fusee: implement mariko sdram params saving

This commit is contained in:
hexkyz 2020-11-28 21:09:21 +00:00 committed by Michael Scire
parent 736360e965
commit 5012782237
10 changed files with 6218 additions and 3468 deletions

File diff suppressed because it is too large Load diff

View file

@ -206,7 +206,7 @@ static void config_se_brom(void) {
/* Clear the boot reason to avoid problems later */
pmc->scratch200 = 0;
pmc->reset_status = 0;
pmc->rst_status = 0;
}
void nx_hwinit_erista(bool enable_log) {
@ -318,15 +318,16 @@ void nx_hwinit_erista(bool enable_log) {
/* Configure memory controller carveouts. */
/* NOTE: [4.0.0+] This is now done in the Secure Monitor. */
/* mc_config_carveout(); */
/* Initialize SDRAM. */
sdram_init_erista();
/* Save SDRAM parameters to scratch. */
sdram_save_params_erista(sdram_get_params_erista(fuse_get_dram_id()));
/* Initialize SDRAM. */
sdram_init_erista();
}
void nx_hwinit_mariko(bool enable_log) {
volatile tegra_pmc_t *pmc = pmc_get_regs();
volatile tegra_car_t *car = car_get_regs();
/* Enable SE clock. */
@ -390,14 +391,14 @@ void nx_hwinit_mariko(bool enable_log) {
/* Set super clock burst policy. */
car->sclk_brst_pol = ((car->sclk_brst_pol & 0xFFFF8888) | 0x3333);
/* Mariko only PMC configuration. */
MAKE_PMC_REG(0xBE8) &= 0xFFFFFFFE;
MAKE_PMC_REG(0xBF0) = 0x3;
MAKE_PMC_REG(0xBEC) = 0x3;
/* Initialize SDRAM. */
sdram_init_mariko();
/* Mariko only PMC configuration for TZRAM. */
pmc->tzram_pwr_cntrl &= 0xFFFFFFFE;
pmc->tzram_non_sec_disable = 0x3;
pmc->tzram_sec_disable = 0x3;
/* Save SDRAM parameters to scratch. */
sdram_save_params_mariko(sdram_get_params_mariko(fuse_get_dram_id()));
/* Initialize SDRAM. */
sdram_init_mariko();
}

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff

View file

@ -206,7 +206,7 @@ static void config_se_brom(void) {
/* Clear the boot reason to avoid problems later */
pmc->scratch200 = 0;
pmc->reset_status = 0;
pmc->rst_status = 0;
}
void nx_hwinit_erista(bool enable_log) {
@ -318,15 +318,16 @@ void nx_hwinit_erista(bool enable_log) {
/* Configure memory controller carveouts. */
/* NOTE: [4.0.0+] This is now done in the Secure Monitor. */
/* mc_config_carveout(); */
/* Initialize SDRAM. */
sdram_init_erista();
/* Save SDRAM parameters to scratch. */
sdram_save_params_erista(sdram_get_params_erista(fuse_get_dram_id()));
/* Initialize SDRAM. */
sdram_init_erista();
}
void nx_hwinit_mariko(bool enable_log) {
volatile tegra_pmc_t *pmc = pmc_get_regs();
volatile tegra_car_t *car = car_get_regs();
/* Enable SE clock. */
@ -390,14 +391,14 @@ void nx_hwinit_mariko(bool enable_log) {
/* Set super clock burst policy. */
car->sclk_brst_pol = ((car->sclk_brst_pol & 0xFFFF8888) | 0x3333);
/* Mariko only PMC configuration. */
MAKE_PMC_REG(0xBE8) &= 0xFFFFFFFE;
MAKE_PMC_REG(0xBF0) = 0x3;
MAKE_PMC_REG(0xBEC) = 0x3;
/* Initialize SDRAM. */
sdram_init_mariko();
/* Mariko only PMC configuration for TZRAM. */
pmc->tzram_pwr_cntrl &= 0xFFFFFFFE;
pmc->tzram_non_sec_disable = 0x3;
pmc->tzram_sec_disable = 0x3;
/* Save SDRAM parameters to scratch. */
sdram_save_params_mariko(sdram_get_params_mariko(fuse_get_dram_id()));
/* Initialize SDRAM. */
sdram_init_mariko();
}

File diff suppressed because it is too large Load diff

File diff suppressed because it is too large Load diff