/* * Copyright (c) 2018-2020 Atmosphère-NX * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #if defined(ATMOSPHERE_IS_STRATOSPHERE) #include #elif defined(ATMOSPHERE_IS_MESOSPHERE) #include #elif defined(ATMOSPHERE_IS_EXOSPHERE) #include #else #include #endif #include "sdmmc_timer.hpp" #include "sdmmc_sdmmc_controller.board.nintendo_nx.hpp" #include "sdmmc_io_impl.board.nintendo_nx.hpp" namespace ams::sdmmc::impl { /* Lovingly taken from libexosphere. */ namespace i2c_impl { enum Port { Port_1 = 0, /* TODO: Support other ports? */ Port_5 = 4, Port_Count = 5, }; constexpr inline const dd::PhysicalAddress I2c5RegistersAddress = UINT64_C(0x7000D000); constexpr inline const size_t I2c5RegistersSize = 4_KB; namespace { constexpr inline size_t MaxTransferSize = sizeof(u32); constinit std::array g_register_addresses = [] { std::array arr = {}; return arr; }(); void LoadConfig(uintptr_t address) { /* Configure for TIMEOUT and MSTR config load. */ /* NOTE: Nintendo writes value 1 to reserved bit 5 here. This bit is documented as having no meaning. */ /* We will reproduce the write just in case it is undocumented. */ reg::Write(address + I2C_CONFIG_LOAD, I2C_REG_BITS_VALUE(CONFIG_LOAD_RESERVED_BIT_5, 1), I2C_REG_BITS_ENUM (CONFIG_LOAD_TIMEOUT_CONFIG_LOAD, ENABLE), I2C_REG_BITS_ENUM (CONFIG_LOAD_SLV_CONFIG_LOAD, DISABLE), I2C_REG_BITS_ENUM (CONFIG_LOAD_MSTR_CONFIG_LOAD, ENABLE)); /* Wait up to 20 microseconds for the master config to be loaded. */ for (int i = 0; i < 20; ++i) { if (reg::HasValue(address + I2C_CONFIG_LOAD, I2C_REG_BITS_ENUM(CONFIG_LOAD_MSTR_CONFIG_LOAD, DISABLE))) { return; } util::WaitMicroSeconds(1); } } void ClearBus(uintptr_t address) { /* Configure the bus clear register. */ reg::Write(address + I2C_BUS_CLEAR_CONFIG, I2C_REG_BITS_VALUE(BUS_CLEAR_CONFIG_BC_SCLK_THRESHOLD, 9), I2C_REG_BITS_ENUM (BUS_CLEAR_CONFIG_BC_STOP_COND, NO_STOP), I2C_REG_BITS_ENUM (BUS_CLEAR_CONFIG_BC_TERMINATE, IMMEDIATE), I2C_REG_BITS_ENUM (BUS_CLEAR_CONFIG_BC_ENABLE, ENABLE)); /* Load the config. */ LoadConfig(address); /* Wait up to 250us (in 25 us increments) until the bus clear is done. */ for (int i = 0; i < 10; ++i) { if (reg::HasValue(address + I2C_INTERRUPT_STATUS_REGISTER, I2C_REG_BITS_ENUM(INTERRUPT_STATUS_REGISTER_BUS_CLEAR_DONE, SET))) { break; } util::WaitMicroSeconds(25); } /* Read the bus clear status. */ reg::Read(address + I2C_BUS_CLEAR_STATUS); } void InitializePort(uintptr_t address) { /* Calculate the divisor. */ constexpr int Divisor = util::DivideUp(19200, 8 * 400); /* Set the divisor. */ reg::Write(address + I2C_CLK_DIVISOR_REGISTER, I2C_REG_BITS_VALUE(CLK_DIVISOR_REGISTER_STD_FAST_MODE, Divisor - 1), I2C_REG_BITS_VALUE(CLK_DIVISOR_REGISTER_HSMODE, 1)); /* Clear the bus. */ ClearBus(address); /* Clear the status. */ reg::Write(address + I2C_INTERRUPT_STATUS_REGISTER, reg::Read(address + I2C_INTERRUPT_STATUS_REGISTER)); } bool Write(uintptr_t base_address, Port port, int address, const void *src, size_t src_size, bool unused) { AMS_UNUSED(port, unused); /* Ensure we don't write too much. */ u32 data = 0; if (src_size > MaxTransferSize) { return false; } /* Copy the data to a transfer word. */ std::memcpy(std::addressof(data), src, src_size); /* Configure the to write the 7-bit address. */ reg::Write(base_address + I2C_I2C_CMD_ADDR0, I2C_REG_BITS_VALUE(I2C_CMD_ADDR0_7BIT_ADDR, address), I2C_REG_BITS_ENUM (I2C_CMD_ADDR0_7BIT_RW, WRITE)); /* Configure to write the data. */ reg::Write(base_address + I2C_I2C_CMD_DATA1, data); /* Configure to write the correct amount of data. */ reg::Write(base_address + I2C_I2C_CNFG, I2C_REG_BITS_ENUM (I2C_CNFG_DEBOUNCE_CNT, DEBOUNCE_4T), I2C_REG_BITS_ENUM (I2C_CNFG_NEW_MASTER_FSM, ENABLE), I2C_REG_BITS_ENUM (I2C_CNFG_CMD1, WRITE), I2C_REG_BITS_VALUE(I2C_CNFG_LENGTH, src_size - 1)); /* Load the configuration. */ LoadConfig(base_address); /* Start the command. */ reg::ReadWrite(base_address + I2C_I2C_CNFG, I2C_REG_BITS_ENUM(I2C_CNFG_SEND, GO)); /* Wait for the command to be done. */ while (!reg::HasValue(base_address + I2C_I2C_STATUS, I2C_REG_BITS_ENUM(I2C_STATUS_BUSY, NOT_BUSY))) { /* ... */ } /* Check if the transfer was successful. */ return reg::HasValue(base_address + I2C_I2C_STATUS, I2C_REG_BITS_ENUM(I2C_STATUS_CMD1_STAT, SL1_XFER_SUCCESSFUL)); } bool Read(uintptr_t base_address, Port port, void *dst, size_t dst_size, int address, bool unused) { AMS_UNUSED(port, unused); /* Ensure we don't read too much. */ if (dst_size > MaxTransferSize) { return false; } /* Configure the to read the 7-bit address. */ reg::Write(base_address + I2C_I2C_CMD_ADDR0, I2C_REG_BITS_VALUE(I2C_CMD_ADDR0_7BIT_ADDR, address), I2C_REG_BITS_ENUM (I2C_CMD_ADDR0_7BIT_RW, READ)); /* Configure to read the correct amount of data. */ reg::Write(base_address + I2C_I2C_CNFG, I2C_REG_BITS_ENUM (I2C_CNFG_DEBOUNCE_CNT, DEBOUNCE_4T), I2C_REG_BITS_ENUM (I2C_CNFG_NEW_MASTER_FSM, ENABLE), I2C_REG_BITS_ENUM (I2C_CNFG_CMD1, READ), I2C_REG_BITS_VALUE(I2C_CNFG_LENGTH, dst_size - 1)); /* Load the configuration. */ LoadConfig(base_address); /* Start the command. */ reg::ReadWrite(base_address + I2C_I2C_CNFG, I2C_REG_BITS_ENUM(I2C_CNFG_SEND, GO)); /* Wait for the command to be done. */ while (!reg::HasValue(base_address + I2C_I2C_STATUS, I2C_REG_BITS_ENUM(I2C_STATUS_BUSY, NOT_BUSY))) { /* ... */ } /* Check that the transfer was successful. */ if (!reg::HasValue(base_address + I2C_I2C_STATUS, I2C_REG_BITS_ENUM(I2C_STATUS_CMD1_STAT, SL1_XFER_SUCCESSFUL))) { return false; } /* Read and copy out the data. */ u32 data = reg::Read(base_address + I2C_I2C_CMD_DATA1); std::memcpy(dst, std::addressof(data), dst_size); return true; } } void SetRegisterAddress(Port port, uintptr_t address) { g_register_addresses[port] = address; } void Initialize(Port port) { InitializePort(g_register_addresses[port]); } bool Query(void *dst, size_t dst_size, Port port, int address, int r) { const uintptr_t base_address = g_register_addresses[port]; /* Select the register we want to read. */ bool success = Write(base_address, port, address, std::addressof(r), 1, false); if (success) { /* If we successfully selected, read data from the register. */ success = Read(base_address, port, dst, dst_size, address, true); } return success; } bool Send(Port port, int address, int r, const void *src, size_t src_size) { const uintptr_t base_address = g_register_addresses[port]; /* Create a transfer buffer, make sure we can use it. */ u8 buffer[MaxTransferSize]; if (src_size > sizeof(buffer) - 1) { return false; } /* Copy data into the buffer. */ buffer[0] = static_cast(r); std::memcpy(buffer + 1, src, src_size); return Write(base_address, port, address, buffer, src_size + 1, false); } } namespace max7762x { /* The only regulator we care about for SD card power is ldo2. */ constexpr inline const u8 Max77620PwrI2cAddr = 0x3C; constexpr inline const u32 Max77620Ldo2MvStep = 50'000; /* 50 mV (50K uV) steps. */ constexpr inline const u32 Max77620Ldo2MvMin = 800'000; /* 0.8V min voltage. */ constexpr inline const u32 Max77620Ldo2MvDefault = 1'800'000; /* 1.8V default voltage. */ constexpr inline const u32 Max77620Ldo2MvMax = 3'300'000; /* 3.3V max voltage. */ constexpr inline const u8 Max77620Ldo2VoltAddr = 0x27; constexpr inline const u8 Max77620Ldo2CfgAddr = 0x28; constexpr inline const u8 Max77620Ldo2VoltMask = 0x3F; constexpr inline const u8 Max77620Ldo2EnableMask = 0xC0; constexpr inline const u8 Max77620Ldo2EnableShift = 0x6; constexpr inline const u8 Max77620Ldo2StatusMask = 0x00; namespace { #if defined(AMS_SDMMC_THREAD_SAFE) constinit os::SdkMutex g_i2c_init_mutex; #define AMS_SDMMC_LOCK_I2C_INIT_MUTEX() std::scoped_lock lk(g_i2c_init_mutex) #else #define AMS_SDMMC_LOCK_I2C_INIT_MUTEX() #endif constinit bool g_initialized_i2c = false; void EnsureI2cInitialized() { if (AMS_UNLIKELY(!g_initialized_i2c)) { /* Ensure we have exclusive access to the i2c init status. */ AMS_SDMMC_LOCK_I2C_INIT_MUTEX(); if (AMS_LIKELY(!g_initialized_i2c)) { i2c_impl::SetRegisterAddress(i2c_impl::Port_5, dd::QueryIoMapping(i2c_impl::I2c5RegistersAddress, i2c_impl::I2c5RegistersSize)); i2c_impl::Initialize(i2c_impl::Port_5); g_initialized_i2c = true; } } } } bool SetVoltageEnabled(bool en) { /* Ensure that we can use i2c to communicate with the max7762x regulator. */ EnsureI2cInitialized(); /* Read the current value. */ u8 val; if (!i2c_impl::Query(std::addressof(val), sizeof(val), i2c_impl::Port_5, Max77620PwrI2cAddr, Max77620Ldo2VoltAddr)) { return false; } /* Set or clear the enable mask. */ val &= ~Max77620Ldo2EnableMask; if (en) { val |= ((3 << Max77620Ldo2EnableShift) & Max77620Ldo2EnableMask); } /* Write the updated value. */ if (!i2c_impl::Send(i2c_impl::Port_5, Max77620PwrI2cAddr, Max77620Ldo2VoltAddr, std::addressof(val), sizeof(val))) { return false; } /* Wait 1ms for change to take. */ WaitMicroSeconds(1); /* Voltage is now enabled/disabled. */ return true; } bool SetVoltageValue(u32 micro_volts) { /* Ensure that we can use i2c to communicate with the max7762x regulator. */ EnsureI2cInitialized(); /* Check that the value is within range. */ if (micro_volts < Max77620Ldo2MvMin || Max77620Ldo2MvMax < micro_volts) { return false; } /* Determine the mult. */ const u32 mult = util::DivideUp(micro_volts - Max77620Ldo2MvMin, Max77620Ldo2MvStep); /* Read the current value. */ u8 val; if (!i2c_impl::Query(std::addressof(val), sizeof(val), i2c_impl::Port_5, Max77620PwrI2cAddr, Max77620Ldo2VoltAddr)) { return false; } /* Set the new voltage. */ val &= ~Max77620Ldo2VoltMask; val |= (mult & Max77620Ldo2VoltMask); /* Write the updated value. */ if (!i2c_impl::Send(i2c_impl::Port_5, Max77620PwrI2cAddr, Max77620Ldo2VoltAddr, std::addressof(val), sizeof(val))) { return false; } /* Wait 1ms for change to take. */ WaitMicroSeconds(1); /* Voltage is now set. */ return true; } } Result SetSdCardVoltageEnabled(bool en) { /* TODO: A way for this to be non-fatal? */ AMS_ABORT_UNLESS(max7762x::SetVoltageEnabled(en)); return ResultSuccess(); } Result SetSdCardVoltageValue(u32 micro_volts) { /* TODO: A way for this to be non-fatal? */ AMS_ABORT_UNLESS(max7762x::SetVoltageValue(micro_volts)); return ResultSuccess(); } namespace gpio_impl { namespace { constexpr inline dd::PhysicalAddress GpioRegistersPhysicalAddress = 0x6000d000; constexpr inline size_t GpioRegistersSize = 4_KB; enum GpioPadPort { GpioPadPort_A = 0, GpioPadPort_B = 1, GpioPadPort_C = 2, GpioPadPort_D = 3, GpioPadPort_E = 4, GpioPadPort_F = 5, GpioPadPort_G = 6, GpioPadPort_H = 7, GpioPadPort_I = 8, GpioPadPort_J = 9, GpioPadPort_K = 10, GpioPadPort_L = 11, GpioPadPort_M = 12, GpioPadPort_N = 13, GpioPadPort_O = 14, GpioPadPort_P = 15, GpioPadPort_Q = 16, GpioPadPort_R = 17, GpioPadPort_S = 18, GpioPadPort_T = 19, GpioPadPort_U = 20, GpioPadPort_V = 21, GpioPadPort_W = 22, GpioPadPort_X = 23, GpioPadPort_Y = 24, GpioPadPort_Z = 25, GpioPadPort_AA = 26, GpioPadPort_BB = 27, GpioPadPort_CC = 28, GpioPadPort_DD = 29, GpioPadPort_EE = 30, GpioPadPort_FF = 31, }; consteval unsigned int GetInternalGpioPadNumber(GpioPadPort port, unsigned int which) { AMS_ASSUME(which < 8); return (static_cast(port) * 8) + which; } enum InternalGpioPadNumber { InternalGpioPadNumber_E4 = GetInternalGpioPadNumber(GpioPadPort_E, 4), InternalGpioPadNumber_M0 = GetInternalGpioPadNumber(GpioPadPort_M, 0), }; constexpr int ConvertInternalGpioPadNumberToController(InternalGpioPadNumber number) { return (number >> 5); } constexpr int ConvertInternalGpioPadNumberToPort(InternalGpioPadNumber number) { return (number >> 3); } constexpr int ConvertInternalGpioPadNumberToBitIndex(InternalGpioPadNumber number) { return (number & 7); } constexpr int ConvertPortNumberToOffset(int port_number) { return (port_number & 3); } struct PadNameToInternalPadNumberEntry { GpioPadName pad_name; InternalGpioPadNumber internal_number; }; constexpr inline const PadNameToInternalPadNumberEntry PadNameToInternalPadNumberTable[] = { { GpioPadName_PowSdEn, InternalGpioPadNumber_E4 }, }; constexpr InternalGpioPadNumber ConvertPadNameToInternalPadNumber(GpioPadName pad) { const PadNameToInternalPadNumberEntry *target = nullptr; for (const auto &entry : PadNameToInternalPadNumberTable) { if (entry.pad_name == pad) { target = std::addressof(entry); break; } } AMS_ABORT_UNLESS(target != nullptr); return target->internal_number; } enum GpioRegisterType { GpioRegisterType_GPIO_CNF = 0, GpioRegisterType_GPIO_OE = 1, GpioRegisterType_GPIO_OUT = 2, GpioRegisterType_GPIO_IN = 3, GpioRegisterType_GPIO_INT_STA = 4, GpioRegisterType_GPIO_INT_ENB = 5, GpioRegisterType_GPIO_INT_LVL = 6, GpioRegisterType_GPIO_INT_CLR = 7, GpioRegisterType_GPIO_DB_CTRL = 8, GpioRegisterType_GPIO_DB_CNT = 9, }; constexpr inline uintptr_t MaskedWriteAddressOffset = 0x80; constexpr inline int MaskedWriteBitOffset = 8; constexpr uintptr_t GetGpioRegisterAddress(uintptr_t gpio_address, GpioRegisterType reg_type, InternalGpioPadNumber pad_number) { const auto controller = ConvertInternalGpioPadNumberToController(pad_number); const auto port = ConvertInternalGpioPadNumberToPort(pad_number); const auto offset = ConvertPortNumberToOffset(port); switch (reg_type) { default: return gpio_address + (0x100 * controller) + (0x10 * reg_type) + (0x4 * offset); case GpioRegisterType_GPIO_DB_CTRL: return gpio_address + (0x100 * controller) + (0x10 * GpioRegisterType_GPIO_IN) + (0x4 * offset); case GpioRegisterType_GPIO_DB_CNT: return gpio_address + (0x100 * controller) + MaskedWriteAddressOffset + (0x10 * GpioRegisterType_GPIO_INT_CLR) + (0x4 * offset); } } void SetMaskedBit(uintptr_t pad_address, int index, int value) { const uintptr_t mask_address = pad_address + MaskedWriteAddressOffset; reg::Write(mask_address, (1u << (MaskedWriteBitOffset + index)) | (static_cast(value) << index)); } void SetMaskedBits(uintptr_t pad_address, unsigned int mask, unsigned int value) { const uintptr_t mask_address = pad_address + MaskedWriteAddressOffset; reg::Write(mask_address, (mask << MaskedWriteBitOffset) | (value)); } } void OpenSession(GpioPadName pad) { /* Convert the pad to an internal number. */ const auto pad_number = ConvertPadNameToInternalPadNumber(pad); /* Get the gpio registers address. */ const uintptr_t gpio_address = dd::QueryIoMapping(GpioRegistersPhysicalAddress, GpioRegistersSize); /* Configure the pad as GPIO by setting the appropriate bit in CNF. */ const uintptr_t pad_address = GetGpioRegisterAddress(gpio_address, GpioRegisterType_GPIO_CNF, pad_number); const uintptr_t pad_index = ConvertInternalGpioPadNumberToBitIndex(pad_number); SetMaskedBit(pad_address, pad_index, 1); /* Read the pad address to make sure our configuration takes. */ reg::Read(pad_address); } void CloseSession(GpioPadName pad) { /* Nothing needs to be done here, as the only thing official code does is unbind the interrupt event. */ AMS_UNUSED(pad); } void SetDirection(GpioPadName pad, Direction direction) { /* Convert the pad to an internal number. */ const auto pad_number = ConvertPadNameToInternalPadNumber(pad); /* Get the gpio registers address. */ const uintptr_t gpio_address = dd::QueryIoMapping(GpioRegistersPhysicalAddress, GpioRegistersSize); /* Configure the pad direction modifying the appropriate bit in OE. */ const uintptr_t pad_address = GetGpioRegisterAddress(gpio_address, GpioRegisterType_GPIO_OE, pad_number); const uintptr_t pad_index = ConvertInternalGpioPadNumberToBitIndex(pad_number); SetMaskedBit(pad_address, pad_index, direction); /* Read the pad address to make sure our configuration takes. */ reg::Read(pad_address); } void SetValue(GpioPadName pad, GpioValue value) { /* Convert the pad to an internal number. */ const auto pad_number = ConvertPadNameToInternalPadNumber(pad); /* Get the gpio registers address. */ const uintptr_t gpio_address = dd::QueryIoMapping(GpioRegistersPhysicalAddress, GpioRegistersSize); /* Configure the pad value modifying the appropriate bit in OUT. */ const uintptr_t pad_address = GetGpioRegisterAddress(gpio_address, GpioRegisterType_GPIO_OUT, pad_number); const uintptr_t pad_index = ConvertInternalGpioPadNumberToBitIndex(pad_number); SetMaskedBit(pad_address, pad_index, value); /* Read the pad address to make sure our configuration takes. */ reg::Read(pad_address); } } namespace pinmux_impl { namespace { constexpr auto Sdmmc1ClkCmdDat03PadNumber = gpio_impl::InternalGpioPadNumber_M0; constexpr unsigned int Sdmmc1ClkCmdDat03PadMask = 0x3F; constexpr unsigned int Sdmmc1ClkCmdDat03PadCnfGpio = 0x3F; constexpr unsigned int Sdmmc1ClkCmdDat03PadCnfSfio = 0x00; constexpr unsigned int Sdmmc1ClkCmdDat03PadOutHigh = 0x3F; constexpr unsigned int Sdmmc1ClkCmdDat03PadOutLow = 0x00; constexpr unsigned int Sdmmc1ClkCmdDat03PadOeOutput = 0x3F; constexpr unsigned int Sdmmc1ClkCmdDat03PadOeInput = 0x00; struct PinmuxDefinition { u32 reg_offset; u32 mask_val; u32 pm_val; }; /* NOTE: We only use the SDMMC1 pins, which are conveniently the first few... */ constexpr const PinmuxDefinition PinmuxDefinitionMap[] = { {0x00003000, 0x72FF, 0x01}, /* Sdmmc1Clk */ {0x00003004, 0x72FF, 0x02}, /* Sdmmc1Cmd */ {0x00003008, 0x72FF, 0x02}, /* Sdmmc1Dat3 */ {0x0000300C, 0x72FF, 0x02}, /* Sdmmc1Dat2 */ {0x00003010, 0x72FF, 0x02}, /* Sdmmc1Dat1 */ {0x00003014, 0x72FF, 0x01}, /* Sdmmc1Dat0 */ }; enum PinmuxPadIndex { PinmuxPadIndex_Sdmmc1Clk = 0, PinmuxPadIndex_Sdmmc1Cmd = 1, PinmuxPadIndex_Sdmmc1Dat3 = 2, PinmuxPadIndex_Sdmmc1Dat2 = 3, PinmuxPadIndex_Sdmmc1Dat1 = 4, PinmuxPadIndex_Sdmmc1Dat0 = 5, PinmuxPadIndex_Count, }; static_assert(util::size(PinmuxDefinitionMap) == PinmuxPadIndex_Count); consteval const PinmuxDefinition GetDefinition(PinmuxPadIndex pad_index) { AMS_ABORT_UNLESS(pad_index < PinmuxPadIndex_Count); return PinmuxDefinitionMap[pad_index]; } template ALWAYS_INLINE u32 UpdatePinmuxPad(uintptr_t pinmux_base_vaddr) { constexpr const PinmuxDefinition Definition = GetDefinition(PadIndex); /* Fetch this PINMUX's register offset */ constexpr u32 PinmuxRegOffset = Definition.reg_offset; /* Fetch this PINMUX's mask value */ constexpr u32 PinmuxMaskVal = Definition.mask_val; /* Get current register ptr. */ const uintptr_t pinmux_reg = pinmux_base_vaddr + PinmuxRegOffset; /* Read from the PINMUX register */ u32 pinmux_val = reg::Read(pinmux_reg); /* This PINMUX register is locked */ AMS_ABORT_UNLESS((pinmux_val & 0x80) == 0); constexpr u32 PmVal = (PinmuxConfigVal & 0x07); /* Adjust PM */ if constexpr (PinmuxConfigMaskVal & 0x07) { /* Apply additional changes first */ if constexpr (PmVal == 0x05) { /* This pin supports PUPD change */ if constexpr (PinmuxMaskVal & 0x0C) { /* Change PUPD */ if ((pinmux_val & 0x0C) != 0x04) { pinmux_val &= 0xFFFFFFF3; pinmux_val |= 0x04; } } /* This pin supports Tristate change */ if constexpr (PinmuxMaskVal & 0x10) { /* Change Tristate */ if (!(pinmux_val & 0x10)) { pinmux_val |= 0x10; } } /* This pin supports EInput change */ if constexpr (PinmuxMaskVal & 0x40) { /* Change EInput */ if (pinmux_val & 0x40) { pinmux_val &= 0xFFFFFFBF; } } } /* Translate PM value if necessary */ constexpr u32 TranslatedPmVal = (PmVal == 0x04 || PmVal == 0x05 || PmVal >= 0x06) ? Definition.pm_val : PmVal; /* This pin supports PM change */ if constexpr (PinmuxMaskVal & 0x03) { /* Change PM */ if ((pinmux_val & 0x03) != (TranslatedPmVal & 0x03)) { pinmux_val &= 0xFFFFFFFC; pinmux_val |= (TranslatedPmVal & 0x03); } } } constexpr u32 PupdConfigVal = (PinmuxConfigVal & 0x18); /* Adjust PUPD */ if constexpr (PinmuxConfigMaskVal & 0x18) { if constexpr (PupdConfigVal < 0x11) { /* This pin supports PUPD change */ if constexpr (PinmuxMaskVal & 0x0C) { /* Change PUPD */ if (((pinmux_val >> 0x02) & 0x03) != (PupdConfigVal >> 0x03)) { pinmux_val &= 0xFFFFFFF3; pinmux_val |= (PupdConfigVal >> 0x01); } } } } constexpr u32 EodConfigVal = (PinmuxConfigVal & 0x60); /* Adjust EOd field */ if constexpr (PinmuxConfigMaskVal & 0x60) { if constexpr (EodConfigVal == 0x20) { /* This pin supports Tristate change */ if constexpr (PinmuxMaskVal & 0x10) { /* Change Tristate */ if (!(pinmux_val & 0x10)) { pinmux_val |= 0x10; } } /* This pin supports EInput change */ if constexpr (PinmuxMaskVal & 0x40) { /* Change EInput */ if (!(pinmux_val & 0x40)) { pinmux_val |= 0x40; } } /* This pin supports EOd change */ if constexpr (PinmuxMaskVal & 0x800) { /* Change EOd */ if (pinmux_val & 0x800) { pinmux_val &= 0xFFFFF7FF; } } } else if constexpr (EodConfigVal == 0x40) { /* This pin supports Tristate change */ if constexpr (PinmuxMaskVal & 0x10) { /* Change Tristate */ if (pinmux_val & 0x10) { pinmux_val &= 0xFFFFFFEF; } } /* This pin supports EInput change */ if constexpr (PinmuxMaskVal & 0x40) { /* Change EInput */ if (!(pinmux_val & 0x40)) { pinmux_val |= 0x40; } } /* This pin supports EOd change */ if constexpr (PinmuxMaskVal & 0x800) { /* Change EOd */ if (pinmux_val & 0x800) { pinmux_val &= 0xFFFFF7FF; } } } else if constexpr (EodConfigVal == 0x60) { /* This pin supports Tristate change */ if constexpr (PinmuxMaskVal & 0x10) { /* Change Tristate */ if (pinmux_val & 0x10) { pinmux_val &= 0xFFFFFFEF; } } /* This pin supports EInput change */ if constexpr (PinmuxMaskVal & 0x40) { /* Change EInput */ if (!(pinmux_val & 0x40)) { pinmux_val |= 0x40; } } /* This pin supports EOd change */ if constexpr (PinmuxMaskVal & 0x800) { /* Change EOd */ if (!(pinmux_val & 0x800)) { pinmux_val |= 0x800; } } } else { /* This pin supports Tristate change */ if constexpr (PinmuxMaskVal & 0x10) { /* Change Tristate */ if (pinmux_val & 0x10) { pinmux_val &= 0xFFFFFFEF; } } /* This pin supports EInput change */ if constexpr (PinmuxMaskVal & 0x40) { /* Change EInput */ if (pinmux_val & 0x40) { pinmux_val &= 0xFFFFFFBF; } } /* This pin supports EOd change */ if constexpr (PinmuxMaskVal & 0x800) { /* Change EOd */ if (pinmux_val & 0x800) { pinmux_val &= 0xFFFFF7FF; } } } } constexpr u32 LockConfigVal = (PinmuxConfigVal & 0x80); /* Adjust Lock */ if constexpr (PinmuxConfigMaskVal & 0x80) { /* This pin supports Lock change */ if constexpr (PinmuxMaskVal & 0x80) { /* Change Lock */ if ((pinmux_val ^ PinmuxConfigVal) & 0x80) { pinmux_val &= 0xFFFFFF7F; pinmux_val |= LockConfigVal; } } } constexpr u32 IoResetConfigVal = (((PinmuxConfigVal >> 0x08) & 0x1) << 0x10); /* Adjust IoReset */ if constexpr (PinmuxConfigMaskVal & 0x100) { /* This pin supports IoReset change */ if constexpr (PinmuxMaskVal & 0x10000) { /* Change IoReset */ if (((pinmux_val >> 0x10) ^ (PinmuxConfigVal >> 0x08)) & 0x01) { pinmux_val &= 0xFFFEFFFF; pinmux_val |= IoResetConfigVal; } } } constexpr u32 ParkConfigVal = (((PinmuxConfigVal >> 0x0A) & 0x1) << 0x5); /* Adjust Park */ if constexpr (PinmuxConfigMaskVal & 0x400) { /* This pin supports Park change */ if constexpr (PinmuxMaskVal & 0x20) { /* Change Park */ if (((pinmux_val >> 0x05) ^ (PinmuxConfigVal >> 0x0A)) & 0x01) { pinmux_val &= 0xFFFFFFDF; pinmux_val |= ParkConfigVal; } } } constexpr u32 ElpdrConfigVal = (((PinmuxConfigVal >> 0x0B) & 0x1) << 0x08); /* Adjust ELpdr */ if constexpr (PinmuxConfigMaskVal & 0x800) { /* This pin supports ELpdr change */ if constexpr (PinmuxMaskVal & 0x100) { /* Change ELpdr */ if (((pinmux_val >> 0x08) ^ (PinmuxConfigVal >> 0x0B)) & 0x01) { pinmux_val &= 0xFFFFFEFF; pinmux_val |= ElpdrConfigVal; } } } constexpr u32 EhsmConfigVal = (((PinmuxConfigVal >> 0x0C) & 0x1) << 0x09); /* Adjust EHsm */ if constexpr (PinmuxConfigMaskVal & 0x1000) { /* This pin supports EHsm change */ if constexpr (PinmuxMaskVal & 0x200) { /* Change EHsm */ if (((pinmux_val >> 0x09) ^ (PinmuxConfigVal >> 0x0C)) & 0x01) { pinmux_val &= 0xFFFFFDFF; pinmux_val |= EhsmConfigVal; } } } constexpr u32 EIoHvConfigVal = (((PinmuxConfigVal >> 0x09) & 0x1) << 0x0A); /* Adjust EIoHv */ if constexpr (PinmuxConfigMaskVal & 0x200) { /* This pin supports EIoHv change */ if constexpr (PinmuxMaskVal & 0x400) { /* Change EIoHv */ if (((pinmux_val >> 0x0A) ^ (PinmuxConfigVal >> 0x09)) & 0x01) { pinmux_val &= 0xFFFFFBFF; pinmux_val |= EIoHvConfigVal; } } } constexpr u32 EschmtConfigVal = (((PinmuxConfigVal >> 0x0D) & 0x1) << 0x0C); /* Adjust ESchmt */ if constexpr (PinmuxConfigMaskVal & 0x2000) { /* This pin supports ESchmt change */ if constexpr (PinmuxMaskVal & 0x1000) { /* Change ESchmt */ if (((pinmux_val >> 0x0C) ^ (PinmuxConfigVal >> 0x0D)) & 0x01) { pinmux_val &= 0xFFFFEFFF; pinmux_val |= EschmtConfigVal; } } } constexpr u32 PreempConfigVal = (((PinmuxConfigVal >> 0x10) & 0x1) << 0xF); /* Adjust Preemp */ if constexpr (PinmuxConfigMaskVal & 0x10000) { /* This pin supports Preemp change */ if constexpr (PinmuxMaskVal & 0x8000) { /* Change Preemp */ if (((pinmux_val >> 0x0F) ^ (PinmuxConfigVal >> 0x10)) & 0x01) { pinmux_val &= 0xFFFF7FFF; pinmux_val |= PreempConfigVal; } } } constexpr u32 DrvTypeConfigVal = (((PinmuxConfigVal >> 0x0E) & 0x3) << 0xD); /* Adjust DrvType */ if constexpr (PinmuxConfigMaskVal & 0xC000) { /* This pin supports DrvType change */ if constexpr (PinmuxMaskVal & 0x6000) { /* Change DrvType */ if (((pinmux_val >> 0x0D) ^ (PinmuxConfigVal >> 0x0E)) & 0x03) { pinmux_val &= 0xFFFF9FFF; pinmux_val |= DrvTypeConfigVal; } } } /* Write to the appropriate PINMUX register */ reg::Write(pinmux_reg, pinmux_val); /* Do a dummy read from the PINMUX register */ pinmux_val = reg::Read(pinmux_reg); return pinmux_val; } } void SetPinAssignment(PinAssignment assignment) { /* Get the apb registers address. */ const uintptr_t apb_address = dd::QueryIoMapping(ApbMiscRegistersPhysicalAddress, ApbMiscRegistersSize); AMS_UNUSED(apb_address); /* Set the pin assignment. */ switch (assignment) { case PinAssignment_Sdmmc1OutputHigh: { /* Clear Sdmmc1Clk pulldown. */ UpdatePinmuxPad(apb_address); /* Get the gpio registers address. */ const uintptr_t gpio_address = dd::QueryIoMapping(gpio_impl::GpioRegistersPhysicalAddress, gpio_impl::GpioRegistersSize); /* Configure GPIO M0-5 (SDMMC1 CLK + CMD + DAT0/1/2/3) as gpio. */ const uintptr_t cnf_address = gpio_impl::GetGpioRegisterAddress(gpio_address, gpio_impl::GpioRegisterType_GPIO_CNF, Sdmmc1ClkCmdDat03PadNumber); gpio_impl::SetMaskedBits(cnf_address, Sdmmc1ClkCmdDat03PadMask, Sdmmc1ClkCmdDat03PadCnfGpio); /* Configure GPIO M0-5 (SDMMC1 CLK + CMD + DAT0/1/2/3) as high. */ const uintptr_t out_address = gpio_impl::GetGpioRegisterAddress(gpio_address, gpio_impl::GpioRegisterType_GPIO_OUT, Sdmmc1ClkCmdDat03PadNumber); gpio_impl::SetMaskedBits(out_address, Sdmmc1ClkCmdDat03PadMask, Sdmmc1ClkCmdDat03PadOutHigh); /* Configure GPIO M0-5 (SDMMC1 CLK + CMD + DAT0/1/2/3) as output. */ const uintptr_t oe_address = gpio_impl::GetGpioRegisterAddress(gpio_address, gpio_impl::GpioRegisterType_GPIO_OE, Sdmmc1ClkCmdDat03PadNumber); gpio_impl::SetMaskedBits(oe_address, Sdmmc1ClkCmdDat03PadMask, Sdmmc1ClkCmdDat03PadOeOutput); /* Read to be sure that our configuration takes. */ reg::Read(oe_address); } break; case PinAssignment_Sdmmc1ResetState: { /* Get the gpio registers address. */ const uintptr_t gpio_address = dd::QueryIoMapping(gpio_impl::GpioRegistersPhysicalAddress, gpio_impl::GpioRegistersSize); /* Configure GPIO M0-5 (SDMMC1 CLK + CMD + DAT0/1/2/3) as sfio. */ const uintptr_t cnf_address = gpio_impl::GetGpioRegisterAddress(gpio_address, gpio_impl::GpioRegisterType_GPIO_CNF, Sdmmc1ClkCmdDat03PadNumber); gpio_impl::SetMaskedBits(cnf_address, Sdmmc1ClkCmdDat03PadMask, Sdmmc1ClkCmdDat03PadCnfSfio); /* Configure GPIO M0-5 (SDMMC1 CLK + CMD + DAT0/1/2/3) as low. */ const uintptr_t out_address = gpio_impl::GetGpioRegisterAddress(gpio_address, gpio_impl::GpioRegisterType_GPIO_OUT, Sdmmc1ClkCmdDat03PadNumber); gpio_impl::SetMaskedBits(out_address, Sdmmc1ClkCmdDat03PadMask, Sdmmc1ClkCmdDat03PadOutLow); /* Configure GPIO M0-5 (SDMMC1 CLK + CMD + DAT0/1/2/3) as input. */ const uintptr_t oe_address = gpio_impl::GetGpioRegisterAddress(gpio_address, gpio_impl::GpioRegisterType_GPIO_OE, Sdmmc1ClkCmdDat03PadNumber); gpio_impl::SetMaskedBits(oe_address, Sdmmc1ClkCmdDat03PadMask, Sdmmc1ClkCmdDat03PadOeInput); /* Read to be sure that our configuration takes. */ reg::Read(oe_address); /* Set Sdmmc1Clk pulldown. */ UpdatePinmuxPad(apb_address); } break; case PinAssignment_Sdmmc1SchmtEnable: { /* Set Schmitt enable for all pins in the group. */ UpdatePinmuxPad(apb_address); UpdatePinmuxPad(apb_address); UpdatePinmuxPad(apb_address); UpdatePinmuxPad(apb_address); UpdatePinmuxPad(apb_address); UpdatePinmuxPad(apb_address); } break; case PinAssignment_Sdmmc1SchmtDisable: { /* Set Schmitt disable for all pins in the group. */ UpdatePinmuxPad(apb_address); UpdatePinmuxPad(apb_address); UpdatePinmuxPad(apb_address); UpdatePinmuxPad(apb_address); UpdatePinmuxPad(apb_address); UpdatePinmuxPad(apb_address); } break; AMS_UNREACHABLE_DEFAULT_CASE(); } } } }