sdmmc v2: HW driver fixes

This commit is contained in:
CTCaer 2020-04-29 21:39:03 +03:00
parent 66780bb4c2
commit 88b01994bd
2 changed files with 252 additions and 104 deletions

View file

@ -54,8 +54,6 @@ int sdmmc_get_io_power(sdmmc_t *sdmmc)
static int _sdmmc_set_io_power(sdmmc_t *sdmmc, u32 power)
{
u8 pwr = 0;
switch (power)
{
case SDMMC_POWER_OFF:
@ -63,21 +61,16 @@ static int _sdmmc_set_io_power(sdmmc_t *sdmmc, u32 power)
break;
case SDMMC_POWER_1_8:
sdmmc->regs->pwrcon = SDHCI_POWER_180;
pwr = SDHCI_POWER_180;
break;
case SDMMC_POWER_3_3:
sdmmc->regs->pwrcon = SDHCI_POWER_330;
pwr = SDHCI_POWER_330;
break;
default:
return 0;
}
if (power != SDMMC_POWER_OFF)
{
pwr |= SDHCI_POWER_ON;
sdmmc->regs->pwrcon = pwr;
}
sdmmc->regs->pwrcon |= SDHCI_POWER_ON;
return 1;
}
@ -94,15 +87,14 @@ u32 sdmmc_get_bus_width(sdmmc_t *sdmmc)
void sdmmc_set_bus_width(sdmmc_t *sdmmc, u32 bus_width)
{
u32 host_control = sdmmc->regs->hostctl & ~(SDHCI_CTRL_4BITBUS | SDHCI_CTRL_8BITBUS);
if (bus_width == SDMMC_BUS_WIDTH_1)
sdmmc->regs->hostctl &= ~(SDHCI_CTRL_4BITBUS | SDHCI_CTRL_8BITBUS);
sdmmc->regs->hostctl = host_control;
else if (bus_width == SDMMC_BUS_WIDTH_4)
{
sdmmc->regs->hostctl |= SDHCI_CTRL_4BITBUS;
sdmmc->regs->hostctl &= ~SDHCI_CTRL_8BITBUS;
}
sdmmc->regs->hostctl = host_control | SDHCI_CTRL_4BITBUS;
else if (bus_width == SDMMC_BUS_WIDTH_8)
sdmmc->regs->hostctl |= SDHCI_CTRL_8BITBUS;
sdmmc->regs->hostctl = host_control | SDHCI_CTRL_8BITBUS;
}
void sdmmc_set_tap_value(sdmmc_t *sdmmc)
@ -149,19 +141,20 @@ static void _sdmmc_pad_config_fallback(sdmmc_t *sdmmc, u32 power)
_sdmmc_get_clkcon(sdmmc);
switch (sdmmc->id)
{
case SDMMC_1:
case SDMMC_1: // 33 Ohm 2X Driver.
if (power == SDMMC_POWER_OFF)
break;
u32 sdmmc1_pad_cfg = APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) & 0xF8080FFF;
if (power == SDMMC_POWER_1_8)
APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) = 0x304; // Up: 3, Dn: 4.
APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) = sdmmc1_pad_cfg | (0xB0F << 12); // Up: 11, Dn: 15. For 33 ohm.
else if (power == SDMMC_POWER_3_3)
APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) = 0x808; // Up: 8, Dn: 8.
APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) = sdmmc1_pad_cfg | (0xC0C << 12); // Up: 12, Dn: 12. For 33 ohm.
break;
case SDMMC_4:
APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) = (APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) & 0x3FFC) | 0x1040;
case SDMMC_2:
case SDMMC_4: // 50 Ohm 2X Driver. PU:16, PD:16.
APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) = (APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) & 0xFFFFC003) | 0x1040;
break;
}
//TODO: load standard values for other controllers, can depend on power.
}
static void _sdmmc_autocal_execute(sdmmc_t *sdmmc, u32 power)
@ -184,20 +177,43 @@ static void _sdmmc_autocal_execute(sdmmc_t *sdmmc, u32 power)
// Enable auto calibration and start auto configuration.
sdmmc->regs->autocalcfg |= TEGRA_MMC_AUTOCALCFG_AUTO_CAL_ENABLE | TEGRA_MMC_AUTOCALCFG_AUTO_CAL_START;
_sdmmc_get_clkcon(sdmmc);
usleep(1);
usleep(2);
u32 timeout = get_tmr_ms() + 10;
while (sdmmc->regs->autocalsts & TEGRA_MMC_AUTOCALSTS_AUTO_CAL_ACTIVE)
{
if (get_tmr_ms() > timeout)
{
// In case autocalibration fails, we load suggested standard values.
_sdmmc_pad_config_fallback(sdmmc, power);
sdmmc->regs->autocalcfg &= ~TEGRA_MMC_AUTOCALCFG_AUTO_CAL_ENABLE;
timeout = 0; // Set timeout to 0 if we timed out.
break;
}
}
/*
// Check if PU results are inside limits.
// SDMMC1: CZ pads - 7-bit PU. SDMMC2/4: LV_CZ pads - 5-bit PU.
u8 autocal_pu_status = sdmmc->regs->autocalsts & 0x7F;
switch (sdmmc->id)
{
case SDMMC_1:
if (!autocal_pu_status || autocal_pu_status == 0x7F)
timeout = 0;
break;
case SDMMC_2:
case SDMMC_4:
autocal_pu_status &= 0x1F;
if (!autocal_pu_status || autocal_pu_status == 0x1F)
timeout = 0;
break;
}
*/
// In case auto calibration fails, we load suggested standard values.
if (!timeout)
{
_sdmmc_pad_config_fallback(sdmmc, power);
sdmmc->regs->autocalcfg &= ~TEGRA_MMC_AUTOCALCFG_AUTO_CAL_ENABLE;
}
// Disable E_INPUT to conserve power.
sdmmc->regs->sdmemcmppadctl &= ~TEGRA_MMC_SDMEMCOMPPADCTRL_PAD_E_INPUT_PWRD;
if(should_enable_sd_clock)
@ -264,6 +280,7 @@ int sdmmc_setup_clock(sdmmc_t *sdmmc, u32 type)
_sdmmc_config_tap_val(sdmmc, type);
_sdmmc_reset(sdmmc);
switch (type)
{
@ -332,6 +349,10 @@ int sdmmc_setup_clock(sdmmc_t *sdmmc, u32 type)
static void _sdmmc_card_clock_enable(sdmmc_t *sdmmc)
{
// Recalibrate conditionally.
if ((sdmmc->id == SDMMC_1) && !sdmmc->auto_cal_enabled)
_sdmmc_autocal_execute(sdmmc, sdmmc_get_io_power(sdmmc));
if (!sdmmc->auto_cal_enabled)
{
if (!(sdmmc->regs->clkcon & SDHCI_CLOCK_CARD_EN))
@ -348,6 +369,10 @@ static void _sdmmc_sd_clock_disable(sdmmc_t *sdmmc)
void sdmmc_card_clock_ctrl(sdmmc_t *sdmmc, int auto_cal_enable)
{
// Recalibrate periodically for SDMMC1.
if ((sdmmc->id == SDMMC_1) && !auto_cal_enable && sdmmc->card_clock_enabled)
_sdmmc_autocal_execute(sdmmc, sdmmc_get_io_power(sdmmc));
sdmmc->auto_cal_enabled = auto_cal_enable;
if (auto_cal_enable)
{
@ -693,7 +718,7 @@ static int _sdmmc_autocal_config_offset(sdmmc_t *sdmmc, u32 power)
break;
}
sdmmc->regs->autocalcfg = (((sdmmc->regs->autocalcfg & 0xFFFF80FF) | (off_pd << 8)) >> 7 << 7) | off_pu;
sdmmc->regs->autocalcfg = (sdmmc->regs->autocalcfg & 0xFFFF8080) | (off_pd << 8) | off_pu;
return 1;
}
@ -788,6 +813,10 @@ int sdmmc_stop_transmission(sdmmc_t *sdmmc, u32 *rsp)
if (!sdmmc->card_clock_enabled)
return 0;
// Recalibrate periodically for SDMMC1.
if ((sdmmc->id == SDMMC_1) && sdmmc->auto_cal_enabled)
_sdmmc_autocal_execute(sdmmc, sdmmc_get_io_power(sdmmc));
bool should_disable_sd_clock = false;
if (!(sdmmc->regs->clkcon & SDHCI_CLOCK_CARD_EN))
{
@ -838,7 +867,7 @@ static int _sdmmc_config_dma(sdmmc_t *sdmmc, u32 *blkcnt_out, sdmmc_req_t *req)
trnmode |= SDHCI_TRNS_READ;
if (req->is_auto_cmd12)
trnmode = (trnmode & ~(SDHCI_TRNS_AUTO_CMD12 | SDHCI_TRNS_AUTO_CMD23)) | SDHCI_TRNS_AUTO_CMD12;
bpmp_mmu_maintenance(BPMP_MMU_MAINT_CLN_INV_WAY, false);
sdmmc->regs->trnmod = trnmode;
return 1;
@ -863,10 +892,7 @@ static int _sdmmc_update_dma(sdmmc_t *sdmmc)
break;
if (intr & SDHCI_INT_DATA_END)
{
bpmp_mmu_maintenance(BPMP_MMU_MAINT_CLN_INV_WAY, false);
return 1; // Transfer complete.
}
if (intr & SDHCI_INT_DMA_END)
{
@ -899,19 +925,21 @@ static int _sdmmc_execute_cmd_inner(sdmmc_t *sdmmc, sdmmc_cmd_t *cmd, sdmmc_req_
if (req)
{
_sdmmc_config_dma(sdmmc, &blkcnt, req);
_sdmmc_enable_interrupts(sdmmc);
// Flush cache before starting the transfer.
bpmp_mmu_maintenance(BPMP_MMU_MAINT_CLN_INV_WAY, false);
is_data_present = true;
}
else
{
_sdmmc_enable_interrupts(sdmmc);
is_data_present = false;
}
_sdmmc_enable_interrupts(sdmmc);
_sdmmc_send_cmd(sdmmc, cmd, is_data_present);
int result = _sdmmc_wait_response(sdmmc);
DPRINTF("rsp(%d): %08X, %08X, %08X, %08X\n", res,
DPRINTF("rsp(%d): %08X, %08X, %08X, %08X\n", result,
sdmmc->regs->rspreg0, sdmmc->regs->rspreg1, sdmmc->regs->rspreg2, sdmmc->regs->rspreg3);
if (result)
{
@ -930,6 +958,9 @@ static int _sdmmc_execute_cmd_inner(sdmmc_t *sdmmc, sdmmc_cmd_t *cmd, sdmmc_req_
{
if (req)
{
// Flush cache after transfer.
bpmp_mmu_maintenance(BPMP_MMU_MAINT_CLN_INV_WAY, false);
if (blkcnt_out)
*blkcnt_out = blkcnt;
@ -952,7 +983,7 @@ bool sdmmc_get_sd_inserted()
static int _sdmmc_config_sdmmc1()
{
// Configure SD card detect.
PINMUX_AUX(PINMUX_AUX_GPIO_PZ1) = PINMUX_INPUT_ENABLE | PINMUX_PULL_UP | 1; //GPIO control, pull up.
PINMUX_AUX(PINMUX_AUX_GPIO_PZ1) = PINMUX_INPUT_ENABLE | PINMUX_PULL_UP | 2; // GPIO control, pull up.
APB_MISC(APB_MISC_GP_VGPIO_GPIO_MUX_SEL) = 0;
gpio_config(GPIO_PORT_Z, GPIO_PIN_1, GPIO_MODE_GPIO);
gpio_output_enable(GPIO_PORT_Z, GPIO_PIN_1, GPIO_OUTPUT_DISABLE);
@ -981,12 +1012,15 @@ static int _sdmmc_config_sdmmc1()
PINMUX_AUX(PINMUX_AUX_SDMMC1_DAT0) = PINMUX_DRIVE_2X | PINMUX_INPUT_ENABLE | PINMUX_PARKED | PINMUX_PULL_UP;
// Make sure the SDMMC1 controller is powered.
PMC(APBDEV_PMC_NO_IOPOWER) |= PMC_NO_IOPOWER_SDMMC1_IO_EN;
usleep(1000);
PMC(APBDEV_PMC_NO_IOPOWER) &= ~(PMC_NO_IOPOWER_SDMMC1_IO_EN);
// Assume 3.3V SD card voltage.
// Inform IO pads that voltage is gonna be 3.3V.
PMC(APBDEV_PMC_PWR_DET_VAL) |= PMC_PWR_DET_SDMMC1_IO_EN;
// Set enable SD card power.
PINMUX_AUX(PINMUX_AUX_DMIC3_CLK) = PINMUX_INPUT_ENABLE | PINMUX_PULL_DOWN | 1; //GPIO control, pull down.
PINMUX_AUX(PINMUX_AUX_DMIC3_CLK) = PINMUX_PULL_DOWN | 2; // Pull down.
gpio_config(GPIO_PORT_E, GPIO_PIN_4, GPIO_MODE_GPIO);
gpio_write(GPIO_PORT_E, GPIO_PIN_4, GPIO_HIGH);
gpio_output_enable(GPIO_PORT_E, GPIO_PIN_4, GPIO_OUTPUT_ENABLE);
@ -997,20 +1031,39 @@ static int _sdmmc_config_sdmmc1()
max77620_regulator_enable(REGULATOR_LDO2, 1);
usleep(1000);
// For good measure.
APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) = 0x10000000;
// Set pad slew codes to get good quality clock.
APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) = (APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) & 0xFFFFFFF) | 0x50000000;
usleep(1000);
return 1;
}
static void _sdmmc_config_emmc(u32 id)
{
switch (id)
{
case SDMMC_2:
// Unset park for pads.
APB_MISC(APB_MISC_GP_EMMC2_PAD_CFGPADCTRL) &= 0xF8003FFF;
break;
case SDMMC_4:
// Unset park for pads.
APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) &= 0xF8003FFF;
// Set default pad cfg.
APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) = (APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) & 0xFFFFC003) | 0x1040;
// Enabled schmitt trigger.
APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) |= 1; // Enable Schmitt trigger.
break;
}
}
int sdmmc_init(sdmmc_t *sdmmc, u32 id, u32 power, u32 bus_width, u32 type, int auto_cal_enable)
{
if (id > SDMMC_4)
return 0;
static const u32 trim_values[] = { 2, 8, 3, 8 };
if (id == SDMMC_1)
if (!_sdmmc_config_sdmmc1())
if (id > SDMMC_4)
return 0;
memset(sdmmc, 0, sizeof(sdmmc_t));
@ -1019,6 +1072,19 @@ int sdmmc_init(sdmmc_t *sdmmc, u32 id, u32 power, u32 bus_width, u32 type, int a
sdmmc->id = id;
sdmmc->clock_stopped = 1;
// Do specific SDMMC HW configuration.
switch (id)
{
case SDMMC_1:
if (!_sdmmc_config_sdmmc1())
return 0;
break;
case SDMMC_2:
case SDMMC_4:
_sdmmc_config_emmc(id);
break;
}
if (clock_sdmmc_is_not_reset_and_enabled(id))
{
_sdmmc_sd_clock_disable(sdmmc);
@ -1033,10 +1099,9 @@ int sdmmc_init(sdmmc_t *sdmmc, u32 id, u32 power, u32 bus_width, u32 type, int a
sdmmc->clock_stopped = 0;
//TODO: make this skip-able.
sdmmc->regs->iospare |= 0x80000;
sdmmc->regs->veniotrimctl &= 0xFFFFFFFB;
static const u32 trim_values[] = { 2, 8, 3, 8 };
sdmmc->regs->venclkctl = (sdmmc->regs->venclkctl & 0xE0FFFFFF) | (trim_values[sdmmc->id] << 24);
sdmmc->regs->iospare |= 0x80000; // Enable muxing.
sdmmc->regs->veniotrimctl &= 0xFFFFFFFB; // Set Band Gap VREG to supply DLL.
sdmmc->regs->venclkctl = (sdmmc->regs->venclkctl & 0xE0FFFFFB) | (trim_values[sdmmc->id] << 24);
sdmmc->regs->sdmemcmppadctl =
(sdmmc->regs->sdmemcmppadctl & TEGRA_MMC_SDMEMCOMPPADCTRL_COMP_VREF_SEL_MASK) | 7;
@ -1077,7 +1142,11 @@ void sdmmc_end(sdmmc_t *sdmmc)
{
gpio_output_enable(GPIO_PORT_E, GPIO_PIN_4, GPIO_OUTPUT_DISABLE);
max77620_regulator_enable(REGULATOR_LDO2, 0);
sd_power_cycle_time_start = get_tmr_ms(); // Some sandisc U1 cards need 100ms for a power cycle.
// Inform IO pads that next voltage might be 3.3V.
PMC(APBDEV_PMC_PWR_DET_VAL) |= PMC_PWR_DET_SDMMC1_IO_EN;
sd_power_cycle_time_start = get_tmr_ms(); // Some SanDisk U1 cards need 100ms for a power cycle.
usleep(1000); // To power cycle, min 1ms without power is needed.
}
@ -1132,6 +1201,13 @@ int sdmmc_enable_low_voltage(sdmmc_t *sdmmc)
_sdmmc_get_clkcon(sdmmc);
// Switch to 1.8V and wait for regulator to stabilize. Assume max possible wait needed.
max77620_regulator_set_voltage(REGULATOR_LDO2, 1800000);
usleep(300);
// Inform IO pads that we switched to 1.8V.
PMC(APBDEV_PMC_PWR_DET_VAL) &= ~(PMC_PWR_DET_SDMMC1_IO_EN);
// Enable schmitt trigger for better duty cycle and low jitter clock.
PINMUX_AUX(PINMUX_AUX_SDMMC1_CLK) |= PINMUX_SCHMT;
PINMUX_AUX(PINMUX_AUX_SDMMC1_CMD) |= PINMUX_SCHMT;
@ -1140,15 +1216,13 @@ int sdmmc_enable_low_voltage(sdmmc_t *sdmmc)
PINMUX_AUX(PINMUX_AUX_SDMMC1_DAT1) |= PINMUX_SCHMT;
PINMUX_AUX(PINMUX_AUX_SDMMC1_DAT0) |= PINMUX_SCHMT;
max77620_regulator_set_voltage(REGULATOR_LDO2, 1800000);
PMC(APBDEV_PMC_PWR_DET_VAL) &= ~(PMC_PWR_DET_SDMMC1_IO_EN);
_sdmmc_autocal_config_offset(sdmmc, SDMMC_POWER_1_8);
_sdmmc_autocal_execute(sdmmc, SDMMC_POWER_1_8);
_sdmmc_set_io_power(sdmmc, SDMMC_POWER_1_8);
_sdmmc_get_clkcon(sdmmc);
msleep(5);
msleep(5); // Wait minimum 5ms before turning on the card clock.
// Turn on SDCLK.
if (sdmmc->regs->hostctl2 & SDHCI_CTRL_VDD_180)
{
sdmmc->regs->clkcon |= SDHCI_CLOCK_CARD_EN;

View file

@ -54,8 +54,6 @@ int sdmmc_get_io_power(sdmmc_t *sdmmc)
static int _sdmmc_set_io_power(sdmmc_t *sdmmc, u32 power)
{
u8 pwr = 0;
switch (power)
{
case SDMMC_POWER_OFF:
@ -63,21 +61,16 @@ static int _sdmmc_set_io_power(sdmmc_t *sdmmc, u32 power)
break;
case SDMMC_POWER_1_8:
sdmmc->regs->pwrcon = SDHCI_POWER_180;
pwr = SDHCI_POWER_180;
break;
case SDMMC_POWER_3_3:
sdmmc->regs->pwrcon = SDHCI_POWER_330;
pwr = SDHCI_POWER_330;
break;
default:
return 0;
}
if (power != SDMMC_POWER_OFF)
{
pwr |= SDHCI_POWER_ON;
sdmmc->regs->pwrcon = pwr;
}
sdmmc->regs->pwrcon |= SDHCI_POWER_ON;
return 1;
}
@ -94,15 +87,14 @@ u32 sdmmc_get_bus_width(sdmmc_t *sdmmc)
void sdmmc_set_bus_width(sdmmc_t *sdmmc, u32 bus_width)
{
u32 host_control = sdmmc->regs->hostctl & ~(SDHCI_CTRL_4BITBUS | SDHCI_CTRL_8BITBUS);
if (bus_width == SDMMC_BUS_WIDTH_1)
sdmmc->regs->hostctl &= ~(SDHCI_CTRL_4BITBUS | SDHCI_CTRL_8BITBUS);
sdmmc->regs->hostctl = host_control;
else if (bus_width == SDMMC_BUS_WIDTH_4)
{
sdmmc->regs->hostctl |= SDHCI_CTRL_4BITBUS;
sdmmc->regs->hostctl &= ~SDHCI_CTRL_8BITBUS;
}
sdmmc->regs->hostctl = host_control | SDHCI_CTRL_4BITBUS;
else if (bus_width == SDMMC_BUS_WIDTH_8)
sdmmc->regs->hostctl |= SDHCI_CTRL_8BITBUS;
sdmmc->regs->hostctl = host_control | SDHCI_CTRL_8BITBUS;
}
void sdmmc_set_tap_value(sdmmc_t *sdmmc)
@ -149,19 +141,20 @@ static void _sdmmc_pad_config_fallback(sdmmc_t *sdmmc, u32 power)
_sdmmc_get_clkcon(sdmmc);
switch (sdmmc->id)
{
case SDMMC_1:
case SDMMC_1: // 33 Ohm 2X Driver.
if (power == SDMMC_POWER_OFF)
break;
u32 sdmmc1_pad_cfg = APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) & 0xF8080FFF;
if (power == SDMMC_POWER_1_8)
APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) = 0x304; // Up: 3, Dn: 4.
APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) = sdmmc1_pad_cfg | (0xB0F << 12); // Up: 11, Dn: 15. For 33 ohm.
else if (power == SDMMC_POWER_3_3)
APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) = 0x808; // Up: 8, Dn: 8.
APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) = sdmmc1_pad_cfg | (0xC0C << 12); // Up: 12, Dn: 12. For 33 ohm.
break;
case SDMMC_4:
APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) = (APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) & 0x3FFC) | 0x1040;
case SDMMC_2:
case SDMMC_4: // 50 Ohm 2X Driver. PU:16, PD:16.
APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) = (APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) & 0xFFFFC003) | 0x1040;
break;
}
//TODO: load standard values for other controllers, can depend on power.
}
static void _sdmmc_autocal_execute(sdmmc_t *sdmmc, u32 power)
@ -184,20 +177,43 @@ static void _sdmmc_autocal_execute(sdmmc_t *sdmmc, u32 power)
// Enable auto calibration and start auto configuration.
sdmmc->regs->autocalcfg |= TEGRA_MMC_AUTOCALCFG_AUTO_CAL_ENABLE | TEGRA_MMC_AUTOCALCFG_AUTO_CAL_START;
_sdmmc_get_clkcon(sdmmc);
usleep(1);
usleep(2);
u32 timeout = get_tmr_ms() + 10;
while (sdmmc->regs->autocalsts & TEGRA_MMC_AUTOCALSTS_AUTO_CAL_ACTIVE)
{
if (get_tmr_ms() > timeout)
{
// In case autocalibration fails, we load suggested standard values.
_sdmmc_pad_config_fallback(sdmmc, power);
sdmmc->regs->autocalcfg &= ~TEGRA_MMC_AUTOCALCFG_AUTO_CAL_ENABLE;
timeout = 0; // Set timeout to 0 if we timed out.
break;
}
}
/*
// Check if PU results are inside limits.
// SDMMC1: CZ pads - 7-bit PU. SDMMC2/4: LV_CZ pads - 5-bit PU.
u8 autocal_pu_status = sdmmc->regs->autocalsts & 0x7F;
switch (sdmmc->id)
{
case SDMMC_1:
if (!autocal_pu_status || autocal_pu_status == 0x7F)
timeout = 0;
break;
case SDMMC_2:
case SDMMC_4:
autocal_pu_status &= 0x1F;
if (!autocal_pu_status || autocal_pu_status == 0x1F)
timeout = 0;
break;
}
*/
// In case auto calibration fails, we load suggested standard values.
if (!timeout)
{
_sdmmc_pad_config_fallback(sdmmc, power);
sdmmc->regs->autocalcfg &= ~TEGRA_MMC_AUTOCALCFG_AUTO_CAL_ENABLE;
}
// Disable E_INPUT to conserve power.
sdmmc->regs->sdmemcmppadctl &= ~TEGRA_MMC_SDMEMCOMPPADCTRL_PAD_E_INPUT_PWRD;
if(should_enable_sd_clock)
@ -264,6 +280,7 @@ int sdmmc_setup_clock(sdmmc_t *sdmmc, u32 type)
_sdmmc_config_tap_val(sdmmc, type);
_sdmmc_reset(sdmmc);
switch (type)
{
@ -332,6 +349,10 @@ int sdmmc_setup_clock(sdmmc_t *sdmmc, u32 type)
static void _sdmmc_card_clock_enable(sdmmc_t *sdmmc)
{
// Recalibrate conditionally.
if ((sdmmc->id == SDMMC_1) && !sdmmc->auto_cal_enabled)
_sdmmc_autocal_execute(sdmmc, sdmmc_get_io_power(sdmmc));
if (!sdmmc->auto_cal_enabled)
{
if (!(sdmmc->regs->clkcon & SDHCI_CLOCK_CARD_EN))
@ -348,6 +369,10 @@ static void _sdmmc_sd_clock_disable(sdmmc_t *sdmmc)
void sdmmc_card_clock_ctrl(sdmmc_t *sdmmc, int auto_cal_enable)
{
// Recalibrate periodically for SDMMC1.
if ((sdmmc->id == SDMMC_1) && !auto_cal_enable && sdmmc->card_clock_enabled)
_sdmmc_autocal_execute(sdmmc, sdmmc_get_io_power(sdmmc));
sdmmc->auto_cal_enabled = auto_cal_enable;
if (auto_cal_enable)
{
@ -693,7 +718,7 @@ static int _sdmmc_autocal_config_offset(sdmmc_t *sdmmc, u32 power)
break;
}
sdmmc->regs->autocalcfg = (((sdmmc->regs->autocalcfg & 0xFFFF80FF) | (off_pd << 8)) >> 7 << 7) | off_pu;
sdmmc->regs->autocalcfg = (sdmmc->regs->autocalcfg & 0xFFFF8080) | (off_pd << 8) | off_pu;
return 1;
}
@ -788,6 +813,10 @@ int sdmmc_stop_transmission(sdmmc_t *sdmmc, u32 *rsp)
if (!sdmmc->card_clock_enabled)
return 0;
// Recalibrate periodically for SDMMC1.
if ((sdmmc->id == SDMMC_1) && sdmmc->auto_cal_enabled)
_sdmmc_autocal_execute(sdmmc, sdmmc_get_io_power(sdmmc));
bool should_disable_sd_clock = false;
if (!(sdmmc->regs->clkcon & SDHCI_CLOCK_CARD_EN))
{
@ -838,7 +867,7 @@ static int _sdmmc_config_dma(sdmmc_t *sdmmc, u32 *blkcnt_out, sdmmc_req_t *req)
trnmode |= SDHCI_TRNS_READ;
if (req->is_auto_cmd12)
trnmode = (trnmode & ~(SDHCI_TRNS_AUTO_CMD12 | SDHCI_TRNS_AUTO_CMD23)) | SDHCI_TRNS_AUTO_CMD12;
bpmp_mmu_maintenance(BPMP_MMU_MAINT_CLN_INV_WAY, false);
sdmmc->regs->trnmod = trnmode;
return 1;
@ -863,10 +892,7 @@ static int _sdmmc_update_dma(sdmmc_t *sdmmc)
break;
if (intr & SDHCI_INT_DATA_END)
{
bpmp_mmu_maintenance(BPMP_MMU_MAINT_CLN_INV_WAY, false);
return 1; // Transfer complete.
}
if (intr & SDHCI_INT_DMA_END)
{
@ -899,19 +925,21 @@ static int _sdmmc_execute_cmd_inner(sdmmc_t *sdmmc, sdmmc_cmd_t *cmd, sdmmc_req_
if (req)
{
_sdmmc_config_dma(sdmmc, &blkcnt, req);
_sdmmc_enable_interrupts(sdmmc);
// Flush cache before starting the transfer.
bpmp_mmu_maintenance(BPMP_MMU_MAINT_CLN_INV_WAY, false);
is_data_present = true;
}
else
{
_sdmmc_enable_interrupts(sdmmc);
is_data_present = false;
}
_sdmmc_enable_interrupts(sdmmc);
_sdmmc_send_cmd(sdmmc, cmd, is_data_present);
int result = _sdmmc_wait_response(sdmmc);
DPRINTF("rsp(%d): %08X, %08X, %08X, %08X\n", res,
DPRINTF("rsp(%d): %08X, %08X, %08X, %08X\n", result,
sdmmc->regs->rspreg0, sdmmc->regs->rspreg1, sdmmc->regs->rspreg2, sdmmc->regs->rspreg3);
if (result)
{
@ -930,6 +958,9 @@ static int _sdmmc_execute_cmd_inner(sdmmc_t *sdmmc, sdmmc_cmd_t *cmd, sdmmc_req_
{
if (req)
{
// Flush cache after transfer.
bpmp_mmu_maintenance(BPMP_MMU_MAINT_CLN_INV_WAY, false);
if (blkcnt_out)
*blkcnt_out = blkcnt;
@ -952,7 +983,7 @@ bool sdmmc_get_sd_inserted()
static int _sdmmc_config_sdmmc1()
{
// Configure SD card detect.
PINMUX_AUX(PINMUX_AUX_GPIO_PZ1) = PINMUX_INPUT_ENABLE | PINMUX_PULL_UP | 1; //GPIO control, pull up.
PINMUX_AUX(PINMUX_AUX_GPIO_PZ1) = PINMUX_INPUT_ENABLE | PINMUX_PULL_UP | 2; // GPIO control, pull up.
APB_MISC(APB_MISC_GP_VGPIO_GPIO_MUX_SEL) = 0;
gpio_config(GPIO_PORT_Z, GPIO_PIN_1, GPIO_MODE_GPIO);
gpio_output_enable(GPIO_PORT_Z, GPIO_PIN_1, GPIO_OUTPUT_DISABLE);
@ -981,12 +1012,15 @@ static int _sdmmc_config_sdmmc1()
PINMUX_AUX(PINMUX_AUX_SDMMC1_DAT0) = PINMUX_DRIVE_2X | PINMUX_INPUT_ENABLE | PINMUX_PARKED | PINMUX_PULL_UP;
// Make sure the SDMMC1 controller is powered.
PMC(APBDEV_PMC_NO_IOPOWER) |= PMC_NO_IOPOWER_SDMMC1_IO_EN;
usleep(1000);
PMC(APBDEV_PMC_NO_IOPOWER) &= ~(PMC_NO_IOPOWER_SDMMC1_IO_EN);
// Assume 3.3V SD card voltage.
// Inform IO pads that voltage is gonna be 3.3V.
PMC(APBDEV_PMC_PWR_DET_VAL) |= PMC_PWR_DET_SDMMC1_IO_EN;
// Set enable SD card power.
PINMUX_AUX(PINMUX_AUX_DMIC3_CLK) = PINMUX_INPUT_ENABLE | PINMUX_PULL_DOWN | 1; //GPIO control, pull down.
PINMUX_AUX(PINMUX_AUX_DMIC3_CLK) = PINMUX_PULL_DOWN | 2; // Pull down.
gpio_config(GPIO_PORT_E, GPIO_PIN_4, GPIO_MODE_GPIO);
gpio_write(GPIO_PORT_E, GPIO_PIN_4, GPIO_HIGH);
gpio_output_enable(GPIO_PORT_E, GPIO_PIN_4, GPIO_OUTPUT_ENABLE);
@ -997,20 +1031,39 @@ static int _sdmmc_config_sdmmc1()
max77620_regulator_enable(REGULATOR_LDO2, 1);
usleep(1000);
// For good measure.
APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) = 0x10000000;
// Set pad slew codes to get good quality clock.
APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) = (APB_MISC(APB_MISC_GP_SDMMC1_PAD_CFGPADCTRL) & 0xFFFFFFF) | 0x50000000;
usleep(1000);
return 1;
}
static void _sdmmc_config_emmc(u32 id)
{
switch (id)
{
case SDMMC_2:
// Unset park for pads.
APB_MISC(APB_MISC_GP_EMMC2_PAD_CFGPADCTRL) &= 0xF8003FFF;
break;
case SDMMC_4:
// Unset park for pads.
APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) &= 0xF8003FFF;
// Set default pad cfg.
APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) = (APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) & 0xFFFFC003) | 0x1040;
// Enabled schmitt trigger.
APB_MISC(APB_MISC_GP_EMMC4_PAD_CFGPADCTRL) |= 1; // Enable Schmitt trigger.
break;
}
}
int sdmmc_init(sdmmc_t *sdmmc, u32 id, u32 power, u32 bus_width, u32 type, int auto_cal_enable)
{
if (id > SDMMC_4)
return 0;
static const u32 trim_values[] = { 2, 8, 3, 8 };
if (id == SDMMC_1)
if (!_sdmmc_config_sdmmc1())
if (id > SDMMC_4)
return 0;
memset(sdmmc, 0, sizeof(sdmmc_t));
@ -1019,6 +1072,19 @@ int sdmmc_init(sdmmc_t *sdmmc, u32 id, u32 power, u32 bus_width, u32 type, int a
sdmmc->id = id;
sdmmc->clock_stopped = 1;
// Do specific SDMMC HW configuration.
switch (id)
{
case SDMMC_1:
if (!_sdmmc_config_sdmmc1())
return 0;
break;
case SDMMC_2:
case SDMMC_4:
_sdmmc_config_emmc(id);
break;
}
if (clock_sdmmc_is_not_reset_and_enabled(id))
{
_sdmmc_sd_clock_disable(sdmmc);
@ -1033,10 +1099,9 @@ int sdmmc_init(sdmmc_t *sdmmc, u32 id, u32 power, u32 bus_width, u32 type, int a
sdmmc->clock_stopped = 0;
//TODO: make this skip-able.
sdmmc->regs->iospare |= 0x80000;
sdmmc->regs->veniotrimctl &= 0xFFFFFFFB;
static const u32 trim_values[] = { 2, 8, 3, 8 };
sdmmc->regs->venclkctl = (sdmmc->regs->venclkctl & 0xE0FFFFFF) | (trim_values[sdmmc->id] << 24);
sdmmc->regs->iospare |= 0x80000; // Enable muxing.
sdmmc->regs->veniotrimctl &= 0xFFFFFFFB; // Set Band Gap VREG to supply DLL.
sdmmc->regs->venclkctl = (sdmmc->regs->venclkctl & 0xE0FFFFFB) | (trim_values[sdmmc->id] << 24);
sdmmc->regs->sdmemcmppadctl =
(sdmmc->regs->sdmemcmppadctl & TEGRA_MMC_SDMEMCOMPPADCTRL_COMP_VREF_SEL_MASK) | 7;
@ -1077,7 +1142,11 @@ void sdmmc_end(sdmmc_t *sdmmc)
{
gpio_output_enable(GPIO_PORT_E, GPIO_PIN_4, GPIO_OUTPUT_DISABLE);
max77620_regulator_enable(REGULATOR_LDO2, 0);
sd_power_cycle_time_start = get_tmr_ms(); // Some sandisc U1 cards need 100ms for a power cycle.
// Inform IO pads that next voltage might be 3.3V.
PMC(APBDEV_PMC_PWR_DET_VAL) |= PMC_PWR_DET_SDMMC1_IO_EN;
sd_power_cycle_time_start = get_tmr_ms(); // Some SanDisk U1 cards need 100ms for a power cycle.
usleep(1000); // To power cycle, min 1ms without power is needed.
}
@ -1132,6 +1201,13 @@ int sdmmc_enable_low_voltage(sdmmc_t *sdmmc)
_sdmmc_get_clkcon(sdmmc);
// Switch to 1.8V and wait for regulator to stabilize. Assume max possible wait needed.
max77620_regulator_set_voltage(REGULATOR_LDO2, 1800000);
usleep(300);
// Inform IO pads that we switched to 1.8V.
PMC(APBDEV_PMC_PWR_DET_VAL) &= ~(PMC_PWR_DET_SDMMC1_IO_EN);
// Enable schmitt trigger for better duty cycle and low jitter clock.
PINMUX_AUX(PINMUX_AUX_SDMMC1_CLK) |= PINMUX_SCHMT;
PINMUX_AUX(PINMUX_AUX_SDMMC1_CMD) |= PINMUX_SCHMT;
@ -1140,15 +1216,13 @@ int sdmmc_enable_low_voltage(sdmmc_t *sdmmc)
PINMUX_AUX(PINMUX_AUX_SDMMC1_DAT1) |= PINMUX_SCHMT;
PINMUX_AUX(PINMUX_AUX_SDMMC1_DAT0) |= PINMUX_SCHMT;
max77620_regulator_set_voltage(REGULATOR_LDO2, 1800000);
PMC(APBDEV_PMC_PWR_DET_VAL) &= ~(PMC_PWR_DET_SDMMC1_IO_EN);
_sdmmc_autocal_config_offset(sdmmc, SDMMC_POWER_1_8);
_sdmmc_autocal_execute(sdmmc, SDMMC_POWER_1_8);
_sdmmc_set_io_power(sdmmc, SDMMC_POWER_1_8);
_sdmmc_get_clkcon(sdmmc);
msleep(5);
msleep(5); // Wait minimum 5ms before turning on the card clock.
// Turn on SDCLK.
if (sdmmc->regs->hostctl2 & SDHCI_CTRL_VDD_180)
{
sdmmc->regs->clkcon |= SDHCI_CLOCK_CARD_EN;