_SET_CURRENT_LIMIT_400 1
|
||||
#define SD_SET_CURRENT_LIMIT_600 2
|
||||
#define SD_SET_CURRENT_LIMIT_800 3
|
||||
|
||||
/*
|
||||
* SD_SWITCH mode
|
||||
*/
|
||||
|
|
|
|||
11
ipl/sdmmc.c
11
ipl/sdmmc.c
|
|
@ -761,7 +761,7 @@ int _sd_storage_switch(sdmmc_storage_t *storage, void *buf, int flag, u32 arg)
|
|||
|
||||
int _sd_storage_enable_highspeed(sdmmc_storage_t *storage, u32 hs_type, u8 *buf)
|
||||
{
|
||||
if (!_sd_storage_switch(storage, buf, 0, hs_type))
|
||||
if (!_sd_storage_switch(storage, buf, SD_SWITCH_CHECK, 0, hs_type))
|
||||
return 0;
|
||||
|
||||
u32 type_out = buf[16] & 0xF;
|
||||
|
|
@ -770,7 +770,7 @@ int _sd_storage_enable_highspeed(sdmmc_storage_t *storage, u32 hs_type, u8 *buf)
|
|||
|
||||
if ((((u16)buf[0] << 8) | buf[1]) < 0x320)
|
||||
{
|
||||
if (!_sd_storage_switch(storage, buf, 1, hs_type))
|
||||
if (!_sd_storage_switch(storage, buf, SD_SWITCH_SET, 0, hs_type))
|
||||
return 0;
|
||||
|
||||
if (type_out != (buf[16] & 0xF))
|
||||
|
|
@ -787,12 +787,13 @@ int _sd_storage_enable_highspeed_low_volt(sdmmc_storage_t *storage, u32 type, u8
|
|||
|
||||
if (!_sd_storage_switch_get(storage, buf))
|
||||
return 0;
|
||||
//gfx_hexdump(&gfx_con, 0, (u8 *)buf, 64);
|
||||
|
||||
u32 hs_type = 0;
|
||||
switch (type)
|
||||
{
|
||||
case 11:
|
||||
if (buf[13] & 8)
|
||||
if (buf[13] & SD_MODE_UHS_SDR104)
|
||||
{
|
||||
type = 11;
|
||||
hs_type = UHS_SDR104_BUS_SPEED;
|
||||
|
|
@ -800,7 +801,7 @@ int _sd_storage_enable_highspeed_low_volt(sdmmc_storage_t *storage, u32 type, u8
|
|||
}
|
||||
//Fall through.
|
||||
case 10:
|
||||
if (!(buf[13] & 4))
|
||||
if (!(buf[13] & SD_MODE_UHS_SDR50))
|
||||
return 0;
|
||||
type = 10;
|
||||
hs_type = UHS_SDR50_BUS_SPEED;
|
||||
|
|
@ -823,7 +824,7 @@ int _sd_storage_enable_highspeed_high_volt(sdmmc_storage_t *storage, u8 *buf)
|
|||
{
|
||||
if (!_sd_storage_switch_get(storage, buf))
|
||||
return 0;
|
||||
|
||||
//gfx_hexdump(&gfx_con, 0, (u8 *)buf, 64);
|
||||
if (!(buf[13] & 2))
|
||||
return 1;
|
||||
|
||||
|
|
|
|||
|
|
@ -908,7 +908,7 @@ static int _sdmmc_execute_cmd_inner(sdmmc_t *sdmmc, sdmmc_cmd_t *cmd, sdmmc_req_
|
|||
static int _sdmmc_config_sdmmc1()
|
||||
{
|
||||
//Configure SD card detect.
|
||||
PINMUX_AUX(PINMUX_AUX_GPIO_PZ1) = 0x49; //GPIO control, pull up.
|
||||
PINMUX_AUX(PINMUX_AUX_GPIO_PZ1) = PINMUX_INPUT_ENABLE | PINMUX_PULL_UP | 1; //GPIO control, pull up.
|
||||
APB_MISC(APB_MISC_GP_VGPIO_GPIO_MUX_SEL) = 0;
|
||||
gpio_config(GPIO_PORT_Z, GPIO_PIN_1, GPIO_MODE_GPIO);
|
||||
gpio_output_enable(GPIO_PORT_Z, GPIO_PIN_1, GPIO_OUTPUT_DISABLE);
|
||||
|
|
@ -927,12 +927,12 @@ static int _sdmmc_config_sdmmc1()
|
|||
|
||||
//Configure SDMMC1 pinmux.
|
||||
APB_MISC(APB_MISC_GP_SDMMC1_CLK_LPBK_CONTROL) = 1;
|
||||
PINMUX_AUX(PINMUX_AUX_SDMMC1_CLK) = 0x2060;
|
||||
PINMUX_AUX(PINMUX_AUX_SDMMC1_CMD) = 0x2068;
|
||||
PINMUX_AUX(PINMUX_AUX_SDMMC1_DAT3) = 0x2068;
|
||||
PINMUX_AUX(PINMUX_AUX_SDMMC1_DAT2) = 0x2068;
|
||||
PINMUX_AUX(PINMUX_AUX_SDMMC1_DAT1) = 0x2068;
|
||||
PINMUX_AUX(PINMUX_AUX_SDMMC1_DAT0) = 0x2068;
|
||||
PINMUX_AUX(PINMUX_AUX_SDMMC1_CLK) = PINMUX_DRIVE_2X | PINMUX_INPUT_ENABLE | PINMUX_PARKED;
|
||||
PINMUX_AUX(PINMUX_AUX_SDMMC1_CMD) = PINMUX_DRIVE_2X | PINMUX_INPUT_ENABLE | PINMUX_PARKED | PINMUX_PULL_UP;
|
||||
PINMUX_AUX(PINMUX_AUX_SDMMC1_DAT3) = PINMUX_DRIVE_2X | PINMUX_INPUT_ENABLE | PINMUX_PARKED | PINMUX_PULL_UP;
|
||||
PINMUX_AUX(PINMUX_AUX_SDMMC1_DAT2) = PINMUX_DRIVE_2X | PINMUX_INPUT_ENABLE | PINMUX_PARKED | PINMUX_PULL_UP;
|
||||
PINMUX_AUX(PINMUX_AUX_SDMMC1_DAT1) = PINMUX_DRIVE_2X | PINMUX_INPUT_ENABLE | PINMUX_PARKED | PINMUX_PULL_UP;
|
||||
PINMUX_AUX(PINMUX_AUX_SDMMC1_DAT0) = PINMUX_DRIVE_2X | PINMUX_INPUT_ENABLE | PINMUX_PARKED | PINMUX_PULL_UP;
|
||||
|
||||
//Make sure the SDMMC1 controller is powered.
|
||||
PMC(APBDEV_PMC_NO_IOPOWER) &= ~(1 << 12);
|
||||
|
|
@ -940,7 +940,7 @@ static int _sdmmc_config_sdmmc1()
|
|||
PMC(APBDEV_PMC_PWR_DET_VAL) |= (1 << 12);
|
||||
|
||||
//Set enable SD card power.
|
||||
PINMUX_AUX(PINMUX_AUX_DMIC3_CLK) = 0x45; //GPIO control, pull down.
|
||||
PINMUX_AUX(PINMUX_AUX_DMIC3_CLK) = PINMUX_INPUT_ENABLE | PINMUX_PULL_DOWN | 1; //GPIO control, pull down.
|
||||
gpio_config(GPIO_PORT_E, GPIO_PIN_4, GPIO_MODE_GPIO);
|
||||
gpio_write(GPIO_PORT_E, GPIO_PIN_4, GPIO_HIGH);
|
||||
gpio_output_enable(GPIO_PORT_E, GPIO_PIN_4, GPIO_OUTPUT_ENABLE);
|
||||
|
|
|
|||
Loading…
Reference in a new issue