diff --git a/bdk/thermal/fan.c b/bdk/thermal/fan.c
index 9e7a65e..019fd60 100644
--- a/bdk/thermal/fan.c
+++ b/bdk/thermal/fan.c
@@ -18,8 +18,11 @@
 
 #include <thermal/fan.h>
 #include <power/regulator_5v.h>
+#include <soc/bpmp.h>
+#include <soc/clock.h>
 #include <soc/fuse.h>
 #include <soc/gpio.h>
+#include <soc/hw_init.h>
 #include <soc/pinmux.h>
 #include <soc/t210.h>
 #include <utils/util.h>
@@ -37,19 +40,26 @@ void set_fan_duty(u32 duty)
 
 	curr_duty = duty;
 
-	//! TODO: Add HOAG/AULA support.
-	u32 hw_type = fuse_read_hw_type();
-	if (hw_type != FUSE_NX_HW_TYPE_ICOSA &&
-		hw_type != FUSE_NX_HW_TYPE_IOWA)
-		return;
-
 	if (!fan_init)
 	{
 		// Fan tachometer.
-		PINMUX_AUX(PINMUX_AUX_CAM1_PWDN) = PINMUX_TRISTATE | PINMUX_INPUT_ENABLE | PINMUX_PULL_UP | 1;
+		u32 pull_resistor = hw_get_chip_id() == GP_HIDREV_MAJOR_T210 ? PINMUX_PULL_UP : 0;
+		PINMUX_AUX(PINMUX_AUX_CAM1_PWDN) = PINMUX_TRISTATE | PINMUX_INPUT_ENABLE | pull_resistor | 1;
 		gpio_config(GPIO_PORT_S, GPIO_PIN_7, GPIO_MODE_GPIO);
 		gpio_output_enable(GPIO_PORT_S, GPIO_PIN_7, GPIO_OUTPUT_DISABLE);
 
+		// Enable PWM if disabled.
+		if (fuse_read_hw_type() == FUSE_NX_HW_TYPE_AULA)
+		{
+			// Ease the stress to APB.
+			bpmp_freq_t prev_fid = bpmp_clk_rate_set(BPMP_CLK_NORMAL);
+
+			clock_enable_pwm();
+
+			// Restore OC.
+			bpmp_clk_rate_set(prev_fid);
+		}
+
 		PWM(PWM_CONTROLLER_PWM_CSR_1) = PWM_CSR_EN | (0x100 << 16); // Max PWM to disable fan.
 
 		PINMUX_AUX(PINMUX_AUX_LCD_GPIO2) = 1; // Set source to PWM1.