mirror of
https://github.com/Decscots/Lockpick_RCM
synced 2024-11-23 20:59:24 +00:00
1549 lines
65 KiB
C
1549 lines
65 KiB
C
/*
|
|
* Copyright (c) 2018 naehrwert
|
|
* Copyright (c) 2018 balika011
|
|
* Copyright (c) 2019-2020 CTCaer
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <string.h>
|
|
|
|
#include <mem/mc.h>
|
|
#include <mem/emc.h>
|
|
#include <mem/sdram.h>
|
|
#include <mem/sdram_param_t210.h>
|
|
#include <mem/sdram_param_t210b01.h>
|
|
#include <memory_map.h>
|
|
#include <power/max77620.h>
|
|
#include <power/max7762x.h>
|
|
#include <soc/clock.h>
|
|
#include <soc/fuse.h>
|
|
#include <soc/hw_init.h>
|
|
#include <soc/i2c.h>
|
|
#include <soc/pmc.h>
|
|
#include <soc/t210.h>
|
|
#include <utils/util.h>
|
|
|
|
#define CONFIG_SDRAM_KEEP_ALIVE
|
|
|
|
//#define CONFIG_SDRAM_COMPRESS_CFG
|
|
|
|
typedef struct _sdram_vendor_patch_t
|
|
{
|
|
u32 val;
|
|
u32 addr:10;
|
|
u32 dramid:22;
|
|
} sdram_vendor_patch_t;
|
|
|
|
#ifdef CONFIG_SDRAM_COMPRESS_CFG
|
|
#include <libs/compr/lz.h>
|
|
#include "sdram_config_lz.inl"
|
|
#else
|
|
#include "sdram_config.inl"
|
|
#endif
|
|
|
|
#include "sdram_config_t210b01.inl"
|
|
|
|
static u32 _sdram_get_id()
|
|
{
|
|
return ((fuse_read_odm(4) & 0xF8) >> 3);
|
|
}
|
|
|
|
static bool _sdram_wait_emc_status(u32 reg_offset, u32 bit_mask, bool updated_state, s32 emc_channel)
|
|
{
|
|
bool err = true;
|
|
|
|
for (s32 i = 0; i < EMC_STATUS_UPDATE_TIMEOUT; i++)
|
|
{
|
|
if (emc_channel)
|
|
{
|
|
if (emc_channel != 1)
|
|
goto done;
|
|
|
|
if (((EMC_CH1(reg_offset) & bit_mask) != 0) == updated_state)
|
|
{
|
|
err = false;
|
|
break;
|
|
}
|
|
}
|
|
else if (((EMC(reg_offset) & bit_mask) != 0) == updated_state)
|
|
{
|
|
err = false;
|
|
break;
|
|
}
|
|
usleep(1);
|
|
}
|
|
|
|
done:
|
|
return err;
|
|
}
|
|
|
|
static void _sdram_req_mrr_data(u32 data, bool dual_channel)
|
|
{
|
|
EMC(EMC_MRR) = data;
|
|
_sdram_wait_emc_status(EMC_EMC_STATUS, EMC_STATUS_MRR_DIVLD, true, EMC_CHAN0);
|
|
if (dual_channel)
|
|
_sdram_wait_emc_status(EMC_EMC_STATUS, EMC_STATUS_MRR_DIVLD, true, EMC_CHAN1);
|
|
}
|
|
|
|
emc_mr_data_t sdram_read_mrx(emc_mr_t mrx)
|
|
{
|
|
emc_mr_data_t data;
|
|
|
|
/*
|
|
* When a dram chip has only one rank, then the info from the 2 ranks differs.
|
|
* Info not matching is only allowed on different channels.
|
|
*/
|
|
|
|
// Get Device 0 (Rank 0) info from both dram chips (channels).
|
|
_sdram_req_mrr_data(BIT(31) | (mrx << 16), EMC_CHAN0);
|
|
data.rank0_ch0 = EMC(EMC_MRR) & 0xFF;
|
|
data.rank0_ch1 = (EMC(EMC_MRR) & 0xFF00 >> 8);
|
|
|
|
// Get Device 1 (Rank 1) info from both dram chips (channels).
|
|
_sdram_req_mrr_data(BIT(30) | (mrx << 16), EMC_CHAN1);
|
|
data.rank1_ch0 = EMC(EMC_MRR) & 0xFF;
|
|
data.rank1_ch1 = (EMC(EMC_MRR) & 0xFF00 >> 8);
|
|
|
|
return data;
|
|
}
|
|
|
|
static void _sdram_config_t210(const sdram_params_t210_t *params)
|
|
{
|
|
// Program DPD3/DPD4 regs (coldboot path).
|
|
// Enable sel_dpd on unused pins.
|
|
u32 dpd_req = (params->emc_pmc_scratch1 & 0x3FFFFFFF) | 0x80000000;
|
|
PMC(APBDEV_PMC_IO_DPD3_REQ) = (dpd_req ^ 0xFFFF) & 0xC000FFFF;
|
|
usleep(params->pmc_io_dpd3_req_wait);
|
|
|
|
// Disable e_dpd_vttgen.
|
|
dpd_req = (params->emc_pmc_scratch2 & 0x3FFFFFFF) | 0x80000000;
|
|
PMC(APBDEV_PMC_IO_DPD4_REQ) = (dpd_req & 0xFFFF0000) ^ 0x3FFF0000;
|
|
usleep(params->pmc_io_dpd4_req_wait);
|
|
|
|
// Disable e_dpd_bg.
|
|
PMC(APBDEV_PMC_IO_DPD4_REQ) = (dpd_req ^ 0xFFFF) & 0xC000FFFF;
|
|
usleep(params->pmc_io_dpd4_req_wait);
|
|
|
|
PMC(APBDEV_PMC_WEAK_BIAS) = 0;
|
|
usleep(1);
|
|
|
|
// Start clocks.
|
|
CLOCK(CLK_RST_CONTROLLER_PLLM_MISC1) = params->pllm_setup_control;
|
|
CLOCK(CLK_RST_CONTROLLER_PLLM_MISC2) = 0;
|
|
|
|
#ifdef CONFIG_SDRAM_KEEP_ALIVE
|
|
CLOCK(CLK_RST_CONTROLLER_PLLM_BASE) =
|
|
(params->pllm_feedback_divider << 8) | params->pllm_input_divider | ((params->pllm_post_divider & 0xFFFF) << 20) | PLLCX_BASE_ENABLE;
|
|
#else
|
|
u32 pllm_div = (params->pllm_feedback_divider << 8) | params->pllm_input_divider | ((params->pllm_post_divider & 0xFFFF) << 20);
|
|
CLOCK(CLK_RST_CONTROLLER_PLLM_BASE) = pllm_div;
|
|
CLOCK(CLK_RST_CONTROLLER_PLLM_BASE) = pllm_div | PLLCX_BASE_ENABLE;
|
|
#endif
|
|
|
|
u32 wait_end = get_tmr_us() + 300;
|
|
while (!(CLOCK(CLK_RST_CONTROLLER_PLLM_BASE) & 0x8000000))
|
|
{
|
|
if (get_tmr_us() >= wait_end)
|
|
goto break_nosleep;
|
|
}
|
|
usleep(10);
|
|
|
|
break_nosleep:
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_EMC) = ((params->mc_emem_arb_misc0 >> 11) & 0x10000) | (params->emc_clock_source & 0xFFFEFFFF);
|
|
if (params->emc_clock_source_dll)
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_EMC_DLL) = params->emc_clock_source_dll;
|
|
if (params->clear_clock2_mc1)
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_W_CLR) = 0x40000000; // Clear Reset to MC1.
|
|
|
|
// Enable and clear reset for memory clocks.
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_H_SET) = BIT(CLK_H_EMC) | BIT(CLK_H_MEM);
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_ENB_X_SET) = BIT(CLK_X_EMC_DLL);
|
|
CLOCK(CLK_RST_CONTROLLER_RST_DEV_H_CLR) = BIT(CLK_H_EMC) | BIT(CLK_H_MEM);
|
|
|
|
// Set pad macros.
|
|
EMC(EMC_PMACRO_VTTGEN_CTRL_0) = params->emc_pmacro_vttgen_ctrl0;
|
|
EMC(EMC_PMACRO_VTTGEN_CTRL_1) = params->emc_pmacro_vttgen_ctrl1;
|
|
EMC(EMC_PMACRO_VTTGEN_CTRL_2) = params->emc_pmacro_vttgen_ctrl2;
|
|
|
|
EMC(EMC_TIMING_CONTROL) = 1; // Trigger timing update so above writes take place.
|
|
usleep(10); // Ensure the regulators settle.
|
|
|
|
// Select EMC write mux.
|
|
EMC(EMC_DBG) = (params->emc_dbg_write_mux << 1) | params->emc_dbg;
|
|
|
|
// Patch 2 using BCT spare variables.
|
|
if (params->emc_bct_spare2)
|
|
*(vu32 *)params->emc_bct_spare2 = params->emc_bct_spare3;
|
|
|
|
// Program CMD mapping. Required before brick mapping, else
|
|
// we can't guarantee CK will be differential at all times.
|
|
EMC(EMC_FBIO_CFG7) = params->emc_fbio_cfg7;
|
|
EMC(EMC_CMD_MAPPING_CMD0_0) = params->emc_cmd_mapping_cmd0_0;
|
|
EMC(EMC_CMD_MAPPING_CMD0_1) = params->emc_cmd_mapping_cmd0_1;
|
|
EMC(EMC_CMD_MAPPING_CMD0_2) = params->emc_cmd_mapping_cmd0_2;
|
|
EMC(EMC_CMD_MAPPING_CMD1_0) = params->emc_cmd_mapping_cmd1_0;
|
|
EMC(EMC_CMD_MAPPING_CMD1_1) = params->emc_cmd_mapping_cmd1_1;
|
|
EMC(EMC_CMD_MAPPING_CMD1_2) = params->emc_cmd_mapping_cmd1_2;
|
|
EMC(EMC_CMD_MAPPING_CMD2_0) = params->emc_cmd_mapping_cmd2_0;
|
|
EMC(EMC_CMD_MAPPING_CMD2_1) = params->emc_cmd_mapping_cmd2_1;
|
|
EMC(EMC_CMD_MAPPING_CMD2_2) = params->emc_cmd_mapping_cmd2_2;
|
|
EMC(EMC_CMD_MAPPING_CMD3_0) = params->emc_cmd_mapping_cmd3_0;
|
|
EMC(EMC_CMD_MAPPING_CMD3_1) = params->emc_cmd_mapping_cmd3_1;
|
|
EMC(EMC_CMD_MAPPING_CMD3_2) = params->emc_cmd_mapping_cmd3_2;
|
|
EMC(EMC_CMD_MAPPING_BYTE) = params->emc_cmd_mapping_byte;
|
|
|
|
// Program brick mapping.
|
|
EMC(EMC_PMACRO_BRICK_MAPPING_0) = params->emc_pmacro_brick_mapping0;
|
|
EMC(EMC_PMACRO_BRICK_MAPPING_1) = params->emc_pmacro_brick_mapping1;
|
|
EMC(EMC_PMACRO_BRICK_MAPPING_2) = params->emc_pmacro_brick_mapping2;
|
|
|
|
EMC(EMC_PMACRO_BRICK_CTRL_RFU1) = (params->emc_pmacro_brick_ctrl_rfu1 & 0x1120112) | 0x1EED1EED;
|
|
|
|
// This is required to do any reads from the pad macros.
|
|
EMC(EMC_CONFIG_SAMPLE_DELAY) = params->emc_config_sample_delay;
|
|
|
|
EMC(EMC_FBIO_CFG8) = params->emc_fbio_cfg8;
|
|
|
|
// Set swizzle for Rank 0.
|
|
EMC(EMC_SWIZZLE_RANK0_BYTE0) = params->emc_swizzle_rank0_byte0;
|
|
EMC(EMC_SWIZZLE_RANK0_BYTE1) = params->emc_swizzle_rank0_byte1;
|
|
EMC(EMC_SWIZZLE_RANK0_BYTE2) = params->emc_swizzle_rank0_byte2;
|
|
EMC(EMC_SWIZZLE_RANK0_BYTE3) = params->emc_swizzle_rank0_byte3;
|
|
// Set swizzle for Rank 1.
|
|
EMC(EMC_SWIZZLE_RANK1_BYTE0) = params->emc_swizzle_rank1_byte0;
|
|
EMC(EMC_SWIZZLE_RANK1_BYTE1) = params->emc_swizzle_rank1_byte1;
|
|
EMC(EMC_SWIZZLE_RANK1_BYTE2) = params->emc_swizzle_rank1_byte2;
|
|
EMC(EMC_SWIZZLE_RANK1_BYTE3) = params->emc_swizzle_rank1_byte3;
|
|
|
|
// Patch 3 using BCT spare variables.
|
|
if (params->emc_bct_spare6)
|
|
*(vu32 *)params->emc_bct_spare6 = params->emc_bct_spare7;
|
|
|
|
// Set pad controls.
|
|
EMC(EMC_XM2COMPPADCTRL) = params->emc_xm2_comp_pad_ctrl;
|
|
EMC(EMC_XM2COMPPADCTRL2) = params->emc_xm2_comp_pad_ctrl2;
|
|
EMC(EMC_XM2COMPPADCTRL3) = params->emc_xm2_comp_pad_ctrl3;
|
|
|
|
// Program Autocal controls with shadowed register fields.
|
|
EMC(EMC_AUTO_CAL_CONFIG2) = params->emc_auto_cal_config2;
|
|
EMC(EMC_AUTO_CAL_CONFIG3) = params->emc_auto_cal_config3;
|
|
EMC(EMC_AUTO_CAL_CONFIG4) = params->emc_auto_cal_config4;
|
|
EMC(EMC_AUTO_CAL_CONFIG5) = params->emc_auto_cal_config5;
|
|
EMC(EMC_AUTO_CAL_CONFIG6) = params->emc_auto_cal_config6;
|
|
EMC(EMC_AUTO_CAL_CONFIG7) = params->emc_auto_cal_config7;
|
|
EMC(EMC_AUTO_CAL_CONFIG8) = params->emc_auto_cal_config8;
|
|
|
|
EMC(EMC_PMACRO_RX_TERM) = params->emc_pmacro_rx_term;
|
|
EMC(EMC_PMACRO_DQ_TX_DRV) = params->emc_pmacro_dq_tx_drive;
|
|
EMC(EMC_PMACRO_CA_TX_DRV) = params->emc_pmacro_ca_tx_drive;
|
|
EMC(EMC_PMACRO_CMD_TX_DRV) = params->emc_pmacro_cmd_tx_drive;
|
|
EMC(EMC_PMACRO_AUTOCAL_CFG_COMMON) = params->emc_pmacro_auto_cal_common;
|
|
EMC(EMC_AUTO_CAL_CHANNEL) = params->emc_auto_cal_channel;
|
|
EMC(EMC_PMACRO_ZCTRL) = params->emc_pmacro_zcrtl;
|
|
|
|
EMC(EMC_DLL_CFG_0) = params->emc_dll_cfg0;
|
|
EMC(EMC_DLL_CFG_1) = params->emc_dll_cfg1;
|
|
EMC(EMC_CFG_DIG_DLL_1) = params->emc_cfg_dig_dll_1;
|
|
|
|
EMC(EMC_DATA_BRLSHFT_0) = params->emc_data_brlshft0;
|
|
EMC(EMC_DATA_BRLSHFT_1) = params->emc_data_brlshft1;
|
|
EMC(EMC_DQS_BRLSHFT_0) = params->emc_dqs_brlshft0;
|
|
EMC(EMC_DQS_BRLSHFT_1) = params->emc_dqs_brlshft1;
|
|
EMC(EMC_CMD_BRLSHFT_0) = params->emc_cmd_brlshft0;
|
|
EMC(EMC_CMD_BRLSHFT_1) = params->emc_cmd_brlshft1;
|
|
EMC(EMC_CMD_BRLSHFT_2) = params->emc_cmd_brlshft2;
|
|
EMC(EMC_CMD_BRLSHFT_3) = params->emc_cmd_brlshft3;
|
|
EMC(EMC_QUSE_BRLSHFT_0) = params->emc_quse_brlshft0;
|
|
EMC(EMC_QUSE_BRLSHFT_1) = params->emc_quse_brlshft1;
|
|
EMC(EMC_QUSE_BRLSHFT_2) = params->emc_quse_brlshft2;
|
|
EMC(EMC_QUSE_BRLSHFT_3) = params->emc_quse_brlshft3;
|
|
|
|
EMC(EMC_PMACRO_BRICK_CTRL_RFU1) = (params->emc_pmacro_brick_ctrl_rfu1 & 0x1BF01BF) | 0x1E401E40;
|
|
EMC(EMC_PMACRO_PAD_CFG_CTRL) = params->emc_pmacro_pad_cfg_ctrl;
|
|
|
|
EMC(EMC_PMACRO_CMD_BRICK_CTRL_FDPD) = params->emc_pmacro_cmd_brick_ctrl_fdpd;
|
|
EMC(EMC_PMACRO_BRICK_CTRL_RFU2) = params->emc_pmacro_brick_ctrl_rfu2 & 0xFF7FFF7F;
|
|
EMC(EMC_PMACRO_DATA_BRICK_CTRL_FDPD) = params->emc_pmacro_data_brick_ctrl_fdpd;
|
|
EMC(EMC_PMACRO_BG_BIAS_CTRL_0) = params->emc_pmacro_bg_bias_ctrl0;
|
|
EMC(EMC_PMACRO_DATA_PAD_RX_CTRL) = params->emc_pmacro_data_pad_rx_ctrl;
|
|
EMC(EMC_PMACRO_CMD_PAD_RX_CTRL) = params->emc_pmacro_cmd_pad_rx_ctrl;
|
|
EMC(EMC_PMACRO_DATA_PAD_TX_CTRL) = params->emc_pmacro_data_pad_tx_ctrl;
|
|
EMC(EMC_PMACRO_DATA_RX_TERM_MODE) = params->emc_pmacro_data_rx_term_mode;
|
|
EMC(EMC_PMACRO_CMD_RX_TERM_MODE) = params->emc_pmacro_cmd_rx_term_mode;
|
|
EMC(EMC_PMACRO_CMD_PAD_TX_CTRL) = params->emc_pmacro_cmd_pad_tx_ctrl;
|
|
|
|
EMC(EMC_CFG_3) = params->emc_cfg3;
|
|
EMC(EMC_PMACRO_TX_PWRD_0) = params->emc_pmacro_tx_pwrd0;
|
|
EMC(EMC_PMACRO_TX_PWRD_1) = params->emc_pmacro_tx_pwrd1;
|
|
EMC(EMC_PMACRO_TX_PWRD_2) = params->emc_pmacro_tx_pwrd2;
|
|
EMC(EMC_PMACRO_TX_PWRD_3) = params->emc_pmacro_tx_pwrd3;
|
|
EMC(EMC_PMACRO_TX_PWRD_4) = params->emc_pmacro_tx_pwrd4;
|
|
EMC(EMC_PMACRO_TX_PWRD_5) = params->emc_pmacro_tx_pwrd5;
|
|
EMC(EMC_PMACRO_TX_SEL_CLK_SRC_0) = params->emc_pmacro_tx_sel_clk_src0;
|
|
EMC(EMC_PMACRO_TX_SEL_CLK_SRC_1) = params->emc_pmacro_tx_sel_clk_src1;
|
|
EMC(EMC_PMACRO_TX_SEL_CLK_SRC_2) = params->emc_pmacro_tx_sel_clk_src2;
|
|
EMC(EMC_PMACRO_TX_SEL_CLK_SRC_3) = params->emc_pmacro_tx_sel_clk_src3;
|
|
EMC(EMC_PMACRO_TX_SEL_CLK_SRC_4) = params->emc_pmacro_tx_sel_clk_src4;
|
|
EMC(EMC_PMACRO_TX_SEL_CLK_SRC_5) = params->emc_pmacro_tx_sel_clk_src5;
|
|
EMC(EMC_PMACRO_DDLL_BYPASS) = params->emc_pmacro_ddll_bypass;
|
|
EMC(EMC_PMACRO_DDLL_PWRD_0) = params->emc_pmacro_ddll_pwrd0;
|
|
EMC(EMC_PMACRO_DDLL_PWRD_1) = params->emc_pmacro_ddll_pwrd1;
|
|
EMC(EMC_PMACRO_DDLL_PWRD_2) = params->emc_pmacro_ddll_pwrd2;
|
|
EMC(EMC_PMACRO_CMD_CTRL_0) = params->emc_pmacro_cmd_ctrl0;
|
|
EMC(EMC_PMACRO_CMD_CTRL_1) = params->emc_pmacro_cmd_ctrl1;
|
|
EMC(EMC_PMACRO_CMD_CTRL_2) = params->emc_pmacro_cmd_ctrl2;
|
|
EMC(EMC_PMACRO_IB_VREF_DQ_0) = params->emc_pmacro_ib_vref_dq_0;
|
|
EMC(EMC_PMACRO_IB_VREF_DQ_1) = params->emc_pmacro_ib_vref_dq_1;
|
|
EMC(EMC_PMACRO_IB_VREF_DQS_0) = params->emc_pmacro_ib_vref_dqs_0;
|
|
EMC(EMC_PMACRO_IB_VREF_DQS_1) = params->emc_pmacro_ib_vref_dqs_1;
|
|
EMC(EMC_PMACRO_IB_RXRT) = params->emc_pmacro_ib_rxrt;
|
|
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK0_0) = params->emc_pmacro_quse_ddll_rank0_0;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK0_1) = params->emc_pmacro_quse_ddll_rank0_1;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK0_2) = params->emc_pmacro_quse_ddll_rank0_2;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK0_3) = params->emc_pmacro_quse_ddll_rank0_3;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK0_4) = params->emc_pmacro_quse_ddll_rank0_4;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK0_5) = params->emc_pmacro_quse_ddll_rank0_5;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK1_0) = params->emc_pmacro_quse_ddll_rank1_0;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK1_1) = params->emc_pmacro_quse_ddll_rank1_1;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK1_2) = params->emc_pmacro_quse_ddll_rank1_2;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK1_3) = params->emc_pmacro_quse_ddll_rank1_3;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK1_4) = params->emc_pmacro_quse_ddll_rank1_4;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK1_5) = params->emc_pmacro_quse_ddll_rank1_5;
|
|
EMC(EMC_PMACRO_BRICK_CTRL_RFU1) = params->emc_pmacro_brick_ctrl_rfu1;
|
|
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_0) = params->emc_pmacro_ob_ddll_long_dq_rank0_0;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_1) = params->emc_pmacro_ob_ddll_long_dq_rank0_1;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_2) = params->emc_pmacro_ob_ddll_long_dq_rank0_2;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_3) = params->emc_pmacro_ob_ddll_long_dq_rank0_3;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_4) = params->emc_pmacro_ob_ddll_long_dq_rank0_4;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_5) = params->emc_pmacro_ob_ddll_long_dq_rank0_5;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_0) = params->emc_pmacro_ob_ddll_long_dq_rank1_0;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_1) = params->emc_pmacro_ob_ddll_long_dq_rank1_1;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_2) = params->emc_pmacro_ob_ddll_long_dq_rank1_2;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_3) = params->emc_pmacro_ob_ddll_long_dq_rank1_3;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_4) = params->emc_pmacro_ob_ddll_long_dq_rank1_4;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_5) = params->emc_pmacro_ob_ddll_long_dq_rank1_5;
|
|
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_0) = params->emc_pmacro_ob_ddll_long_dqs_rank0_0;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_1) = params->emc_pmacro_ob_ddll_long_dqs_rank0_1;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_2) = params->emc_pmacro_ob_ddll_long_dqs_rank0_2;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_3) = params->emc_pmacro_ob_ddll_long_dqs_rank0_3;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_4) = params->emc_pmacro_ob_ddll_long_dqs_rank0_4;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_5) = params->emc_pmacro_ob_ddll_long_dqs_rank0_5;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_0) = params->emc_pmacro_ob_ddll_long_dqs_rank1_0;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_1) = params->emc_pmacro_ob_ddll_long_dqs_rank1_1;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_2) = params->emc_pmacro_ob_ddll_long_dqs_rank1_2;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_3) = params->emc_pmacro_ob_ddll_long_dqs_rank1_3;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_4) = params->emc_pmacro_ob_ddll_long_dqs_rank1_4;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_5) = params->emc_pmacro_ob_ddll_long_dqs_rank1_5;
|
|
EMC(EMC_PMACRO_IB_DDLL_LONG_DQS_RANK0_0) = params->emc_pmacro_ib_ddll_long_dqs_rank0_0;
|
|
EMC(EMC_PMACRO_IB_DDLL_LONG_DQS_RANK0_1) = params->emc_pmacro_ib_ddll_long_dqs_rank0_1;
|
|
EMC(EMC_PMACRO_IB_DDLL_LONG_DQS_RANK0_2) = params->emc_pmacro_ib_ddll_long_dqs_rank0_2;
|
|
EMC(EMC_PMACRO_IB_DDLL_LONG_DQS_RANK0_3) = params->emc_pmacro_ib_ddll_long_dqs_rank0_3;
|
|
EMC(EMC_PMACRO_IB_DDLL_LONG_DQS_RANK1_0) = params->emc_pmacro_ib_ddll_long_dqs_rank1_0;
|
|
EMC(EMC_PMACRO_IB_DDLL_LONG_DQS_RANK1_1) = params->emc_pmacro_ib_ddll_long_dqs_rank1_1;
|
|
EMC(EMC_PMACRO_IB_DDLL_LONG_DQS_RANK1_2) = params->emc_pmacro_ib_ddll_long_dqs_rank1_2;
|
|
EMC(EMC_PMACRO_IB_DDLL_LONG_DQS_RANK1_3) = params->emc_pmacro_ib_ddll_long_dqs_rank1_3;
|
|
|
|
EMC(EMC_PMACRO_DDLL_LONG_CMD_0) = params->emc_pmacro_ddll_long_cmd_0;
|
|
EMC(EMC_PMACRO_DDLL_LONG_CMD_1) = params->emc_pmacro_ddll_long_cmd_1;
|
|
EMC(EMC_PMACRO_DDLL_LONG_CMD_2) = params->emc_pmacro_ddll_long_cmd_2;
|
|
EMC(EMC_PMACRO_DDLL_LONG_CMD_3) = params->emc_pmacro_ddll_long_cmd_3;
|
|
EMC(EMC_PMACRO_DDLL_LONG_CMD_4) = params->emc_pmacro_ddll_long_cmd_4;
|
|
EMC(EMC_PMACRO_DDLL_SHORT_CMD_0) = params->emc_pmacro_ddll_short_cmd_0;
|
|
EMC(EMC_PMACRO_DDLL_SHORT_CMD_1) = params->emc_pmacro_ddll_short_cmd_1;
|
|
EMC(EMC_PMACRO_DDLL_SHORT_CMD_2) = params->emc_pmacro_ddll_short_cmd_2;
|
|
|
|
// Common pad macro (cpm).
|
|
EMC(EMC_PMACRO_COMMON_PAD_TX_CTRL) = (params->emc_pmacro_common_pad_tx_ctrl & 1) | 0xE;
|
|
|
|
// Patch 4 using BCT spare variables.
|
|
if (params->emc_bct_spare4)
|
|
*(vu32 *)params->emc_bct_spare4 = params->emc_bct_spare5;
|
|
|
|
EMC(EMC_TIMING_CONTROL) = 1; // Trigger timing update so above writes take place.
|
|
|
|
// Initialize MC VPR settings.
|
|
MC(MC_VIDEO_PROTECT_BOM) = params->mc_video_protect_bom;
|
|
MC(MC_VIDEO_PROTECT_BOM_ADR_HI) = params->mc_video_protect_bom_adr_hi;
|
|
MC(MC_VIDEO_PROTECT_SIZE_MB) = params->mc_video_protect_size_mb;
|
|
MC(MC_VIDEO_PROTECT_VPR_OVERRIDE) = params->mc_video_protect_vpr_override;
|
|
MC(MC_VIDEO_PROTECT_VPR_OVERRIDE1) = params->mc_video_protect_vpr_override1;
|
|
MC(MC_VIDEO_PROTECT_GPU_OVERRIDE_0) = params->mc_video_protect_gpu_override0;
|
|
MC(MC_VIDEO_PROTECT_GPU_OVERRIDE_1) = params->mc_video_protect_gpu_override1;
|
|
|
|
// Program SDRAM geometry parameters.
|
|
MC(MC_EMEM_ADR_CFG) = params->mc_emem_adr_cfg;
|
|
MC(MC_EMEM_ADR_CFG_DEV0) = params->mc_emem_adr_cfg_dev0;
|
|
MC(MC_EMEM_ADR_CFG_DEV1) = params->mc_emem_adr_cfg_dev1;
|
|
MC(MC_EMEM_ADR_CFG_CHANNEL_MASK) = params->mc_emem_adr_cfg_channel_mask;
|
|
|
|
// Program bank swizzling.
|
|
MC(MC_EMEM_ADR_CFG_BANK_MASK_0) = params->mc_emem_adr_cfg_bank_mask0;
|
|
MC(MC_EMEM_ADR_CFG_BANK_MASK_1) = params->mc_emem_adr_cfg_bank_mask1;
|
|
MC(MC_EMEM_ADR_CFG_BANK_MASK_2) = params->mc_emem_adr_cfg_bank_mask2;
|
|
|
|
// Program external memory aperture (base and size).
|
|
MC(MC_EMEM_CFG) = params->mc_emem_cfg;
|
|
|
|
// Program SEC carveout (base and size).
|
|
MC(MC_SEC_CARVEOUT_BOM) = params->mc_sec_carveout_bom;
|
|
MC(MC_SEC_CARVEOUT_ADR_HI) = params->mc_sec_carveout_adr_hi;
|
|
MC(MC_SEC_CARVEOUT_SIZE_MB) = params->mc_sec_carveout_size_mb;
|
|
|
|
// Program MTS carveout (base and size).
|
|
MC(MC_MTS_CARVEOUT_BOM) = params->mc_mts_carveout_bom;
|
|
MC(MC_MTS_CARVEOUT_ADR_HI) = params->mc_mts_carveout_adr_hi;
|
|
MC(MC_MTS_CARVEOUT_SIZE_MB) = params->mc_mts_carveout_size_mb;
|
|
|
|
// Program the memory arbiter.
|
|
MC(MC_EMEM_ARB_CFG) = params->mc_emem_arb_cfg;
|
|
MC(MC_EMEM_ARB_OUTSTANDING_REQ) = params->mc_emem_arb_outstanding_req;
|
|
MC(MC_EMEM_ARB_REFPB_HP_CTRL) = params->emc_emem_arb_refpb_hp_ctrl;
|
|
MC(MC_EMEM_ARB_REFPB_BANK_CTRL) = params->emc_emem_arb_refpb_bank_ctrl;
|
|
MC(MC_EMEM_ARB_TIMING_RCD) = params->mc_emem_arb_timing_rcd;
|
|
MC(MC_EMEM_ARB_TIMING_RP) = params->mc_emem_arb_timing_rp;
|
|
MC(MC_EMEM_ARB_TIMING_RC) = params->mc_emem_arb_timing_rc;
|
|
MC(MC_EMEM_ARB_TIMING_RAS) = params->mc_emem_arb_timing_ras;
|
|
MC(MC_EMEM_ARB_TIMING_FAW) = params->mc_emem_arb_timing_faw;
|
|
MC(MC_EMEM_ARB_TIMING_RRD) = params->mc_emem_arb_timing_rrd;
|
|
MC(MC_EMEM_ARB_TIMING_RAP2PRE) = params->mc_emem_arb_timing_rap2pre;
|
|
MC(MC_EMEM_ARB_TIMING_WAP2PRE) = params->mc_emem_arb_timing_wap2pre;
|
|
MC(MC_EMEM_ARB_TIMING_R2R) = params->mc_emem_arb_timing_r2r;
|
|
MC(MC_EMEM_ARB_TIMING_W2W) = params->mc_emem_arb_timing_w2w;
|
|
MC(MC_EMEM_ARB_TIMING_CCDMW) = params->mc_emem_arb_timing_ccdmw;
|
|
MC(MC_EMEM_ARB_TIMING_R2W) = params->mc_emem_arb_timing_r2w;
|
|
MC(MC_EMEM_ARB_TIMING_W2R) = params->mc_emem_arb_timing_w2r;
|
|
MC(MC_EMEM_ARB_TIMING_RFCPB) = params->mc_emem_arb_timing_rfcpb;
|
|
MC(MC_EMEM_ARB_DA_TURNS) = params->mc_emem_arb_da_turns;
|
|
MC(MC_EMEM_ARB_DA_COVERS) = params->mc_emem_arb_da_covers;
|
|
MC(MC_EMEM_ARB_MISC0) = params->mc_emem_arb_misc0;
|
|
MC(MC_EMEM_ARB_MISC1) = params->mc_emem_arb_misc1;
|
|
MC(MC_EMEM_ARB_MISC2) = params->mc_emem_arb_misc2;
|
|
MC(MC_EMEM_ARB_RING1_THROTTLE) = params->mc_emem_arb_ring1_throttle;
|
|
MC(MC_EMEM_ARB_OVERRIDE) = params->mc_emem_arb_override;
|
|
MC(MC_EMEM_ARB_OVERRIDE_1) = params->mc_emem_arb_override1;
|
|
MC(MC_EMEM_ARB_RSV) = params->mc_emem_arb_rsv;
|
|
MC(MC_DA_CONFIG0) = params->mc_da_cfg0;
|
|
|
|
MC(MC_TIMING_CONTROL) = 1; // Trigger MC timing update.
|
|
|
|
// Program second-level clock enable overrides.
|
|
MC(MC_CLKEN_OVERRIDE) = params->mc_clken_override;
|
|
|
|
// Program statistics gathering.
|
|
MC(MC_STAT_CONTROL) = params->mc_stat_control;
|
|
|
|
// Program SDRAM geometry parameters.
|
|
EMC(EMC_ADR_CFG) = params->emc_adr_cfg;
|
|
|
|
// Program second-level clock enable overrides.
|
|
EMC(EMC_CLKEN_OVERRIDE) = params->emc_clken_override;
|
|
|
|
// Program EMC pad auto calibration.
|
|
EMC(EMC_PMACRO_AUTOCAL_CFG_0) = params->emc_pmacro_auto_cal_cfg0;
|
|
EMC(EMC_PMACRO_AUTOCAL_CFG_1) = params->emc_pmacro_auto_cal_cfg1;
|
|
EMC(EMC_PMACRO_AUTOCAL_CFG_2) = params->emc_pmacro_auto_cal_cfg2;
|
|
|
|
EMC(EMC_AUTO_CAL_VREF_SEL_0) = params->emc_auto_cal_vref_sel0;
|
|
EMC(EMC_AUTO_CAL_VREF_SEL_1) = params->emc_auto_cal_vref_sel1;
|
|
|
|
EMC(EMC_AUTO_CAL_INTERVAL) = params->emc_auto_cal_interval;
|
|
EMC(EMC_AUTO_CAL_CONFIG) = params->emc_auto_cal_config;
|
|
usleep(params->emc_auto_cal_wait);
|
|
|
|
// Patch 5 using BCT spare variables.
|
|
if (params->emc_bct_spare8)
|
|
*(vu32 *)params->emc_bct_spare8 = params->emc_bct_spare9;
|
|
|
|
// Program EMC timing configuration.
|
|
EMC(EMC_CFG_2) = params->emc_cfg2;
|
|
EMC(EMC_CFG_PIPE) = params->emc_cfg_pipe;
|
|
EMC(EMC_CFG_PIPE_1) = params->emc_cfg_pipe1;
|
|
EMC(EMC_CFG_PIPE_2) = params->emc_cfg_pipe2;
|
|
EMC(EMC_CMDQ) = params->emc_cmd_q;
|
|
EMC(EMC_MC2EMCQ) = params->emc_mc2emc_q;
|
|
EMC(EMC_MRS_WAIT_CNT) = params->emc_mrs_wait_cnt;
|
|
EMC(EMC_MRS_WAIT_CNT2) = params->emc_mrs_wait_cnt2;
|
|
EMC(EMC_FBIO_CFG5) = params->emc_fbio_cfg5;
|
|
EMC(EMC_RC) = params->emc_rc;
|
|
EMC(EMC_RFC) = params->emc_rfc;
|
|
EMC(EMC_RFCPB) = params->emc_rfc_pb;
|
|
EMC(EMC_REFCTRL2) = params->emc_ref_ctrl2;
|
|
EMC(EMC_RFC_SLR) = params->emc_rfc_slr;
|
|
EMC(EMC_RAS) = params->emc_ras;
|
|
EMC(EMC_RP) = params->emc_rp;
|
|
EMC(EMC_TPPD) = params->emc_tppd;
|
|
EMC(EMC_R2R) = params->emc_r2r;
|
|
EMC(EMC_W2W) = params->emc_w2w;
|
|
EMC(EMC_R2W) = params->emc_r2w;
|
|
EMC(EMC_W2R) = params->emc_w2r;
|
|
EMC(EMC_R2P) = params->emc_r2p;
|
|
EMC(EMC_W2P) = params->emc_w2p;
|
|
EMC(EMC_CCDMW) = params->emc_ccdmw;
|
|
EMC(EMC_RD_RCD) = params->emc_rd_rcd;
|
|
EMC(EMC_WR_RCD) = params->emc_wr_rcd;
|
|
EMC(EMC_RRD) = params->emc_rrd;
|
|
EMC(EMC_REXT) = params->emc_rext;
|
|
EMC(EMC_WEXT) = params->emc_wext;
|
|
EMC(EMC_WDV) = params->emc_wdv;
|
|
EMC(EMC_WDV_CHK) = params->emc_wdv_chk;
|
|
EMC(EMC_WSV) = params->emc_wsv;
|
|
EMC(EMC_WEV) = params->emc_wev;
|
|
EMC(EMC_WDV_MASK) = params->emc_wdv_mask;
|
|
EMC(EMC_WS_DURATION) = params->emc_ws_duration;
|
|
EMC(EMC_WE_DURATION) = params->emc_we_duration;
|
|
EMC(EMC_QUSE) = params->emc_quse;
|
|
EMC(EMC_QUSE_WIDTH) = params->emc_quse_width;
|
|
EMC(EMC_IBDLY) = params->emc_ibdly;
|
|
EMC(EMC_OBDLY) = params->emc_obdly;
|
|
EMC(EMC_EINPUT) = params->emc_einput;
|
|
EMC(EMC_EINPUT_DURATION) = params->emc_einput_duration;
|
|
EMC(EMC_PUTERM_EXTRA) = params->emc_puterm_extra;
|
|
EMC(EMC_PUTERM_WIDTH) = params->emc_puterm_width;
|
|
|
|
EMC(EMC_PMACRO_COMMON_PAD_TX_CTRL) = params->emc_pmacro_common_pad_tx_ctrl;
|
|
EMC(EMC_DBG) = params->emc_dbg;
|
|
EMC(EMC_QRST) = params->emc_qrst;
|
|
EMC(EMC_ISSUE_QRST) = 1;
|
|
EMC(EMC_ISSUE_QRST) = 0;
|
|
EMC(EMC_QSAFE) = params->emc_qsafe;
|
|
EMC(EMC_RDV) = params->emc_rdv;
|
|
EMC(EMC_RDV_MASK) = params->emc_rdv_mask;
|
|
EMC(EMC_RDV_EARLY) = params->emc_rdv_early;
|
|
EMC(EMC_RDV_EARLY_MASK) = params->emc_rdv_early_mask;
|
|
EMC(EMC_QPOP) = params->emc_qpop;
|
|
EMC(EMC_REFRESH) = params->emc_refresh;
|
|
EMC(EMC_BURST_REFRESH_NUM) = params->emc_burst_refresh_num;
|
|
EMC(EMC_PRE_REFRESH_REQ_CNT) = params->emc_prerefresh_req_cnt;
|
|
EMC(EMC_PDEX2WR) = params->emc_pdex2wr;
|
|
EMC(EMC_PDEX2RD) = params->emc_pdex2rd;
|
|
EMC(EMC_PCHG2PDEN) = params->emc_pchg2pden;
|
|
EMC(EMC_ACT2PDEN) = params->emc_act2pden;
|
|
EMC(EMC_AR2PDEN) = params->emc_ar2pden;
|
|
EMC(EMC_RW2PDEN) = params->emc_rw2pden;
|
|
EMC(EMC_CKE2PDEN) = params->emc_cke2pden;
|
|
EMC(EMC_PDEX2CKE) = params->emc_pdex2che;
|
|
EMC(EMC_PDEX2MRR) = params->emc_pdex2mrr;
|
|
EMC(EMC_TXSR) = params->emc_txsr;
|
|
EMC(EMC_TXSRDLL) = params->emc_txsr_dll;
|
|
EMC(EMC_TCKE) = params->emc_tcke;
|
|
EMC(EMC_TCKESR) = params->emc_tckesr;
|
|
EMC(EMC_TPD) = params->emc_tpd;
|
|
EMC(EMC_TFAW) = params->emc_tfaw;
|
|
EMC(EMC_TRPAB) = params->emc_trpab;
|
|
EMC(EMC_TCLKSTABLE) = params->emc_tclkstable;
|
|
EMC(EMC_TCLKSTOP) = params->emc_tclkstop;
|
|
EMC(EMC_TREFBW) = params->emc_trefbw;
|
|
EMC(EMC_ODT_WRITE) = params->emc_odt_write;
|
|
EMC(EMC_CFG_DIG_DLL) = params->emc_cfg_dig_dll;
|
|
EMC(EMC_CFG_DIG_DLL_PERIOD) = params->emc_cfg_dig_dll_period;
|
|
|
|
// Don't write CFG_ADR_EN (bit 1) here - lock bit written later.
|
|
EMC(EMC_FBIO_SPARE) = params->emc_fbio_spare & 0xFFFFFFFD;
|
|
EMC(EMC_CFG_RSV) = params->emc_cfg_rsv;
|
|
EMC(EMC_PMC_SCRATCH1) = params->emc_pmc_scratch1;
|
|
EMC(EMC_PMC_SCRATCH2) = params->emc_pmc_scratch2;
|
|
EMC(EMC_PMC_SCRATCH3) = params->emc_pmc_scratch3;
|
|
EMC(EMC_ACPD_CONTROL) = params->emc_acpd_control;
|
|
EMC(EMC_TXDSRVTTGEN) = params->emc_txdsrvttgen;
|
|
|
|
// Set pipe bypass enable bits before sending any DRAM commands.
|
|
EMC(EMC_CFG) = (params->emc_cfg & 0xE) | 0x3C00000;
|
|
|
|
// Patch BootROM.
|
|
if (params->boot_rom_patch_control & BIT(31))
|
|
{
|
|
*(vu32 *)(APB_MISC_BASE + params->boot_rom_patch_control * 4) = params->boot_rom_patch_data;
|
|
MC(MC_TIMING_CONTROL) = 1; // Trigger MC timing update.
|
|
}
|
|
|
|
// Release SEL_DPD_CMD.
|
|
PMC(APBDEV_PMC_IO_DPD3_REQ) = ((params->emc_pmc_scratch1 & 0x3FFFFFFF) | 0x40000000) & 0xCFFF0000;
|
|
usleep(params->pmc_io_dpd3_req_wait);
|
|
|
|
// Set autocal interval if not configured.
|
|
if (!params->emc_auto_cal_interval)
|
|
EMC(EMC_AUTO_CAL_CONFIG) = params->emc_auto_cal_config | 0x200;
|
|
|
|
EMC(EMC_PMACRO_BRICK_CTRL_RFU2) = params->emc_pmacro_brick_ctrl_rfu2;
|
|
|
|
// ZQ CAL setup (not actually issuing ZQ CAL now).
|
|
if (params->emc_zcal_warm_cold_boot_enables & 1)
|
|
{
|
|
if (params->memory_type == MEMORY_TYPE_DDR3L)
|
|
EMC(EMC_ZCAL_WAIT_CNT) = params->emc_zcal_wait_cnt << 3;
|
|
if (params->memory_type == MEMORY_TYPE_LPDDR4)
|
|
{
|
|
EMC(EMC_ZCAL_WAIT_CNT) = params->emc_zcal_wait_cnt;
|
|
EMC(EMC_ZCAL_MRW_CMD) = params->emc_zcal_mrw_cmd;
|
|
}
|
|
}
|
|
|
|
EMC(EMC_TIMING_CONTROL) = 1; // Trigger timing update so above writes take place.
|
|
usleep(params->emc_timing_control_wait);
|
|
|
|
// Deassert HOLD_CKE_LOW.
|
|
PMC(APBDEV_PMC_DDR_CNTRL) &= 0xFFF8007F;
|
|
usleep(params->pmc_ddr_ctrl_wait);
|
|
|
|
// Set clock enable signal.
|
|
u32 pin_gpio_cfg = (params->emc_pin_gpio_enable << 16) | (params->emc_pin_gpio << 12);
|
|
if (params->memory_type == MEMORY_TYPE_DDR3L || params->memory_type == MEMORY_TYPE_LPDDR4)
|
|
{
|
|
EMC(EMC_PIN) = pin_gpio_cfg;
|
|
(void)EMC(EMC_PIN);
|
|
usleep(params->emc_pin_extra_wait + 200);
|
|
EMC(EMC_PIN) = pin_gpio_cfg | 0x100;
|
|
(void)EMC(EMC_PIN);
|
|
}
|
|
|
|
if (params->memory_type == MEMORY_TYPE_LPDDR4)
|
|
usleep(params->emc_pin_extra_wait + 2000);
|
|
else if (params->memory_type == MEMORY_TYPE_DDR3L)
|
|
usleep(params->emc_pin_extra_wait + 500);
|
|
|
|
// Enable clock enable signal.
|
|
EMC(EMC_PIN) = pin_gpio_cfg | 0x101;
|
|
(void)EMC(EMC_PIN);
|
|
usleep(params->emc_pin_program_wait);
|
|
|
|
// Send NOP (trigger just needs to be non-zero).
|
|
if (params->memory_type != MEMORY_TYPE_LPDDR4)
|
|
EMC(EMC_NOP) = (params->emc_dev_select << 30) + 1;
|
|
|
|
// On coldboot w/LPDDR2/3, wait 200 uSec after asserting CKE high.
|
|
if (params->memory_type == MEMORY_TYPE_LPDDR2)
|
|
usleep(params->emc_pin_extra_wait + 200);
|
|
|
|
// Init zq calibration,
|
|
if (params->memory_type == MEMORY_TYPE_LPDDR4)
|
|
{
|
|
// Patch 6 using BCT spare variables.
|
|
if (params->emc_bct_spare10)
|
|
*(vu32 *)params->emc_bct_spare10 = params->emc_bct_spare11;
|
|
|
|
// Write mode registers.
|
|
EMC(EMC_MRW2) = params->emc_mrw2;
|
|
EMC(EMC_MRW) = params->emc_mrw1;
|
|
EMC(EMC_MRW3) = params->emc_mrw3;
|
|
EMC(EMC_MRW4) = params->emc_mrw4;
|
|
EMC(EMC_MRW6) = params->emc_mrw6;
|
|
EMC(EMC_MRW14) = params->emc_mrw14;
|
|
|
|
EMC(EMC_MRW8) = params->emc_mrw8;
|
|
EMC(EMC_MRW12) = params->emc_mrw12;
|
|
EMC(EMC_MRW9) = params->emc_mrw9;
|
|
EMC(EMC_MRW13) = params->emc_mrw13;
|
|
|
|
if (params->emc_zcal_warm_cold_boot_enables & 1)
|
|
{
|
|
// Issue ZQCAL start, device 0.
|
|
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev0;
|
|
usleep(params->emc_zcal_init_wait);
|
|
|
|
// Issue ZQCAL latch.
|
|
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev0 ^ 3;
|
|
// Same for device 1.
|
|
if (!(params->emc_dev_select & 2))
|
|
{
|
|
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev1;
|
|
usleep(params->emc_zcal_init_wait);
|
|
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev1 ^ 3;
|
|
}
|
|
}
|
|
}
|
|
|
|
// Set package and DPD pad control.
|
|
PMC(APBDEV_PMC_DDR_CFG) = params->pmc_ddr_cfg;
|
|
|
|
// Start periodic ZQ calibration (LPDDRx only).
|
|
if (params->memory_type && params->memory_type <= MEMORY_TYPE_LPDDR4)
|
|
{
|
|
EMC(EMC_ZCAL_INTERVAL) = params->emc_zcal_interval;
|
|
EMC(EMC_ZCAL_WAIT_CNT) = params->emc_zcal_wait_cnt;
|
|
EMC(EMC_ZCAL_MRW_CMD) = params->emc_zcal_mrw_cmd;
|
|
}
|
|
|
|
// Patch 7 using BCT spare variables.
|
|
if (params->emc_bct_spare12)
|
|
*(vu32 *)params->emc_bct_spare12 = params->emc_bct_spare13;
|
|
|
|
EMC(EMC_TIMING_CONTROL) = 1; // Trigger timing update so above writes take place.
|
|
|
|
if (params->emc_extra_refresh_num)
|
|
EMC(EMC_REF) = (((1 << params->emc_extra_refresh_num) - 1) << 8) | (params->emc_dev_select << 30) | 3;
|
|
|
|
// Enable refresh.
|
|
EMC(EMC_REFCTRL) = params->emc_dev_select | 0x80000000;
|
|
|
|
EMC(EMC_DYN_SELF_REF_CONTROL) = params->emc_dyn_self_ref_control;
|
|
EMC(EMC_CFG_UPDATE) = params->emc_cfg_update;
|
|
EMC(EMC_CFG) = params->emc_cfg;
|
|
EMC(EMC_FDPD_CTRL_DQ) = params->emc_fdpd_ctrl_dq;
|
|
EMC(EMC_FDPD_CTRL_CMD) = params->emc_fdpd_ctrl_cmd;
|
|
EMC(EMC_SEL_DPD_CTRL) = params->emc_sel_dpd_ctrl;
|
|
|
|
// Write addr swizzle lock bit.
|
|
EMC(EMC_FBIO_SPARE) = params->emc_fbio_spare | 2;
|
|
|
|
EMC(EMC_TIMING_CONTROL) = 1; // Re-trigger timing to latch power saving functions.
|
|
|
|
// Enable EMC pipe clock gating.
|
|
EMC(EMC_CFG_PIPE_CLK) = params->emc_cfg_pipe_clk;
|
|
|
|
// Depending on freqency, enable CMD/CLK fdpd.
|
|
EMC(EMC_FDPD_CTRL_CMD_NO_RAMP) = params->emc_fdpd_ctrl_cmd_no_ramp;
|
|
|
|
// Enable arbiter.
|
|
SYSREG(AHB_ARBITRATION_XBAR_CTRL) = (SYSREG(AHB_ARBITRATION_XBAR_CTRL) & 0xFFFEFFFF) | (params->ahb_arbitration_xbar_ctrl_meminit_done << 16);
|
|
|
|
// Lock carveouts per BCT cfg.
|
|
MC(MC_VIDEO_PROTECT_REG_CTRL) = params->mc_video_protect_write_access;
|
|
MC(MC_SEC_CARVEOUT_REG_CTRL) = params->mc_sec_carveout_protect_write_access;
|
|
MC(MC_MTS_CARVEOUT_REG_CTRL) = params->mc_mts_carveout_reg_ctrl;
|
|
|
|
// Disable write access to a bunch of EMC registers.
|
|
MC(MC_EMEM_CFG_ACCESS_CTRL) = 1;
|
|
}
|
|
|
|
static void _sdram_config_t210b01(const sdram_params_t210b01_t *params)
|
|
{
|
|
u32 pmc_scratch1 = ~params->emc_pmc_scratch1;
|
|
u32 pmc_scratch2 = ~params->emc_pmc_scratch2;
|
|
|
|
// Override HW FSM if needed.
|
|
if (params->clk_rst_pllm_misc20_override_enable)
|
|
CLOCK(CLK_RST_CONTROLLER_PLLM_MISC2) = params->clk_rst_pllm_misc20_override;
|
|
|
|
// Program DPD3/DPD4 regs (coldboot path).
|
|
// Enable sel_dpd on unused pins.
|
|
PMC(APBDEV_PMC_WEAK_BIAS) = (pmc_scratch1 & 0x1000) << 19 | (pmc_scratch1 & 0xFFF) << 18 | (pmc_scratch1 & 0x8000) << 15;
|
|
PMC(APBDEV_PMC_IO_DPD3_REQ) = (pmc_scratch1 & 0x9FFF) + 0x80000000;
|
|
usleep(params->pmc_io_dpd3_req_wait);
|
|
|
|
// Disable e_dpd_vttgen.
|
|
PMC(APBDEV_PMC_IO_DPD4_REQ) = (pmc_scratch2 & 0x3FFF0000) | 0x80000000;
|
|
usleep(params->pmc_io_dpd4_req_wait);
|
|
|
|
// Disable e_dpd_bg.
|
|
PMC(APBDEV_PMC_IO_DPD4_REQ) = (pmc_scratch2 & 0x1FFF) | 0x80000000;
|
|
usleep(1);
|
|
|
|
// Program CMD mapping. Required before brick mapping, else
|
|
// we can't guarantee CK will be differential at all times.
|
|
EMC(EMC_FBIO_CFG7) = params->emc_fbio_cfg7;
|
|
EMC(EMC_CMD_MAPPING_CMD0_0) = params->emc_cmd_mapping_cmd0_0;
|
|
EMC(EMC_CMD_MAPPING_CMD0_1) = params->emc_cmd_mapping_cmd0_1;
|
|
EMC(EMC_CMD_MAPPING_CMD0_2) = params->emc_cmd_mapping_cmd0_2;
|
|
EMC(EMC_CMD_MAPPING_CMD1_0) = params->emc_cmd_mapping_cmd1_0;
|
|
EMC(EMC_CMD_MAPPING_CMD1_1) = params->emc_cmd_mapping_cmd1_1;
|
|
EMC(EMC_CMD_MAPPING_CMD1_2) = params->emc_cmd_mapping_cmd1_2;
|
|
EMC(EMC_CMD_MAPPING_CMD2_0) = params->emc_cmd_mapping_cmd2_0;
|
|
EMC(EMC_CMD_MAPPING_CMD2_1) = params->emc_cmd_mapping_cmd2_1;
|
|
EMC(EMC_CMD_MAPPING_CMD2_2) = params->emc_cmd_mapping_cmd2_2;
|
|
EMC(EMC_CMD_MAPPING_CMD3_0) = params->emc_cmd_mapping_cmd3_0;
|
|
EMC(EMC_CMD_MAPPING_CMD3_1) = params->emc_cmd_mapping_cmd3_1;
|
|
EMC(EMC_CMD_MAPPING_CMD3_2) = params->emc_cmd_mapping_cmd3_2;
|
|
EMC(EMC_CMD_MAPPING_BYTE) = params->emc_cmd_mapping_byte;
|
|
|
|
// Program brick mapping.
|
|
EMC(EMC_PMACRO_BRICK_MAPPING_0) = params->emc_pmacro_brick_mapping0;
|
|
EMC(EMC_PMACRO_BRICK_MAPPING_1) = params->emc_pmacro_brick_mapping1;
|
|
EMC(EMC_PMACRO_BRICK_MAPPING_2) = params->emc_pmacro_brick_mapping2;
|
|
|
|
// Set pad macros.
|
|
EMC(EMC_PMACRO_VTTGEN_CTRL_0) = params->emc_pmacro_vttgen_ctrl0;
|
|
EMC(EMC_PMACRO_VTTGEN_CTRL_1) = params->emc_pmacro_vttgen_ctrl1;
|
|
EMC(EMC_PMACRO_VTTGEN_CTRL_2) = params->emc_pmacro_vttgen_ctrl2;
|
|
|
|
// Set pad macros bias.
|
|
EMC(EMC_PMACRO_BG_BIAS_CTRL_0) = params->emc_pmacro_bg_bias_ctrl0;
|
|
|
|
// Patch 1 to 3 using BCT spare secure variables.
|
|
if (params->emc_bct_spare_secure0)
|
|
*(vu32 *)params->emc_bct_spare_secure0 = params->emc_bct_spare_secure1;
|
|
if (params->emc_bct_spare_secure2)
|
|
*(vu32 *)params->emc_bct_spare_secure2 = params->emc_bct_spare_secure3;
|
|
if (params->emc_bct_spare_secure4)
|
|
*(vu32 *)params->emc_bct_spare_secure4 = params->emc_bct_spare_secure5;
|
|
|
|
EMC(EMC_TIMING_CONTROL) = 1; // Trigger timing update so above writes take place.
|
|
usleep(params->pmc_vddp_sel_wait + 2); // Ensure the regulators settle.
|
|
|
|
// Set clock sources.
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_EMC) = params->emc_clock_source;
|
|
CLOCK(CLK_RST_CONTROLLER_CLK_SOURCE_EMC_DLL) = params->emc_clock_source_dll;
|
|
|
|
// Select EMC write mux.
|
|
EMC(EMC_DBG) = (params->emc_dbg_write_mux << 1) | params->emc_dbg;
|
|
|
|
// Patch 2 using BCT spare variables.
|
|
if (params->emc_bct_spare2)
|
|
*(vu32 *)params->emc_bct_spare2 = params->emc_bct_spare3;
|
|
|
|
// This is required to do any reads from the pad macros.
|
|
EMC(EMC_CONFIG_SAMPLE_DELAY) = params->emc_config_sample_delay;
|
|
|
|
EMC(EMC_FBIO_CFG8) = params->emc_fbio_cfg8;
|
|
|
|
// Set swizzle for Rank 0.
|
|
EMC(EMC_SWIZZLE_RANK0_BYTE0) = params->emc_swizzle_rank0_byte0;
|
|
EMC(EMC_SWIZZLE_RANK0_BYTE1) = params->emc_swizzle_rank0_byte1;
|
|
EMC(EMC_SWIZZLE_RANK0_BYTE2) = params->emc_swizzle_rank0_byte2;
|
|
EMC(EMC_SWIZZLE_RANK0_BYTE3) = params->emc_swizzle_rank0_byte3;
|
|
// Set swizzle for Rank 1.
|
|
EMC(EMC_SWIZZLE_RANK1_BYTE0) = params->emc_swizzle_rank1_byte0;
|
|
EMC(EMC_SWIZZLE_RANK1_BYTE1) = params->emc_swizzle_rank1_byte1;
|
|
EMC(EMC_SWIZZLE_RANK1_BYTE2) = params->emc_swizzle_rank1_byte2;
|
|
EMC(EMC_SWIZZLE_RANK1_BYTE3) = params->emc_swizzle_rank1_byte3;
|
|
|
|
// Patch 3 using BCT spare variables.
|
|
if (params->emc_bct_spare6)
|
|
*(vu32 *)params->emc_bct_spare6 = params->emc_bct_spare7;
|
|
|
|
// Set pad controls.
|
|
EMC(EMC_XM2COMPPADCTRL) = params->emc_xm2_comp_pad_ctrl;
|
|
EMC(EMC_XM2COMPPADCTRL2) = params->emc_xm2_comp_pad_ctrl2;
|
|
EMC(EMC_XM2COMPPADCTRL3) = params->emc_xm2_comp_pad_ctrl3;
|
|
|
|
// Program Autocal controls with shadowed register fields.
|
|
EMC(EMC_AUTO_CAL_CONFIG2) = params->emc_auto_cal_config2;
|
|
EMC(EMC_AUTO_CAL_CONFIG3) = params->emc_auto_cal_config3;
|
|
EMC(EMC_AUTO_CAL_CONFIG4) = params->emc_auto_cal_config4;
|
|
EMC(EMC_AUTO_CAL_CONFIG5) = params->emc_auto_cal_config5;
|
|
EMC(EMC_AUTO_CAL_CONFIG6) = params->emc_auto_cal_config6;
|
|
EMC(EMC_AUTO_CAL_CONFIG7) = params->emc_auto_cal_config7;
|
|
EMC(EMC_AUTO_CAL_CONFIG8) = params->emc_auto_cal_config8;
|
|
|
|
EMC(EMC_PMACRO_RX_TERM) = params->emc_pmacro_rx_term;
|
|
EMC(EMC_PMACRO_DQ_TX_DRV) = params->emc_pmacro_dq_tx_drive;
|
|
EMC(EMC_PMACRO_CA_TX_DRV) = params->emc_pmacro_ca_tx_drive;
|
|
EMC(EMC_PMACRO_CMD_TX_DRV) = params->emc_pmacro_cmd_tx_drive;
|
|
EMC(EMC_PMACRO_AUTOCAL_CFG_COMMON) = params->emc_pmacro_auto_cal_common;
|
|
EMC(EMC_AUTO_CAL_CHANNEL) = params->emc_auto_cal_channel;
|
|
EMC(EMC_PMACRO_ZCTRL) = params->emc_pmacro_zcrtl;
|
|
|
|
EMC(EMC_DLL_CFG_0) = params->emc_dll_cfg0;
|
|
EMC(EMC_DLL_CFG_1) = params->emc_dll_cfg1;
|
|
EMC(EMC_CFG_DIG_DLL_1) = params->emc_cfg_dig_dll_1;
|
|
|
|
EMC(EMC_DATA_BRLSHFT_0) = params->emc_data_brlshft0;
|
|
EMC(EMC_DATA_BRLSHFT_1) = params->emc_data_brlshft1;
|
|
EMC(EMC_DQS_BRLSHFT_0) = params->emc_dqs_brlshft0;
|
|
EMC(EMC_DQS_BRLSHFT_1) = params->emc_dqs_brlshft1;
|
|
EMC(EMC_CMD_BRLSHFT_0) = params->emc_cmd_brlshft0;
|
|
EMC(EMC_CMD_BRLSHFT_1) = params->emc_cmd_brlshft1;
|
|
EMC(EMC_CMD_BRLSHFT_2) = params->emc_cmd_brlshft2;
|
|
EMC(EMC_CMD_BRLSHFT_3) = params->emc_cmd_brlshft3;
|
|
EMC(EMC_QUSE_BRLSHFT_0) = params->emc_quse_brlshft0;
|
|
EMC(EMC_QUSE_BRLSHFT_1) = params->emc_quse_brlshft1;
|
|
EMC(EMC_QUSE_BRLSHFT_2) = params->emc_quse_brlshft2;
|
|
EMC(EMC_QUSE_BRLSHFT_3) = params->emc_quse_brlshft3;
|
|
|
|
EMC(EMC_PMACRO_BRICK_CTRL_RFU1) = params->emc_pmacro_brick_ctrl_rfu1;
|
|
EMC(EMC_PMACRO_PAD_CFG_CTRL) = params->emc_pmacro_pad_cfg_ctrl;
|
|
|
|
EMC(EMC_PMACRO_CMD_BRICK_CTRL_FDPD) = params->emc_pmacro_cmd_brick_ctrl_fdpd;
|
|
EMC(EMC_PMACRO_BRICK_CTRL_RFU2) = params->emc_pmacro_brick_ctrl_rfu2;
|
|
EMC(EMC_PMACRO_DATA_BRICK_CTRL_FDPD) = params->emc_pmacro_data_brick_ctrl_fdpd;
|
|
EMC(EMC_PMACRO_DATA_PAD_RX_CTRL) = params->emc_pmacro_data_pad_rx_ctrl;
|
|
EMC(EMC_PMACRO_CMD_PAD_RX_CTRL) = params->emc_pmacro_cmd_pad_rx_ctrl;
|
|
EMC(EMC_PMACRO_DATA_PAD_TX_CTRL) = params->emc_pmacro_data_pad_tx_ctrl;
|
|
EMC(EMC_PMACRO_DATA_RX_TERM_MODE) = params->emc_pmacro_data_rx_term_mode;
|
|
EMC(EMC_PMACRO_CMD_RX_TERM_MODE) = params->emc_pmacro_cmd_rx_term_mode;
|
|
EMC(EMC_PMACRO_CMD_PAD_TX_CTRL) = params->emc_pmacro_cmd_pad_tx_ctrl & 0xEFFFFFFF;
|
|
|
|
EMC(EMC_CFG_3) = params->emc_cfg3;
|
|
EMC(EMC_PMACRO_TX_PWRD_0) = params->emc_pmacro_tx_pwrd0;
|
|
EMC(EMC_PMACRO_TX_PWRD_1) = params->emc_pmacro_tx_pwrd1;
|
|
EMC(EMC_PMACRO_TX_PWRD_2) = params->emc_pmacro_tx_pwrd2;
|
|
EMC(EMC_PMACRO_TX_PWRD_3) = params->emc_pmacro_tx_pwrd3;
|
|
EMC(EMC_PMACRO_TX_PWRD_4) = params->emc_pmacro_tx_pwrd4;
|
|
EMC(EMC_PMACRO_TX_PWRD_5) = params->emc_pmacro_tx_pwrd5;
|
|
EMC(EMC_PMACRO_TX_SEL_CLK_SRC_0) = params->emc_pmacro_tx_sel_clk_src0;
|
|
EMC(EMC_PMACRO_TX_SEL_CLK_SRC_1) = params->emc_pmacro_tx_sel_clk_src1;
|
|
EMC(EMC_PMACRO_TX_SEL_CLK_SRC_2) = params->emc_pmacro_tx_sel_clk_src2;
|
|
EMC(EMC_PMACRO_TX_SEL_CLK_SRC_3) = params->emc_pmacro_tx_sel_clk_src3;
|
|
EMC(EMC_PMACRO_TX_SEL_CLK_SRC_4) = params->emc_pmacro_tx_sel_clk_src4;
|
|
EMC(EMC_PMACRO_TX_SEL_CLK_SRC_5) = params->emc_pmacro_tx_sel_clk_src5;
|
|
|
|
// Program per bit pad macros.
|
|
EMC(EMC_PMACRO_PERBIT_FGCG_CTRL_0) = params->emc_pmacro_perbit_fgcg_ctrl0;
|
|
EMC(EMC_PMACRO_PERBIT_FGCG_CTRL_1) = params->emc_pmacro_perbit_fgcg_ctrl1;
|
|
EMC(EMC_PMACRO_PERBIT_FGCG_CTRL_2) = params->emc_pmacro_perbit_fgcg_ctrl2;
|
|
EMC(EMC_PMACRO_PERBIT_FGCG_CTRL_3) = params->emc_pmacro_perbit_fgcg_ctrl3;
|
|
EMC(EMC_PMACRO_PERBIT_FGCG_CTRL_4) = params->emc_pmacro_perbit_fgcg_ctrl4;
|
|
EMC(EMC_PMACRO_PERBIT_FGCG_CTRL_5) = params->emc_pmacro_perbit_fgcg_ctrl5;
|
|
EMC(EMC_PMACRO_PERBIT_RFU_CTRL_0) = params->emc_pmacro_perbit_rfu_ctrl0;
|
|
EMC(EMC_PMACRO_PERBIT_RFU_CTRL_1) = params->emc_pmacro_perbit_rfu_ctrl1;
|
|
EMC(EMC_PMACRO_PERBIT_RFU_CTRL_2) = params->emc_pmacro_perbit_rfu_ctrl2;
|
|
EMC(EMC_PMACRO_PERBIT_RFU_CTRL_3) = params->emc_pmacro_perbit_rfu_ctrl3;
|
|
EMC(EMC_PMACRO_PERBIT_RFU_CTRL_4) = params->emc_pmacro_perbit_rfu_ctrl4;
|
|
EMC(EMC_PMACRO_PERBIT_RFU_CTRL_5) = params->emc_pmacro_perbit_rfu_ctrl5;
|
|
EMC(EMC_PMACRO_PERBIT_RFU1_CTRL_0) = params->emc_pmacro_perbit_rfu1_ctrl0;
|
|
EMC(EMC_PMACRO_PERBIT_RFU1_CTRL_1) = params->emc_pmacro_perbit_rfu1_ctrl1;
|
|
EMC(EMC_PMACRO_PERBIT_RFU1_CTRL_2) = params->emc_pmacro_perbit_rfu1_ctrl2;
|
|
EMC(EMC_PMACRO_PERBIT_RFU1_CTRL_3) = params->emc_pmacro_perbit_rfu1_ctrl3;
|
|
EMC(EMC_PMACRO_PERBIT_RFU1_CTRL_4) = params->emc_pmacro_perbit_rfu1_ctrl4;
|
|
EMC(EMC_PMACRO_PERBIT_RFU1_CTRL_5) = params->emc_pmacro_perbit_rfu1_ctrl5;
|
|
EMC(EMC_PMACRO_DATA_PI_CTRL) = params->emc_pmacro_data_pi_ctrl;
|
|
EMC(EMC_PMACRO_CMD_PI_CTRL) = params->emc_pmacro_cmd_pi_ctrl;
|
|
|
|
EMC(EMC_PMACRO_DDLL_BYPASS) = params->emc_pmacro_ddll_bypass;
|
|
EMC(EMC_PMACRO_DDLL_PWRD_0) = params->emc_pmacro_ddll_pwrd0;
|
|
EMC(EMC_PMACRO_DDLL_PWRD_1) = params->emc_pmacro_ddll_pwrd1;
|
|
EMC(EMC_PMACRO_DDLL_PWRD_2) = params->emc_pmacro_ddll_pwrd2;
|
|
EMC(EMC_PMACRO_CMD_CTRL_0) = params->emc_pmacro_cmd_ctrl0;
|
|
EMC(EMC_PMACRO_CMD_CTRL_1) = params->emc_pmacro_cmd_ctrl1;
|
|
EMC(EMC_PMACRO_CMD_CTRL_2) = params->emc_pmacro_cmd_ctrl2;
|
|
EMC(EMC_PMACRO_IB_VREF_DQ_0) = params->emc_pmacro_ib_vref_dq_0;
|
|
EMC(EMC_PMACRO_IB_VREF_DQ_1) = params->emc_pmacro_ib_vref_dq_1;
|
|
EMC(EMC_PMACRO_IB_VREF_DQS_0) = params->emc_pmacro_ib_vref_dqs_0;
|
|
EMC(EMC_PMACRO_IB_VREF_DQS_1) = params->emc_pmacro_ib_vref_dqs_1;
|
|
EMC(EMC_PMACRO_IB_RXRT) = params->emc_pmacro_ib_rxrt;
|
|
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK0_0) = params->emc_pmacro_quse_ddll_rank0_0;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK0_1) = params->emc_pmacro_quse_ddll_rank0_1;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK0_2) = params->emc_pmacro_quse_ddll_rank0_2;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK0_3) = params->emc_pmacro_quse_ddll_rank0_3;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK0_4) = params->emc_pmacro_quse_ddll_rank0_4;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK0_5) = params->emc_pmacro_quse_ddll_rank0_5;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK1_0) = params->emc_pmacro_quse_ddll_rank1_0;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK1_1) = params->emc_pmacro_quse_ddll_rank1_1;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK1_2) = params->emc_pmacro_quse_ddll_rank1_2;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK1_3) = params->emc_pmacro_quse_ddll_rank1_3;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK1_4) = params->emc_pmacro_quse_ddll_rank1_4;
|
|
EMC(EMC_PMACRO_QUSE_DDLL_RANK1_5) = params->emc_pmacro_quse_ddll_rank1_5;
|
|
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_0) = params->emc_pmacro_ob_ddll_long_dq_rank0_0;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_1) = params->emc_pmacro_ob_ddll_long_dq_rank0_1;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_2) = params->emc_pmacro_ob_ddll_long_dq_rank0_2;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_3) = params->emc_pmacro_ob_ddll_long_dq_rank0_3;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_4) = params->emc_pmacro_ob_ddll_long_dq_rank0_4;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK0_5) = params->emc_pmacro_ob_ddll_long_dq_rank0_5;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_0) = params->emc_pmacro_ob_ddll_long_dq_rank1_0;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_1) = params->emc_pmacro_ob_ddll_long_dq_rank1_1;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_2) = params->emc_pmacro_ob_ddll_long_dq_rank1_2;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_3) = params->emc_pmacro_ob_ddll_long_dq_rank1_3;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_4) = params->emc_pmacro_ob_ddll_long_dq_rank1_4;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQ_RANK1_5) = params->emc_pmacro_ob_ddll_long_dq_rank1_5;
|
|
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_0) = params->emc_pmacro_ob_ddll_long_dqs_rank0_0;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_1) = params->emc_pmacro_ob_ddll_long_dqs_rank0_1;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_2) = params->emc_pmacro_ob_ddll_long_dqs_rank0_2;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_3) = params->emc_pmacro_ob_ddll_long_dqs_rank0_3;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_4) = params->emc_pmacro_ob_ddll_long_dqs_rank0_4;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK0_5) = params->emc_pmacro_ob_ddll_long_dqs_rank0_5;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_0) = params->emc_pmacro_ob_ddll_long_dqs_rank1_0;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_1) = params->emc_pmacro_ob_ddll_long_dqs_rank1_1;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_2) = params->emc_pmacro_ob_ddll_long_dqs_rank1_2;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_3) = params->emc_pmacro_ob_ddll_long_dqs_rank1_3;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_4) = params->emc_pmacro_ob_ddll_long_dqs_rank1_4;
|
|
EMC(EMC_PMACRO_OB_DDLL_LONG_DQS_RANK1_5) = params->emc_pmacro_ob_ddll_long_dqs_rank1_5;
|
|
EMC(EMC_PMACRO_IB_DDLL_LONG_DQS_RANK0_0) = params->emc_pmacro_ib_ddll_long_dqs_rank0_0;
|
|
EMC(EMC_PMACRO_IB_DDLL_LONG_DQS_RANK0_1) = params->emc_pmacro_ib_ddll_long_dqs_rank0_1;
|
|
EMC(EMC_PMACRO_IB_DDLL_LONG_DQS_RANK0_2) = params->emc_pmacro_ib_ddll_long_dqs_rank0_2;
|
|
EMC(EMC_PMACRO_IB_DDLL_LONG_DQS_RANK0_3) = params->emc_pmacro_ib_ddll_long_dqs_rank0_3;
|
|
EMC(EMC_PMACRO_IB_DDLL_LONG_DQS_RANK1_0) = params->emc_pmacro_ib_ddll_long_dqs_rank1_0;
|
|
EMC(EMC_PMACRO_IB_DDLL_LONG_DQS_RANK1_1) = params->emc_pmacro_ib_ddll_long_dqs_rank1_1;
|
|
EMC(EMC_PMACRO_IB_DDLL_LONG_DQS_RANK1_2) = params->emc_pmacro_ib_ddll_long_dqs_rank1_2;
|
|
EMC(EMC_PMACRO_IB_DDLL_LONG_DQS_RANK1_3) = params->emc_pmacro_ib_ddll_long_dqs_rank1_3;
|
|
|
|
EMC(EMC_PMACRO_DDLL_LONG_CMD_0) = params->emc_pmacro_ddll_long_cmd_0;
|
|
EMC(EMC_PMACRO_DDLL_LONG_CMD_1) = params->emc_pmacro_ddll_long_cmd_1;
|
|
EMC(EMC_PMACRO_DDLL_LONG_CMD_2) = params->emc_pmacro_ddll_long_cmd_2;
|
|
EMC(EMC_PMACRO_DDLL_LONG_CMD_3) = params->emc_pmacro_ddll_long_cmd_3;
|
|
EMC(EMC_PMACRO_DDLL_LONG_CMD_4) = params->emc_pmacro_ddll_long_cmd_4;
|
|
EMC(EMC_PMACRO_DDLL_SHORT_CMD_0) = params->emc_pmacro_ddll_short_cmd_0;
|
|
EMC(EMC_PMACRO_DDLL_SHORT_CMD_1) = params->emc_pmacro_ddll_short_cmd_1;
|
|
EMC(EMC_PMACRO_DDLL_SHORT_CMD_2) = params->emc_pmacro_ddll_short_cmd_2;
|
|
|
|
// Set DLL periodic offset.
|
|
EMC(EMC_PMACRO_DDLL_PERIODIC_OFFSET) = params->emc_pmacro_ddll_periodic_offset;
|
|
|
|
// Patch 4 using BCT spare variables.
|
|
if (params->emc_bct_spare4)
|
|
*(vu32 *)params->emc_bct_spare4 = params->emc_bct_spare5;
|
|
|
|
// Patch 4 to 6 using BCT spare secure variables.
|
|
if (params->emc_bct_spare_secure6)
|
|
*(vu32 *)params->emc_bct_spare_secure6 = params->emc_bct_spare_secure7;
|
|
if (params->emc_bct_spare_secure8)
|
|
*(vu32 *)params->emc_bct_spare_secure8 = params->emc_bct_spare_secure9;
|
|
if (params->emc_bct_spare_secure10)
|
|
*(vu32 *)params->emc_bct_spare_secure10 = params->emc_bct_spare_secure11;
|
|
|
|
EMC(EMC_TIMING_CONTROL) = 1; // Trigger timing update so above writes take place.
|
|
|
|
// Initialize MC VPR settings.
|
|
MC(MC_VIDEO_PROTECT_BOM) = params->mc_video_protect_bom;
|
|
MC(MC_VIDEO_PROTECT_BOM_ADR_HI) = params->mc_video_protect_bom_adr_hi;
|
|
MC(MC_VIDEO_PROTECT_SIZE_MB) = params->mc_video_protect_size_mb;
|
|
MC(MC_VIDEO_PROTECT_VPR_OVERRIDE) = params->mc_video_protect_vpr_override;
|
|
MC(MC_VIDEO_PROTECT_VPR_OVERRIDE1) = params->mc_video_protect_vpr_override1;
|
|
MC(MC_VIDEO_PROTECT_GPU_OVERRIDE_0) = params->mc_video_protect_gpu_override0;
|
|
MC(MC_VIDEO_PROTECT_GPU_OVERRIDE_1) = params->mc_video_protect_gpu_override1;
|
|
|
|
// Program SDRAM geometry parameters.
|
|
MC(MC_EMEM_ADR_CFG) = params->mc_emem_adr_cfg;
|
|
MC(MC_EMEM_ADR_CFG_DEV0) = params->mc_emem_adr_cfg_dev0;
|
|
MC(MC_EMEM_ADR_CFG_DEV1) = params->mc_emem_adr_cfg_dev1;
|
|
MC(MC_EMEM_ADR_CFG_CHANNEL_MASK) = params->mc_emem_adr_cfg_channel_mask;
|
|
|
|
// Program bank swizzling.
|
|
MC(MC_EMEM_ADR_CFG_BANK_MASK_0) = params->mc_emem_adr_cfg_bank_mask0;
|
|
MC(MC_EMEM_ADR_CFG_BANK_MASK_1) = params->mc_emem_adr_cfg_bank_mask1;
|
|
MC(MC_EMEM_ADR_CFG_BANK_MASK_2) = params->mc_emem_adr_cfg_bank_mask2;
|
|
|
|
// Program external memory aperture (base and size).
|
|
MC(MC_EMEM_CFG) = params->mc_emem_cfg;
|
|
|
|
// Program SEC carveout (base and size).
|
|
MC(MC_SEC_CARVEOUT_BOM) = params->mc_sec_carveout_bom;
|
|
MC(MC_SEC_CARVEOUT_ADR_HI) = params->mc_sec_carveout_adr_hi;
|
|
MC(MC_SEC_CARVEOUT_SIZE_MB) = params->mc_sec_carveout_size_mb;
|
|
|
|
// Program MTS carveout (base and size).
|
|
MC(MC_MTS_CARVEOUT_BOM) = params->mc_mts_carveout_bom;
|
|
MC(MC_MTS_CARVEOUT_ADR_HI) = params->mc_mts_carveout_adr_hi;
|
|
MC(MC_MTS_CARVEOUT_SIZE_MB) = params->mc_mts_carveout_size_mb;
|
|
|
|
// Program the memory arbiter.
|
|
MC(MC_EMEM_ARB_CFG) = params->mc_emem_arb_cfg;
|
|
MC(MC_EMEM_ARB_OUTSTANDING_REQ) = params->mc_emem_arb_outstanding_req;
|
|
MC(MC_EMEM_ARB_REFPB_HP_CTRL) = params->emc_emem_arb_refpb_hp_ctrl;
|
|
MC(MC_EMEM_ARB_REFPB_BANK_CTRL) = params->emc_emem_arb_refpb_bank_ctrl;
|
|
MC(MC_EMEM_ARB_TIMING_RCD) = params->mc_emem_arb_timing_rcd;
|
|
MC(MC_EMEM_ARB_TIMING_RP) = params->mc_emem_arb_timing_rp;
|
|
MC(MC_EMEM_ARB_TIMING_RC) = params->mc_emem_arb_timing_rc;
|
|
MC(MC_EMEM_ARB_TIMING_RAS) = params->mc_emem_arb_timing_ras;
|
|
MC(MC_EMEM_ARB_TIMING_FAW) = params->mc_emem_arb_timing_faw;
|
|
MC(MC_EMEM_ARB_TIMING_RRD) = params->mc_emem_arb_timing_rrd;
|
|
MC(MC_EMEM_ARB_TIMING_RAP2PRE) = params->mc_emem_arb_timing_rap2pre;
|
|
MC(MC_EMEM_ARB_TIMING_WAP2PRE) = params->mc_emem_arb_timing_wap2pre;
|
|
MC(MC_EMEM_ARB_TIMING_R2R) = params->mc_emem_arb_timing_r2r;
|
|
MC(MC_EMEM_ARB_TIMING_W2W) = params->mc_emem_arb_timing_w2w;
|
|
MC(MC_EMEM_ARB_TIMING_CCDMW) = params->mc_emem_arb_timing_ccdmw;
|
|
MC(MC_EMEM_ARB_TIMING_R2W) = params->mc_emem_arb_timing_r2w;
|
|
MC(MC_EMEM_ARB_TIMING_W2R) = params->mc_emem_arb_timing_w2r;
|
|
MC(MC_EMEM_ARB_TIMING_RFCPB) = params->mc_emem_arb_timing_rfcpb;
|
|
MC(MC_EMEM_ARB_DA_TURNS) = params->mc_emem_arb_da_turns;
|
|
MC(MC_EMEM_ARB_DA_COVERS) = params->mc_emem_arb_da_covers;
|
|
MC(MC_EMEM_ARB_MISC0) = params->mc_emem_arb_misc0;
|
|
MC(MC_EMEM_ARB_MISC1) = params->mc_emem_arb_misc1;
|
|
MC(MC_EMEM_ARB_MISC2) = params->mc_emem_arb_misc2;
|
|
MC(MC_EMEM_ARB_RING1_THROTTLE) = params->mc_emem_arb_ring1_throttle;
|
|
MC(MC_EMEM_ARB_OVERRIDE) = params->mc_emem_arb_override;
|
|
MC(MC_EMEM_ARB_OVERRIDE_1) = params->mc_emem_arb_override1;
|
|
MC(MC_EMEM_ARB_RSV) = params->mc_emem_arb_rsv;
|
|
MC(MC_DA_CONFIG0) = params->mc_da_cfg0;
|
|
|
|
MC(MC_TIMING_CONTROL) = 1; // Trigger MC timing update.
|
|
|
|
// Program second-level clock enable overrides.
|
|
MC(MC_CLKEN_OVERRIDE) = params->mc_clken_override;
|
|
|
|
// Program statistics gathering.
|
|
MC(MC_STAT_CONTROL) = params->mc_stat_control;
|
|
|
|
// Program SDRAM geometry parameters.
|
|
EMC(EMC_ADR_CFG) = params->emc_adr_cfg;
|
|
|
|
// Program second-level clock enable overrides.
|
|
EMC(EMC_CLKEN_OVERRIDE) = params->emc_clken_override;
|
|
|
|
// Program EMC pad auto calibration.
|
|
EMC(EMC_PMACRO_AUTOCAL_CFG_0) = params->emc_pmacro_auto_cal_cfg0;
|
|
EMC(EMC_PMACRO_AUTOCAL_CFG_1) = params->emc_pmacro_auto_cal_cfg1;
|
|
EMC(EMC_PMACRO_AUTOCAL_CFG_2) = params->emc_pmacro_auto_cal_cfg2;
|
|
|
|
EMC(EMC_AUTO_CAL_VREF_SEL_0) = params->emc_auto_cal_vref_sel0;
|
|
EMC(EMC_AUTO_CAL_VREF_SEL_1) = params->emc_auto_cal_vref_sel1;
|
|
|
|
EMC(EMC_AUTO_CAL_INTERVAL) = params->emc_auto_cal_interval;
|
|
EMC(EMC_AUTO_CAL_CONFIG) = params->emc_auto_cal_config;
|
|
usleep(params->emc_auto_cal_wait);
|
|
|
|
// Patch 5 using BCT spare variables.
|
|
if (params->emc_bct_spare8)
|
|
*(vu32 *)params->emc_bct_spare8 = params->emc_bct_spare9;
|
|
|
|
EMC(EMC_AUTO_CAL_CONFIG9) = params->emc_auto_cal_config9;
|
|
|
|
// Program EMC timing configuration.
|
|
EMC(EMC_CFG_2) = params->emc_cfg2;
|
|
EMC(EMC_CFG_PIPE) = params->emc_cfg_pipe;
|
|
EMC(EMC_CFG_PIPE_1) = params->emc_cfg_pipe1;
|
|
EMC(EMC_CFG_PIPE_2) = params->emc_cfg_pipe2;
|
|
EMC(EMC_CMDQ) = params->emc_cmd_q;
|
|
EMC(EMC_MC2EMCQ) = params->emc_mc2emc_q;
|
|
EMC(EMC_MRS_WAIT_CNT) = params->emc_mrs_wait_cnt;
|
|
EMC(EMC_MRS_WAIT_CNT2) = params->emc_mrs_wait_cnt2;
|
|
EMC(EMC_FBIO_CFG5) = params->emc_fbio_cfg5;
|
|
EMC(EMC_RC) = params->emc_rc;
|
|
EMC(EMC_RFC) = params->emc_rfc;
|
|
EMC(EMC_RFCPB) = params->emc_rfc_pb;
|
|
EMC(EMC_REFCTRL2) = params->emc_ref_ctrl2;
|
|
EMC(EMC_RFC_SLR) = params->emc_rfc_slr;
|
|
EMC(EMC_RAS) = params->emc_ras;
|
|
EMC(EMC_RP) = params->emc_rp;
|
|
EMC(EMC_TPPD) = params->emc_tppd;
|
|
EMC(EMC_CTT) = params->emc_trtm;
|
|
EMC(EMC_FBIO_TWTM) = params->emc_twtm;
|
|
EMC(EMC_FBIO_TRATM) = params->emc_tratm;
|
|
EMC(EMC_FBIO_TWATM) = params->emc_twatm;
|
|
EMC(EMC_FBIO_TR2REF) = params->emc_tr2ref;
|
|
EMC(EMC_R2R) = params->emc_r2r;
|
|
EMC(EMC_W2W) = params->emc_w2w;
|
|
EMC(EMC_R2W) = params->emc_r2w;
|
|
EMC(EMC_W2R) = params->emc_w2r;
|
|
EMC(EMC_R2P) = params->emc_r2p;
|
|
EMC(EMC_W2P) = params->emc_w2p;
|
|
EMC(EMC_CCDMW) = params->emc_ccdmw;
|
|
EMC(EMC_RD_RCD) = params->emc_rd_rcd;
|
|
EMC(EMC_WR_RCD) = params->emc_wr_rcd;
|
|
EMC(EMC_RRD) = params->emc_rrd;
|
|
EMC(EMC_REXT) = params->emc_rext;
|
|
EMC(EMC_WEXT) = params->emc_wext;
|
|
EMC(EMC_WDV) = params->emc_wdv;
|
|
EMC(EMC_WDV_CHK) = params->emc_wdv_chk;
|
|
EMC(EMC_WSV) = params->emc_wsv;
|
|
EMC(EMC_WEV) = params->emc_wev;
|
|
EMC(EMC_WDV_MASK) = params->emc_wdv_mask;
|
|
EMC(EMC_WS_DURATION) = params->emc_ws_duration;
|
|
EMC(EMC_WE_DURATION) = params->emc_we_duration;
|
|
EMC(EMC_QUSE) = params->emc_quse;
|
|
EMC(EMC_QUSE_WIDTH) = params->emc_quse_width;
|
|
EMC(EMC_IBDLY) = params->emc_ibdly;
|
|
EMC(EMC_OBDLY) = params->emc_obdly;
|
|
EMC(EMC_EINPUT) = params->emc_einput;
|
|
EMC(EMC_EINPUT_DURATION) = params->emc_einput_duration;
|
|
EMC(EMC_PUTERM_EXTRA) = params->emc_puterm_extra;
|
|
EMC(EMC_PUTERM_WIDTH) = params->emc_puterm_width;
|
|
EMC(EMC_DBG) = params->emc_dbg;
|
|
EMC(EMC_QRST) = params->emc_qrst;
|
|
EMC(EMC_ISSUE_QRST) = 1;
|
|
EMC(EMC_ISSUE_QRST) = 0;
|
|
EMC(EMC_QSAFE) = params->emc_qsafe;
|
|
EMC(EMC_RDV) = params->emc_rdv;
|
|
EMC(EMC_RDV_MASK) = params->emc_rdv_mask;
|
|
EMC(EMC_RDV_EARLY) = params->emc_rdv_early;
|
|
EMC(EMC_RDV_EARLY_MASK) = params->emc_rdv_early_mask;
|
|
EMC(EMC_QPOP) = params->emc_qpop;
|
|
EMC(EMC_REFRESH) = params->emc_refresh;
|
|
EMC(EMC_BURST_REFRESH_NUM) = params->emc_burst_refresh_num;
|
|
EMC(EMC_PRE_REFRESH_REQ_CNT) = params->emc_prerefresh_req_cnt;
|
|
EMC(EMC_PDEX2WR) = params->emc_pdex2wr;
|
|
EMC(EMC_PDEX2RD) = params->emc_pdex2rd;
|
|
EMC(EMC_PCHG2PDEN) = params->emc_pchg2pden;
|
|
EMC(EMC_ACT2PDEN) = params->emc_act2pden;
|
|
EMC(EMC_AR2PDEN) = params->emc_ar2pden;
|
|
EMC(EMC_RW2PDEN) = params->emc_rw2pden;
|
|
EMC(EMC_CKE2PDEN) = params->emc_cke2pden;
|
|
EMC(EMC_PDEX2CKE) = params->emc_pdex2che;
|
|
EMC(EMC_PDEX2MRR) = params->emc_pdex2mrr;
|
|
EMC(EMC_TXSR) = params->emc_txsr;
|
|
EMC(EMC_TXSRDLL) = params->emc_txsr_dll;
|
|
EMC(EMC_TCKE) = params->emc_tcke;
|
|
EMC(EMC_TCKESR) = params->emc_tckesr;
|
|
EMC(EMC_TPD) = params->emc_tpd;
|
|
EMC(EMC_TFAW) = params->emc_tfaw;
|
|
EMC(EMC_TRPAB) = params->emc_trpab;
|
|
EMC(EMC_TCLKSTABLE) = params->emc_tclkstable;
|
|
EMC(EMC_TCLKSTOP) = params->emc_tclkstop;
|
|
EMC(EMC_TREFBW) = params->emc_trefbw;
|
|
EMC(EMC_ODT_WRITE) = params->emc_odt_write;
|
|
EMC(EMC_CFG_DIG_DLL) = params->emc_cfg_dig_dll;
|
|
EMC(EMC_CFG_DIG_DLL_PERIOD) = params->emc_cfg_dig_dll_period;
|
|
|
|
// Don't write CFG_ADR_EN (bit 1) here - lock bit written later.
|
|
EMC(EMC_FBIO_SPARE) = params->emc_fbio_spare & 0xFFFFFFFD;
|
|
EMC(EMC_CFG_RSV) = params->emc_cfg_rsv;
|
|
EMC(EMC_PMC_SCRATCH1) = params->emc_pmc_scratch1;
|
|
EMC(EMC_PMC_SCRATCH2) = params->emc_pmc_scratch2;
|
|
EMC(EMC_PMC_SCRATCH3) = params->emc_pmc_scratch3;
|
|
EMC(EMC_ACPD_CONTROL) = params->emc_acpd_control;
|
|
EMC(EMC_TXDSRVTTGEN) = params->emc_txdsrvttgen;
|
|
EMC(EMC_PMACRO_DSR_VTTGEN_CTRL0) = params->emc_pmacro_dsr_vttgen_ctrl0;
|
|
|
|
// Set pipe bypass enable bits before sending any DRAM commands.
|
|
EMC(EMC_CFG) = (params->emc_cfg & 0xE) | 0x3C00000;
|
|
|
|
// BootROM patching is used as a generic patch here.
|
|
if (params->boot_rom_patch_control)
|
|
{
|
|
*(vu32 *)params->boot_rom_patch_control = params->boot_rom_patch_data;
|
|
MC(MC_TIMING_CONTROL) = 1; // Trigger MC timing update.
|
|
}
|
|
|
|
// Patch 7 to 9 using BCT spare secure variables.
|
|
if (params->emc_bct_spare_secure12)
|
|
*(vu32 *)params->emc_bct_spare_secure12 = params->emc_bct_spare_secure13;
|
|
if (params->emc_bct_spare_secure14)
|
|
*(vu32 *)params->emc_bct_spare_secure14 = params->emc_bct_spare_secure15;
|
|
if (params->emc_bct_spare_secure16)
|
|
*(vu32 *)params->emc_bct_spare_secure16 = params->emc_bct_spare_secure17;
|
|
|
|
// Release SEL_DPD_CMD.
|
|
PMC(APBDEV_PMC_IO_DPD3_REQ) = ((params->emc_pmc_scratch1 & 0x3FFFFFFF) | 0x40000000) & 0xCFFF0000;
|
|
usleep(params->pmc_io_dpd3_req_wait);
|
|
|
|
// Set transmission pad control parameters.
|
|
EMC(EMC_PMACRO_CMD_PAD_TX_CTRL) = params->emc_pmacro_cmd_pad_tx_ctrl;
|
|
|
|
// ZQ CAL setup (not actually issuing ZQ CAL now).
|
|
if (params->emc_zcal_warm_cold_boot_enables & 1)
|
|
{
|
|
if (params->memory_type == MEMORY_TYPE_DDR3L)
|
|
EMC(EMC_ZCAL_WAIT_CNT) = params->emc_zcal_wait_cnt << 3;
|
|
if (params->memory_type == MEMORY_TYPE_LPDDR4)
|
|
{
|
|
EMC(EMC_ZCAL_WAIT_CNT) = params->emc_zcal_wait_cnt;
|
|
EMC(EMC_ZCAL_MRW_CMD) = params->emc_zcal_mrw_cmd;
|
|
}
|
|
}
|
|
|
|
EMC(EMC_TIMING_CONTROL) = 1; // Trigger timing update so above writes take place.
|
|
usleep(params->emc_timing_control_wait);
|
|
|
|
// Deassert HOLD_CKE_LOW.
|
|
PMC(APBDEV_PMC_DDR_CNTRL) &= 0xFF78007F;
|
|
usleep(params->pmc_ddr_ctrl_wait);
|
|
|
|
// Set clock enable signal.
|
|
u32 pin_gpio_cfg = (params->emc_pin_gpio_enable << 16) | (params->emc_pin_gpio << 12);
|
|
if (params->memory_type == MEMORY_TYPE_DDR3L || params->memory_type == MEMORY_TYPE_LPDDR4)
|
|
{
|
|
EMC(EMC_PIN) = pin_gpio_cfg;
|
|
(void)EMC(EMC_PIN);
|
|
usleep(params->emc_pin_extra_wait + 200);
|
|
EMC(EMC_PIN) = pin_gpio_cfg | 0x100;
|
|
(void)EMC(EMC_PIN);
|
|
}
|
|
|
|
if (params->memory_type == MEMORY_TYPE_LPDDR4)
|
|
usleep(params->emc_pin_extra_wait + 2000);
|
|
else if (params->memory_type == MEMORY_TYPE_DDR3L)
|
|
usleep(params->emc_pin_extra_wait + 500);
|
|
|
|
// Enable clock enable signal.
|
|
EMC(EMC_PIN) = pin_gpio_cfg | 0x101;
|
|
(void)EMC(EMC_PIN);
|
|
usleep(params->emc_pin_program_wait);
|
|
|
|
// Send NOP (trigger just needs to be non-zero).
|
|
if (params->memory_type != MEMORY_TYPE_LPDDR4)
|
|
EMC(EMC_NOP) = (params->emc_dev_select << 30) + 1;
|
|
|
|
// On coldboot w/LPDDR2/3, wait 200 uSec after asserting CKE high.
|
|
if (params->memory_type == MEMORY_TYPE_LPDDR2)
|
|
usleep(params->emc_pin_extra_wait + 200);
|
|
|
|
// Init zq calibration,
|
|
if (params->memory_type == MEMORY_TYPE_LPDDR4)
|
|
{
|
|
// Patch 6 using BCT spare variables.
|
|
if (params->emc_bct_spare10)
|
|
*(vu32 *)params->emc_bct_spare10 = params->emc_bct_spare11;
|
|
|
|
// Write mode registers.
|
|
EMC(EMC_MRW2) = params->emc_mrw2;
|
|
EMC(EMC_MRW) = params->emc_mrw1;
|
|
EMC(EMC_MRW3) = params->emc_mrw3;
|
|
EMC(EMC_MRW4) = params->emc_mrw4;
|
|
EMC(EMC_MRW6) = params->emc_mrw6;
|
|
EMC(EMC_MRW14) = params->emc_mrw14;
|
|
|
|
EMC(EMC_MRW8) = params->emc_mrw8;
|
|
EMC(EMC_MRW12) = params->emc_mrw12;
|
|
EMC(EMC_MRW9) = params->emc_mrw9;
|
|
EMC(EMC_MRW13) = params->emc_mrw13;
|
|
|
|
if (params->emc_zcal_warm_cold_boot_enables & 1)
|
|
{
|
|
// Issue ZQCAL start, device 0.
|
|
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev0;
|
|
usleep(params->emc_zcal_init_wait);
|
|
|
|
// Issue ZQCAL latch.
|
|
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev0 ^ 3;
|
|
// Same for device 1.
|
|
if (!(params->emc_dev_select & 2))
|
|
{
|
|
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev1;
|
|
usleep(params->emc_zcal_init_wait);
|
|
EMC(EMC_ZQ_CAL) = params->emc_zcal_init_dev1 ^ 3;
|
|
}
|
|
}
|
|
}
|
|
|
|
// Patch 10 to 12 using BCT spare secure variables.
|
|
if (params->emc_bct_spare_secure18)
|
|
*(vu32 *)params->emc_bct_spare_secure18 = params->emc_bct_spare_secure19;
|
|
if (params->emc_bct_spare_secure20)
|
|
*(vu32 *)params->emc_bct_spare_secure20 = params->emc_bct_spare_secure21;
|
|
if (params->emc_bct_spare_secure22)
|
|
*(vu32 *)params->emc_bct_spare_secure22 = params->emc_bct_spare_secure23;
|
|
|
|
// Set package and DPD pad control.
|
|
PMC(APBDEV_PMC_DDR_CFG) = params->pmc_ddr_cfg;
|
|
|
|
// Start periodic ZQ calibration (LPDDRx only).
|
|
if (params->memory_type == MEMORY_TYPE_LPDDR2 || params->memory_type == MEMORY_TYPE_DDR3L || params->memory_type == MEMORY_TYPE_LPDDR4)
|
|
{
|
|
EMC(EMC_ZCAL_INTERVAL) = params->emc_zcal_interval;
|
|
EMC(EMC_ZCAL_WAIT_CNT) = params->emc_zcal_wait_cnt;
|
|
EMC(EMC_ZCAL_MRW_CMD) = params->emc_zcal_mrw_cmd;
|
|
}
|
|
|
|
// Patch 7 using BCT spare variables.
|
|
if (params->emc_bct_spare12)
|
|
*(vu32 *)params->emc_bct_spare12 = params->emc_bct_spare13;
|
|
|
|
EMC(EMC_TIMING_CONTROL) = 1; // Trigger timing update so above writes take place.
|
|
|
|
if (params->emc_extra_refresh_num)
|
|
EMC(EMC_REF) = ((1 << params->emc_extra_refresh_num << 8) - 253) | (params->emc_dev_select << 30);
|
|
|
|
// Enable refresh.
|
|
EMC(EMC_REFCTRL) = params->emc_dev_select | 0x80000000;
|
|
|
|
EMC(EMC_DYN_SELF_REF_CONTROL) = params->emc_dyn_self_ref_control;
|
|
EMC(EMC_CFG) = params->emc_cfg;
|
|
EMC(EMC_FDPD_CTRL_DQ) = params->emc_fdpd_ctrl_dq;
|
|
EMC(EMC_FDPD_CTRL_CMD) = params->emc_fdpd_ctrl_cmd;
|
|
EMC(EMC_SEL_DPD_CTRL) = params->emc_sel_dpd_ctrl;
|
|
|
|
// Write addr swizzle lock bit.
|
|
EMC(EMC_FBIO_SPARE) = params->emc_fbio_spare | 2;
|
|
|
|
EMC(EMC_TIMING_CONTROL) = 1; // Re-trigger timing to latch power saving functions.
|
|
|
|
EMC(EMC_CFG_UPDATE) = params->emc_cfg_update;
|
|
|
|
// Enable EMC pipe clock gating.
|
|
EMC(EMC_CFG_PIPE_CLK) = params->emc_cfg_pipe_clk;
|
|
|
|
// Depending on freqency, enable CMD/CLK fdpd.
|
|
EMC(EMC_FDPD_CTRL_CMD_NO_RAMP) = params->emc_fdpd_ctrl_cmd_no_ramp;
|
|
|
|
// Set untranslated region requirements.
|
|
MC(MC_UNTRANSLATED_REGION_CHECK) = params->mc_untranslated_region_check;
|
|
|
|
// Lock carveouts per BCT cfg.
|
|
MC(MC_VIDEO_PROTECT_REG_CTRL) = params->mc_video_protect_write_access;
|
|
MC(MC_SEC_CARVEOUT_REG_CTRL) = params->mc_sec_carveout_protect_write_access;
|
|
MC(MC_MTS_CARVEOUT_REG_CTRL) = params->mc_mts_carveout_reg_ctrl;
|
|
|
|
// Disable write access to a bunch of EMC registers.
|
|
MC(MC_EMEM_CFG_ACCESS_CTRL) = 1;
|
|
|
|
// Enable arbiter.
|
|
SYSREG(AHB_ARBITRATION_XBAR_CTRL) = (SYSREG(AHB_ARBITRATION_XBAR_CTRL) & 0xFFFEFFFF) | (params->ahb_arbitration_xbar_ctrl_meminit_done << 16);
|
|
}
|
|
|
|
#ifndef CONFIG_SDRAM_COMPRESS_CFG
|
|
static void _sdram_patch_model_params_t210(u32 dramid, u32 *params)
|
|
{
|
|
for (u32 i = 0; i < ARRAY_SIZE(sdram_cfg_vendor_patches_t210); i++)
|
|
if (sdram_cfg_vendor_patches_t210[i].dramid & DRAM_ID(dramid))
|
|
params[sdram_cfg_vendor_patches_t210[i].addr] = sdram_cfg_vendor_patches_t210[i].val;
|
|
}
|
|
#endif
|
|
|
|
static void _sdram_patch_model_params_t210b01(u32 dramid, u32 *params)
|
|
{
|
|
for (u32 i = 0; i < ARRAY_SIZE(sdram_cfg_vendor_patches_t210b01); i++)
|
|
if (sdram_cfg_vendor_patches_t210b01[i].dramid & DRAM_ID2(dramid))
|
|
params[sdram_cfg_vendor_patches_t210b01[i].addr] = sdram_cfg_vendor_patches_t210b01[i].val;
|
|
}
|
|
|
|
static void *_sdram_get_params_t210()
|
|
{
|
|
// Check if id is proper.
|
|
u32 dramid = _sdram_get_id();
|
|
if (dramid > 6)
|
|
dramid = 0;
|
|
|
|
#ifdef CONFIG_SDRAM_COMPRESS_CFG
|
|
|
|
u8 *buf = (u8 *)SDRAM_PARAMS_ADDR;
|
|
LZ_Uncompress(_dram_cfg_lz, buf, sizeof(_dram_cfg_lz));
|
|
return (void *)&buf[sizeof(sdram_params_t210_t) * dramid];
|
|
|
|
#else
|
|
|
|
u32 *buf = (u32 *)SDRAM_PARAMS_ADDR;
|
|
memcpy(buf, &_dram_cfg_0_samsung_4gb, sizeof(sdram_params_t210_t));
|
|
|
|
switch (dramid)
|
|
{
|
|
case LPDDR4_ICOSA_4GB_SAMSUNG_K4F6E304HB_MGCH:
|
|
case LPDDR4_ICOSA_4GB_MICRON_MT53B512M32D2NP_062_WT:
|
|
break;
|
|
|
|
case LPDDR4_ICOSA_4GB_HYNIX_H9HCNNNBPUMLHR_NLE:
|
|
case LPDDR4_ICOSA_6GB_SAMSUNG_K4FHE3D4HM_MGCH:
|
|
#ifdef CONFIG_SDRAM_COPPER_SUPPORT
|
|
case LPDDR4_COPPER_4GB_SAMSUNG_K4F6E304HB_MGCH:
|
|
case LPDDR4_COPPER_4GB_HYNIX_H9HCNNNBPUMLHR_NLE:
|
|
case LPDDR4_COPPER_4GB_MICRON_MT53B512M32D2NP_062_WT:
|
|
#endif
|
|
_sdram_patch_model_params_t210(dramid, (u32 *)buf);
|
|
break;
|
|
}
|
|
return (void *)buf;
|
|
|
|
#endif
|
|
}
|
|
|
|
void *sdram_get_params_t210b01()
|
|
{
|
|
// Check if id is proper.
|
|
u32 dramid = _sdram_get_id();
|
|
if (dramid > 27)
|
|
dramid = 8;
|
|
|
|
u32 *buf = (u32 *)SDRAM_PARAMS_ADDR;
|
|
memcpy(buf, &_dram_cfg_08_10_12_14_samsung_hynix_4gb, sizeof(sdram_params_t210b01_t));
|
|
|
|
switch (dramid)
|
|
{
|
|
case LPDDR4X_IOWA_4GB_SAMSUNG_K4U6E3S4AM_MGCJ:
|
|
case LPDDR4X_IOWA_4GB_HYNIX_H9HCNNNBKMMLHR_NME:
|
|
case LPDDR4X_HOAG_4GB_SAMSUNG_K4U6E3S4AM_MGCJ:
|
|
case LPDDR4X_HOAG_4GB_HYNIX_H9HCNNNBKMMLHR_NME:
|
|
break;
|
|
|
|
case LPDDR4X_IOWA_4GB_SAMSUNG_X1X2:
|
|
case LPDDR4X_IOWA_8GB_SAMSUNG_K4UBE3D4AM_MGCJ:
|
|
case LPDDR4X_IOWA_4GB_MICRON_MT53E512M32D2NP_046_WT:
|
|
case LPDDR4X_HOAG_8GB_SAMSUNG_K4UBE3D4AM_MGCJ:
|
|
case LPDDR4X_HOAG_4GB_MICRON_MT53E512M32D2NP_046_WT:
|
|
case LPDDR4X_IOWA_4GB_SAMSUNG_Y:
|
|
case LPDDR4X_IOWA_4GB_SAMSUNG_1Y_X:
|
|
case LPDDR4X_IOWA_8GB_SAMSUNG_1Y_X:
|
|
case LPDDR4X_HOAG_4GB_SAMSUNG_1Y_X:
|
|
case LPDDR4X_IOWA_4GB_SAMSUNG_1Y_Y:
|
|
case LPDDR4X_IOWA_8GB_SAMSUNG_1Y_Y:
|
|
case LPDDR4X_SDS_4GB_SAMSUNG_1Y_A:
|
|
case LPDDR4X_SDS_8GB_SAMSUNG_1Y_X:
|
|
case LPDDR4X_SDS_4GB_SAMSUNG_1Y_X:
|
|
case LPDDR4X_IOWA_4GB_MICRON_1Y_A:
|
|
case LPDDR4X_HOAG_4GB_MICRON_1Y_A:
|
|
case LPDDR4X_SDS_4GB_MICRON_1Y_A:
|
|
_sdram_patch_model_params_t210b01(dramid, (u32 *)buf);
|
|
break;
|
|
}
|
|
return (void *)buf;
|
|
}
|
|
|
|
/*
|
|
* Function: sdram_get_params_patched
|
|
*
|
|
* This code implements a warmboot exploit. Warmboot, that is actually so hot, it burns Nvidia once again.
|
|
* If the boot_rom_patch_control's MSB is set, it uses it as an index to
|
|
* APB_MISC_BASE (u32 array) and sets it to the value of boot_rom_patch_data.
|
|
* (The MSB falls out when it gets multiplied by sizeof(u32)).
|
|
* Because the bootrom does not do any boundary checks, it lets us write anywhere and anything.
|
|
* Ipatch hardware let us apply 12 changes to the bootrom and can be changed any time.
|
|
* The first patch is not needed any more when the exploit is triggered, so we overwrite that.
|
|
* 0x10459E is the address where it returns an error when the signature is not valid.
|
|
* We change that to MOV R0, #0, so we pass the check.
|
|
*
|
|
* Note: The modulus in the header must match and validated.
|
|
*/
|
|
|
|
void *sdram_get_params_patched()
|
|
{
|
|
#define IPATCH_CONFIG(addr, data) ((((addr) - 0x100000) / 2) << 16 | ((data) & 0xffff))
|
|
sdram_params_t210_t *sdram_params = _sdram_get_params_t210();
|
|
|
|
// Disable Warmboot signature check.
|
|
sdram_params->boot_rom_patch_control = BIT(31) | (((IPATCH_BASE + 4) - APB_MISC_BASE) / 4);
|
|
sdram_params->boot_rom_patch_data = IPATCH_CONFIG(0x10459E, 0x2000);
|
|
/*
|
|
// Disable SBK lock.
|
|
sdram_params->emc_bct_spare8 = (IPATCH_BASE + 7 * 4);
|
|
sdram_params->emc_bct_spare9 = IPATCH_CONFIG(0x10210E, 0x2000);
|
|
|
|
// Disable bootrom read lock.
|
|
sdram_params->emc_bct_spare10 = (IPATCH_BASE + 10 * 4);
|
|
sdram_params->emc_bct_spare11 = IPATCH_CONFIG(0x100FDC, 0xF000);
|
|
sdram_params->emc_bct_spare12 = (IPATCH_BASE + 11 * 4);
|
|
sdram_params->emc_bct_spare13 = IPATCH_CONFIG(0x100FDE, 0xE320);
|
|
*/
|
|
return (void *)sdram_params;
|
|
}
|
|
|
|
static void _sdram_init_t210()
|
|
{
|
|
const sdram_params_t210_t *params = (const sdram_params_t210_t *)_sdram_get_params_t210();
|
|
|
|
// Set DRAM voltage.
|
|
max77620_regulator_set_voltage(REGULATOR_SD1, 1100000);
|
|
|
|
// VDDP Select.
|
|
PMC(APBDEV_PMC_VDDP_SEL) = params->pmc_vddp_sel;
|
|
usleep(params->pmc_vddp_sel_wait);
|
|
|
|
// Set DDR pad voltage.
|
|
PMC(APBDEV_PMC_DDR_PWR) = PMC(APBDEV_PMC_DDR_PWR);
|
|
|
|
// Turn on MEM IO Power.
|
|
PMC(APBDEV_PMC_NO_IOPOWER) = params->pmc_no_io_power;
|
|
PMC(APBDEV_PMC_REG_SHORT) = params->pmc_reg_short;
|
|
|
|
PMC(APBDEV_PMC_DDR_CNTRL) = params->pmc_ddr_ctrl;
|
|
|
|
// Patch 1 using BCT spare variables
|
|
if (params->emc_bct_spare0)
|
|
*(vu32 *)params->emc_bct_spare0 = params->emc_bct_spare1;
|
|
|
|
_sdram_config_t210(params);
|
|
}
|
|
|
|
static void _sdram_init_t210b01()
|
|
{
|
|
const sdram_params_t210b01_t *params = (const sdram_params_t210b01_t *)sdram_get_params_t210b01();
|
|
|
|
// VDDP Select.
|
|
PMC(APBDEV_PMC_VDDP_SEL) = params->pmc_vddp_sel;
|
|
usleep(params->pmc_vddp_sel_wait);
|
|
|
|
// Turn on MEM IO Power.
|
|
PMC(APBDEV_PMC_NO_IOPOWER) = params->pmc_no_io_power;
|
|
PMC(APBDEV_PMC_REG_SHORT) = params->pmc_reg_short;
|
|
|
|
PMC(APBDEV_PMC_DDR_CNTRL) = params->pmc_ddr_ctrl;
|
|
|
|
// Patch 1 using BCT spare variables
|
|
if (params->emc_bct_spare0)
|
|
*(vu32 *)params->emc_bct_spare0 = params->emc_bct_spare1;
|
|
|
|
_sdram_config_t210b01(params);
|
|
}
|
|
|
|
void sdram_init()
|
|
{
|
|
// Configure SD regulator for DRAM.
|
|
i2c_send_byte(I2C_5, MAX77620_I2C_ADDR, MAX77620_REG_SD_CFG2, 0x05);
|
|
|
|
if (hw_get_chip_id() == GP_HIDREV_MAJOR_T210)
|
|
_sdram_init_t210();
|
|
else
|
|
_sdram_init_t210b01();
|
|
}
|