diff --git a/bdk/soc/hw_init.c b/bdk/soc/hw_init.c
index 5c81b1a..3a35ece 100644
--- a/bdk/soc/hw_init.c
+++ b/bdk/soc/hw_init.c
@@ -42,6 +42,7 @@
 #include <storage/nx_sd.h>
 #include <storage/sdmmc.h>
 #include <thermal/fan.h>
+#include <thermal/tmp451.h>
 #include <utils/util.h>
 
 extern boot_cfg_t b_cfg;
@@ -425,9 +426,10 @@ void hw_reinit_workaround(bool coreboot, u32 magic)
 	bpmp_clk_rate_set(BPMP_CLK_NORMAL);
 
 #ifdef NYX
-	// Deinit touchscreen, 5V regulators and Joy-Con.
-	touch_power_off();
+	// Disable temperature sensor, touchscreen, 5V regulators and Joy-Con.
+	tmp451_end();
 	set_fan_duty(0);
+	touch_power_off();
 	jc_deinit();
 	regulator_5v_disable(REGULATOR_5V_ALL);
 	clock_disable_uart(UART_B);
diff --git a/bdk/thermal/tmp451.c b/bdk/thermal/tmp451.c
index fb9f9fa..65f2fd2 100644
--- a/bdk/thermal/tmp451.c
+++ b/bdk/thermal/tmp451.c
@@ -1,7 +1,7 @@
 /*
  * SOC/PCB Temperature driver for Nintendo Switch's TI TMP451
  *
- * Copyright (c) 2018 CTCaer
+ * Copyright (c) 2018-2020 CTCaer
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -16,7 +16,9 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <soc/hw_init.h>
 #include <soc/i2c.h>
+#include <soc/t210.h>
 #include <thermal/tmp451.h>
 
 u16 tmp451_get_soc_temp(bool intenger)
@@ -56,6 +58,20 @@ void tmp451_init()
 	// Disable ALARM and Range to 0 - 127 oC.
 	i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_CONFIG_REG, 0x80);
 
+	// Set remote sensor offsets based on SoC.
+	if (hw_get_chip_id() == GP_HIDREV_MAJOR_T210)
+	{
+		// Set offset to 0 oC for Erista.
+		i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_SOC_TMP_OFH_REG, 0);
+		i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_SOC_TMP_OFL_REG, 0);
+	}
+	else
+	{
+		// Set offset to -12.5 oC for Mariko.
+		i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_SOC_TMP_OFH_REG, 0xF3); // - 13  oC.
+		i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_SOC_TMP_OFL_REG, 0x80); // + 0.5 oC.
+	}
+
 	// Set conversion rate to 32/s and make a read to update the reg.
 	i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_CNV_RATE_REG, 9);
 	tmp451_get_soc_temp(false);
@@ -63,3 +79,9 @@ void tmp451_init()
 	// Set rate to every 4 seconds.
 	i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_CNV_RATE_REG, 2);
 }
+
+void tmp451_end()
+{
+	// Place into shutdown mode to conserve power.
+	i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_CONFIG_REG, 0xC0);
+}
diff --git a/bdk/thermal/tmp451.h b/bdk/thermal/tmp451.h
index 9549ffa..6258fbd 100644
--- a/bdk/thermal/tmp451.h
+++ b/bdk/thermal/tmp451.h
@@ -32,11 +32,15 @@
 #define TMP451_SOC_TMP_DEC_REG 0x10
 #define TMP451_PCB_TMP_DEC_REG 0x15
 
+#define TMP451_SOC_TMP_OFH_REG 0x11
+#define TMP451_SOC_TMP_OFL_REG 0x12
+
 // If input is false, the return value is packed. MSByte is the integer in oC
 // and the LSByte is the decimal point truncated to 2 decimal places.
 // Otherwise it's an integer oC.
 u16 tmp451_get_soc_temp(bool integer);
 u16 tmp451_get_pcb_temp(bool integer);
 void tmp451_init();
+void tmp451_end();
 
 #endif /* __TMP451_H_ */