diff --git a/nyx/nyx_gui/frontend/gui_info.c b/nyx/nyx_gui/frontend/gui_info.c
index 5d5ec2a..263d082 100644
--- a/nyx/nyx_gui/frontend/gui_info.c
+++ b/nyx/nyx_gui/frontend/gui_info.c
@@ -249,13 +249,13 @@ static lv_res_t _create_mbox_cal0(lv_obj_t *btn)
 	// Check result. Don't error if hash doesn't match.
 	if (cal0_res == 1)
 	{
-		lv_label_set_text(lb_desc, "#FFDD00 Failed to init eMMC!#");
+		lv_label_set_text(lb_desc, "#FFDD00 Failed to init the eMMC!#");
 
 		goto out;
 	}
 	else if (cal0_res == 2)
 	{
-		lv_label_set_text(lb_desc, "#FFDD00 CAL0 is corrupt or wrong keys!#\n");
+		lv_label_set_text(lb_desc, "#FFDD00 CAL0 is corrupt or has the wrong keys!#\n");
 		goto out;
 	}
 
@@ -271,7 +271,7 @@ static lv_res_t _create_mbox_cal0(lv_obj_t *btn)
 		"#FF8000 WLAN MAC:#          %02X:%02X:%02X:%02X:%02X:%02X\n"
 		"#FF8000 Bluetooth MAC:#     %02X:%02X:%02X:%02X:%02X:%02X\n"
 		"#FF8000 Battery LOT:#       %s (%d)\n"
-		"#FF8000 LCD Vendor:#        ",
+		"#FF8000 Display Vendor:#        ",
 		cal0->version, cal0->update_cnt, cal0->serial_number,
 		cal0->wlan_mac[0], cal0->wlan_mac[1], cal0->wlan_mac[2], cal0->wlan_mac[3], cal0->wlan_mac[4], cal0->wlan_mac[5],
 		cal0->bd_mac[0], cal0->bd_mac[1], cal0->bd_mac[2], cal0->bd_mac[3], cal0->bd_mac[4], cal0->bd_mac[5],
@@ -384,12 +384,12 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 		"SoC Speedo 0 (SoC Val):\n"
 		"SoC Speedo 1 (BROM rev):\n"
 		"SoC Speedo 2:\n"
-		"CPU IDDQ Val:\n"
-		"SoC IDDQ Val:\n"
-		"Gpu IDDQ Val:\n"
+		"CPU IDDQ Value:\n"
+		"SoC IDDQ Value:\n"
+		"GPU IDDQ Value:\n"
 		"Vendor Code:\n"
 		"FAB Code:\n"
-		"LOT Code 0:\n"
+		"LOT Code:\n"
 		"Wafer ID:\n"
 		"X Coordinate:\n"
 		"Y Coordinate:"
@@ -424,7 +424,7 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 		sku = "Aula - Fric";
 		break;
 	default:
-		sku = "#FF8000 Unknown#";
+		sku = "#FF8000 Unknown. This should not happen#";
 		break;
 	}
 
@@ -438,7 +438,7 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 			strcpy(dram_man, "Samsung K4F6E304HB-MGCH 4GB");
 			break;
 		case LPDDR4_ICOSA_4GB_HYNIX_H9HCNNNBPUMLHR_NLE:
-			strcpy(dram_man, "Hynix H9HCNNNBPUMLHR-NLE 4GB");
+			strcpy(dram_man, "SK Hynix H9HCNNNBPUMLHR-NLE 4GB");
 			break;
 		case LPDDR4_ICOSA_4GB_MICRON_MT53B512M32D2NP_062_WTC:
 			strcpy(dram_man, "Micron MT53B512M32D2NP-062 WT:C");
@@ -450,7 +450,7 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 			strcpy(dram_man, "Samsung K4FBE3D4HM-MGXX 8GB");
 			break;
 		default:
-			strcpy(dram_man, "#FF8000 Unknown#");
+			strcpy(dram_man, "#FF8000 Unknown. This should not happen#");
 			break;
 		}
 	}
@@ -469,7 +469,7 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 			break;
 		case LPDDR4X_IOWA_4GB_HYNIX_H9HCNNNBKMMLHR_NME:
 		case LPDDR4X_HOAG_4GB_HYNIX_H9HCNNNBKMMLHR_NME:
-			strcpy(dram_man, "Hynix H9HCNNNBKMMLHR-NME 4GB");
+			strcpy(dram_man, "SK Hynix H9HCNNNBKMMLHR-NME 4GB");
 			break;
 		case LPDDR4X_IOWA_4GB_MICRON_MT53E512M32D2NP_046_WTE: // 4266Mbps.
 		case LPDDR4X_HOAG_4GB_MICRON_MT53E512M32D2NP_046_WTE: // 4266Mbps.
@@ -500,12 +500,12 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 		case LPDDR4X_HOAG_4GB_HYNIX_H9HCNNNBKMMLXR_NEE: // Replaced from Copper.
 		case LPDDR4X_AULA_4GB_HYNIX_H9HCNNNBKMMLXR_NEE: // Replaced from Copper.
 		case LPDDR4X_IOWA_4GB_HYNIX_H9HCNNNBKMMLXR_NEE: // Replaced from Copper.
-			strcpy(dram_man, "Hynix H9HCNNNBKMMLXR-NEE 4GB");
+			strcpy(dram_man, "SK Hynix H9HCNNNBKMMLXR-NEE 4GB");
 			break;
 		case LPDDR4X_IOWA_4GB_HYNIX_H54G46CYRBX267:
 		case LPDDR4X_HOAG_4GB_HYNIX_H54G46CYRBX267:
 		case LPDDR4X_AULA_4GB_HYNIX_H54G46CYRBX267:
-			strcpy(dram_man, "Hynix H54G46CYRBX267 4GB");
+			strcpy(dram_man, "SK Hynix H54G46CYRBX267 4GB");
 			break;
 		case LPDDR4X_IOWA_4GB_MICRON_MT53E512M32D1NP_046_WTB:
 		case LPDDR4X_HOAG_4GB_MICRON_MT53E512M32D1NP_046_WTB:
@@ -514,7 +514,7 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 			break;
 
 		default:
-			strcpy(dram_man, "#FF8000 Contact me!#");
+			strcpy(dram_man, "#FF8000 Open an issue on GitHub#");
 			break;
 		}
 	}
@@ -530,22 +530,22 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 	switch (burnt_fuses_hos)
 	{
 	case 0:
-		strcpy(fuses_hos_version, "#96FF00 Golden sample#");
+		strcpy(fuses_hos_version, "#96FF00 Rare Sample Firmware#");
 		break;
 	case 1:
-		strcpy(fuses_hos_version, "1.0.0");
+		strcpy(fuses_hos_version, "1.0.0 - Exploitable");
 		break;
 	case 2:
-		strcpy(fuses_hos_version, "2.0.0 - 2.3.0");
+		strcpy(fuses_hos_version, "2.0.0 - 2.3.0 - Exploitable");
 		break;
 	case 3:
-		strcpy(fuses_hos_version, "3.0.0");
+		strcpy(fuses_hos_version, "3.0.0 - Exploitable");
 		break;
 	case 4:
-		strcpy(fuses_hos_version, "3.0.1 - 3.0.2");
+		strcpy(fuses_hos_version, "3.0.1 - 3.0.2 - Exploitable");
 		break;
 	case 5:
-		strcpy(fuses_hos_version, "4.0.0 - 4.1.0");
+		strcpy(fuses_hos_version, "4.0.0 - 4.1.0 - Exploitable");
 		break;
 	case 6:
 		strcpy(fuses_hos_version, "5.0.0 - 5.1.0");
@@ -593,10 +593,10 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 		strcpy(fuses_hos_version, "19.0.0+");
 		break;
 	case 255:
-		strcpy(fuses_hos_version, "#FFD000 Overburnt#");
+		strcpy(fuses_hos_version, "#FFD000 Fuses overburnt#");
 		break;
 	default:
-		strcpy(fuses_hos_version, "#FF8000 Unknown#");
+		strcpy(fuses_hos_version, "#FF8000 Unknown. This should not happen#");
 		break;
 	}
 
@@ -675,7 +675,7 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 		break;
 */
 	case 6:
-		strcat(txt_buf, "Hynix");
+		strcat(txt_buf, "SK Hynix");
 		break;
 /*
 	case 8:
@@ -732,7 +732,7 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 		strcat(txt_buf, "Micron");
 		break;
 	default:
-		s_printf(txt_buf + strlen(txt_buf), "#FF8000 Unknown# (%d)", ram_vendor.chip1.rank0_ch0);
+		s_printf(txt_buf + strlen(txt_buf), "#FF8000 Unknown. This should not happen# (%d)", ram_vendor.chip1.rank0_ch0);
 		break;
 	}
 	s_printf(txt_buf + strlen(txt_buf), "\n#FF8000 Rev ID:#  %X.%02X #FF8000 |# %X.%02X\n#FF8000 Density:# %d",
@@ -740,19 +740,19 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 	switch ((ram_density.chip0.rank0_ch0 & 0x3C) >> 2)
 	{
 	case 2:
-		strcat(txt_buf, " x 512MB");
+		strcat(txt_buf, " x 512MB. This should not happen");
 		break;
 	case 3:
-		strcat(txt_buf, " x 768MB");
+		strcat(txt_buf, " x 768MB. This should not happen");
 		break;
 	case 4:
 		strcat(txt_buf, " x 1GB");
 		break;
 	case 5:
-		strcat(txt_buf, " x 1.5GB");
+		strcat(txt_buf, " x 1.5GB. This should not happen");
 		break;
 	case 6:
-		strcat(txt_buf, " x 2GB");
+		strcat(txt_buf, " x 2GB. This should not happen");
 		break;
 	default:
 		s_printf(txt_buf + strlen(txt_buf), " x Unk (%d)", (ram_density.chip0.rank0_ch0 & 0x3C) >> 2);
@@ -762,19 +762,19 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 	switch ((ram_density.chip1.rank0_ch0 & 0x3C) >> 2)
 	{
 	case 2:
-		strcat(txt_buf, " x 512MB");
+		strcat(txt_buf, " x 512MB. This should not happen");
 		break;
 	case 3:
-		strcat(txt_buf, " x 768MB");
+		strcat(txt_buf, " x 768MB. This should not happen");
 		break;
 	case 4:
 		strcat(txt_buf, " x 1GB");
 		break;
 	case 5:
-		strcat(txt_buf, " x 1.5GB");
+		strcat(txt_buf, " x 1.5GB. This should not happen");
 		break;
 	case 6:
-		strcat(txt_buf, " x 2GB");
+		strcat(txt_buf, " x 2GB. This should not happen");
 		break;
 	default:
 		s_printf(txt_buf + strlen(txt_buf), " x Unk (%d)", (ram_density.chip1.rank0_ch0 & 0x3C) >> 2);
@@ -819,7 +819,7 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 			strcat(txt_buf, "-???");
 			break;
 		default:
-			strcat(txt_buf, " #FFDD00 Contact me!#");
+			strcat(txt_buf, " #FFDD00 Open a GitHub issue!#");
 			break;
 		}
 		break;
@@ -846,7 +846,7 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 			strcat(txt_buf, "??");
 			break;
 		default:
-			strcat(txt_buf, " #FFDD00 Contact me!#");
+			strcat(txt_buf, " #FFDD00 Open a GitHub issue#");
 			break;
 		}
 		break;
@@ -864,13 +864,13 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 		strcat(txt_buf, "Samsung AMS699VC01");
 		break;
 	case PANEL_OEM_CLONE_6_2:
-		strcat(txt_buf, "#FFDD00 OEM Clone 6.2\"#");
+		strcat(txt_buf, "#FFDD00 Clone Display 6.2in\"#");
 		break;
 	case PANEL_OEM_CLONE_5_5:
-		strcat(txt_buf, "#FFDD00 OEM Clone 5.5\"#");
+		strcat(txt_buf, "#FFDD00 Clone Display 5.5in\"#");
 		break;
 	case PANEL_OEM_CLONE:
-		strcat(txt_buf, "#FFDD00 OEM Clone#");
+		strcat(txt_buf, "#FFDD00 Clone Display#");
 		break;
 	case 0xCCCC:
 		strcat(txt_buf, "#FFDD00 Failed to get info!#");
@@ -891,7 +891,7 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 			strcat(txt_buf, "Samsung ");
 			break;
 		}
-		strcat(txt_buf, "Unknown #FFDD00 Contact me!#");
+		strcat(txt_buf, "Unknown #FFDD00 Open an issue on GitHub!#");
 		break;
 	}
 
@@ -988,9 +988,9 @@ static lv_res_t _create_window_fuses_info_status(lv_obj_t *btn)
 
 	// Check if patched unit.
 	if (!fuse_check_patched_rcm())
-		strcat(txt_buf, "\n\n#96FF00 This unit is exploitable#\n#96FF00 to the RCM bug!#");
+		strcat(txt_buf, "\n\n#96FF00 This unit is exploitable#\n#96FF00 with the RCM bug!#");
 	else
-		strcat(txt_buf, "\n\n#FF8000 This unit is patched#\n#FF8000 to the RCM bug!#");
+		strcat(txt_buf, "\n\n#FF8000 This unit is patched#\n#FF8000 against the RCM bug!#");
 
 	lv_label_set_text(lb_desc2, txt_buf);
 
@@ -1044,7 +1044,7 @@ static lv_res_t _create_window_bootrom_info_status(lv_obj_t *btn)
 
 	u32 res = fuse_read_ipatch(_ipatch_process);
 	if (res != 0)
-		s_printf(txt_buf + strlen(txt_buf), "#FFDD00 Failed to read ipatches. Error: %d#", res);
+		s_printf(txt_buf + strlen(txt_buf), "#FFDD00 Failed to read the ipatches. Error: %d#", res);
 
 	lv_label_set_text(lb_desc, txt_buf);
 
@@ -1087,7 +1087,7 @@ static lv_res_t _create_mbox_lockpick(lv_obj_t *btn)
 	lv_mbox_set_recolor_text(mbox, true);
 
 	lv_mbox_set_text(mbox, "#FF8000 Lockpick RCM#\n\nThis will launch Lockpick RCM.\nDo you want to continue?\n\n"
-		"To return back from lockpick use\n#96FF00 Reboot to hekate#.");
+		"To return back from Lockpick use the \n#96FF00 Reboot to hekate# option.");
 
 	lv_mbox_add_btns(mbox, mbox_btn_map, _launch_lockpick_action);
 	lv_obj_set_width(mbox, LV_HOR_RES / 9 * 5);
@@ -1190,7 +1190,7 @@ static lv_res_t _create_mbox_emmc_sandisk_report(lv_obj_t * btn)
 		//"#FF8000 VD Recover Operations:# %d\n"
 		"#FF8000 Total Writes SLC:#      %d MB\n"
 		"#FF8000 Total Writes MLC:#      %d MB\n"
-		"#FF8000 BigFile limit status:#  %d\n"
+		"#FF8000 Big File limit status:#  %d\n"
 		"#FF8000 Average Erases Hybrid:# %d",
 
 		//rpt->avg_erase_cycles_sys,
@@ -1242,7 +1242,7 @@ static lv_res_t _create_mbox_emmc_sandisk_report(lv_obj_t * btn)
 			"#FF8000 Uncorrectable ECC:#     %d\n"
 			"#FF8000 Temperature Now:#       %d oC\n"
 			//"#FF8000 Temperature Min:#       %d oC\n"
-			"#FF8000 Temperature Max:#       %d oC\n"
+			"#FF8000 Temperature Maximum:#       %d oC\n"
 			"#FF8000 Health Level EUDA:#     %d%%\n"
 			//"#FF8000 Health Level SYS:#      %d%%\n"
 			"#FF8000 Health Level MLC:#      %d%%",
@@ -1349,7 +1349,7 @@ static lv_res_t _create_mbox_benchmark(bool sd_bench)
 
 	if (res)
 	{
-		lv_mbox_set_text(mbox, "#FFDD00 Failed to init Storage!#");
+		lv_mbox_set_text(mbox, "#FFDD00 Failed to init Storage. This might be a hardware issue!#");
 		goto out;
 	}
 
@@ -1594,7 +1594,7 @@ static lv_res_t _create_window_emmc_info_status(lv_obj_t *btn)
 
 	if (!emmc_initialize(false))
 	{
-		lv_label_set_text(lb_desc, "#FFDD00 Failed to init eMMC!#");
+		lv_label_set_text(lb_desc, "#FFDD00 Failed to init eMMC chip!#");
 		lv_obj_set_width(lb_desc, lv_obj_get_width(desc));
 		emmc_errors = emmc_get_error_count();
 
@@ -1622,9 +1622,12 @@ static lv_res_t _create_window_emmc_info_status(lv_obj_t *btn)
 		strcat(txt_buf, "Samsung ");
 		break;
 	case 0x45: // Unofficial.
-		strcat(txt_buf, "SanDisk ");
+		strcat(txt_buf, "SanDisk (Unofficial) ");
 		lv_win_add_btn(win, NULL, SYMBOL_FILE_ALT" Device Report", _create_mbox_emmc_sandisk_report);
 		break;
+	case 0x89:
+		strcat(txt_buf, "Silicon Motion (Unofficial) ");
+		break;
 	case 0x90:
 		strcat(txt_buf, "SK Hynix ");
 		break;
@@ -1719,7 +1722,7 @@ static lv_res_t _create_window_emmc_info_status(lv_obj_t *btn)
 		"Month/Year:\n\n"
 		"#00DDFF Ext CSD:#\n"
 		"Cmd Classes:\n"
-		"Max Rate:\n"
+		"Maximum Rate:\n"
 		"Current Rate:\n"
 		"Type Support:\n\n"
 		"Write Cache:\n"
@@ -1787,7 +1790,7 @@ static lv_res_t _create_window_emmc_info_status(lv_obj_t *btn)
 		idx++;
 	}
 	if (!idx)
-		strcat(txt_buf, "#FFDD00 Partition table is empty!#");
+		strcat(txt_buf, "#FFDD00 GPP Partition table is empty!#");
 
 	emmc_gpt_free(&gpt);
 
@@ -1811,10 +1814,10 @@ out_error:
 		lv_mbox_set_recolor_text(mbox, true);
 
 		s_printf(txt_buf,
-			"#FF8000 eMMC Issues Check#\n\n"
-			"#FFDD00 Your eMMC is initialized in slower mode,#\n"
-			"#FFDD00 or init/read/write errors occurred!#\n"
-			"#FFDD00 This might mean hardware issues!#\n\n"
+			"#FF8000 eMMC Issue Detected#\n\n"
+			"#FFDD00 Your eMMC is initialized in a slow mode,#\n"
+			"#FFDD00 or an init/read/write error occurred!#\n"
+			"#FFDD00 This might be a hardware issue!#\n\n"
 			"#00DDFF Bus Speed:# %d MB/s\n\n"
 			"#00DDFF SDMMC4 Errors:#\n"
 			"Init fails: %d\n"
@@ -1890,7 +1893,7 @@ static lv_res_t _create_window_sdcard_info_status(lv_obj_t *btn)
 	switch (sd_storage.cid.manfid)
 	{
 	case 0x00:
-		strcat(txt_buf, "Fake ");
+		strcat(txt_buf, "Fake SD Card");
 		break;
 	case 0x01:
 		strcat(txt_buf, "Panasonic ");
@@ -2201,13 +2204,13 @@ static lv_res_t _create_window_battery_status(lv_obj_t *btn)
 
 	lv_label_set_static_text(lb_desc,
 		"#00DDFF Fuel Gauge IC Info:#\n"
-		"Capacity now:\n"
-		"Capacity full:\n"
+		"Current Capacity:\n"
+		"Full Capacity:\n"
 		"Capacity (design):\n"
 		"Current now:\n"
 		"Current average:\n"
-		"Voltage now:\n"
-		"Voltage open-circuit:\n"
+		"Current Voltade:\n"
+		"Open-circuit voltage:\n"
 		"Min voltage reached:\n"
 		"Max voltage reached:\n"
 		"Empty voltage:\n"
@@ -2309,9 +2312,9 @@ static lv_res_t _create_window_battery_status(lv_obj_t *btn)
 		"#00DDFF Battery Charger IC Info:#\n"
 		"Input current limit:\n"
 		"System voltage limit:\n"
-		"Charge current limit:\n"
-		"Charge voltage limit:\n"
-		"Charge status:\n"
+		"Charging current limit:\n"
+		"Charging voltage limit:\n"
+		"Charging status:\n"
 		"Temperature status:\n\n"
 		"#00DDFF USB-PD IC Info:#\n"
 		"Connection status:\n"
@@ -2353,7 +2356,7 @@ static lv_res_t _create_window_battery_status(lv_obj_t *btn)
 		strcat(txt_buf, "Fast charging\n");
 		break;
 	case 3:
-		strcat(txt_buf, "Charge terminated\n");
+		strcat(txt_buf, "Charging terminated\n");
 		break;
 	default:
 		s_printf(txt_buf + strlen(txt_buf), "Unknown (%d)\n", value);
@@ -2524,8 +2527,8 @@ void create_tab_info(lv_theme_t *th, lv_obj_t *parent)
 	if (lockpick_found)
 	{
 		lv_label_set_static_text(label_txt2,
-			"View Ipatches and dump the unpatched and patched versions\nof BootROM.\n"
-			"Or dump every single key via #C7EA46 Lockpick RCM#.\n");
+			"View the Ipatches and dump the unpatched and patched versions the \nof BootROM,\n"
+			"Or dump every single key with #C7EA46 Lockpick RCM#.\n");
 	}
 	else
 	{
@@ -2564,8 +2567,8 @@ void create_tab_info(lv_theme_t *th, lv_obj_t *parent)
 	lv_label_set_recolor(label_txt4, true);
 	lv_label_set_static_text(label_txt4,
 		"View and dump the cached #C7EA46 Fuses# and #C7EA46 KFuses#.\n"
-		"Fuses contain info about the SoC/SKU and KFuses HDCP keys.\n"
-		"You can also see info about #C7EA46 DRAM#, #C7EA46 Screen# and #C7EA46 Touch panel#.");
+		"Fuses contain information about the SoC/SKU and KFuses HDCP keys.\n"
+		"You can also see information about #C7EA46 DRAM#, #C7EA46 Screen# and #C7EA46 Touch panel#.");
 	lv_obj_set_style(label_txt4, &hint_small_style);
 	lv_obj_align(label_txt4, btn3, LV_ALIGN_OUT_BOTTOM_LEFT, 0, LV_DPI / 3);
 
@@ -2613,8 +2616,8 @@ void create_tab_info(lv_theme_t *th, lv_obj_t *parent)
 	lv_obj_t *label_txt5 = lv_label_create(h2, NULL);
 	lv_label_set_recolor(label_txt5, true);
 	lv_label_set_static_text(label_txt5,
-		"View info about the eMMC or microSD and their partition list.\n"
-		"Additionally you can benchmark read speeds.");
+		"View info about the eMMC chip or microSD cardand their partition list.\n"
+		"Additionally you can benchmark their speeds.");
 	lv_obj_set_style(label_txt5, &hint_small_style);
 	lv_obj_align(label_txt5, btn5, LV_ALIGN_OUT_BOTTOM_LEFT, 0, LV_DPI / 3);
 
@@ -2638,8 +2641,8 @@ void create_tab_info(lv_theme_t *th, lv_obj_t *parent)
 	lv_obj_t *label_txt6 = lv_label_create(h2, NULL);
 	lv_label_set_recolor(label_txt6, true);
 	lv_label_set_static_text(label_txt6,
-		"View battery and battery charger related info.\n"
-		"Additionally you can dump battery charger's registers.\n");
+		"View information related to the battery.\n"
+		"Also enables dumping the battery charger registers.\n");
 	lv_obj_set_style(label_txt6, &hint_small_style);
 	lv_obj_align(label_txt6, btn7, LV_ALIGN_OUT_BOTTOM_LEFT, 0, LV_DPI / 3);
 }
diff --git a/nyx/nyx_gui/frontend/gui_options.c b/nyx/nyx_gui/frontend/gui_options.c
index 66e4014..b855494 100644
--- a/nyx/nyx_gui/frontend/gui_options.c
+++ b/nyx/nyx_gui/frontend/gui_options.c
@@ -25,7 +25,7 @@
 #include <libs/lvgl/lvgl.h>
 
 #define CLOCK_MIN_YEAR 2024
-#define CLOCK_MAX_YEAR (CLOCK_MIN_YEAR + 10)
+#define CLOCK_MAX_YEAR (CLOCK_MIN_YEAR + 50)
 #define CLOCK_YEARLIST "2024\n2025\n2026\n2027\n2028\n2029\n2030\n2031\n2032\n2033\n2034"
 
 extern hekate_config h_cfg;
@@ -209,7 +209,7 @@ static void _create_autoboot_window()
 	lv_label_set_static_text(label_sep, "");
 
 	lv_obj_t *label_txt = lv_label_create(h1, NULL);
-	lv_label_set_static_text(label_txt, "Main configurations");
+	lv_label_set_static_text(label_txt, "Main configuration");
 	lv_obj_set_style(label_txt, lv_theme_get_current()->label.prim);
 	lv_obj_align(label_txt, label_sep, LV_ALIGN_OUT_BOTTOM_LEFT, LV_DPI / 4, -(LV_DPI / 4));
 
@@ -366,9 +366,9 @@ static lv_res_t _save_nyx_options_action(lv_obj_t *btn)
 	nyx_changes_made = false;
 
 	if (res)
-		lv_mbox_set_text(mbox, "#FF8000 Nyx Configuration#\n\n#96FF00 The configuration was saved to sd card!#");
+		lv_mbox_set_text(mbox, "#FF8000 Nyx Configuration#\n\n#96FF00 The updated configuration has been saved to the microSD card!#");
 	else
-		lv_mbox_set_text(mbox, "#FF8000 Nyx Configuration#\n\n#FFDD00 Failed to save the configuration#\n#FFDD00 to sd card!#");
+		lv_mbox_set_text(mbox, "#FF8000 Nyx Configuration#\n\n#FFDD00 Failed to save the configuration#\n#FFDD00 to microSD card!#");
 	lv_mbox_add_btns(mbox, mbox_btn_map, NULL);
 	lv_obj_align(mbox, NULL, LV_ALIGN_CENTER, 0, 0);
 	lv_obj_set_top(mbox, true);
@@ -618,10 +618,9 @@ static lv_res_t _create_window_nyx_colors(lv_obj_t *btn)
 	lv_obj_t *lbl_test = lv_label_create(h2, NULL);
 	lv_label_set_long_mode(lbl_test, LV_LABEL_LONG_BREAK);
 	lv_label_set_static_text(lbl_test,
-		"Lorem ipsum dolor sit amet, consectetur adipisicing elit, "
-		"sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. "
-		"Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris "
-		"nisi ut aliquip ex ea commodo consequat.");
+		"This is a test message to show text colors, "
+		"The quick brown fox jumped over the lazy dog. "
+		"123456789 !@#$%^&*()-_=+[]\;'./,{}|:"<>? ");
 	lv_obj_set_width(lbl_test, lv_obj_get_width(h2) - LV_DPI * 6 / 10);
 	lv_obj_align(lbl_test, lbl_sample, LV_ALIGN_OUT_BOTTOM_LEFT, 0, LV_DPI / 5);
 	color_test.label = lbl_test;
@@ -745,7 +744,7 @@ static lv_res_t _create_mbox_clock_edit(lv_obj_t *btn)
 	lv_mbox_set_recolor_text(mbox, true);
 	lv_obj_set_width(mbox, LV_HOR_RES / 9 * 6);
 
-	lv_mbox_set_text(mbox, "Enter #C7EA46 Date# and #C7EA46 Time# for Nyx\nThis will not alter the actual HW clock!");
+	lv_mbox_set_text(mbox, "Enter #C7EA46 Date# and #C7EA46 Time# for Nyx\nThis will not alter the clock outside of Nyx!");
 
 	// Get current time.
 	rtc_time_t time;
@@ -892,6 +891,7 @@ save_data:
 
 		if (!nx_hoag)
 		{
+			
 			// Save binary dump.
 			memcpy(data, &jc_pad->bt_conn_l, sizeof(jc_bt_conn_t));
 			memcpy(data + sizeof(jc_bt_conn_t), &jc_pad->bt_conn_r, sizeof(jc_bt_conn_t));
@@ -1049,7 +1049,7 @@ disabled_or_cal0_issue:;
 
 			// Check if pairing info was found.
 			if (joycon_found == 2)
-				strcat(txt_buf, "#C7EA46 Success!#\n#C7EA46 Found 2 out of 2 Joy-Con pairing data!#\n");
+				strcat(txt_buf, "#C7EA46 Success!#\n#C7EA46 Found Joy-Con pairing data!#\n");
 			else
 			{
 				s_printf(txt_buf + strlen(txt_buf), "#FF8000 Failed!#\n#FF8000 Warning:# Found #FFDD00 %d out of 2# pairing data!\n", joycon_found);
@@ -1061,24 +1061,24 @@ disabled_or_cal0_issue:;
 				strcat(txt_buf, "#C7EA46 Both pairing data are HOS based!#");
 			else if (!is_l_hos && is_r_hos)
 			{
-				strcat(txt_buf, "#FF8000 Warning:# #FFDD00 Left# pairing data is not HOS based!");
+				strcat(txt_buf, "#FF8000 Warning:# #FFDD00 Left# pairing data is not Horizon Os based! Re-pair Joy-Cons to fix");
 				success = false;
 			}
 			else if (is_l_hos && !is_r_hos)
 			{
-				strcat(txt_buf, "#FF8000 Warning:# #FFDD00 Right# pairing data is not HOS based!");
+				strcat(txt_buf, "#FF8000 Warning:# #FFDD00 Right# pairing data is not Horizon OS based! Re-pair Joy-Cons to fix");
 				success = false;
 			}
 			else
 			{
-				strcat(txt_buf, "#FF8000 Warning:# #FFDD00 No# pairing data is HOS based!");
+				strcat(txt_buf, "#FF8000 Warning:# #FFDD00 No# pairing data is Horizon OS based! Re-pair Joy-Cons to fix.");
 				success = false;
 			}
 
 			if (!success)
 				strcat(txt_buf,
-					"\n\n#FFDD00 Make sure that both Joy-Con are connected,#\n"
-					"#FFDD00 and that you paired them in HOS!#");
+					"\n\n#FFDD00 Make sure that both Joy-Cons are connected,#\n"
+					"#FFDD00 and that you have paired them in Horizon OS!#");
 
 			if (cal_error)
 				s_printf(txt_buf + strlen(txt_buf), "\n\n#FF8000 Warning: Failed (%d) to get IMU calibration!#", cal_error);
@@ -1276,9 +1276,9 @@ lv_res_t create_win_nyx_options(lv_obj_t *parrent_btn)
 	label_txt2 = lv_label_create(sw_h2, NULL);
 	lv_label_set_recolor(label_txt2, true);
 	lv_label_set_static_text(label_txt2,
-		"Sets the boot entries per line to 5. (Default is 4)\n"
-		"#C7EA46 This allows a total of 10 boot entries to be shown in Launch#\n"
-		"#C7EA46 and More Configs sections.#\n\n\n");
+		"Sets the boot entries visible per line to 5. (Default is 4)\n"
+		"#C7EA46 This allows a total of 10 boot entries to be shown in the Launch#\n"
+		"#C7EA46 and More Configs menus.#\n\n\n");
 	lv_obj_set_style(label_txt2, &hint_small_style);
 	lv_obj_align(label_txt2, btn2, LV_ALIGN_OUT_BOTTOM_LEFT, LV_DPI / 4, LV_DPI / 12);
 
@@ -1325,7 +1325,7 @@ lv_res_t create_win_nyx_options(lv_obj_t *parrent_btn)
 
 	label_txt2 = lv_label_create(sw_h3, NULL);
 	lv_label_set_static_text(label_txt2, "Set the type of data verification done for backup and restore.\n"
-		"Can be canceled without losing the backup/restore.\n");
+		"Can be changed without losing the backup/restore.\n");
 	lv_obj_set_style(label_txt2, &hint_small_style);
 	lv_obj_align(label_txt2, label_txt, LV_ALIGN_OUT_BOTTOM_LEFT, 0, LV_DPI / 4);
 
@@ -1461,8 +1461,8 @@ void create_tab_options(lv_theme_t *th, lv_obj_t *parent)
 	label_txt2 = lv_label_create(l_cont, NULL);
 	lv_label_set_recolor(label_txt2, true);
 	lv_label_set_static_text(label_txt2,
-		"Set how long to show bootlogo when autoboot is enabled.\n"
-		"#C7EA46 You can press# #FF8000 VOL-# #C7EA46 during that time to enter hekate's menu.#\n");
+		"Sets how long to show bootlogo when autoboot is enabled.\n"
+		"#C7EA46 You can press# #FF8000 VOL-# #C7EA46 during that time to enter the hekate menu.#\n");
 	lv_obj_set_style(label_txt2, &hint_small_style);
 	lv_obj_align(label_txt2, label_txt, LV_ALIGN_OUT_BOTTOM_LEFT, 0, LV_DPI / 4);
 
@@ -1477,8 +1477,8 @@ void create_tab_options(lv_theme_t *th, lv_obj_t *parent)
 	label_txt2 = lv_label_create(sw_h2, NULL);
 	lv_label_set_recolor(label_txt2, true);
 	lv_label_set_static_text(label_txt2,
-		"It checks fuses and applies the patch automatically\n"
-		"if higher firmware. It is now a global config and set\n"
+		"This option checks fuses and applies the patch automatically\n"
+		"if a higher firmwareis present. It is now a global config and set\n"
 		"at auto by default. (ON: Auto)\n\n\n");
 	lv_obj_set_style(label_txt2, &hint_small_style);
 	lv_obj_align(label_txt2, btn2, LV_ALIGN_OUT_BOTTOM_LEFT, LV_DPI / 4, LV_DPI / 12);
@@ -1493,7 +1493,7 @@ void create_tab_options(lv_theme_t *th, lv_obj_t *parent)
 
 	label_txt2 = lv_label_create(sw_h3, NULL);
 	lv_label_set_static_text(label_txt2,
-		"When Shutdown is used from HOS, the device wakes up after\n"
+		"When Shutdown is used from Horizon OS, the device wakes up after\n"
 		"15s. Enable this to automatically power off on the next\npayload injection.");
 	lv_obj_set_style(label_txt2, &hint_small_style);
 	lv_obj_align(label_txt2, btn3, LV_ALIGN_OUT_BOTTOM_LEFT, LV_DPI / 4, LV_DPI / 12);