Small fixes and whitespace

Additionally make info functions smaller and show available fuses.

bootloader/frontend/fe_info.c

@@ -54,6 +54,9 @@ extern void emmcsn_path_impl(char *path, char *sub_dir, char *filename, sdmmc_st
 #define WPRINTF(text) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFFDD00, 0xFFCCCCCC)
 #define WPRINTFARGS(text, args...) gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFFDD00, args, 0xFFCCCCCC)
 
+#pragma GCC push_options
+#pragma GCC optimize ("Os")
+
 void print_fuseinfo()
 {
 	gfx_clear_partial_grey(&gfx_ctxt, 0x1B, 0, 1256);
@@ -77,7 +80,7 @@ void print_fuseinfo()
 		break;
 	}
 	gfx_printf(&gfx_con, "Sdram ID:    %d\n", (fuse_read_odm(4) >> 3) & 0x1F);
-	gfx_printf(&gfx_con, "Burnt fuses: %d\n", burntFuses);
+	gfx_printf(&gfx_con, "Burnt fuses: %d / 64\n", burntFuses);
 	gfx_printf(&gfx_con, "Secure key:  %08X%08X%08X%08X\n\n\n",
 		byte_swap_32(FUSE(FUSE_PRIVATE_KEY0)), byte_swap_32(FUSE(FUSE_PRIVATE_KEY1)),
 		byte_swap_32(FUSE(FUSE_PRIVATE_KEY2)), byte_swap_32(FUSE(FUSE_PRIVATE_KEY3)));
@@ -704,3 +707,6 @@ void bootrom_ipatches_info()
 		btn_wait();
 	}
 }
+
+#pragma GCC pop_options
+

bootloader/frontend/fe_tools.c

@@ -553,8 +553,10 @@ void fix_battery_desync()
 }*/
 
 /*
-//#include "../modules/hekate_libsys_minerva/mtc.h"
+#include "../modules/hekate_libsys_minerva/mtc.h"
-//mtc_config_t mtc_cfg;
+#include "../ianos/ianos.h"
+#include "../soc/fuse.h"
+mtc_config_t mtc_cfg;
 
 void minerva()
 {
@@ -582,6 +584,9 @@ void minerva()
 			break;
 	}
 
+	// Change DRAM voltage.
+	//i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD1, 42); //40 = (1000 * 1100 - 600000) / 12500 -> 1.1V
+
 	mtc_cfg.rate_from = mtc_cfg.mtc_table[curr_ram_idx].rate_khz;
 	mtc_cfg.rate_to = 800000;
 	mtc_cfg.train_mode = OP_TRAIN_SWITCH;

bootloader/frontend/fe_tools.h

@@ -23,5 +23,6 @@ void fix_sd_all_attr();
 void fix_sd_nin_attr();
 void fix_battery_desync();
 void menu_autorcm();
+//void minerva();
 
 #endif

bootloader/gfx/di.h

@@ -238,6 +238,10 @@
 #define DC_WINBUF_ADDR_H_OFFSET 0x806
 #define DC_WINBUF_ADDR_V_OFFSET 0x808
 #define DC_WINBUF_SURFACE_KIND 0x80B
+#define  PITCH	(0 << 0)
+#define  TILED	(1 << 0)
+#define  BLOCK	(2 << 0)
+#define  BLOCK_HEIGHT(x) (((x) & 0x7) << 4)
 
 /*! Display serial interface registers. */
 #define _DSIREG(reg) ((reg) * 4)

bootloader/gfx/tui.c

@@ -15,13 +15,12 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include "di.h"
 #include "tui.h"
 #include "../utils/btn.h"
 #include "../config/config.h"
 #include "../power/max17050.h"
 #include "../utils/util.h"
-#include "../config/config.h"
-#include "di.h"
 
 #ifdef MENU_LOGO_ENABLE
 extern u8 *Kc_MENU_LOGO;

bootloader/hos/hos.c

@@ -503,7 +503,9 @@ int hos_launch(ini_sec_t *cfg)
 	{
 		gfx_printf(&gfx_con, "%kREQUESTED PATCH '%s' NOT APPLIED!%k\n", 0xFFFF0000, unappliedPatch, 0xFFCCCCCC);
 		sd_unmount(); // Just exiting is not enough until pkg2_patch_kips stops modifying the string passed into it.
-		while(1) {} // MUST stop here, because if user requests 'nogc' but it's not applied, their GC controller gets updated!
+
+		_free_launch_components(&ctxt);
+		return 0; // MUST stop here, because if user requests 'nogc' but it's not applied, their GC controller gets updated!
 	}
 
 	// Rebuild and encrypt package2.

bootloader/ianos/ianos.c

@@ -84,7 +84,7 @@ void ianos_print_error(int errorno)
 		gfx_printf(&gfx_con, "Error loading ELF!\n");
 		break;
 	case 5:
-		gfx_printf(&gfx_con, "Error relcating ELF!\n");
+		gfx_printf(&gfx_con, "Error relocating ELF!\n");
 		break;
 	}
 }

bootloader/mem/sdram.c

@@ -509,7 +509,7 @@ sdram_params_t *sdram_get_params()
  * If the boot_rom_patch_control's MSB is set, it uses it as an index to
  * APB_MISC_BASE (u32 array) and sets it to the value of boot_rom_patch_data.
  * (The MSB falls out when it gets multiplied by sizeof(u32)).
- * Because the bootrom does not do any the boundary checks, it lets us write anywhere and anything.
+ * Because the bootrom does not do any boundary checks, it lets us write anywhere and anything.
  * Ipatch hardware let us apply 12 changes to the bootrom and can be changed any time.
  * The first patch is not needed any more when the exploit is triggered, so we overwrite that.
  * 0x10459E is the address where it returns an error when the signature is not valid.