Bugfixes + Unfattening + Remove white on boot

This commit is contained in:
Kostas Missos 2018-07-22 15:18:30 +03:00
parent bc67798f43
commit 39653f7678
10 changed files with 79 additions and 77 deletions

View file

@ -80,6 +80,8 @@
#define DC_COM_PIN_OUTPUT_ENABLE(x) (0x302 + (x))
#define DC_COM_PIN_OUTPUT_POLARITY(x) (0x306 + (x))
#define DC_COM_DSC_TOP_CTL 0x33E
#define DC_DISP_DISP_WIN_OPTIONS 0x402
#define HDMI_ENABLE (1 << 30)
#define DSI_ENABLE (1 << 29)

View file

@ -27,7 +27,7 @@
#include "gfx.h"
extern gfx_ctxt_t gfx_ctxt;
extern gfx_con_t gfx_con;
#define EFSPRINTF(text, ...) print_error(); gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFFFF00, 0xFFFFFFFF);\
#define EFSPRINTF(text, ...) print_error(); gfx_printf(&gfx_con, "%k"text"%k\n", 0xFFFFFF00, 0xFFFFFFFF);
//#define EFSPRINTF(...)
/*--------------------------------------------------------------------------
@ -3248,7 +3248,7 @@ static FRESULT find_volume ( /* FR_OK(0): successful, !=0: an error occurred */
stat = disk_status(fs->pdrv);
if (!(stat & STA_NOINIT)) { /* and the physical drive is kept initialized */
if (!FF_FS_READONLY && mode && (stat & STA_PROTECT)) { /* Check write protection if needed */
EFSPRINTF("Write protected!");
EFSPRINTF("WPEN1");
return FR_WRITE_PROTECTED;
}
return FR_OK; /* The filesystem object is valid */
@ -3262,11 +3262,11 @@ static FRESULT find_volume ( /* FR_OK(0): successful, !=0: an error occurred */
fs->pdrv = LD2PD(vol); /* Bind the logical drive and a physical drive */
stat = disk_initialize(fs->pdrv); /* Initialize the physical drive */
if (stat & STA_NOINIT) { /* Check if the initialization succeeded */
EFSPRINTF("Medium not ready or hard error!");
EFSPRINTF("MDNR");
return FR_NOT_READY; /* Failed to initialize due to no medium or hard error */
}
if (!FF_FS_READONLY && mode && (stat & STA_PROTECT)) { /* Check disk write protection if needed */
EFSPRINTF("Write protected!");
EFSPRINTF("WPEN2");
return FR_WRITE_PROTECTED;
}
#if FF_MAX_SS != FF_MIN_SS /* Get sector size (multiple sector size cfg only) */
@ -3290,11 +3290,11 @@ static FRESULT find_volume ( /* FR_OK(0): successful, !=0: an error occurred */
} while (LD2PT(vol) == 0 && fmt >= 2 && ++i < 4);
}
if (fmt == 4) {
EFSPRINTF("Could not load boot record!");
EFSPRINTF("BRNL");
return FR_DISK_ERR; /* An error occured in the disk I/O layer */
}
if (fmt >= 2) {
EFSPRINTF("No FAT/FAT32/exFAT found!");
EFSPRINTF("NOFAT");
return FR_NO_FILESYSTEM; /* No FAT volume is found */
}
@ -3312,7 +3312,7 @@ static FRESULT find_volume ( /* FR_OK(0): successful, !=0: an error occurred */
return FR_NO_FILESYSTEM; /* Check exFAT version (must be version 1.0) */
if (1 << fs->win[BPB_BytsPerSecEx] != SS(fs)) { /* (BPB_BytsPerSecEx must be equal to the physical sector size) */
EFSPRINTF("exFAT - Sector size does not match physical sector size!");
EFSPRINTF("EX_SPS");
return FR_NO_FILESYSTEM;
}
@ -3324,13 +3324,12 @@ static FRESULT find_volume ( /* FR_OK(0): successful, !=0: an error occurred */
fs->n_fats = fs->win[BPB_NumFATsEx]; /* Number of FATs */
if (fs->n_fats != 1) {
EFSPRINTF("exFAT - Multiple or no file allocation tables found!");
EFSPRINTF("EX_FNF");
return FR_NO_FILESYSTEM; /* (Supports only 1 FAT) */
}
fs->csize = 1 << fs->win[BPB_SecPerClusEx]; /* Cluster size */
if (fs->csize == 0) {
EFSPRINTF("exFAT - Sectors per clusters!");
return FR_NO_FILESYSTEM; /* (Must be 1..32768) */
}
@ -3349,14 +3348,14 @@ static FRESULT find_volume ( /* FR_OK(0): successful, !=0: an error occurred */
/* Check if bitmap location is in assumption (at the first cluster) */
if (move_window(fs, clst2sect(fs, fs->dirbase)) != FR_OK) {
EFSPRINTF("exFAT - Bitmap location not at 1st cluster!");
EFSPRINTF("EX_BM1C");
return FR_DISK_ERR;
}
for (i = 0; i < SS(fs); i += SZDIRE) {
if (fs->win[i] == 0x81 && ld_dword(fs->win + i + 20) == 2) break; /* 81 entry with cluster #2? */
}
if (i == SS(fs)) {
EFSPRINTF("exFAT - Bitmap allocation is missing!");
EFSPRINTF("EX_BMM");
return FR_NO_FILESYSTEM;
}
#if !FF_FS_READONLY
@ -3367,7 +3366,7 @@ static FRESULT find_volume ( /* FR_OK(0): successful, !=0: an error occurred */
#endif /* FF_FS_EXFAT */
{
if (ld_word(fs->win + BPB_BytsPerSec) != SS(fs)) {
EFSPRINTF("FAT - Sector size does not match physical sector size!");
EFSPRINTF("32_SPS");
return FR_NO_FILESYSTEM; /* (BPB_BytsPerSec must be equal to the physical sector size) */
}
@ -3540,7 +3539,7 @@ FRESULT f_mount (
/* Get logical drive number */
vol = get_ldnumber(&rp);
if (vol < 0) {
EFSPRINTF("Invalid drive!");
EFSPRINTF("IDRIVE!");
return FR_INVALID_DRIVE;
}
cfs = FatFs[vol]; /* Pointer to fs object */
@ -3784,11 +3783,11 @@ FRESULT f_read (
*br = 0; /* Clear read byte counter */
res = validate(&fp->obj, &fs); /* Check validity of the file object */
if (res != FR_OK || (res = (FRESULT)fp->err) != FR_OK) {
EFSPRINTF("File object Validation!");
EFSPRINTF("FOV");
LEAVE_FF(fs, res); /* Check validity */
}
if (!(fp->flag & FA_READ)) {
EFSPRINTF("Access denied!");
EFSPRINTF("NOACCESS");
LEAVE_FF(fs, FR_DENIED); /* Check access mode */
}
remain = fp->obj.objsize - fp->fptr;
@ -3812,18 +3811,17 @@ FRESULT f_read (
}
}
if (clst < 2) {
EFSPRINTF("Cluster status check or Internal error!");
EFSPRINTF("CCHK");
ABORT(fs, FR_INT_ERR);
}
if (clst == 0xFFFFFFFF) {
EFSPRINTF("Disk error (cluster hard error)!");
EFSPRINTF("DSKC");
ABORT(fs, FR_DISK_ERR);
}
fp->clust = clst; /* Update current cluster */
}
sect = clst2sect(fs, fp->clust); /* Get current sector */
if (sect == 0) {
EFSPRINTF("Get current sector error!");
ABORT(fs, FR_INT_ERR);
}
sect += csect;
@ -3833,7 +3831,7 @@ FRESULT f_read (
cc = fs->csize - csect;
}
if (disk_read(fs->pdrv, rbuff, sect, cc) != RES_OK) {
EFSPRINTF("Read - Low level disk I/O!");
EFSPRINTF("RLIO");
ABORT(fs, FR_DISK_ERR);
}
#if !FF_FS_READONLY && FF_FS_MINIMIZE <= 2 /* Replace one of the read sectors with cached data if it contains a dirty sector */
@ -3855,14 +3853,14 @@ FRESULT f_read (
#if !FF_FS_READONLY
if (fp->flag & FA_DIRTY) { /* Write-back dirty sector cache */
if (disk_write(fs->pdrv, fp->buf, fp->sect, 1) != RES_OK) {
EFSPRINTF("Write-back dirty sector cache!");
EFSPRINTF("RDC");
ABORT(fs, FR_DISK_ERR);
}
fp->flag &= (BYTE)~FA_DIRTY;
}
#endif
if (disk_read(fs->pdrv, fp->buf, sect, 1) != RES_OK) {
EFSPRINTF("Read - Fill sector cache");
EFSPRINTF("RSC");
ABORT(fs, FR_DISK_ERR); /* Fill sector cache */
}
}
@ -3907,11 +3905,11 @@ FRESULT f_write (
*bw = 0; /* Clear write byte counter */
res = validate(&fp->obj, &fs); /* Check validity of the file object */
if (res != FR_OK || (res = (FRESULT)fp->err) != FR_OK) {
EFSPRINTF("File object Validation!");
EFSPRINTF("FOV");
LEAVE_FF(fs, res); /* Check validity */
}
if (!(fp->flag & FA_WRITE)) {
EFSPRINTF("Access denied!");
EFSPRINTF("NOACCESS");
LEAVE_FF(fs, FR_DENIED); /* Check access mode */
}
@ -3941,15 +3939,15 @@ FRESULT f_write (
}
}
if (clst == 0) {
EFSPRINTF("Could not allocate a new cluster\n(disk full or low level disk I/O error)!");
EFSPRINTF("DSKFULL");
break; /* Could not allocate a new cluster (disk full) */
}
if (clst == 1) {
EFSPRINTF("Cluster status check or Internal error!");
EFSPRINTF("CCHK");
ABORT(fs, FR_INT_ERR);
}
if (clst == 0xFFFFFFFF) {
EFSPRINTF("Disk error (cluster hard error)!");
EFSPRINTF("DERR");
ABORT(fs, FR_DISK_ERR);
}
fp->clust = clst; /* Update current cluster */
@ -3966,7 +3964,6 @@ FRESULT f_write (
#endif
sect = clst2sect(fs, fp->clust); /* Get current sector */
if (sect == 0) {
EFSPRINTF("Get current sector error!");
ABORT(fs, FR_INT_ERR);
}
sect += csect;
@ -3976,7 +3973,7 @@ FRESULT f_write (
cc = fs->csize - csect;
}
if (disk_write(fs->pdrv, wbuff, sect, cc) != RES_OK) {
EFSPRINTF("Write - Low level disk I/O!");
EFSPRINTF("WLIO");
ABORT(fs, FR_DISK_ERR);
}
#if FF_FS_MINIMIZE <= 2

View file

@ -619,6 +619,8 @@ int hos_launch(ini_sec_t *cfg)
*mb_in = bootStateDramPkg2;
*mb_out = 0;
display_backlight(0);
// Wait for secmon to get ready.
cluster_boot_cpu0(ctxt.pkg1_id->secmon_base);
while (!*mb_out)

View file

@ -130,3 +130,4 @@ u8 i2c_recv_byte(u32 idx, u32 x, u32 y)
i2c_recv_buf_small(&tmp, 1, idx, x, y);
return tmp;
}

View file

@ -21,7 +21,6 @@
#include "ff.h"
#include "heap.h"
static char *_strdup(char *str)
{
char *res = malloc(strlen(str) + 1);
@ -157,6 +156,8 @@ void ini_free(link_t *dst)
free(ini_sec->name);
free(ini_sec);
}
dst = NULL;
}
ini_sec_t *ini_clone_section(ini_sec_t *cfg)
@ -190,4 +191,6 @@ void ini_free_section(ini_sec_t *cfg)
free(kv);
}
free(cfg);
cfg = NULL;
}

View file

@ -246,7 +246,7 @@ void mbist_workaround()
I2S(0x388) &= 0xFFFFFFFE;
I2S(0x4A0) |= 0x400;
I2S(0x488) &= 0xFFFFFFFE;
DISPLAY_A(0xCF8) |= 4;
DISPLAY_A(_DIREG(DC_COM_DSC_TOP_CTL)) |= 4;
VIC(0x8C) = 0xFFFFFFFF;
usleep(2);
@ -287,7 +287,7 @@ void config_se_brom()
SE(SE_KEY_TABLE_ACCESS_REG_OFFSET + 15 * 4) = 0x7E;
// Clear the boot reason to avoid problems later
PMC(APBDEV_PMC_SCRATCH200) = 0x0;
PMC(APBDEV_PMC_RST_STATUS_0) = 0x0;
PMC(APBDEV_PMC_RST_STATUS) = 0x0;
}
void config_hw()
@ -295,8 +295,8 @@ void config_hw()
// Bootrom stuff we skipped by going through rcm.
config_se_brom();
//FUSE(FUSE_PRIVATEKEYDISABLE) = 0x11;
SYSREG(0x110) &= 0xFFFFFF9F;
PMC(0x244) = ((PMC(0x244) >> 1) << 1) & 0xFFFFFFFD;
SYSREG(AHB_AHB_SPARE_REG) &= 0xFFFFFF9F;
PMC(APBDEV_PMC_SCRATCH49) = ((PMC(APBDEV_PMC_SCRATCH49) >> 1) << 1) & 0xFFFFFFFD;
mbist_workaround();
clock_enable_se();
@ -309,7 +309,7 @@ void config_hw()
mc_enable();
config_oscillators();
APB_MISC(0x40) = 0;
APB_MISC(APB_MISC_PP_PINMUX_GLOBAL) = 0;
config_gpios();
//clock_enable_uart(UART_C);
@ -349,7 +349,7 @@ void config_hw()
mc_config_carveout();
sdram_init();
//TODO: test this with LP0 wakeup.
sdram_lp0_save_params(sdram_get_params());
}
@ -776,7 +776,7 @@ int dump_emmc_verify(sdmmc_storage_t *storage, u32 lba_curr, char* outFilename,
f_close(&fp);
return 1;
}
if (f_read(&fp, bufSd, num << 9, NULL) != FR_OK)
if (f_read(&fp, bufSd, num << 9, NULL))
{
gfx_con.fntsz = 16;
EPRINTFARGS("\nFailed to read %d blocks (@LBA %08X),\nfrom sd card!\n\nVerification failed..\n", num, lba_curr);
@ -1399,8 +1399,11 @@ static void restore_emmc_selected(emmcPartType_t restoreType)
gfx_printf(&gfx_con, "Are you really sure?\n\n%k", 0xFFCCCCCC);
if ((restoreType & PART_BOOT) || (restoreType & PART_GP_ALL))
{
gfx_puts(&gfx_con, "The mode you selected will only restore\nthe partitions that it can find.\n");
gfx_puts(&gfx_con, "If the appropriate named file is not found,\nit will skip it and continue with the next.\n\n");
gfx_puts(&gfx_con, "The mode you selected will only restore\nthe ");
if (restoreType & PART_BOOT)
gfx_puts(&gfx_con, "boot ");
gfx_puts(&gfx_con, "partitions that it can find.\n");
gfx_puts(&gfx_con, "If it is not found, it will be skipped\nand continue with the next.\n\n");
}
gfx_con_getpos(&gfx_con, &gfx_con.savedx, &gfx_con.savedy);
@ -1628,6 +1631,7 @@ void dump_packages12()
gfx_printf(&gfx_con, "\n%kKernel CRC32C: %k0x%08X\n\n",0xFFC7EA46, 0xFFCCCCCC, kernel_crc32);
gfx_printf(&gfx_con, "%kKernel size: %k0x%05X\n\n", 0xFFC7EA46, 0xFFCCCCCC, pkg2_hdr->sec_size[PKG2_SEC_KERNEL]);
gfx_printf(&gfx_con, "%kINI1 size: %k0x%05X\n\n", 0xFFC7EA46, 0xFFCCCCCC, pkg2_hdr->sec_size[PKG2_SEC_INI1]);
// Dump pkg2.1.
if (sd_save_to_file(pkg2, pkg2_hdr->sec_size[PKG2_SEC_KERNEL] + pkg2_hdr->sec_size[PKG2_SEC_INI1],
"Backup/pkg2/pkg2_decr.bin"))
@ -1707,6 +1711,7 @@ void launch_firmware()
{
free(ments);
ini_free(&ini_sections);
sd_unmount();
return;
}
}
@ -1756,7 +1761,6 @@ void auto_launch_firmware()
};
struct _bmp_data bmpData;
int ini_freed = 1;
int backlightEnabled = 0;
int bootlogoFound = 0;
char *bootlogoCustomEntry = NULL;
@ -1770,7 +1774,6 @@ void auto_launch_firmware()
{
if (ini_parse(&ini_sections, "hekate_ipl.ini"))
{
ini_freed = 0;
u32 configEntry = 0;
u32 boot_entry_id = 0;
@ -1904,7 +1907,6 @@ void auto_launch_firmware()
goto out;
ini_free(&ini_sections);
ini_freed = 1;
#ifdef MENU_LOGO_ENABLE
free(Kc_MENU_LOGO);
@ -1920,7 +1922,6 @@ void auto_launch_firmware()
out:;
gfx_clear_grey(&gfx_ctxt, 0x1B);
if (!ini_freed)
ini_free(&ini_sections);
ini_free_section(cfg_sec);
@ -2079,14 +2080,17 @@ void print_fuel_gauge_info()
max17050_get_property(MAX17050_Age, &value);
gfx_printf(&gfx_con, "Age: %3d%\n", value);
max17050_get_property(MAX17050_Cycles, &value);
gfx_printf(&gfx_con, "Charge cycle count: %3d%\n", value);
max17050_get_property(MAX17050_RepSOC, &value);
gfx_printf(&gfx_con, "Capacity now: %3d%\n", value >> 8);
max17050_get_property(MAX17050_TEMP, &value);
if (value >= 0)
gfx_printf(&gfx_con, "Battery temperature: %d.%d oC\n", value / 10, value % 10);
else
gfx_printf(&gfx_con, "Battery temperature: -%d.%d oC\n", ~value / 10, (~value) % 10);
max17050_get_property(MAX17050_RepCap, &value);
gfx_printf(&gfx_con, "Capacity now: %4d mAh\n", value);
max17050_get_property(MAX17050_FullCAP, &value);
gfx_printf(&gfx_con, "Capacity full: %4d mAh\n", value);
max17050_get_property(MAX17050_DesignCap, &value);
gfx_printf(&gfx_con, "Capacity (design): %4d mAh\n", value);
max17050_get_property(MAX17050_Current, &value);
if (value >= 0)
@ -2100,6 +2104,12 @@ void print_fuel_gauge_info()
else
gfx_printf(&gfx_con, "Current average: -%d mA\n", ~value / 1000);
max17050_get_property(MAX17050_VCELL, &value);
gfx_printf(&gfx_con, "Voltage now: %4d mV\n", value);
max17050_get_property(MAX17050_OCVInternal, &value);
gfx_printf(&gfx_con, "Voltage open-circuit: %4d mV\n", value);
max17050_get_property(MAX17050_MinVolt, &value);
gfx_printf(&gfx_con, "Min voltage reached: %4d mV\n", value);
@ -2109,23 +2119,11 @@ void print_fuel_gauge_info()
max17050_get_property(MAX17050_V_empty, &value);
gfx_printf(&gfx_con, "Empty voltage (design): %4d mV\n", value);
max17050_get_property(MAX17050_VCELL, &value);
gfx_printf(&gfx_con, "Voltage now: %4d mV\n", value);
max17050_get_property(MAX17050_OCVInternal, &value);
gfx_printf(&gfx_con, "Voltage open-circuit: %4d mV\n", value);
max17050_get_property(MAX17050_RepSOC, &value);
gfx_printf(&gfx_con, "Capacity now: %3d%\n", value >> 8);
max17050_get_property(MAX17050_RepCap, &value);
gfx_printf(&gfx_con, "Capacity now: %4d mAh\n", value);
max17050_get_property(MAX17050_FullCAP, &value);
gfx_printf(&gfx_con, "Capacity full: %4d mAh\n", value);
max17050_get_property(MAX17050_DesignCap, &value);
gfx_printf(&gfx_con, "Capacity (design): %4d mAh\n", value);
max17050_get_property(MAX17050_TEMP, &value);
if (value >= 0)
gfx_printf(&gfx_con, "Battery temperature: %d.%d oC\n", value / 10, value % 10);
else
gfx_printf(&gfx_con, "Battery temperature: -%d.%d oC\n", ~value / 10, (~value) % 10);
}
void print_battery_charger_info()

View file

@ -19,11 +19,6 @@
#include "i2c.h"
#include "util.h"
#include "gfx.h"
extern gfx_ctxt_t gfx_ctxt;
extern gfx_con_t gfx_con;
#define DPRINTF(...) gfx_printf(&gfx_con, __VA_ARGS__)
#define REGULATOR_SD 0
#define REGULATOR_LDO 1

View file

@ -29,22 +29,22 @@
#define APBDEV_PMC_DDR_PWR 0xE8
#define APBDEV_PMC_CRYPTO_OP 0xF4
#define APBDEV_PMC_OSC_EDPD_OVER 0x1A4
#define APBDEV_PMC_RST_STATUS 0x1B4
#define APBDEV_PMC_IO_DPD_REQ 0x1B8
#define APBDEV_PMC_IO_DPD2_REQ 0x1C0
#define APBDEV_PMC_VDDP_SEL 0x1CC
#define APBDEV_PMC_SCRATCH49 0x244
#define APBDEV_PMC_TSC_MULT 0x2B4
#define APBDEV_PMC_REG_SHORT 0x2CC
#define APBDEV_PMC_WEAK_BIAS 0x2C8
#define APBDEV_PMC_SECURE_SCRATCH21 0x334
#define APBDEV_PMC_SECURE_SCRATCH32 0x360
#define APBDEV_PMC_SECURE_SCRATCH49 0x3A4
#define APBDEV_PMC_CNTRL2 0x440
#define APBDEV_PMC_IO_DPD4_REQ 0x464
#define APBDEV_PMC_DDR_CNTRL 0x4E4
#define APBDEV_PMC_SCRATCH188 0x810
#define APBDEV_PMC_SCRATCH190 0x818
#define APBDEV_PMC_SCRATCH200 0x840
#define APBDEV_PMC_RST_STATUS_0 0x1B4
#define APBDEV_PMC_SECURE_SCRATCH49_0 0x3A4
#define APBDEV_PMC_SCRATCH49_0 0x244
#endif

View file

@ -90,8 +90,12 @@
#define MIPI_CAL(off) _REG(MIPI_CAL_BASE, off)
#define I2S(off) _REG(I2S_BASE, off)
/*! Misc registers. */
#define APB_MISC_PP_PINMUX_GLOBAL 0x40
/*! System registers. */
#define AHB_ARBITRATION_XBAR_CTRL 0xE0
#define AHB_AHB_SPARE_REG 0x110
/*! Secure boot registers. */
#define SB_CSR 0x0

View file

@ -59,10 +59,10 @@ void tui_sbar(gfx_con_t *con, int force_update)
if (battVoltCurr >= 0)
gfx_printf(con, " %k+%d mA %k%K\n",
0xFF008000, battVoltCurr / 1000, 0xFFCCCCCC, 0xFF1B1B1B);
0xFF008800, battVoltCurr / 1000, 0xFFCCCCCC, 0xFF1B1B1B);
else
gfx_printf(con, " %k-%d mA %k%K\n",
0xFF800000, (~battVoltCurr) / 1000, 0xFFCCCCCC, 0xFF1B1B1B);
0xFF880000, (~battVoltCurr) / 1000, 0xFFCCCCCC, 0xFF1B1B1B);
con->fntsz = prevFontSize;
gfx_con_setpos(con, con->savedx, con->savedy);
}