nold/hekate
1
0
Fork 0
mirror of https://github.com/CTCaer/hekate synced 2024-12-22 19:31:12 +00:00
Code Issues Projects Releases Packages Wiki Activity

ums: add warn reporting to log status

Browse source 
Some OSes do not adhere to limits reported by UMS gadget to them.
In such cases, make sure that user is notified about their host skipping the checks and sending "illegal" commands.
This commit is contained in:
CTCaer 2021-08-28 17:08:15 +03:00
parent 1afb1a50c3
commit 134f3dac52
1 changed files with 31 additions and 25 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

56
bdk/usb/usb_gadget_ums.c
View file

@ -460,6 +460,7 @@ static int _scsi_read(usbd_gadget_ums_t *ums, bulk_ctxt_t *bulk_ctxt)
}
if (lba_offset >= ums->lun.num_sectors)
{
ums->set_text(ums->label, "#FF8000 Warn:# Read - Out of range! Host notified.");
ums->lun.sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
return UMS_RES_INVALID_ARG;
@ -548,6 +549,7 @@ static int _scsi_write(usbd_gadget_ums_t *ums, bulk_ctxt_t *bulk_ctxt)
if (ums->lun.ro)
{
ums->set_text(ums->label, "#FF8000 Warn:# Write - Read only! Host notified.");
ums->lun.sense_data = SS_WRITE_PROTECTED;
return UMS_RES_INVALID_ARG;
@ -571,19 +573,20 @@ static int _scsi_write(usbd_gadget_ums_t *ums, bulk_ctxt_t *bulk_ctxt)
// Check that starting LBA is not past the end sector offset.
if (lba_offset >= ums->lun.num_sectors)
{
ums->set_text(ums->label, "#FF8000 Warn:# Write - Out of range! Host notified.");
ums->lun.sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
return UMS_RES_INVALID_ARG;
}
/* Carry out the file writes */
// Carry out the file writes.
usb_lba_offset = lba_offset;
amount_left_to_req = ums->data_size_from_cmnd;
amount_left_to_write = ums->data_size_from_cmnd;
while (amount_left_to_write > 0)
{
/* Queue a request for more data from the host */
// Queue a request for more data from the host.
if (amount_left_to_req > 0)
{
@ -638,12 +641,12 @@ static int _scsi_write(usbd_gadget_ums_t *ums, bulk_ctxt_t *bulk_ctxt)
*/
amount = MIN(amount, bulk_ctxt->bulk_out_length);
/* Don't write a partial block */
// Don't write a partial block.
amount -= (amount & 511);
if (amount == 0)
goto empty_write;
/* Perform the write */
// Perform the write.
if (!sdmmc_storage_write(ums->lun.storage, ums->lun.offset + lba_offset,
amount >> UMS_DISK_LBA_SHIFT, (u8 *)bulk_ctxt->bulk_out_buf))
amount = 0;
@ -654,7 +657,7 @@ DPRINTF("file write %X @ %X\n", amount, lba_offset);
amount_left_to_write -= amount;
ums->residue -= amount;
/* If an error occurred, report it and its position */
// If an error occurred, report it and its position.
if (!amount)
{
ums->set_text(ums->label, "#FFDD00 Error:# SDMMC Write!");
@ -684,6 +687,7 @@ static int _scsi_verify(usbd_gadget_ums_t *ums, bulk_ctxt_t *bulk_ctxt)
u32 lba_offset = get_array_be_to_le32(&ums->cmnd[2]);
if (lba_offset >= ums->lun.num_sectors)
{
ums->set_text(ums->label, "#FF8000 Warn:# Verif - Out of range! Host notified.");
ums->lun.sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
return UMS_RES_INVALID_ARG;
@ -1005,7 +1009,7 @@ static int _scsi_mode_sense(usbd_gadget_ums_t *ums, bulk_ctxt_t *bulk_ctxt)
return UMS_RES_INVALID_ARG;
}
/* Store the mode data length */
// Store the mode data length.
if (ums->cmnd[0] == SC_MODE_SENSE_6)
buf0[0] = len - 1;
else
@ -1538,12 +1542,12 @@ static int finish_reply(usbd_gadget_ums_t *ums, bulk_ctxt_t *bulk_ctxt)
static int received_cbw(usbd_gadget_ums_t *ums, bulk_ctxt_t *bulk_ctxt)
{
/* Was this a real packet? Should it be ignored? */
// Was this a real packet? Should it be ignored?
if (bulk_ctxt->bulk_out_status || bulk_ctxt->bulk_out_ignore || ums->lun.unmounted)
{
if (bulk_ctxt->bulk_out_status || ums->lun.unmounted)
{
DPRINTF("USB: EP timeout\n");
DPRINTF("USB: EP timeout (%d)\n", bulk_ctxt->bulk_out_status);
// In case we disconnected, exit UMS.
// Raise timeout if removable and didn't got a unit ready command inside 4s.
if (bulk_ctxt->bulk_out_status == USB2_ERROR_XFER_EP_DISABLED ||
@ -1584,27 +1588,29 @@ static int received_cbw(usbd_gadget_ums_t *ums, bulk_ctxt_t *bulk_ctxt)
return UMS_RES_INVALID_ARG;
}
/* Is the CBW valid? */
// Is the CBW valid?
bulk_recv_pkt_t *cbw = (bulk_recv_pkt_t *)bulk_ctxt->bulk_out_buf;
if (bulk_ctxt->bulk_out_length_actual != USB_BULK_CB_WRAP_LEN || cbw->Signature != USB_BULK_CB_SIG)
{
gfx_printf("USB: invalid CBW: len %X sig 0x%X\n", bulk_ctxt->bulk_out_length_actual, cbw->Signature);
// The Bulk-only spec says we MUST stall the IN endpoint
// (6.6.1), so it's unavoidable. It also says we must
// retain this state until the next reset, but there's
// no way to tell the controller driver it should ignore
// Clear-Feature(HALT) requests.
//
// We aren't required to halt the OUT endpoint; instead
// we can simply accept and discard any data received
// until the next reset.
/*
* The Bulk-only spec says we MUST stall the IN endpoint
* (6.6.1), so it's unavoidable. It also says we must
* retain this state until the next reset, but there's
* no way to tell the controller driver it should ignore
* Clear-Feature(HALT) requests.
*
* We aren't required to halt the OUT endpoint; instead
* we can simply accept and discard any data received
* until the next reset.
*/
ums_wedge_bulk_in_endpoint(ums);
bulk_ctxt->bulk_out_ignore = 1;
return UMS_RES_INVALID_ARG;
}
/* Is the CBW meaningful? */
// Is the CBW meaningful?
if (cbw->Lun >= UMS_MAX_LUN || cbw->Flags & ~USB_BULK_IN_FLAG ||
cbw->Length == 0 || cbw->Length > SCSI_MAX_CMD_SZ)
{
@ -1623,7 +1629,7 @@ static int received_cbw(usbd_gadget_ums_t *ums, bulk_ctxt_t *bulk_ctxt)
return UMS_RES_INVALID_ARG;
}
/* Save the command for later */
// Save the command for later.
ums->cmnd_size = cbw->Length;
memcpy(ums->cmnd, cbw->CDB, ums->cmnd_size);
@ -1658,7 +1664,7 @@ static int get_next_command(usbd_gadget_ums_t *ums, bulk_ctxt_t *bulk_ctxt)
bulk_ctxt->bulk_out_length = USB_BULK_CB_WRAP_LEN;
/* Queue a request to read a Bulk-only CBW */
// Queue a request to read a Bulk-only CBW.
_ums_transfer_start(ums, bulk_ctxt, bulk_ctxt->bulk_out, USB_XFER_SYNCED_CMD);
/* We will drain the buffer in software, which means we
@ -1696,7 +1702,7 @@ static void send_status(usbd_gadget_ums_t *ums, bulk_ctxt_t *bulk_ctxt)
SK(sd), ASC(sd), ASCQ(sd), ums->lun.sense_data_info);
}
/* Store and send the Bulk-only CSW */
// Store and send the Bulk-only CSW.
bulk_send_pkt_t *csw = (bulk_send_pkt_t *)bulk_ctxt->bulk_in_buf;
csw->Signature = USB_BULK_CS_SIG;
@ -1712,7 +1718,7 @@ static void handle_exception(usbd_gadget_ums_t *ums, bulk_ctxt_t *bulk_ctxt)
{
enum ums_state old_state;
/* Clear out the controller's fifos */
// Clear out the controller's fifos.
ums_flush_endpoint(bulk_ctxt->bulk_in);
ums_flush_endpoint(bulk_ctxt->bulk_out);
@ -1735,7 +1741,7 @@ static void handle_exception(usbd_gadget_ums_t *ums, bulk_ctxt_t *bulk_ctxt)
ums->state = UMS_STATE_NORMAL;
/* Carry out any extra actions required for the exception */
// Carry out any extra actions required for the exception.
switch (old_state)
{
case UMS_STATE_NORMAL:
@ -1757,7 +1763,7 @@ static void handle_exception(usbd_gadget_ums_t *ums, bulk_ctxt_t *bulk_ctxt)
break;
case UMS_STATE_EXIT:
ums->state = UMS_STATE_TERMINATED; /* Stop the thread */
ums->state = UMS_STATE_TERMINATED; // Stop the thread.
break;
default: