l4t: refactor bpmp-fw defines for T210B01

This commit is contained in:
CTCaer 2023-06-09 10:50:29 +03:00
parent 3f9c7a7da6
commit 4f52e1f24a

View file

@ -79,50 +79,50 @@
#define MTCTABLE_BASE (SECFW_BASE + SZ_512K) // 512KB after SECFW_BASE.
// Secure Elements addresses for T210B01.
#define BPMPFW_BASE (SECFW_BASE) // !! DTS carveout-start must match !!
#define BPMPFW_ENTRYPOINT (BPMPFW_BASE + 0x40) // Used internally also.
#define BPMPFW_HEAP_BASE (BPMPFW_BASE + SZ_256K - SZ_1K) // 255KB after BPMPFW_BASE.
#define BPMPFW_EDTB_BASE (BPMPFW_BASE + SZ_1M - 0) // Top BPMPFW carveout minus EMC DTB size.
#define BPMPFW_ADTB_BASE (BPMPFW_BASE + 0x26008) // Attached BPMP-FW DTB address.
#define SC7EXIT_B01_BASE (BPMPFW_HEAP_BASE - SZ_4K) // 4KB before BPMP heap.
#define BPMPFW_B01_BASE (SECFW_BASE) // !! DTS carveout-start must match !!
#define BPMPFW_B01_ENTRYPOINT (BPMPFW_B01_BASE + 0x40) // Used internally also.
#define BPMPFW_B01_HEAP_BASE (BPMPFW_B01_BASE + SZ_256K - SZ_1K) // 255KB after BPMPFW_B01_BASE.
#define BPMPFW_B01_EDTB_BASE (BPMPFW_B01_BASE + SZ_1M - 0) // Top BPMPFW carveout minus EMC DTB size.
#define BPMPFW_B01_ADTB_BASE (BPMPFW_B01_BASE + 0x26008) // Attached BPMP-FW DTB address.
#define SC7EXIT_B01_BASE (BPMPFW_B01_HEAP_BASE - SZ_4K) // 4KB before BPMP heap.
// BPMP-FW defines. Offsets are 0xD8 below real main binary.
#define BPMPFW_DTB_ADDR (BPMPFW_BASE + 0x14) // u32. DTB address if not attached.
#define BPMPFW_CC_INIT_OP (BPMPFW_BASE + 0x17324) // u8. Initial table training OP. 0: OP_SWITCH, 1: OP_TRAIN, 2: OP_TRAIN_SWITCH. Default: OP_TRAIN.
#define BPMPFW_LOGLEVEL (BPMPFW_BASE + 0x2547C) // u32. Log level. Default 3.
#define BPMPFW_LOGLEVEL (BPMPFW_BASE + 0x2547C) // u32. Log level. Default 3.
#define BPMPFW_CC_PT_TIME (BPMPFW_BASE + 0x25644) // u32. Periodic training period (in ms). Default 100 ms.
#define BPMPFW_CC_DEBUG (BPMPFW_BASE + 0x257F8) // u32. EMC Clock Change debug mask. Default: 0x50000101.
#define BPMPFW_B01_DTB_ADDR (BPMPFW_B01_BASE + 0x14) // u32. DTB address if not attached.
#define BPMPFW_B01_CC_INIT_OP (BPMPFW_B01_BASE + 0x17324) // u8. Initial table training OP. 0: OP_SWITCH, 1: OP_TRAIN, 2: OP_TRAIN_SWITCH. Default: OP_TRAIN.
#define BPMPFW_B01_LOGLEVEL (BPMPFW_B01_BASE + 0x2547C) // u32. Log level. Default 3.
#define BPMPFW_B01_LOGLEVEL (BPMPFW_B01_BASE + 0x2547C) // u32. Log level. Default 3.
#define BPMPFW_B01_CC_PT_TIME (BPMPFW_B01_BASE + 0x25644) // u32. Periodic training period (in ms). Default 100 ms.
#define BPMPFW_B01_CC_DEBUG (BPMPFW_B01_BASE + 0x257F8) // u32. EMC Clock Change debug mask. Default: 0x50000101.
// BPMP-FW attached DTB defines. Can be generalized.
#define BPMPFW_DTB_EMC_ENTRIES 4
#define BPMPFW_DTB_SERIAL_PORT_VAL (BPMPFW_ADTB_BASE + 0x5B) // u8. DTB UART port offset. 0: Disabled.
#define BPMPFW_DTB_SET_SERIAL_PORT(port) (*(u8 *)BPMPFW_DTB_SERIAL_PORT_VAL = port)
#define BPMPFW_DTB_EMC_TBL_OFF (BPMPFW_ADTB_BASE + 0xA0)
#define BPMPFW_DTB_EMC_TBL_SZ 0x1120
#define BPMPFW_DTB_EMC_NAME_VAL 0xA
#define BPMPFW_DTB_EMC_ENABLE_OFF 0x20
#define BPMPFW_DTB_EMC_VALUES_OFF 0x4C
#define BPMPFW_DTB_EMC_FREQ_VAL 0x8C
#define BPMPFW_DTB_EMC_SCC_OFF 0x108C
#define BPMPFW_DTB_EMC_PLLM_DIVM_VAL 0x10A4
#define BPMPFW_DTB_EMC_PLLM_DIVN_VAL 0x10A8
#define BPMPFW_DTB_EMC_PLLM_DIVP_VAL 0x10AC
#define BPMPFW_DTB_EMC_TBL_START(idx) (BPMPFW_DTB_EMC_TBL_OFF + BPMPFW_DTB_EMC_TBL_SZ * (idx))
#define BPMPFW_DTB_EMC_TBL_SET_VAL(idx, off, val) (*(u32 *)(BPMPFW_DTB_EMC_TBL_START(idx) + (off)) = (val))
#define BPMPFW_DTB_EMC_TBL_SET_FREQ(idx, freq) (*(u32 *)(BPMPFW_DTB_EMC_TBL_START(idx) + BPMPFW_DTB_EMC_FREQ_VAL) = (freq))
#define BPMPFW_DTB_EMC_TBL_SCC_OFFSET(idx) ((void *)(BPMPFW_DTB_EMC_TBL_START(idx) + BPMPFW_DTB_EMC_SCC_OFF))
#define BPMPFW_DTB_EMC_TBL_SET_PLLM_DIVN(idx, n) (*(u32 *)(BPMPFW_DTB_EMC_TBL_START(idx) + BPMPFW_DTB_EMC_PLLM_DIVN_VAL) = (n))
#define BPMPFW_DTB_EMC_TBL_SET_NAME(idx, name) (strcpy((char *)(BPMPFW_DTB_EMC_TBL_START(idx) + BPMPFW_DTB_EMC_NAME_VAL), (name)))
#define BPMPFW_DTB_EMC_TBL_ENABLE(idx) (*(char *)(BPMPFW_DTB_EMC_TBL_START(idx) + BPMPFW_DTB_EMC_ENABLE_OFF) = 'n')
#define BPMPFW_DTB_EMC_TBL_OFFSET(idx) ((void *)(BPMPFW_DTB_EMC_TBL_START(idx) + BPMPFW_DTB_EMC_VALUES_OFF))
#define BPMPFW_B01_DTB_EMC_ENTRIES 4
#define BPMPFW_B01_DTB_SERIAL_PORT_VAL (BPMPFW_B01_ADTB_BASE + 0x5B) // u8. DTB UART port offset. 0: Disabled.
#define BPMPFW_B01_DTB_SET_SERIAL_PORT(port) (*(u8 *)BPMPFW_B01_DTB_SERIAL_PORT_VAL = port)
#define BPMPFW_B01_DTB_EMC_TBL_OFF (BPMPFW_B01_ADTB_BASE + 0xA0)
#define BPMPFW_B01_DTB_EMC_TBL_SZ 0x1120
#define BPMPFW_B01_DTB_EMC_NAME_VAL 0xA
#define BPMPFW_B01_DTB_EMC_ENABLE_OFF 0x20
#define BPMPFW_B01_DTB_EMC_VALUES_OFF 0x4C
#define BPMPFW_B01_DTB_EMC_FREQ_VAL 0x8C
#define BPMPFW_B01_DTB_EMC_SCC_OFF 0x108C
#define BPMPFW_B01_DTB_EMC_PLLM_DIVM_VAL 0x10A4
#define BPMPFW_B01_DTB_EMC_PLLM_DIVN_VAL 0x10A8
#define BPMPFW_B01_DTB_EMC_PLLM_DIVP_VAL 0x10AC
#define BPMPFW_B01_DTB_EMC_TBL_START(idx) (BPMPFW_B01_DTB_EMC_TBL_OFF + BPMPFW_B01_DTB_EMC_TBL_SZ * (idx))
#define BPMPFW_B01_DTB_EMC_TBL_SET_VAL(idx, off, val) (*(u32 *)(BPMPFW_B01_DTB_EMC_TBL_START(idx) + (off)) = (val))
#define BPMPFW_B01_DTB_EMC_TBL_SET_FREQ(idx, freq) (*(u32 *)(BPMPFW_B01_DTB_EMC_TBL_START(idx) + BPMPFW_B01_DTB_EMC_FREQ_VAL) = (freq))
#define BPMPFW_B01_DTB_EMC_TBL_SCC_OFFSET(idx) ((void *)(BPMPFW_B01_DTB_EMC_TBL_START(idx) + BPMPFW_B01_DTB_EMC_SCC_OFF))
#define BPMPFW_B01_DTB_EMC_TBL_SET_PLLM_DIVN(idx, n) (*(u32 *)(BPMPFW_B01_DTB_EMC_TBL_START(idx) + BPMPFW_B01_DTB_EMC_PLLM_DIVN_VAL) = (n))
#define BPMPFW_B01_DTB_EMC_TBL_SET_NAME(idx, name) (strcpy((char *)(BPMPFW_B01_DTB_EMC_TBL_START(idx) + BPMPFW_B01_DTB_EMC_NAME_VAL), (name)))
#define BPMPFW_B01_DTB_EMC_TBL_ENABLE(idx) (*(char *)(BPMPFW_B01_DTB_EMC_TBL_START(idx) + BPMPFW_B01_DTB_EMC_ENABLE_OFF) = 'n')
#define BPMPFW_B01_DTB_EMC_TBL_OFFSET(idx) ((void *)(BPMPFW_B01_DTB_EMC_TBL_START(idx) + BPMPFW_B01_DTB_EMC_VALUES_OFF))
// MTC table defines for T210B01.
#define BPMPFW_MTC_TABLE_BASE 0xA0000000
#define BPMPFW_MTC_FREQ_TABLE_SIZE 4300
#define BPMPFW_MTC_TABLE_SIZE (BPMPFW_MTC_FREQ_TABLE_SIZE * 3)
#define BPMPFW_MTC_TABLE(idx) (BPMPFW_MTC_TABLE_BASE + BPMPFW_MTC_TABLE_SIZE * (idx))
#define BPMPFW_MTC_TABLE_OFFSET(idx, fidx) ((void *)(BPMPFW_MTC_TABLE(idx) + BPMPFW_MTC_FREQ_TABLE_SIZE * (fidx)))
#define BPMPFW_B01_MTC_TABLE_BASE 0xA0000000
#define BPMPFW_B01_MTC_FREQ_TABLE_SIZE 4300
#define BPMPFW_B01_MTC_TABLE_SIZE (BPMPFW_B01_MTC_FREQ_TABLE_SIZE * 3)
#define BPMPFW_B01_MTC_TABLE(idx) (BPMPFW_B01_MTC_TABLE_BASE + BPMPFW_B01_MTC_TABLE_SIZE * (idx))
#define BPMPFW_B01_MTC_TABLE_OFFSET(idx, fidx) ((void *)(BPMPFW_B01_MTC_TABLE(idx) + BPMPFW_B01_MTC_FREQ_TABLE_SIZE * (fidx)))
// BL31 Enable IRAM based config.
#define BL31_IRAM_PARAMS 0x4D415249 // "IRAM".
@ -281,7 +281,7 @@ typedef struct _l4t_ctxt_t
#define DRAM_T210_OC_VOLTAGE 1187500
#define DRAM_T210_OC_THRESHOLD_FREQ 1862400
#define DRAM_TBL_PROVIDED_MAX_FREQ 1600000
#define DRAM_T210B01_TBL_MAX_FREQ 1600000
// JEDEC frequency table.
static const u32 ram_jd_t210b01[] = {
@ -308,8 +308,8 @@ static const l4t_fw_t l4t_fw[] = {
{ SC7ENTRY_BASE, "sc7entry.bin" },
{ SC7EXIT_BASE, "sc7exit.bin" },
{ SC7EXIT_B01_BASE, "sc7exit_b01.bin" },
{ BPMPFW_BASE, "bpmpfw_b01.bin" },
{ BPMPFW_MTC_TABLE_BASE, "mtc_tbl_b01.bin" },
{ BPMPFW_B01_BASE, "bpmpfw_b01.bin" },
{ BPMPFW_B01_MTC_TABLE_BASE, "mtc_tbl_b01.bin" },
};
enum {
@ -318,8 +318,8 @@ enum {
SC7ENTRY_FW = 2,
SC7EXIT_FW = 3,
SC7EXIT_B01_FW = 4,
BPMPFW_FW = 5,
BPMPFW_MTC_TBL = 6
BPMPFW_B01_FW = 5,
BPMPFW_B01_MTC_TBL = 6
};
static void _l4t_crit_error(const char *text)
@ -771,39 +771,39 @@ static void _l4t_late_hw_config(bool t210b01)
#endif
}
static void _l4t_bpmpfw_config(l4t_ctxt_t *ctxt)
static void _l4t_bpmpfw_b01_config(l4t_ctxt_t *ctxt)
{
char *ram_oc_txt = ctxt->ram_oc_txt;
u32 ram_oc_freq = ctxt->ram_oc_freq;
u32 ram_oc_divn = 0;
// Set default parameters.
*(u32 *)BPMPFW_DTB_ADDR = 0;
*(u8 *)BPMPFW_CC_INIT_OP = OP_TRAIN;
*(u32 *)BPMPFW_CC_PT_TIME = 100;
*(u32 *)BPMPFW_B01_DTB_ADDR = 0;
*(u8 *)BPMPFW_B01_CC_INIT_OP = OP_TRAIN;
*(u32 *)BPMPFW_B01_CC_PT_TIME = 100;
#if DEBUG_LOG_BPMPFW
// Set default debug parameters.
*(u32 *)BPMPFW_LOGLEVEL = 3;
*(u32 *)BPMPFW_CC_DEBUG = 0x50000101;
*(u32 *)BPMPFW_B01_LOGLEVEL = 3;
*(u32 *)BPMPFW_B01_CC_DEBUG = 0x50000101;
// Set serial debug port.
if (*(u32 *)BPMPFW_ADTB_BASE == DTB_MAGIC)
BPMPFW_DTB_SET_SERIAL_PORT(ctxt->serial_port);
if (*(u32 *)BPMPFW_B01_ADTB_BASE == DTB_MAGIC)
BPMPFW_B01_DTB_SET_SERIAL_PORT(ctxt->serial_port);
#endif
// Set and copy MTC tables.
u32 mtc_idx = mtc_table_idx_t210b01[fuse_read_dramid(true)];
for (u32 i = 0; i < 3; i++)
{
minerva_sdmmc_la_program(BPMPFW_MTC_TABLE_OFFSET(mtc_idx, i), true);
memcpy(BPMPFW_DTB_EMC_TBL_OFFSET(i), BPMPFW_MTC_TABLE_OFFSET(mtc_idx, i), BPMPFW_MTC_FREQ_TABLE_SIZE);
minerva_sdmmc_la_program(BPMPFW_B01_MTC_TABLE_OFFSET(mtc_idx, i), true);
memcpy(BPMPFW_B01_DTB_EMC_TBL_OFFSET(i), BPMPFW_B01_MTC_TABLE_OFFSET(mtc_idx, i), BPMPFW_B01_MTC_FREQ_TABLE_SIZE);
}
if (ram_oc_freq > DRAM_TBL_PROVIDED_MAX_FREQ)
if (ram_oc_freq > DRAM_T210B01_TBL_MAX_FREQ)
{
// Final table.
const u32 tbl_idx = BPMPFW_DTB_EMC_ENTRIES - 1;
const u32 tbl_idx = BPMPFW_B01_DTB_EMC_ENTRIES - 1;
// Set Overclock.
for (u32 i = 0; i < ARRAY_SIZE(ram_jd_t210b01); i++)
@ -827,12 +827,12 @@ static void _l4t_bpmpfw_config(l4t_ctxt_t *ctxt)
}
// Copy table and set parameters.
memcpy(BPMPFW_DTB_EMC_TBL_OFFSET(tbl_idx), BPMPFW_MTC_TABLE_OFFSET(mtc_idx, 2), BPMPFW_MTC_FREQ_TABLE_SIZE);
memcpy(BPMPFW_B01_DTB_EMC_TBL_OFFSET(tbl_idx), BPMPFW_B01_MTC_TABLE_OFFSET(mtc_idx, 2), BPMPFW_B01_MTC_FREQ_TABLE_SIZE);
BPMPFW_DTB_EMC_TBL_SET_NAME(tbl_idx, ram_oc_txt);
BPMPFW_DTB_EMC_TBL_SET_FREQ(tbl_idx, ram_oc_freq);
BPMPFW_B01_DTB_EMC_TBL_SET_NAME(tbl_idx, ram_oc_txt);
BPMPFW_B01_DTB_EMC_TBL_SET_FREQ(tbl_idx, ram_oc_freq);
pll_spread_spectrum_t210b01_t *ssc = BPMPFW_DTB_EMC_TBL_SCC_OFFSET(tbl_idx);
pll_spread_spectrum_t210b01_t *ssc = BPMPFW_B01_DTB_EMC_TBL_SCC_OFFSET(tbl_idx);
if (ram_oc_divn <= DRAM_T210B01_SSC_PARAMS)
{
@ -852,13 +852,13 @@ static void _l4t_bpmpfw_config(l4t_ctxt_t *ctxt)
}
// Enable table.
BPMPFW_DTB_EMC_TBL_ENABLE(tbl_idx);
BPMPFW_B01_DTB_EMC_TBL_ENABLE(tbl_idx);
UPRINTF("RAM Frequency set to: %d KHz. Voltage: %d mV\n", ram_oc_freq, ram_oc_volt);
}
// Save BPMP-FW entrypoint for TZ.
PMC(APBDEV_PMC_SCRATCH39) = BPMPFW_ENTRYPOINT;
PMC(APBDEV_PMC_SCRATCH39) = BPMPFW_B01_ENTRYPOINT;
PMC(APBDEV_PMC_SCRATCH_WRITE_DISABLE1) |= BIT(15);
}
@ -1191,7 +1191,7 @@ void launch_l4t(const ini_sec_t *ini_sec, int entry_idx, int is_list, bool t210b
// Set BPMP-FW parameters.
if (t210b01)
_l4t_bpmpfw_config(&ctxt);
_l4t_bpmpfw_b01_config(&ctxt);
// Set carveouts and save them to PMC for SC7 Exit.
_l4t_mc_config_carveout(t210b01);
@ -1213,8 +1213,8 @@ void launch_l4t(const ini_sec_t *ini_sec, int entry_idx, int is_list, bool t210b
if (t210b01)
{
// Prep reset vector for SC7 save state and start BPMP-FW.
EXCP_VEC(EVP_COP_RESET_VECTOR) = BPMPFW_ENTRYPOINT;
void (*bpmp_fw_ptr)() = (void *)BPMPFW_ENTRYPOINT;
EXCP_VEC(EVP_COP_RESET_VECTOR) = BPMPFW_B01_ENTRYPOINT;
void (*bpmp_fw_ptr)() = (void *)BPMPFW_B01_ENTRYPOINT;
(*bpmp_fw_ptr)();
}